Add the minItems for interrupts property as well. In the absence of
this, we get warning if interrupts are less than 13
arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb:
dma-controller@800000: interrupts: [[0, 588, 4], [0, 589, 4], [0, 590,
4], [0, 591, 4], [0, 592, 4], [0, 593, 4], [0, 594, 4], [0, 595, 4], [0,
596, 4], [0, 597, 4]] is too short
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220414064235.1182195-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a Bug section, indicating preferred mailing method for bug reports,
to NFC Subsystem entry.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The init_systime() may be invoked in atomic state. We have observed the
following call trace when running "phc_ctl /dev/ptp0 set" on a Intel
Agilex board.
BUG: sleeping function called from invalid context at drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c:74
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 381, name: phc_ctl
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
Preemption disabled at:
[<ffff80000892ef78>] stmmac_set_time+0x34/0x8c
CPU: 2 PID: 381 Comm: phc_ctl Not tainted 5.18.0-rc2-next-20220414-yocto-standard+ #567
Hardware name: SoCFPGA Agilex SoCDK (DT)
Call trace:
dump_backtrace.part.0+0xc4/0xd0
show_stack+0x24/0x40
dump_stack_lvl+0x7c/0xa0
dump_stack+0x18/0x34
__might_resched+0x154/0x1c0
__might_sleep+0x58/0x90
init_systime+0x78/0x120
stmmac_set_time+0x64/0x8c
ptp_clock_settime+0x60/0x9c
pc_clock_settime+0x6c/0xc0
__arm64_sys_clock_settime+0x88/0xf0
invoke_syscall+0x5c/0x130
el0_svc_common.constprop.0+0x4c/0x100
do_el0_svc+0x7c/0xa0
el0_svc+0x58/0xcc
el0t_64_sync_handler+0xa4/0x130
el0t_64_sync+0x18c/0x190
So we should use readl_poll_timeout_atomic() here instead of
readl_poll_timeout().
Also adjust the delay time to 10us to fix a "__bad_udelay" build error
reported by "kernel test robot <lkp@intel.com>". I have tested this on
Intel Agilex and NXP S32G boards, there is no delay needed at all.
So the 10us delay should be long enough for most cases.
Fixes: ff8ed73786 ("net: stmmac: use readl_poll_timeout() function in init_systime()")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If clk_prepare_enable() fails we call clk_disable_unprepare()
in the error path what results in a warning that the clock
is disabled and unprepared already.
And if we fail later in phy_g12a_usb3_pcie_probe() then we
bail out w/o calling clk_disable_unprepare().
This patch fixes both errors.
Fixes: 36077e16c0 ("phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/8e416f95-1084-ee28-860e-7884f7fa2e32@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, the config isa register allows us to disable all allowed
single letter ISA extensions. It shouldn't be the case as vmm shouldn't
be able to disable base extensions (imac).
These extensions should always be enabled as long as they are enabled
in the host ISA.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Fixes: 92ad82002c ("RISC-V: KVM: Implement
KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls")
If CONFIG_DRM_VC4=y, CONFIG_RASPBERRYPI_FIRMWARE=m, CONFIG_COMPILE_TEST=n,
bulding fails:
drivers/gpu/drm/vc4/vc4_drv.o: In function `vc4_drm_bind':
vc4_drv.c:(.text+0x320): undefined reference to `rpi_firmware_get'
vc4_drv.c:(.text+0x320): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `rpi_firmware_get'
vc4_drv.c:(.text+0x34c): undefined reference to `rpi_firmware_property'
vc4_drv.c:(.text+0x34c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `rpi_firmware_property'
vc4_drv.c:(.text+0x354): undefined reference to `rpi_firmware_put'
vc4_drv.c:(.text+0x354): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `rpi_firmware_put'
Make DRM_VC4 depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) to fix this.
Fixes: c406ad5e4a ("drm/vc4: Notify the firmware when DRM is in charge")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411024325.3968413-1-zhengbin13@huawei.com
There are no ISA extension defined as 's' & 'u' in RISC-V specifications.
The misa register defines 's' & 'u' bit as Supervisor/User privilege mode
enabled. But it should not appear in the ISA extension in the device tree.
Remove those from the allowed ISA extension for kvm.
