Fbdev's framebuffer stores a pointer to the GEM object. Remove
struct exynos_drm_fbdev.exynos_gem, which contains the same value.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Xin Long says:
====================
sctp: add some missing peer_capables in sctp info dump
The 1st patch removes the unused and obsolete hostname_address from
sctp_association peer and also the bit from sctp_info peer_capables,
and then reuses its bit for reconf_capable and use the higher
available bit for intl_capable in the 2nd patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two new peer capables have been added since sctp_diag was
introduced into SCTP. When dumping the peer capables, these two new
peer capables should also be included. To not break the old capables,
reconf_capable takes the old hostname_address bit, and intl_capable
uses the higher available bit in sctpi_peer_capable.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the latest RFC9260, the Host Name Address param has been deprecated.
For INIT chunk:
Note 3: An INIT chunk MUST NOT contain the Host Name Address
parameter. The receiver of an INIT chunk containing a Host Name
Address parameter MUST send an ABORT chunk and MAY include an
"Unresolvable Address" error cause.
For Supported Address Types:
The value indicating the Host Name Address parameter MUST NOT be
used when sending this parameter and MUST be ignored when receiving
this parameter.
Currently Linux SCTP doesn't really support Host Name Address param,
but only saves some flag and print debug info, which actually won't
even be triggered due to the verification in sctp_verify_param().
This patch is to delete those dead code.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts says:
====================
mptcp: various small cleanups
Patch 1 makes a function static because it is only used in one file.
Patch 2 adds info about the git trees we use to help occasional devs.
Patch 3 removes an unused variable.
Patch 4 removes duplicated entries from the help menu of a tool used in
MPTCP selftests.
Patch 5 removes some ShellCheck warnings in mptcp_join.sh selftest.
Only very minor improvements then.
====================
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the code had an issue according to ShellCheck.
That's mainly due to the fact it incorrectly believes most of the code
was unreachable because it's invoked by variable name, see how the
"tests" array is used.
Once SC2317 has been ignored, three small warnings were still visible:
- SC2155: Declare and assign separately to avoid masking return values.
- SC2046: Quote this to prevent word splitting: can be ignored because
"ip netns pids" can display more than one pid.
- SC2166: Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
This probably didn't fix any actual issues but it might help spotting
new interesting warnings reported by ShellCheck as just before,
ShellCheck was reporting issues for most lines making it a bit useless.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_connect tool was printing some duplicated entries when showing how
to use it: -j -l -r
While at it, I also:
- moved the very few entries that were not sorted,
- added -R that was missing since
commit 8a4b910d00 ("mptcp: selftests: add rcvbuf set option"),
- removed the -u parameter that has been removed in
commit f730b65c9d ("selftests: mptcp: try to set mptcp ulp mode in different sk states").
No need to backport this, it is just an internal tool used by our
selftests. The help menu is mainly useful for MPTCP kernel devs.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some functions, 'remaining' variable was given in argument and/or set
but never read.
net/mptcp/options.c:779:3: warning: Value stored to 'remaining' is never
read [clang-analyzer-deadcode.DeadStores].
net/mptcp/options.c:547:3: warning: Value stored to 'remaining' is never
read [clang-analyzer-deadcode.DeadStores].
The issue has been reported internally by Alibaba CI.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Suggested-by: Mat Martineau <martineau@kernel.org>
Co-developed-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_userspace_pm_append_new_local_addr() has always exclusively been
used in pm_userspace.c since its introduction in
commit 4638de5aef ("mptcp: handle local addrs announced by userspace PMs").
So make it static.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a use-after-free scenario that is:
When the NIC is down, user set mac address or vlan tag to VF,
the xxx_set_vf_mac() or xxx_set_vf_vlan() will invoke efx_net_stop()
and efx_net_open(), since netif_running() is false, the port will not
start and keep port_enabled false, but selftest_work is scheduled
in efx_net_open().
