PD#SWPL-5837
Problem:
dtv is out of avsync when dolby ms12 certificate
Solution:
when the audio is played, recalculate the apts to sync
pcrsrc when pcrmaster.
Verify:
X301
Change-Id: I199383aa1c0de1b4f0ec646d9d066910b3bb2b42
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
PD#SWPL-6696
Problem:
Pad key '+' cannot work
Solution:
Add to pad key support list
Add more key support for SBR remote
Verify:
S400 S400_SBR A113D
Change-Id: I9bdc3053f2b3ce778e9c2f682fcf31ac054887b4
Signed-off-by: Yeping Miao <yeping.miao@amlogic.com>
PD#SWPL-6899
Problem:
enable vlock phase lock function in pll mode
Solution:
1.when phase lock on, and when phase lock flag not assert
disable ss.
2.after phase lock flag assert, restore ss
Verify:
tl1
Change-Id: I2f9f6ec76468b1043c1b7ec99b2daa4f9d69ae60
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Conflicts:
drivers/amlogic/media/enhancement/amvecm/vlock.c
PD#SWPL-6193
Problem:
ramdump need write compressed data to persist storage device.
But if we write it under uboot, it may cause journal and block
bitmap mismatch due to different version of file system. This
caused kernel panic after ramdump finished.
Solution:
Write compressed data under kernel.
This change also removed some extern function of ramdump since
we use sticky register to store ramdump information.
Verify:
p212
Change-Id: Idd83ec6ead4783918b90a39cf716fd3117402278
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/mesonaxg.dtsi
arch/arm/boot/dts/amlogic/mesong12a.dtsi
arch/arm/boot/dts/amlogic/mesongxl.dtsi
arch/arm/boot/dts/amlogic/mesongxm.dtsi
arch/arm/boot/dts/amlogic/mesontl1.dtsi
arch/arm/boot/dts/amlogic/mesontxl.dtsi
arch/arm/boot/dts/amlogic/mesontxlx.dtsi
arch/arm64/boot/dts/amlogic/mesonaxg.dtsi
arch/arm64/boot/dts/amlogic/mesong12a.dtsi
arch/arm64/boot/dts/amlogic/mesongxl.dtsi
arch/arm64/boot/dts/amlogic/mesongxm.dtsi
arch/arm64/boot/dts/amlogic/mesontxl.dtsi
arch/arm64/boot/dts/amlogic/mesontxlx.dtsi
drivers/amlogic/memory_ext/ram_dump.c
include/linux/amlogic/ramdump.h
PD#SWPL-6608
Problem:
system will report tx error somethime after resume
Solution:
reset ethernet when resume
Verify:
verify on u200 board
Change-Id: I9863a8a50c08addd4e2d8c024f46a2e7568c28b4
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
Conflicts:
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
PD#SWPL-5595
Problem:
set_cpus_allowed_ptr(current, cpu_all_mask) is always errorly
called to retore CPU affinity for current task. In some cases,
the current may be a bounded kworker thread, and we should not
set its CPU affinity to all CPUs
Solution:
Save the original CPU affinity and restore it
Verify:
W400 revB
Change-Id: I3cd65e79791563af9dacc09639b8645b97979c44
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Conflicts:
drivers/amlogic/efuse/efuse_hw64.c
PD#SWPL-4858
Problem:
Soc not support sduart
Solution:
add not supported flag in dts
Verify:
verify by tl1 skt
Change-Id: Ifd1f975bd13b150aac9d99f60423ab4f0b903c98
Signed-off-by: Nan Li <nan.li@amlogic.com>
Conflicts:
drivers/amlogic/mmc/amlsd.c
PD#SWPL-5896
Problem:
The memory consumption of modules ion and vdin0 is too large
Solution:
Ion CMA memory optimization to 32M,vdin0 to 160M
Verify:
X301、T309
Change-Id: If9e54390baeda6d330bb2c96b14ef3975333a2f1
Signed-off-by: qingwei.xu <qingwei.xu@amlogic.com>
PD#SWPL-1856
Problem:
refactored irblaster code
Solution:
1. Refactor the code according to the core, provider, and consumer
frameworks.
