is_post_ct_flow() function will process only ct_state ESTABLISHED,
then offload_pre_check() function will check FLOW_DISSECTOR_KEY_CT flag.
When config tc filter match ct_state(0/0x3f), dissector->used_keys
with FLOW_DISSECTOR_KEY_CT bit, function offload_pre_check() will
return false, so not offload. This is a special case that can be handled
safely.
Therefore, modify to let initial packet which won't go through conntrack
can be offloaded, as long as the cared ct fields are all zero.
Signed-off-by: Wenjuan Geng <wenjuan.geng@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220823090122.403631-1-simon.horman@corigine.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
From 'IEEE Std 802.11-2020 section 11.8.8.4.1':
The mesh channel switch may be triggered by the need to avoid
interference to a detected radar signal, or to reassign mesh STA
channels to ensure the MBSS connectivity.
A 20/40 MHz MBSS may be changed to a 20 MHz MBSS and a 20 MHz
MBSS may be changed to a 20/40 MHz MBSS.
Since the standard allows the change of bandwidth during
the channel switch in mesh, remove the bandwidth check present in
ieee80211_set_csa_beacon.
Fixes: c6da674aff ("{nl,cfg,mac}80211: enable the triggering of CSA frame in mesh")
Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Link: https://lore.kernel.org/r/1658903549-21218-1-git-send-email-quic_haric@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In ieee80211_tx_dequeue() we currently allow a control port
frame to be transmitted on a non-authorized port only if the
A2 matches the local interface address, but if that's an MLD
and the peer is a legacy peer, we need to allow link address
here. Fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For an AP interface, when userspace specifieds the link ID to
transmit the control port frame on (in particular for the
initial 4-way-HS), due to the logic in ieee80211_build_hdr()
for a frame transmitted from/to an MLD, we currently build a
header with
A1 = DA = MLD address of the peer MLD
A2 = local link address (!)
A3 = SA = local MLD address
This clearly makes no sense, and leads to two problems:
- if the frame were encrypted (not true for the initial
4-way-HS) the AAD would be calculated incorrectly
- if iTXQs are used, the frame is dropped by logic in
ieee80211_tx_dequeue()
Fix the addressing, which fixes the first bullet, and the
second bullet for peer MLDs, I'll fix the second one for
non-MLD peers separately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is simple here, and might save drivers some work if
they have common code for TX between beacons and other
frames.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The code for determining which links to update in wmediumd
or virtio was wrong, fix it to remove the deflink only if
there were no old links, and also add the deflink if there
are no other new links.
Fixes: c204d9df02 ("wifi: mac80211_hwsim: handle links for wmediumd/virtio")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To helper drivers if they e.g. have a lookup of the link_sta
pointer, add the link ID to the link_sta structure.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For AP/non-AP the EHT MCS/NSS subfield size differs, the
4-octet subfield is only used for 20 MHz-only non-AP STA.
Pass an argument around everywhere to be able to parse it
properly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The next patch will require splitting the data here into
AP and non-AP because for EHT, the format of the MCS/NSS
support (struct ieee80211_eht_mcs_nss_supp) is different,
for AP the only_20mhz cannot be used.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Draft P802.11be_D2.1, section 35.3.17 states that the EML Capabilities
Field shouldn't be included in case the device doesn't have support for
EMLSR or EMLMR.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When queuing frames to an interface store the link ID we
determined (which possibly came from the driver in the
RX status in the first place) in the RX status, and use
it in the MLME code to send probe responses, beacons and
CSA frames to the right link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In MLO, when the address translation from link to MLD is done
in fw/hw, it is necessary to be able to have some information
on the link on which the frame has been received. Extend the
rx API to include link_id and a valid flag in ieee80211_rx_status.
Also make chanes to mac80211 rx APIs to make use of the reported
link_id after sanity checks.
Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com>
Link: https://lore.kernel.org/r/20220817104213.2531-2-quic_vthiagar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement key installation and lookup (on TX and RX)
for MLO, so we can use multiple GTKs/IGTKs/BIGTKs.