If we remove the device before selftest_work run, the efx_stop_port()
will not be called since the NIC is down, and then efx is freed,
we will soon get a UAF in run_timer_softirq() like this:
[ 1178.907941] ==================================================================
[ 1178.907948] BUG: KASAN: use-after-free in run_timer_softirq+0xdea/0xe90
[ 1178.907950] Write of size 8 at addr ff11001f449cdc80 by task swapper/47/0
[ 1178.907950]
[ 1178.907953] CPU: 47 PID: 0 Comm: swapper/47 Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1
[ 1178.907954] Hardware name: SANGFOR X620G40/WI2HG-208T1061A, BIOS SPYH051032-U01 04/01/2022
[ 1178.907955] Call Trace:
[ 1178.907956] <IRQ>
[ 1178.907960] dump_stack+0x71/0xab
[ 1178.907963] print_address_description+0x6b/0x290
[ 1178.907965] ? run_timer_softirq+0xdea/0xe90
[ 1178.907967] kasan_report+0x14a/0x2b0
[ 1178.907968] run_timer_softirq+0xdea/0xe90
[ 1178.907971] ? init_timer_key+0x170/0x170
[ 1178.907973] ? hrtimer_cancel+0x20/0x20
[ 1178.907976] ? sched_clock+0x5/0x10
[ 1178.907978] ? sched_clock_cpu+0x18/0x170
[ 1178.907981] __do_softirq+0x1c8/0x5fa
[ 1178.907985] irq_exit+0x213/0x240
[ 1178.907987] smp_apic_timer_interrupt+0xd0/0x330
[ 1178.907989] apic_timer_interrupt+0xf/0x20
[ 1178.907990] </IRQ>
[ 1178.907991] RIP: 0010:mwait_idle+0xae/0x370
If the NIC is not actually brought up, there is no need to schedule
selftest_work, so let's move invoking efx_selftest_async_start()
into efx_start_all(), and it will be canceled by broughting down.
Fixes: dd40781e3a ("sfc: Run event/IRQ self-test asynchronously when interface is brought up")
Fixes: e340be9230 ("sfc: add ndo_set_vf_mac() function for EF10")
Debugged-by: Huang Cun <huangcun@sangfor.com.cn>
Cc: Donglin Peng <pengdonglin@sangfor.com.cn>
Suggested-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts says:
====================
mptcp: refactor first subflow init
This series refactors the initialisation of the first subflow of a
listen socket. The first subflow allocation is no longer done at the
initialisation of the socket but later, when the connection request is
received or when requested by the userspace.
This is needed not just because Paolo likes to refactor things but
because this simplifies the code and makes the behaviour more consistent
with the rest. Also, this is a prerequisite for future patches adding
proper support of SELinux/LSM labels with MPTCP and accept(2).
In [1], Ondrej Mosnacek explained they discovered the (userspace-facing)
sockets returned by accept(2) when using MPTCP always end up with the
label representing the kernel (typically system_u:system_r:kernel_t:s0),
while it would make more sense to inherit the context from the parent
socket (the one that is passed to accept(2)).
Before being able to properly support that on SELinux/LSM side, patches
2-3/5 prepare the code to simplify the patch 4/5 moving the allocation.
Patch 1/5 is a small clean-up seen while working on the series and patch
5/5 is a small improvement when closing unaccepted sockets.
[1] https://lore.kernel.org/netdev/CAFqZXNs2LF-OoQBUiiSEyranJUXkPLcCfBkMkwFeM6qEwMKCTw@mail.gmail.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When cleaning up unaccepted mptcp socket still laying inside
the listener queue at listener close time, such sockets will
go through a regular close, waiting for a timeout before
shutting down the subflows.
There is no need to keep the kernel resources in use for
such a possibly long time: short-circuit to fast-close.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the long run this will simplify the mptcp code and will
allow for more consistent behavior. Move the first subflow
allocation out of the sock->init ops into the __mptcp_nmpc_socket()
helper.
Since the first subflow creation can now happen after the first
setsockopt() we additionally need to invoke mptcp_sockopt_sync()
on it.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
So that we can avoid a bunch of check in fastpath. Additionally we
can specialize such check according to the specific fastopen method
- defer_connect vs MSG_FASTOPEN.
The latter bits will simplify the next patches.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a few spots, the mptcp code invokes the __mptcp_nmpc_socket() helper
multiple times under the same socket lock scope. Additionally, in such
places, the socket status ensures that there is no MP capable handshake
running.
Under the above condition we can replace the later __mptcp_nmpc_socket()
helper invocation with direct access to the msk->subflow pointer and
better document such access is not supposed to fail with WARN().
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlx5-updates-2023-04-14
Yevgeny Kliteynik Says:
=======================
SW Steering: Support pattern/args modify_header actions
The following patch series adds support for a new pattern/arguments type
of modify_header actions.
Starting with ConnectX-6 DX, we use a new design of modify_header FW object.
The current modify_header object allows for having only limited number of
these FW objects, which means that we are limited in the number of offloaded
flows that require modify_header action.
The new approach comprises of two types of objects: pattern and argument.
Pattern holds header modification templates, later used with corresponding
argument object to create complete header modification actions.
The pattern indicates which headers are modified, while the arguments
provide the specific values.
Therefore a single pattern can be used with different arguments in different
flows, enabling offloading of large number of modify_header flows.
