Kevin Brodsky says:
====================
net: Finish up ->msg_control{,_user} split
Commit 1f466e1f15 ("net: cleanly handle kernel vs user buffers for
->msg_control") introduced the msg_control_user and
msg_control_is_user fields in struct msghdr, to ensure that user
pointers are represented as such. It also took care of converting most
users of struct msghdr::msg_control where user pointers are involved. It
did however miss a number of cases, and some code using msg_control
inappropriately has also appeared in the meantime.
This series is attempting to complete the split, by eliminating the
remaining cases where msg_control is used when in fact a user
pointer is stored in the union (patch 1).
It also addresses a couple of issues with msg_control_is_user: one where
it is not updated as it should (patch 2), and one where it is not
initialised (patch 3).
v1..v2:
* Split out the msg_control_is_user fixes into separate patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
do_ipv6_setsockopt() makes use of struct msghdr::msg_control in the
IPV6_2292PKTOPTIONS case. Make sure to initialise
msg_control_is_user accordingly.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
cmsghdr_from_user_compat_to_kern() is an unusual case w.r.t. how
the kmsg->msg_control* fields are used. The input struct msghdr
holds a pointer to a user buffer, i.e. ksmg->msg_control_user is
active. However, upon success, a kernel pointer is stored in
kmsg->msg_control. kmsg->msg_control_is_user should therefore be
updated accordingly.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 1f466e1f15 ("net: cleanly handle kernel vs user
buffers for ->msg_control"), pointers to user buffers should be
stored in struct msghdr::msg_control_user, instead of the
msg_control field. Most users of msg_control have already been
converted (where user buffers are involved), but not all of them.
This patch attempts to address the remaining cases. An exception is
made for null checks, as it should be safe to use msg_control
unconditionally for that purpose.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This replaces 'skb_queue_tail()' with 'virtio_vsock_skb_queue_tail()'.
The first one uses 'spin_lock_irqsave()', second uses 'spin_lock_bh()'.
There is no need to disable interrupts in the loopback transport as
there is no access to the queue with skbs from interrupt context. Both
virtio and vhost transports work in the same way.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the TCA_QFQ_LMAX value is not offered through nlattr, lmax is determined by the MTU value of the network device.
The MTU of the loopback device can be set up to 2^31-1.
As a result, it is possible to have an lmax value that exceeds QFQ_MIN_LMAX.
Due to the invalid lmax value, an index is generated that exceeds the QFQ_MAX_INDEX(=24) value, causing out-of-bounds read/write errors.
The following reports a oob access:
[ 84.582666] BUG: KASAN: slab-out-of-bounds in qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[ 84.583267] Read of size 4 at addr ffff88810f676948 by task ping/301
[ 84.583686]
[ 84.583797] CPU: 3 PID: 301 Comm: ping Not tainted 6.3.0-rc5 #1
[ 84.584164] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 84.584644] Call Trace:
[ 84.584787] <TASK>
[ 84.584906] dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1))
[ 84.585108] print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
[ 84.585570] kasan_report (mm/kasan/report.c:538)
[ 84.585988] qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[ 84.586599] qfq_enqueue (net/sched/sch_qfq.c:1255)
[ 84.587607] dev_qdisc_enqueue (net/core/dev.c:3776)
[ 84.587749] __dev_queue_xmit (./include/net/sch_generic.h:186 net/core/dev.c:3865 net/core/dev.c:4212)
[ 84.588763] ip_finish_output2 (./include/net/neighbour.h:546 net/ipv4/ip_output.c:228)
[ 84.589460] ip_output (net/ipv4/ip_output.c:430)
[ 84.590132] ip_push_pending_frames (./include/net/dst.h:444 net/ipv4/ip_output.c:126 net/ipv4/ip_output.c:1586 net/ipv4/ip_output.c:1606)
[ 84.590285] raw_sendmsg (net/ipv4/raw.c:649)
[ 84.591960] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[ 84.592084] __sys_sendto (net/socket.c:2142)