Fixes: a33c72faf2 ("RISC-V: KVM: Implement VCPU create, init and
destroy functions")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
A workaround makes fbdev hot-unplugging work for framebuffers without
device. The only user for this feature was offb. As each OF framebuffer
now has an associated platform device, the workaround hould no longer
be triggered. Update it with a warning and rewrite the comment. Fbdev
drivers that trigger the hot-unplug workaround really need to be fixed.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220419100405.12600-3-tzimmermann@suse.de
Create a platform device for each OF-declared framebuffer and have
offb bind to these devices. Allows for real hot-unplugging and other
drivers besides offb.
Originally, offb created framebuffer devices while initializing its
module by parsing the OF device tree. No actual Linux device was set
up. This tied OF framebuffers to offb and makes writing other drivers
for the OF framebuffers complicated. The absence of a Linux device
further prevented real hot-unplugging. Adding a distinct platform
device for each OF framebuffer solves both problems. Specifically, a
DRM driver can now provide graphics output for modern userspace.
Some of the offb init code is now located in the OF initialization.
There's now also an implementation of of_platform_default_populate_init(),
which was missing before. The OF side creates different devices for
either OF display nodes or BootX displays as they require different
handling by the driver. The offb drivers picks up each type of device
and runs the appropriate fbdev initialization.
Tested with OF display nodes on qemu's ppc64le target.
v3:
* declare variable 'node' with function scope (Rob)
v2:
* run PPC code as part of existing initialization (Rob)
* add a few more error warnings (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220419100405.12600-2-tzimmermann@suse.de
Add <asm/smp.h> for cpuid_to_hartid_map etc.
This is needed for both SMP and non-SMP builds, but not having it
causes a build error for non-SMP:
drivers/cpuidle/cpuidle-riscv-sbi.c: In function 'sbi_cpuidle_init_cpu':
drivers/cpuidle/cpuidle-riscv-sbi.c:350:26: error: implicit declaration of function 'cpuid_to_hartid_map' [-Werror=implicit-function-declaration]
Fixes: 6abf32f1d9 ("cpuidle: Add RISC-V SBI CPU idle driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Objtool's function fallthrough detection only works on C objects.
The distinction between C and assembly objects no longer makes sense
with objtool running on vmlinux.o.
Now that copy_user_64.S has been fixed up, and an objtool sibling call
detection bug has been fixed, the asm code is in "compliance" and this
hack is no longer needed. Remove it.
Fixes: ed53a0d971 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/b434cff98eca3a60dcc64c620d7d5d405a0f441c.1649718562.git.jpoimboe@redhat.com
In add_jump_destinations(), sibling call detection requires 'insn->func'
to be valid. But alternative instructions get their 'func' set in
handle_group_alt(), which runs *after* add_jump_destinations(). So
sibling calls in alternatives code don't get properly detected.
Fix that by changing the initialization order: call
add_special_section_alts() *before* add_jump_destinations().
This also means the special case for a missing 'jump_dest' in
add_jump_destinations() can be removed, as it has already been dealt
with.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/c02e0a0a2a4286b5f848d17c77fdcb7e0caf709c.1649718562.git.jpoimboe@redhat.com
When a "!ENDBR" warning is reported for a data section, objtool just
prints the text address of the relocation target twice, without giving
any clues about the location of the original data reference:
vmlinux.o: warning: objtool: dcbnl_netdevice_event()+0x0: .text+0xb64680: data relocation to !ENDBR: dcbnl_netdevice_event+0x0
Instead, print the address of the data reference, in addition to the
address of the relocation target.
vmlinux.o: warning: objtool: dcbnl_nb+0x0: .data..read_mostly+0xe260: data relocation to !ENDBR: dcbnl_netdevice_event+0x0
Fixes: 89bc853eae ("objtool: Find unused ENDBR instructions")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/762e88d51300e8eaf0f933a5b0feae20ac033bea.1650300597.git.jpoimboe@redhat.com
Apparently GCC can fail to inline a 'static inline' single caller
function:
lib/strnlen_user.o: warning: objtool: strnlen_user()+0x33: call to do_strnlen_user() with UACCESS enabled
lib/strncpy_from_user.o: warning: objtool: strncpy_from_user()+0x33: call to do_strncpy_from_user() with UACCESS enabled
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220408094718.262932488@infradead.org
A crash was observed in the ORC unwinder:
BUG: stack guard page was hit at 000000000dd984a2 (stack is 00000000d1caafca..00000000613712f0)
kernel stack overflow (page fault): 0000 [#1] SMP NOPTI
CPU: 93 PID: 23787 Comm: context_switch1 Not tainted 5.4.145 #1
RIP: 0010:unwind_next_frame
Call Trace:
<NMI>
perf_callchain_kernel
get_perf_callchain
perf_callchain
perf_prepare_sample
perf_event_output_forward
__perf_event_overflow
perf_ibs_handle_irq
perf_ibs_nmi_handler
nmi_handle
default_do_nmi
do_nmi
end_repeat_nmi
This was really two bugs:
1) The perf IBS code passed inconsistent regs to the unwinder.