- Patch 1, 2: Add ICM pool for modify-header-pattern objects and implement
patterns cache, allowing patterns reuse for different flows
- Patch 3: Allow for chunk allocation separately for STEv0 and STEv1
- Patch 4: Read related device capabilities
- Patch 5: Add create/destroy functions for the new general object type
- Patch 6: Add support for writing modify header argument to ICM
- Patch 7, 8: Some required fixes to support pattern/arg - separate read
buffer from the write buffer and fix QP continuous allocation
- Patch 9: Add pool for modify header arg objects
- Patch 10, 11, 12: Implement MODIFY_HEADER and TNL_L3_TO_L2 actions with
the new patterns/args design
- Patch 13: Optimization - set modify header action of size 1 directly on
the STE instead of separate pattern/args combination
- Patch 14: Adjust debug dump for patterns/args
- Patch 15: Enable patterns and arguments for supporting devices
=======================
Aaron Conole says:
====================
selftests: openvswitch: add support for testing upcall interface
The existing selftest suite for openvswitch will work for regression
testing the datapath feature bits, but won't test things like adding
interfaces, or the upcall interface. Here, we add some additional
test facilities.
First, extend the ovs-dpctl.py python module to support the OVS_FLOW
and OVS_PACKET netlink families, with some associated messages. These
can be extended over time, but the initial support is for more well
known cases (output, userspace, and CT).
Next, extend the test suite to test upcalls by adding a datapath,
monitoring the upcall socket associated with the datapath, and then
dumping any upcalls that are received. Compare with expected ARP
upcall via arping.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The upcall socket interface can be exercised now to make sure that
future feature adjustments to the field can maintain backwards
compatibility.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a basic set of fields to print in a 'dpflow' format. This will be
used by future commits to check for flow fields after parsing, as
well as verifying the flow fields pushed into the kernel from
userspace.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Includes an associated test to generate netns and connect
interfaces, with the option to include packet tracing.
This will be used in the future when flow support is added
for additional test cases.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the 1PPS output was enabled and then lan8841 was configured to be a
follower, then target clock which is used to generate the 1PPS was not
configure correctly. The problem was that for each adjustments of the
time, also the nanosecond part of the target clock was changed.
Therefore the initial nanosecond part of the target clock was changed.
The issue can be observed if both the leader and the follower are
generating 1PPS and see that their PPS are not aligned even if the time
is allined.
The fix consists of not modifying the nanosecond part of the target
clock when adjusting the time. In this way the 1PPS get also aligned.
Fixes: e4ed8ba08e ("net: phy: micrel: Add support for PTP_PF_PEROUT for lan8841")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here we copy the data from the original buf to the new page. But we
not check that it may be overflow.
As long as the size received(including vnethdr) is greater than 3840
(PAGE_SIZE -VIRTIO_XDP_HEADROOM). Then the memcpy will overflow.
And this is completely possible, as long as the MTU is large, such
as 4096. In our test environment, this will cause crash. Since crash is
caused by the written memory, it is meaningless, so I do not include it.
Fixes: 72979a6c35 ("virtio_net: xdp, add slowpath case for non contiguous buffers")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When HuC is loaded by GSC, there is no header definition for the kernel
to look at and firmware is just handed to GSC. However when reading the
version, it should still check the size of the blob to guarantee it's not
incurring into out-of-bounds array access.
If firmware is smaller than expected, the following message is now
printed:
# echo boom > /lib/firmware/i915/dg2_huc_gsc.bin
# dmesg | grep -i huc
[drm] GT0: HuC firmware i915/dg2_huc_gsc.bin: invalid size: 5 < 184
[drm] *ERROR* GT0: HuC firmware i915/dg2_huc_gsc.bin: fetch failed -ENODATA
...
Even without this change the size, header and signature are still
checked by GSC when loading, so this only avoids the out-of-bounds array
access.
Fixes: a7b516bd98 ("drm/i915/huc: Add fetch support for gsc-loaded HuC binary")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413200349.3492571-1-lucas.demarchi@intel.com
(cherry picked from commit adfbae9ffe)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Commit 27f2a4db76 ("Makefile: fix GDB warning with CONFIG_RELR")
added --use-android-relr-tags to fix a GDB warning
BFD: /android0/linux-next/vmlinux: unknown type [0x13] section `.relr.dyn'
The GDB warning has been fixed in version 11.2.
The DT_ANDROID_RELR tag was deprecated since DT_RELR was standardized.
Thus, --use-android-relr-tags should be removed. While making the
change, try -z pack-relative-relocs, which is supported since LLD 15.
Keep supporting --pack-dyn-relocs=relr as well for older LLD versions.
There is no indication of obsolescence for --pack-dyn-relocs=relr.
As of today, GNU ld supports the latter option for x86 and powerpc64
ports and has no intention to support --pack-dyn-relocs=relr. In the
absence of the glibc symbol version GLIBC_ABI_DT_RELR,
--pack-dyn-relocs=relr and -z pack-relative-relocs are identical in
ld.lld.
GNU ld and newer versions of LLD report warnings (instead of errors) for
unknown -z options. Only errors lead to non-zero exit codes. Therefore,
we should test --pack-dyn-relocs=relr before testing
-z pack-relative-relocs.