[ 84.593306] __x64_sys_sendto (net/socket.c:2150)
[ 84.593779] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 84.593902] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[ 84.594070] RIP: 0033:0x7fe568032066
[ 84.594192] Code: 0e 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c09[ 84.594796] RSP: 002b:00007ffce388b4e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
Code starting with the faulting instruction
===========================================
[ 84.595047] RAX: ffffffffffffffda RBX: 00007ffce388cc70 RCX: 00007fe568032066
[ 84.595281] RDX: 0000000000000040 RSI: 00005605fdad6d10 RDI: 0000000000000003
[ 84.595515] RBP: 00005605fdad6d10 R08: 00007ffce388eeec R09: 0000000000000010
[ 84.595749] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
[ 84.595984] R13: 00007ffce388cc30 R14: 00007ffce388b4f0 R15: 0000001d00000001
[ 84.596218] </TASK>
[ 84.596295]
[ 84.596351] Allocated by task 291:
[ 84.596467] kasan_save_stack (mm/kasan/common.c:46)
[ 84.596597] kasan_set_track (mm/kasan/common.c:52)
[ 84.596725] __kasan_kmalloc (mm/kasan/common.c:384)
[ 84.596852] __kmalloc_node (./include/linux/kasan.h:196 mm/slab_common.c:967 mm/slab_common.c:974)
[ 84.596979] qdisc_alloc (./include/linux/slab.h:610 ./include/linux/slab.h:731 net/sched/sch_generic.c:938)
[ 84.597100] qdisc_create (net/sched/sch_api.c:1244)
[ 84.597222] tc_modify_qdisc (net/sched/sch_api.c:1680)
[ 84.597357] rtnetlink_rcv_msg (net/core/rtnetlink.c:6174)
[ 84.597495] netlink_rcv_skb (net/netlink/af_netlink.c:2574)
[ 84.597627] netlink_unicast (net/netlink/af_netlink.c:1340 net/netlink/af_netlink.c:1365)
[ 84.597759] netlink_sendmsg (net/netlink/af_netlink.c:1942)
[ 84.597891] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[ 84.598016] ____sys_sendmsg (net/socket.c:2501)
[ 84.598147] ___sys_sendmsg (net/socket.c:2557)
[ 84.598275] __sys_sendmsg (./include/linux/file.h:31 net/socket.c:2586)
[ 84.598399] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 84.598520] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[ 84.598688]
[ 84.598744] The buggy address belongs to the object at ffff88810f674000
[ 84.598744] which belongs to the cache kmalloc-8k of size 8192
[ 84.599135] The buggy address is located 2664 bytes to the right of
[ 84.599135] allocated 7904-byte region [ffff88810f674000, ffff88810f675ee0)
[ 84.599544]
[ 84.599598] The buggy address belongs to the physical page:
[ 84.599777] page:00000000e638567f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10f670
[ 84.600074] head:00000000e638567f order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 84.600330] flags: 0x200000000010200(slab|head|node=0|zone=2)
[ 84.600517] raw: 0200000000010200 ffff888100043180 dead000000000122 0000000000000000
[ 84.600764] raw: 0000000000000000 0000000080020002 00000001ffffffff 0000000000000000
[ 84.601009] page dumped because: kasan: bad access detected
[ 84.601187]
[ 84.601241] Memory state around the buggy address:
[ 84.601396] ffff88810f676800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.601620] ffff88810f676880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.601845] >ffff88810f676900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602069] ^
[ 84.602243] ffff88810f676980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602468] ffff88810f676a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602693] ==================================================================
[ 84.602924] Disabling lock debugging due to kernel taint
Fixes: 3015f3d2a3 ("pkt_sched: enable QFQ to support TSO/GSO")
Reported-by: Gwangun Jung <exsociety@gmail.com>
Signed-off-by: Gwangun Jung <exsociety@gmail.com>
Acked-by: Jamal Hadi Salim<jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The radix tree's only use was to map PWM channels to the global number
space. With that number space gone, the radix tree is now unused, so it
can simply be removed.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The cache information can be extracted from either a Device
Tree (DT), the PPTT ACPI table, or arch registers (clidr_el1
for arm64).