Co-authored-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for various key operations on MLD by adding new parameter
link_id. Pass the link_id received from userspace to driver for add_key,
get_key, del_key, set_default_key, set_default_mgmt_key and
set_default_beacon_key to support configuring keys specific to each MLO
link. Userspace must not specify link ID for MLO pairwise key since it
is common for all the MLO links.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We've already freed the assoc_data at this point, so need
to use another copy of the AP (MLD) address instead.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The Tx queue parameters are per link, so add the link ID
from nl80211 parameters to the API.
While at it, lock the wdev when calling into the driver
so it (and we) can check the link ID appropriately.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When checking for channel regulatory validity, use the
AP link chandef (and not mesh's chandef).
Fixes: 7b0a0e3c3a ("wifi: cfg80211: do some rework towards MLO link APIs")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Based on changes in the specification the TBTT information in
the RNR can include MLD information, so update the parsing to
allow extracting the short SSID information in such a case.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In ieee80211_sta_remove_link, valid_links is set to
the new_links before calling drv_change_sta_links, but
is used for the old_links.
Fixes: cb71f1d136 ("wifi: mac80211: add sta link addition/removal")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If there's no link ID, then check that there are no changes to
the link, and if so accept them, unless a new link is created.
While at it, reject creating a new link without an address.
This fixes authorizing an MLD (peer) that has no link 0.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce a simple helper function to replace a common pattern.
When accessing the GRO header, we fetch the pointer from frag0,
then test its validity and fetch it from the skb when necessary.
This leads to the pattern
skb_gro_header_fast -> skb_gro_header_hard -> skb_gro_header_slow
recurring many times throughout GRO code.
This patch replaces these patterns with a single inlined function
call, improving code readability.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220823071034.GA56142@debian
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It is possible for a malicious device to forgo submitting a Feature
Report. The HID Steam driver presently makes no prevision for this
and de-references the 'struct hid_report' pointer obtained from the
HID devices without first checking its validity. Let's change that.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Fixes: c164d6abf3 ("HID: add driver for Valve Steam Controller")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The return type is supposed to be ssize_t, which is signed long,
but "r" was declared as unsigned int. This means that on 64 bit systems
we return positive values instead of negative error codes.
Fixes: 80a3511d70 ("cfg80211: add debugfs HT40 allow map")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YutvOQeJm0UjLhwU@kili
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
SMB1 server's header_preamble_size is not 0, add use is_smb1 function
to simplify the code, no actual functional changes.
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
It's better to use MID_HEADER_SIZE because the unfolded expression
too long. No actual functional changes, minor readability improvement.
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
It's better to use HEADER_PREAMBLE_SIZE because the unfolded expression
too long. No actual functional changes, minor readability improvement.
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Joanne Koong says:
====================
Add a second bind table hashed by port and address
Currently, there is one bind hashtable (bhash) that hashes by port only.
This patchset adds a second bind table (bhash2) that hashes by port and
address.
The motivation for adding bhash2 is to expedite bind requests in situations
where the port has many sockets in its bhash table entry (eg a large number
of sockets bound to different addresses on the same port), which makes checking
bind conflicts costly especially given that we acquire the table entry spinlock
while doing so, which can cause softirq cpu lockups and can prevent new tcp
connections.
We ran into this problem at Meta where the traffic team binds a large number
of IPs to port 443 and the bind() call took a significant amount of time
which led to cpu softirq lockups, which caused packet drops and other failures
on the machine.
When experimentally testing this on a local server for ~24k sockets bound to
the port, the results seen were:
ipv4:
before - 0.002317 seconds
with bhash2 - 0.000020 seconds
ipv6:
before - 0.002431 seconds
with bhash2 - 0.000021 seconds
The additions to the initial bhash2 submission [0] are:
* Updating bhash2 in the cases where a socket's rcv saddr changes after it has
* been bound
* Adding locks for bhash2 hashbuckets
[0] https://lore.kernel.org/netdev/20220520001834.2247810-1-kuba@kernel.org/
v3: https://lore.kernel.org/netdev/20220722195406.1304948-2-joannelkoong@gmail.com/
v2: https://lore.kernel.org/netdev/20220712235310.1935121-1-joannelkoong@gmail.com/
v1: https://lore.kernel.org/netdev/20220623234242.2083895-2-joannelkoong@gmail.com/
====================
Link: https://lore.kernel.org/r/20220822181023.3979645-1-joannelkoong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds 2 new tests: sk_bind_sendto_listen and
sk_connect_zero_addr.
