commit f1a69a940de58b16e8249dff26f74c8cc59b32be upstream.
sctp_sendmsg() re-uses associations and transports when possible by
doing a lookup based on the socket endpoint and the message destination
address, and then sctp_sendmsg_to_asoc() sets the selected transport in
all the message chunks to be sent.
There's a possible race condition if another thread triggers the removal
of that selected transport, for instance, by explicitly unbinding an
address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have
been set up and before the message is sent. This can happen if the send
buffer is full, during the period when the sender thread temporarily
releases the socket lock in sctp_wait_for_sndbuf().
This causes the access to the transport data in
sctp_outq_select_transport(), when the association outqueue is flushed,
to result in a use-after-free read.
This change avoids this scenario by having sctp_transport_free() signal
the freeing of the transport, tagging it as "dead". In order to do this,
the patch restores the "dead" bit in struct sctp_transport, which was
removed in
commit 47faa1e4c5 ("sctp: remove the dead field of sctp_transport").
Then, in the scenario where the sender thread has released the socket
lock in sctp_wait_for_sndbuf(), the bit is checked again after
re-acquiring the socket lock to detect the deletion. This is done while
holding a reference to the transport to prevent it from being freed in
the process.
If the transport was deleted while the socket lock was relinquished,
sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the
send.
The bug was found by a private syzbot instance (see the error report [1]
and the C reproducer that triggers it [2]).
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport.txt [1]
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport__repro.c [2]
Cc: stable@vger.kernel.org
Fixes: df132eff46 ("sctp: clear the transport of some out_chunk_list chunks in sctp_assoc_rm_peer")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250404-kasan_slab-use-after-free_read_in_sctp_outq_select_transport__20250404-v1-1-5ce4a0b78ef2@igalia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 691ee97e1a9de0cdb3efb893c1f180e3f4a35e32 upstream.
Patch series "Fix lazy mmu mode", v2.
I'm planning to implement lazy mmu mode for arm64 to optimize vmalloc. As
part of that, I will extend lazy mmu mode to cover kernel mappings in
vmalloc table walkers. While lazy mmu mode is already used for kernel
mappings in a few places, this will extend it's use significantly.
Having reviewed the existing lazy mmu implementations in powerpc, sparc
and x86, it looks like there are a bunch of bugs, some of which may be
more likely to trigger once I extend the use of lazy mmu. So this series
attempts to clarify the requirements and fix all the bugs in advance of
that series. See patch #1 commit log for all the details.
This patch (of 5):
The docs, implementations and use of arch_[enter|leave]_lazy_mmu_mode() is
a bit of a mess (to put it politely). There are a number of issues
related to nesting of lazy mmu regions and confusion over whether the
task, when in a lazy mmu region, is preemptible or not. Fix all the
issues relating to the core-mm. Follow up commits will fix the
arch-specific implementations. 3 arches implement lazy mmu; powerpc,
sparc and x86.
When arch_[enter|leave]_lazy_mmu_mode() was first introduced by commit
6606c3e0da ("[PATCH] paravirt: lazy mmu mode hooks.patch"), it was
expected that lazy mmu regions would never nest and that the appropriate
page table lock(s) would be held while in the region, thus ensuring the
region is non-preemptible. Additionally lazy mmu regions were only used
during manipulation of user mappings.
Commit 38e0edb15b ("mm/apply_to_range: call pte function with lazy
updates") started invoking the lazy mmu mode in apply_to_pte_range(),
which is used for both user and kernel mappings. For kernel mappings the
region is no longer protected by any lock so there is no longer any
guarantee about non-preemptibility. Additionally, for RT configs, the
holding the PTL only implies no CPU migration, it doesn't prevent
preemption.
Commit bcc6cc8325 ("mm: add default definition of set_ptes()") added
arch_[enter|leave]_lazy_mmu_mode() to the default implementation of
set_ptes(), used by x86. So after this commit, lazy mmu regions can be
nested. Additionally commit 1a10a44dfc ("sparc64: implement the new
page table range API") and commit 9fee28baa6 ("powerpc: implement the
new page table range API") did the same for the sparc and powerpc
set_ptes() overrides.
powerpc couldn't deal with preemption so avoids it in commit b9ef323ea1
("powerpc/64s: Disable preemption in hash lazy mmu mode"), which
explicitly disables preemption for the whole region in its implementation.
x86 can support preemption (or at least it could until it tried to add
support nesting; more on this below). Sparc looks to be totally broken in
the face of preemption, as far as I can tell.
powerpc can't deal with nesting, so avoids it in commit 47b8def935
("powerpc/mm: Avoid calling arch_enter/leave_lazy_mmu() in set_ptes"),
which removes the lazy mmu calls from its implementation of set_ptes().
x86 attempted to support nesting in commit 49147beb0c ("x86/xen: allow
nesting of same lazy mode") but as far as I can tell, this breaks its
support for preemption.
In short, it's all a mess; the semantics for
arch_[enter|leave]_lazy_mmu_mode() are not clearly defined and as a result
the implementations all have different expectations, sticking plasters and
bugs.
arm64 is aiming to start using these hooks, so let's clean everything up
before adding an arm64 implementation. Update the documentation to state
that lazy mmu regions can never be nested, must not be called in interrupt
context and preemption may or may not be enabled for the duration of the
region. And fix the generic implementation of set_ptes() to avoid
nesting.
arch-specific fixes to conform to the new spec will proceed this one.
These issues were spotted by code review and I have no evidence of issues
being reported in the wild.