The clidr_el1 register is used only if DT/ACPI information is not
available. It does not states how caches are shared among CPUs.
Add a use_arch_cache_info field/function to identify when the
DT/ACPI doesn't provide cache information. Use this information
to assume L1 caches are privates and L2 and higher are shared among
all CPUs.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20230414081453.244787-5-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
If a Device Tree (DT) is used, the presence of cache properties is
assumed. Not finding any is not considered. For arm64 platforms,
cache information can be fetched from the clidr_el1 register.
Checking whether cache information is available in the DT
allows to switch to using clidr_el1.
init_of_cache_level()
\-of_count_cache_leaves()
will assume there a 2 cache leaves (L1 data/instruction caches), which
can be different from clidr_el1 information.
cache_setup_of_node() tries to read cache properties in the DT.
If there are none, this is considered a success. Knowing no
information was available would allow to switch to using clidr_el1.
Fixes: de0df442ee ("cacheinfo: Check 'cache-unified' property to count cache leaves")
Reported-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/all/20230404-hatred-swimmer-6fecdf33b57a@spud/
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230414081453.244787-3-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
If there is no ACPI/DT information, it is assumed that L1 caches
are private and L2 (and higher) caches are shared. A cache is
'shared' between two CPUs if it is accessible from these two
CPUs.
Each CPU owns a representation (i.e. has a dedicated cacheinfo struct)
of the caches it has access to. cache_leaves_are_shared() tries to
identify whether two representations are designating the same actual
cache.
In cache_leaves_are_shared(), if 'this_leaf' is a L2 cache (or higher)
and 'sib_leaf' is a L1 cache, the caches are detected as shared as
only this_leaf's cache level is checked.
This is leads to setting sib_leaf as being shared with another CPU,
which is incorrect as this is a L1 cache.
Check 'sib_leaf->level'. Also update the comment as the function is
called when populating 'shared_cpu_map'.
Fixes: f16d1becf9 ("cacheinfo: Use cache identifiers to check if the caches are shared if available")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230414081453.244787-2-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Convert the driver to immutable irq-chip with a bit of
intuition.
I switched to consistently using irqd_to_hwirq() consistently
while we are at it.
As the driver now needs to get the gpio_chip in the .irq_mask
and .irq_unmask callbacks, I switched to a pattern where we
first fetch the gpio_chip and then the state container from
that in two steps. The compiler will do the same thing anyway.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230403-immutable-irqchips-v1-9-503788a7f6e6@linaro.org
Convert the driver to immutable irq-chip with a bit of
intuition.
I switched to using irqd_to_hwirq() consistently while we
are at it.
This driver does not use the GPIOCHIP_IRQ_RESOURCE_HELPERS
as it defines its own resource reservations, simply in
order to turn IRQ lines into inputs on initialization.
Also switched the open coded calls to gpiochip_lock_as_irq()
to gpiochip_reqres_irq() so we also get the right module
reference counting.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230403-immutable-irqchips-v1-7-503788a7f6e6@linaro.org
Haiyang Zhang says:
====================
net: mana: Add support for jumbo frame
The set adds support for jumbo frame,
with some optimization for the RX path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
During probe, get the hardware-allowed max MTU by querying the device
configuration. Users can select MTU up to the device limit.
When XDP is in use, limit MTU settings so the buffer size is within
one page. And, when MTU is set to a too large value, XDP is not allowed
to run.
Also, to prevent changing MTU fails, and leaves the NIC in a bad state,
pre-allocate all buffers before starting the change. So in low memory
condition, it will return error, without affecting the NIC.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update RX data path to allocate and use RX queue DMA buffers with
proper size based on potentially various MTU sizes.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move out common buffer allocation code from mana_process_rx_cqe() and
mana_alloc_rx_wqe() to helper functions.
Refactor related variables so they can be changed in one place, and buffer
sizes are in sync.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use napi_build_skb() instead of build_skb() to take advantage of the
NAPI percpu caches to obtain skbuff_head.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In raid10_run(), if setup_conf() succeed and raid10_run() failed before
setting 'mddev->thread', then in the error path 'conf->thread' is not
freed.