The sk_bind_sendto_listen test exercises the path where a socket's
rcv saddr changes after it has been added to the binding tables,
and then a listen() on the socket is invoked. The listen() should
succeed.
The sk_bind_sendto_listen test is copied over from one of syzbot's
tests: https://syzkaller.appspot.com/x/repro.c?x=1673a38df00000
The sk_connect_zero_addr test exercises the path where the socket was
never previously added to the binding tables and it gets assigned a
saddr upon a connect() to address 0.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test populates the bhash table for a given port with
MAX_THREADS * MAX_CONNECTIONS sockets, and then times how long
a bind request on the port takes.
When populating the bhash table, we create the sockets and then bind
the sockets to the same address and port (SO_REUSEADDR and SO_REUSEPORT
are set). When timing how long a bind on the port takes, we bind on a
different address without SO_REUSEPORT set. We do not set SO_REUSEPORT
because we are interested in the case where the bind request does not
go through the tb->fastreuseport path, which is fragile (eg
tb->fastreuseport path does not work if binding with a different uid).
To run the script:
Usage: ./bind_bhash.sh [-6 | -4] [-p port] [-a address]
6: use ipv6
4: use ipv4
port: Port number
address: ip address
Without any arguments, ./bind_bhash.sh defaults to ipv6 using ip address
"2001:0db8:0:f101::1" on port 443.
On my local machine, I see:
ipv4:
before - 0.002317 seconds
with bhash2 - 0.000020 seconds
ipv6:
before - 0.002431 seconds
with bhash2 - 0.000021 seconds
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current bind hashtable (bhash) is hashed by port only.
In the socket bind path, we have to check for bind conflicts by
traversing the specified port's inet_bind_bucket while holding the
hashbucket's spinlock (see inet_csk_get_port() and
inet_csk_bind_conflict()). In instances where there are tons of
sockets hashed to the same port at different addresses, the bind
conflict check is time-intensive and can cause softirq cpu lockups,
as well as stops new tcp connections since __inet_inherit_port()
also contests for the spinlock.
This patch adds a second bind table, bhash2, that hashes by
port and sk->sk_rcv_saddr (ipv4) and sk->sk_v6_rcv_saddr (ipv6).
Searching the bhash2 table leads to significantly faster conflict
resolution and less time holding the hashbucket spinlock.
Please note a few things:
* There can be the case where the a socket's address changes after it
has been bound. There are two cases where this happens:
1) The case where there is a bind() call on INADDR_ANY (ipv4) or
IPV6_ADDR_ANY (ipv6) and then a connect() call. The kernel will
assign the socket an address when it handles the connect()
2) In inet_sk_reselect_saddr(), which is called when rebuilding the
sk header and a few pre-conditions are met (eg rerouting fails).
In these two cases, we need to update the bhash2 table by removing the
entry for the old address, and add a new entry reflecting the updated
address.
* The bhash2 table must have its own lock, even though concurrent
accesses on the same port are protected by the bhash lock. Bhash2 must
have its own lock to protect against cases where sockets on different
ports hash to different bhash hashbuckets but to the same bhash2
hashbucket.
This brings up a few stipulations:
1) When acquiring both the bhash and the bhash2 lock, the bhash2 lock
will always be acquired after the bhash lock and released before the
bhash lock is released.
2) There are no nested bhash2 hashbucket locks. A bhash2 lock is always
acquired+released before another bhash2 lock is acquired+released.
* The bhash table cannot be superseded by the bhash2 table because for
bind requests on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6), every socket
bound to that port must be checked for a potential conflict. The bhash
table is the only source of port->socket associations.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix crash with malformed ebtables blob which do not provide all
entry points, from Florian Westphal.
2) Fix possible TCP connection clogging up with default 5-days
timeout in conntrack, from Florian.
3) Fix crash in nf_tables tproxy with unsupported chains, also from Florian.
4) Do not allow to update implicit chains.
5) Make table handle allocation per-netns to fix data race.
6) Do not truncated payload length and offset, and checksum offset.