2) The unwinder didn't handle the bad input gracefully.
Fix the latter bug. The ORC unwinder needs to be immune against bad
inputs. The problem is that stack_access_ok() doesn't recheck the
validity of the full range of registers after switching to the next
valid stack with get_stack_info(). Fix that.
[ jpoimboe: rewrote commit log ]
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/1650353656-956624-1-git-send-email-dmtrmonakhov@yandex-team.ru
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
This problem can be reproduced with CONFIG_PERF_USE_VMALLOC enabled on
both x86_64 and aarch64 arch when using sysdig -B(using ebpf)[1].
sysdig -B works fine after rebuilding the kernel with
CONFIG_PERF_USE_VMALLOC disabled.
I tracked it down to the if condition event->rb->nr_pages != nr_pages
in perf_mmap is true when CONFIG_PERF_USE_VMALLOC is enabled where
event->rb->nr_pages = 1 and nr_pages = 2048 resulting perf_mmap to
return -EINVAL. This is because when CONFIG_PERF_USE_VMALLOC is
enabled, rb->nr_pages is always equal to 1.
Arch with CONFIG_PERF_USE_VMALLOC enabled by default:
arc/arm/csky/mips/sh/sparc/xtensa
Arch with CONFIG_PERF_USE_VMALLOC disabled by default:
x86_64/aarch64/...
Fix this problem by using data_page_nr()
[1] https://github.com/draios/sysdig
Fixes: 906010b213 ("perf_event: Provide vmalloc() based mmap() backing")
Signed-off-by: Zhipeng Xie <xiezhipeng1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220209145417.6495-1-xiezhipeng1@huawei.com
The warning in cfs_rq_is_decayed() triggered:
SCHED_WARN_ON(cfs_rq->avg.load_avg ||
cfs_rq->avg.util_avg ||
cfs_rq->avg.runnable_avg)
There exists a corner case in attach_entity_load_avg() which will
cause load_sum to be zero while load_avg will not be.
Consider se_weight is 88761 as per the sched_prio_to_weight[] table.
Further assume the get_pelt_divider() is 47742, this gives:
se->avg.load_avg is 1.
However, calculating load_sum:
se->avg.load_sum = div_u64(se->avg.load_avg * se->avg.load_sum, se_weight(se));
se->avg.load_sum = 1*47742/88761 = 0.
Then enqueue_load_avg() adds this to the cfs_rq totals:
cfs_rq->avg.load_avg += se->avg.load_avg;
cfs_rq->avg.load_sum += se_weight(se) * se->avg.load_sum;
Resulting in load_avg being 1 with load_sum is 0, which will trigger
the WARN.
Fixes: f207934fb7 ("sched/fair: Align PELT windows between cfs_rq and its se")
Signed-off-by: kuyo chang <kuyo.chang@mediatek.com>
[peterz: massage changelog]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20220414090229.342-1-kuyo.chang@mediatek.com
Huge page backed vmalloc memory could benefit performance in many cases.
However, some users of vmalloc may not be ready to handle huge pages for
various reasons: hardware constraints, potential pages split, etc.
VM_NO_HUGE_VMAP was introduced to allow vmalloc users to opt-out huge
pages. However, it is not easy to track down all the users that require
the opt-out, as the allocation are passed different stacks and may cause
issues in different layers.
To address this issue, replace VM_NO_HUGE_VMAP with an opt-in flag,
VM_ALLOW_HUGE_VMAP, so that users that benefit from huge pages could ask
specificially.
Also, remove vmalloc_no_huge() and add opt-in helper vmalloc_huge().
Fixes: fac54e2bfb ("x86/Kconfig: Select HAVE_ARCH_HUGE_VMALLOC with HAVE_ARCH_HUGE_VMAP")
Link: https://lore.kernel.org/netdev/14444103-d51b-0fb3-ee63-c3f182f0b546@molgen.mpg.de/"
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