Fix the problem by setting 'mddev->thread' right after setup_conf().
Fixes: 43a521238a ("md-cluster: choose correct label when clustered layout is not supported")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-7-yukuai1@huaweicloud.com
raid10_sync_request() will add 'r10bio->remaining' for both rdev and
replacement rdev. However, if the read io fails, recovery_request_write()
returns without issuing the write io, in this case, end_sync_request()
is only called once and 'remaining' is leaked, cause an io hang.
Fix the problem by decreasing 'remaining' according to if 'bio' and
'repl_bio' is valid.
Fixes: 24afd80d99 ("md/raid10: handle recovery of replacement devices.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-5-yukuai1@huaweicloud.com
__kvm_vcpu_run_vhe() end on VHE with an isb(). However, this
function is only reachable via kvm_call_hyp_ret(), which already
contains an isb() in order to mimick the behaviour of nVHE and
provide a context synchronisation event.
We thus have two isb()s back to back, which is one too many.
Drop the first one and solely rely on the one in the helper.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Contrary to nVHE, VHE is a lot easier when it comes to dealing
with speculative page table walks started at EL1. As we only change
EL1&0 translation regime when context-switching, we already benefit
from the effect of the DSB that sits in the context switch code.
We only need to take care of it in the NV case, where we can
flip between between two EL1 contexts (one of them being the virtual
EL2) without a context switch.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
We rely on the presence of a DSB at the end of kvm_flush_dcache_to_poc()
that, on top of ensuring completion of the cache clean, also covers
the speculative page table walk started from EL1.
Document this dependency.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
A TLBI from EL2 impacting EL1 involves messing with the EL1&0
translation regime, and the page table walker may still be
performing speculative walks.
Piggyback on the existing DSBs to always have a DSB ISH that
will synchronise all load/store operations that the PTW may
still have.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Prior to this patch, the sensing configuration data was not parsed
correctly, breaking detection of max_tch. The vendor driver includes
this field. This change informs the driver about the correct maximum
number of simultaneous touch inputs.
Tested on a Pine64 PineNote with a modified touch screen controller
firmware.
Signed-off-by: hrdl <git@hrdl.eu>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20230411211651.3791304-1-git@hrdl.eu
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Saeed Mahameed says:
====================
mlx5-updates-2023-04-11
1) Vlad adds the support for linux bridge multicast offload support
Patches #1 through #9
Synopsis
Vlad Says:
==============
Implement support of bridge multicast offload in mlx5. Handle port object
attribute SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED notification to toggle multicast
offload and bridge snooping support on bridge. Handle port object
SWITCHDEV_OBJ_ID_PORT_MDB notification to attach a bridge port to MDB.
Steering architecture
Existing offload infrastructure relies on two levels of flow tables - bridge
ingress and egress. For multicast offload the architecture is extended with
additional layer of per-port multicast replication tables. Such tables filter
loopback traffic (so packets are not replicated to their source port) and pop
VLAN headers for "untagged" VLANs. The tables are referenced by the MDB rules in
egress table. MDB egress rule can point to multiple per-port multicast tables,
which causes matching multicast traffic to be replicated to all of them, and,
consecutively, to several bridge ports:
+--------+--+
+---------------------------------------> Port 1 | |
| +-^------+--+
| |
| |
+-----------------------------------------+ | +---------------------------+ |
| EGRESS table | | +--> PORT 1 multicast table | |
+----------------------------------+ +-----------------------------------------+ | | +---------------------------+ |
| INGRESS table | | | | | | | |
+----------------------------------+ | dst_mac=P1,vlan=X -> pop vlan, goto P1 +--+ | | FG0: | |
| | | dst_mac=P1,vlan=Y -> pop vlan, goto P1 | | | src_port=dst_port -> drop | |
| src_mac=M1,vlan=X -> goto egress +---> dst_mac=P2,vlan=X -> pop vlan, goto P2 +--+ | | FG1: | |
| ... | | dst_mac=P2,vlan=Y -> goto P2 | | | | VLAN X -> pop, goto port | |
| | | dst_mac=MDB1,vlan=Y -> goto mcast P1,P2 +-----+ | ... | |
+----------------------------------+ | | | | | VLAN Y -> pop, goto port +-------+
+-----------------------------------------+ | | | FG3: |
| | | matchall -> goto port |
| | | |
| | +---------------------------+
| |
| |
| | +--------+--+
+---------------------------------------> Port 2 | |
| +-^------+--+
| |
| |
| +---------------------------+ |
+--> PORT 2 multicast table | |
+---------------------------+ |
| | |
| FG0: | |
| src_port=dst_port -> drop | |
| FG1: | |
| VLAN X -> pop, goto port | |
| ... | |
| | |
| FG3: | |
| matchall -> goto port +-------+
| |
+---------------------------+
Patches overview:
- Patch 1 adds hardware definition bits for capabilities required to replicate
multicast packets to multiple per-port tables. These bits are used by
following patches to only attempt multicast offload if firmware and hardware
provide necessary support.