Instead report EINVAl.
7) Enable chain stats update via static key iff no error occurs.
8) Restrict osf expression to ip, ip6 and inet families.
9) Restrict tunnel expression to netdev family.
10) Fix crash when trying to bind again an already bound chain.
11) Flowtable garbage collector might leave behind pending work to
delete entries. This patch comes with a previous preparation patch
as dependency.
12) Allow net.netfilter.nf_conntrack_frag6_high_thresh to be lowered,
from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_defrag_ipv6: allow nf_conntrack_frag6_high_thresh increases
netfilter: flowtable: fix stuck flows on cleanup due to pending work
netfilter: flowtable: add function to invoke garbage collection immediately
netfilter: nf_tables: disallow binding to already bound chain
netfilter: nft_tunnel: restrict it to netdev family
netfilter: nft_osf: restrict osf to ipv4, ipv6 and inet families
netfilter: nf_tables: do not leave chain stats enabled on error
netfilter: nft_payload: do not truncate csum_offset and csum_type
netfilter: nft_payload: report ERANGE for too long offset and length
netfilter: nf_tables: make table handle allocation per-netns friendly
netfilter: nf_tables: disallow updates of implicit chain
netfilter: nft_tproxy: restrict to prerouting hook
netfilter: conntrack: work around exceeded receive window
netfilter: ebtables: reject blobs that don't provide all entry points
====================
Link: https://lore.kernel.org/r/20220824220330.64283-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit c078290a2b ("selftests: include bonding tests into the kselftest
infra") adds the bonding tests in the directory:
tools/testing/selftests/drivers/net/bonding/
The file entry in MAINTAINERS for the BONDING DRIVER however refers to:
tools/testing/selftests/net/bonding/
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken file pattern.
Repair this file entry in BONDING DRIVER.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/20220824072945.28606-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
davinci_mdio.c uses mdio bitbang APIs, so it should select
MDIO_BITBANG to prevent build errors.
arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdio_remove':
drivers/net/ethernet/ti/davinci_mdio.c:649: undefined reference to `free_mdio_bitbang'
arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdio_probe':
drivers/net/ethernet/ti/davinci_mdio.c:545: undefined reference to `alloc_mdio_bitbang'
arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdiobb_read':
drivers/net/ethernet/ti/davinci_mdio.c:236: undefined reference to `mdiobb_read'
arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdiobb_write':
drivers/net/ethernet/ti/davinci_mdio.c:253: undefined reference to `mdiobb_write'
Fixes: d04807b806 ("net: ethernet: ti: davinci_mdio: Add workaround for errata i2329")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ravi Gunasekaran <r-gunasekaran@ti.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20220824024216.4939-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stephen Rothwell reported htmldocs warning when merging net-next tree:
Documentation/admin-guide/sysctl/net.rst:37: WARNING: Malformed table.
Text in column margin in table line 4.
========= =================== = ========== ==================
Directory Content Directory Content
========= =================== = ========== ==================
802 E802 protocol mptcp Multipath TCP
appletalk Appletalk protocol netfilter Network Filter
ax25 AX25 netrom NET/ROM
bridge Bridging rose X.25 PLP layer
core General parameter tipc TIPC
ethernet Ethernet protocol unix Unix domain sockets
ipv4 IP version 4 x25 X.25 protocol
ipv6 IP version 6
========= =================== = ========== ==================
The warning above is caused by cells in second "Content" column of
/proc/sys/net subdirectory table which are in column margin.
Align these cells against the column header to fix the warning.
Link: https://lore.kernel.org/linux-next/20220823134905.57ed08d5@canb.auug.org.au/
Fixes: 1202cdd665 ("Remove DECnet support from kernel")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20220824035804.204322-1-bagasdotme@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull MD fixes from Song:
"1. Fix for clustered raid, by Guoqing Jiang.
2. req_op fix, by Bart Van Assche.
3. Fix race condition in raid recreate, by David Sloan."
* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: call __md_stop_writes in md_stop
Revert "md-raid: destroy the bitmap after destroying the thread"
md: Flush workqueue md_rdev_misc_wq in md_alloc()
md/raid10: Fix the data type of an r10_sync_page_io() argument