2. Provide software encode to let irblaster work according to different
protocols
3. Provide a unified consumer interface to allow other consumer drivers
to use irblaster.
Verify:
test pass on g12a_u200_v1
Change-Id: Ifd841ef0ed741b7fd721defc25691744ea2103f0
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/mesontxl.dtsi
arch/arm64/boot/dts/amlogic/axg_s410.dts
arch/arm64/boot/dts/amlogic/mesontxl.dtsi
PD#SWPL-5302
Problem:
For dongle products, it is connected to TV directly, and some
parameters are different from mbox.
Solution:
Add dongle mode for driver's usage
Verify:
U211/S905Y2
Change-Id: Ibe45b167800d3b830d78ca8e9d7b67efd64d8564
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Conflicts:
drivers/amlogic/media/vout/hdmitx/hdmi_tx_20/hw/hdmi_tx_hw.c
drivers/amlogic/media/vout/hdmitx/hdmi_tx_20/hw/hw_g12a.c
PD#SWPL-3702
Problem:
local dimming need analog pwm function
Solution:
add analog pwm support
Verify:
x301
Change-Id: I502bb7505947c1f3670f44d0d307f9546f1d57fd
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Conflicts:
drivers/amlogic/media/vout/backlight/aml_ldim/ldim_dev_drv.c
include/linux/amlogic/media/vout/lcd/aml_ldim.h
PD#SWPL-4035
Problem:
Setting different cpufreq tables according to efuse information.
Solution:
Setting different cpufreq tables according to efuse information.
Verify:
g12a_u200, verify pass
Change-Id: I1bf571f332244f5727ef3cd8743f215f71248146
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Conflicts:
drivers/amlogic/cpufreq/meson-cpufreq.c
PD#SWPL-3744
Problem:
For the previous Amlogic CPU series(before TXLX), the CPU booting vector
locates at physical address starting from 0x00. To avoid influencing cpu
booting procedure, we have to reserve the first 1MB physical memory. But
it has changed since TXLX, the normal text section can safely use 0~1M
physical address. So it's no need to reserve the first 1MB in DTS.
Solution:
Change the starting address of usable memory from 0x100000 to 0x0 for CPU
series coming after TXLX.
Verify:
Locally on W400
Change-Id: I2df7859a38feca48abd58459e8b231ee15ada9e2
Signed-off-by: changqing.gao <changqing.gao@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/txlx_t962x_r311_1g.dts
PD#SWPL-4858
Problem:
tl1 not support sduart
Solution:
add not supported flag in match_data
Verify:
verify by tl1 skt
Change-Id: I651765433bb62892fad770c85a5eccd4805e7c79
Signed-off-by: Nan Li <nan.li@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/tl1_pxp.dts
arch/arm/boot/dts/amlogic/tl1_t962x2_skt.dts
drivers/amlogic/mmc/amlsd.c
PD#SWPL-4501
Problem:
Standard pinmux APIs were not used
Solution:
Setting pinmux instead of require for gpio
Verify:
tl1,g12a,g12b,axg,txl,txlx,gxl
Change-Id: I0ad88f414832686d795d252f70e81a34f6cb0f9e
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/mesontxl.dtsi
arch/arm64/boot/dts/amlogic/mesontxl.dtsi
PD#TV-4638
Problem:
Speaker output high frequency howling
after change from pattern 615 to pattern 1 on chroma22294.
The hw resampler keeps sending noise if it has no input.
Solution:
Enable the hw resample pause thd by default.
Verify:
TL1 X301.
Change-Id: Ib6f0924025e155eaa8ba0e3681b307f7ff56b449
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#TV-4638
Problem:
Speaker output high frequency howling
after change from pattern 615 to pattern 1 on chroma22294.