- Pathces 2-4 patches are preparations and refactoring.
- Patch 5 implements necessary infrastructure to toggle multicast offload
via SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED port object attribute notification.
This also enabled IGMP and MLD snooping.
- Patch 6 implements per-port multicast replication tables. It only supports
filtering of loopback packets.
- Patch 7 extends per-port multicast tables with VLAN pop support for 'untagged'
VLANs.
- Patch 8 handles SWITCHDEV_OBJ_ID_PORT_MDB port object notifications. It
creates MDB replication rules in egress table that can replicate packets to
multiple per-port multicast tables.
- Patch 9 adds tracepoints for MDB events.
==============
2) Parav Create a new allocation profile for SFs, to save on memory
3) Yevgeny provides some initial patches for upcoming software steering
support new pattern/arguments type of modify_header actions.
Starting with ConnectX-6 DX, we use a new design of modify_header FW object.
The current modify_header object allows for having only limited number of
these FW objects, which means that we are limited in the number of offloaded
flows that require modify_header action.
As a preparation Yevgeny provides the following 4 patches:
- Patch 1: Add required mlx5_ifc HW bits
- Patch 2, 3: Add new WQE type and opcode that is required for pattern/arg
support and adds appropriate support in dr_send.c
- Patch 4: Add ICM pool for modify-header-pattern objects and implement
patterns cache, allowing patterns reuse for different flows
* tag 'mlx5-updates-2023-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: DR, Add modify-header-pattern ICM pool
net/mlx5: DR, Prepare sending new WQE type
net/mlx5: Add new WQE for updating flow table
net/mlx5: Add mlx5_ifc bits for modify header argument
net/mlx5: DR, Set counter ID on the last STE for STEv1 TX
net/mlx5: Create a new profile for SFs
net/mlx5: Bridge, add tracepoints for multicast
net/mlx5: Bridge, implement mdb offload
net/mlx5: Bridge, support multicast VLAN pop
net/mlx5: Bridge, add per-port multicast replication tables
net/mlx5: Bridge, snoop igmp/mld packets
net/mlx5: Bridge, extract code to lookup parent bridge of port
net/mlx5: Bridge, move additional data structures to priv header
net/mlx5: Bridge, increase bridge tables sizes
net/mlx5: Add mlx5_ifc definitions for bridge multicast support
====================
Link: https://lore.kernel.org/r/20230412040752.14220-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PFs which support the MAC Merge layer also have a set of 8 registers
called "Port traffic class N frame preemption register (PTC0FPR - PTC7FPR)".
Through these, a traffic class (group of TX rings of same dequeue
priority) can be mapped to the eMAC or to the pMAC.
There's nothing particularly spectacular here. We should probably only
commit the preemptible TCs to hardware once the MAC Merge layer became
active, but unlike Felix, we don't have an IRQ that notifies us of that.