Link: https://github.com/ClangBuiltLinux/linux/issues/1057
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=a619b58721f0a03fd91c27670d3e4c2fb0d88f1e
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The target triple is overridden by the user-supplied CROSS_COMPILE,
but I do not see a good reason to support it. Users can use a new
architecture without adding CLANG_TARGET_FLAGS_*, but that would be
a rare case.
Use the hard-coded and deterministic target triple all the time.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
In the builddeb context, the DEB_HOST_ARCH environment variable is set
to the same value as debian/arch's content, so use the variable with
dpkg-architecture.
This is the last use of the debian/arch file during dpkg-buildpackage time.
Signed-off-by: Bastian Germann <bage@linutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 010a0aad39 ("kallsyms: Correctly sequence symbols when
CONFIG_LTO_CLANG=y") added --lto-clang, and updated the usage()
function, but not the comment. Update it in the same way.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Currently, expand_symbol() is called many times to get the uncompressed
symbol names for sorting, and also for adding comments.
With the output order shuffled in the previous commit, the symbol data
are now written in the following order:
(1) kallsyms_num_syms
(2) kallsyms_names <-- need compressed names
(3) kallsyms_markers
(4) kallsyms_token_table
(5) kallsyms_token_index
(6) kallsyms_addressed / kallsyms_offsets <-- need uncompressed names (for commenting)
(7) kallsyms_relative_base
(8) kallsyms_seq_of_names <-- need uncompressed names (for sorting)
The compressed names are only needed by (2).
Call expand_symbol() between (2) and (3) to restore the original symbol
names. This requires just one expand_symbol() call for each symbol.
Call cleanup_symbol_name() between (7) and (8) instead of during sorting.
It is allowed to overwrite the ->sym field because (8) just outputs the
index instead of the name of each symbol. Again, this requires just one
cleanup_symbol_name() call for each symbol.
This refactoring makes it ~30% faster.
[Before]
$ time scripts/kallsyms --all-symbols --absolute-percpu --base-relative \
.tmp_vmlinux.kallsyms2.syms >/dev/null
real 0m1.027s
user 0m1.010s
sys 0m0.016s
[After]
$ time scripts/kallsyms --all-symbols --absolute-percpu --base-relative \
.tmp_vmlinux.kallsyms2.syms >/dev/null
real 0m0.717s
user 0m0.717s
sys 0m0.000s
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, this tool outputs symbol data in the following order.
(1) kallsyms_addressed / kallsyms_offsets
(2) kallsyms_relative_base
(3) kallsyms_num_syms
(4) kallsyms_names
(5) kallsyms_markers
(6) kallsyms_seq_of_names
(7) kallsyms_token_table
(8) kallsyms_token_index
This commit changes the order as follows:
(1) kallsyms_num_syms
(2) kallsyms_names
(3) kallsyms_markers
(4) kallsyms_token_table
(5) kallsyms_token_index
(6) kallsyms_addressed / kallsyms_offsets
(7) kallsyms_relative_base
(8) kallsyms_seq_of_names
The motivation is to decrease the number of function calls to
expand_symbol() and cleanup_symbol_name().
The compressed names are only required for writing 'kallsyms_names'.
If you do this first, we can restore the original symbol names.
You do not need to repeat the same operation over again.
The actual refactoring will happen in the next commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
scripts/kallsyms.c maintains compiler-generated symbols, but we end up
with something similar in scripts/mksysmap to avoid the "Inconsistent
kallsyms data" error. For example, commit c17a253870 ("mksysmap: Fix
the mismatch of 'L0' symbols in System.map").
They were separately maintained prior to commit 94ff2f63d6 ("kbuild:
reuse mksysmap output for kallsyms").
Now that scripts/kallsyms.c parses the output of scripts/mksysmap,
it makes more sense to collect all the ignored patterns to mksysmap.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Drop the symbols generated by scripts/kallsyms itself automatically
instead of maintaining the symbol list manually.
Pass the kallsyms object from the previous kallsyms step (if it exists)
as the third parameter of scripts/mksysmap, which will weed out the
generated symbols from the input to the next kallsyms step.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
It is not feasible to insert comments in a multi-line shell command.
Use sed, and move comments close to the code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The symbol types 'U' and 'N' are already filtered out by the following
line in scripts/mksysmap:
-e ' [aNUw] '
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The assembler output of kallsyms.c is not meant for people to understand,
and is generally not helpful when debugging "Inconsistent kallsyms data"
warnings. I have previously struggled with these, but found it helpful
to list which symbols changed between the first and second pass in the
.tmp_vmlinux.kallsyms*.S files.
As this file is preprocessed, it's possible to add a C-style multiline
comment with the full type/name tuple.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