The hw resampler keeps sending noise if it has no input.
Solution:
Enable the hw resample pause thd by default.
Verify:
TL1 X301.
Change-Id: I076d1b80c6482661fdc3fd5808f1cc231666d07e
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-7039
Problem:
Kernel Panic when resample A is disabled
Solution:
When resample is disabled，don't init resample
Verify:
Verified on T962e2_ab311
Change-Id: Id9552ffc6be40f133b828dbded4ad3f15d177ab0
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#TV-3452
Problem:
Toddr stuck after a long time playback.
Solution:
For debug usage.
Verify:
No need.
Change-Id: Ibf4446148f5e028040d7d6527c7695f23f964f7c
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#SWPL-6118
Problem:
No resample will cause mismatch between
input and output if they are not at same
samplerate.
Solution:
Add resample for hdmirx case
Verify:
Local tested.
Change-Id: I298e401578bf49484d6b75fd736d2a74c38508e4
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/ddr_mngr.c
sound/soc/amlogic/auge/ddr_mngr.h
PD#SWPL-5518
Problem:
In DTV passthrough, the output clk drifts from input
Solution:
add clk fine tuning interface
Verify:
verify by X301
Change-Id: I969d3eb865fb1aba90f155965548454cc3040c99
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm.c
PD#TV-3389
Problem:
add vad wake engine in kernel
Solution:
transfer audio data to wake engine
Verify:
x301
Change-Id: I7f44d0141141775bb40f01dbc344a295a72c9d87
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
MAINTAINERS
PD#SWPL-5904
Problem:
Audio DRC in SOC is out of work
Solution:
Add DRC tune interface
Verify:
Verify on X301
Change-Id: I5e8ecc6dafd7fc3805b0c3e60a6ec4c945729119
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#SWPL-6147
Problem:
I2S has 8 channels but spdif only 2.
Need map every single i2s lane to spdif sharebuffer.
Solution:
Add the DTS setting MASKS as former does.
Verify:
Local tested.
Change-Id: If212fc1b9c937a42778682948773874951b8a55a
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm.c
PD#SWPL-5961
Problem:
There is no mute control for tas5782
Solution:
Add mute function for tas 5782
Verify:
A113
Change-Id: I75f8b82a359778f28494636fe76c7bc4db848643
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
PD#TV-2362
Problem:
A DC voltage is always there about 300ms.
And coupled with LRCLK and SCLK which
may cause a toggle an DAC side.
Solution:
Pull down the data pin to clear
the DC level.
Verify:
Local verified.
Change-Id: Ib7aff22c44dcec2f653b7ed29495e5e52c16e038
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-2952
Problem:
High voltage will cause the tdmout
data pin wrong I2S data which cause pop.
Solution:
Disable the bias of gpio.
Verify:
I2S data will be low when I2s closed.
Change-Id: If5d68e0f30df074f528dfec21cbe297795bc4ea7
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/tm2_t962e2_ab311.dts
arch/arm64/boot/dts/amlogic/tm2_t962x3_ab301.dts
sound/soc/amlogic/auge/tdm.c
PD#SWPL-5845
Problem:
audio playback too slow
Solution:
change audio volume slew time
Verify:
Locally test on X301
Change-Id: I48c920037cac852aaa01818bb02eaa8991c1df6b
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#SWPL-4734
Problem:
There is no volume control for tas5782
Solution:
Add ch1/ch2 volume control for tas5782
Verify:
A113
Change-Id: I1e866a2bc024713278aea0c19cc8c91084a24b90
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
Conflicts:
sound/soc/codecs/amlogic/tas5782m.c
PD#TV-1808,TV-1809,TV-1810,TV-1811
Problem:
HW EQ on TL1 doesn't work
Solution:
Add kcontrol of EQ setting and getting
Verify:
test on X301
Change-Id: Iea1525b4a57241a99389c746c0238d96424df316
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Conflicts:
MAINTAINERS