We'd have to sleep for up to verifyTime (127 ms) to wait for a
resolution coming from the verification state machine; not only from the
ndo_setup_tc() code path, but also from enetc_mm_link_state_update().
Since it's relatively complicated and has a relatively small benefit,
I'm not doing it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To gain access to the larger encapsulating structure which has the type
tc_mqprio_qopt_offload, rename just the "qopt" field as "qopt".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a duplication of the FP adminStatus logic introduced for
tc-mqprio. Offloading is done through the tc_mqprio_qopt_offload
structure embedded within tc_taprio_qopt_offload. So practically, if a
device driver is written to treat the mqprio portion of taprio just like
standalone mqprio, it gets unified handling of frame preemption.
I would have reused more code with taprio, but this is mostly netlink
attribute parsing, which is hard to transform into generic code without
having something that stinks as a result. We have the same variables
with the same semantics, just different nlattr type values
(TCA_MQPRIO_TC_ENTRY=5 vs TCA_TAPRIO_ATTR_TC_ENTRY=12;
TCA_MQPRIO_TC_ENTRY_FP=2 vs TCA_TAPRIO_TC_ENTRY_FP=3, etc) and
consequently, different policies for the nest.
Every time nla_parse_nested() is called, an on-stack table "tb" of
nlattr pointers is allocated statically, up to the maximum understood
nlattr type. That array size is hardcoded as a constant, but when
transforming this into a common parsing function, it would become either
a VLA (which the Linux kernel rightfully doesn't like) or a call to the
allocator.
Having FP adminStatus in tc-taprio can be seen as addressing the 802.1Q
Annex S.3 "Scheduling and preemption used in combination, no HOLD/RELEASE"
and S.4 "Scheduling and preemption used in combination with HOLD/RELEASE"
use cases. HOLD and RELEASE events are emitted towards the underlying
MAC Merge layer when the schedule hits a Set-And-Hold-MAC or a
Set-And-Release-MAC gate operation. So within the tc-taprio UAPI space,
one can distinguish between the 2 use cases by choosing whether to use
the TC_TAPRIO_CMD_SET_AND_HOLD and TC_TAPRIO_CMD_SET_AND_RELEASE gate
operations within the schedule, or just TC_TAPRIO_CMD_SET_GATES.
A small part of the change is dedicated to refactoring the max_sdu
nlattr parsing to put all logic under the "if" that tests for presence
of that nlattr.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IEEE 802.1Q-2018 clause 6.7.2 Frame preemption specifies that each
packet priority can be assigned to a "frame preemption status" value of
either "express" or "preemptible". Express priorities are transmitted by
the local device through the eMAC, and preemptible priorities through
the pMAC (the concepts of eMAC and pMAC come from the 802.3 MAC Merge
layer).
The FP adminStatus is defined per packet priority, but 802.1Q clause
12.30.1.1.1 framePreemptionAdminStatus also says that:
| Priorities that all map to the same traffic class should be
| constrained to use the same value of preemption status.
It is impossible to ignore the cognitive dissonance in the standard
here, because it practically means that the FP adminStatus only takes
distinct values per traffic class, even though it is defined per
priority.
I can see no valid use case which is prevented by having the kernel take
the FP adminStatus as input per traffic class (what we do here).
In addition, this also enforces the above constraint by construction.
User space network managers which wish to expose FP adminStatus per
priority are free to do so; they must only observe the prio_tc_map of
the netdev (which presumably is also under their control, when
constructing the mqprio netlink attributes).
The reason for configuring frame preemption as a property of the Qdisc
layer is that the information about "preemptible TCs" is closest to the
place which handles the num_tc and prio_tc_map of the netdev. If the
UAPI would have been any other layer, it would be unclear what to do
with the FP information when num_tc collapses to 0. A key assumption is
that only mqprio/taprio change the num_tc and prio_tc_map of the netdev.
Not sure if that's a great assumption to make.
Having FP in tc-mqprio can be seen as an implementation of the use case
defined in 802.1Q Annex S.2 "Preemption used in isolation". There will
be a separate implementation of FP in tc-taprio, for the other use
cases.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