Link: https://lkml.kernel.org/r/20250303141542.3371656-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20250303141542.3371656-2-ryan.roberts@arm.com
Fixes: bcc6cc8325 ("mm: add default definition of set_ptes()")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juegren Gross <jgross@suse.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit de9e33df7762abbfc2a1568291f2c3a3154c6a9d ]
Some Infineon devices have a issue where the status register will get
stuck with a quick REQUEST_USE / COMMAND_READY sequence. This is not
simply a matter of requiring a longer timeout; the work around is to
retry the command submission. Add appropriate logic to do this in the
send path.
This is fixed in later firmware revisions, but those are not always
available, and cannot generally be easily updated from outside a
firmware environment.
Testing has been performed with a simple repeated loop of doing a
TPM2_CC_GET_CAPABILITY for TPM_CAP_PROP_MANUFACTURER using the Go code
at:
https://the.earth.li/~noodles/tpm-stuff/timeout-reproducer-simple.go
It can take several hours to reproduce, and several million operations.
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abdbf8764f4962af2a910abb3a213ecf304a73d3 ]
Some devices only support SINE periodic effect although they advertise
support for all PERIODIC effect in their HID descriptor. Some just do
nothing when trying to play such an effect (upload goes fine), some express
undefined behavior like turning to one side.
This quirk forces all the periodic effects to be uploaded as SINE. This is
acceptable as all these effects are similar in nature and are mostly used as
rumble. SINE is the most popular with others seldom used (especially SAW_UP
and SAW_DOWN).
Fixes periodic effects for PXN and LITE STAR wheels
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3051bf5ec773b803c474ea556b57d678a8885be3 ]
Most steering wheels simply ignore DIRECTION field, but some try to be
compliant with the PID standard and use it in force calculations. Games
often ignore setting this field properly and/or there can be issues with
dinput8 -> wine -> SDL -> Linux API translation, and this value can be
incorrect. This can lead to partial/complete loss of Force Feedback or
even unexpected force reversal.
Sadly, this quirk can't be detected automatically without sending out
effects that would move an axis.
This fixes FFB on Moza Racing devices and others where effect direction
is not simply ignored.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36de0164bbaff1484288e84ac5df5cff00580263 ]
This lays out a way to provide an initial set of quirks to enable before
device initialization takes place. GPL symbol export needed for the
possibility of building HID drivers which use this function as modules.
Adding a wrapper function to ensure compatibility with the old behavior
of hid_pidff_init.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4119108d2530747e61c7cbf52e2affd089cb1f6 ]
With this quirk, a PID device isn't required to have a strict
logical_minimum of 1 for the the PID_DEVICE_CONTROL usage page.
Some devices come with weird values in their device descriptors and
this quirk enables their initialization even if the logical minimum
of the DEVICE_CONTROL page is not 1.
Fixes initialization of VRS Direct Force Pro
Changes in v6:
- Change quirk name to better reflect it's intention
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc7c154e9bb3c2b98875cfc565406f4787e3b7a4 ]
Some devices with only one axis are missing PARAMETER_BLOCK_OFFSET field
for conditional effects. They can only have one axis, so we're limiting
the max_axis when setting the report for those effects.
Automatic detection ensures compatibility even if such device won't be
explicitly defined in the kernel.
Fixes initialization of VRS DirectForce PRO and possibly other devices.
Changes in v6:
- Fixed NULL pointer dereference. When PBO is missing, make sure not
to set it anyway
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d5c7ce5bf4cc27db41632f357f682d0ee4518e7 ]
A lot of devices do not include this field, and it's seldom used in force
feedback implementations. I tested about three dozen applications and
none of them make use of the delay.
This fixes initialization of a lot of PID wheels like Cammus, VRS, FFBeast
This change has no effect on fully compliant devices
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13c1d5f3a7fa7b55a26e73bb9e95342374a489b2 ]
A number of test suites call functions that expect the returned
drm_display_mode to be destroyed eventually.
However, none of the tests called drm_mode_destroy, which results in a
memory leak.
Since drm_mode_destroy takes two pointers as argument, we can't use a
kunit wrapper. Let's just create a helper every test suite can use.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-1-996305a2e75a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Stable-dep-of: 70f29ca3117a ("drm/tests: cmdline: Fix drm_display_mode memory leak")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51f90720381dea79208513d059e0eb426dee511e ]
We're going to need a full-blown, functional, KMS device to test more
components of the atomic modesetting infrastructure.
Let's add a new helper to create a dumb, mocked, CRTC. By default it
will create a CRTC relying only on the default helpers, but drivers are
free to deviate from that.
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222-kms-hdmi-connector-state-v7-4-8f4af575fce2@kernel.org
Stable-dep-of: 70f29ca3117a ("drm/tests: cmdline: Fix drm_display_mode memory leak")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a48da0febd5113d9de6f51592a09825ebd8415c ]
We're going to need a full-blown, functional, KMS device to test more
components of the atomic modesetting infrastructure.
Let's add a new helper to create a dumb, mocked, primary plane. By
default, it will create a linear XRGB8888 plane, using the default
helpers.
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222-kms-hdmi-connector-state-v7-3-8f4af575fce2@kernel.org
Stable-dep-of: 70f29ca3117a ("drm/tests: cmdline: Fix drm_display_mode memory leak")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5e2a973448d958feb7881e4d875eac59fdeff3d ]
As of today, rtnl code creates a new skb and unconditionally fills and
broadcasts it to the relevant group. For most operations this is okay
and doesn't waste resources in general.
When operations are done without the rtnl_lock, as in tc-flower, such
skb allocation, message fill and no-op broadcasting can happen in all
cores of the system, which contributes to system pressure and wastes
precious cpu cycles when no one will receive the built message.
Introduce this helper so rtnetlink operations can simply check if someone
is listening and then proceed if necessary.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20231208192847.714940-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 369609fc6272 ("tc: Ensure we have enough buffer space when sending filter netlink notifications")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bd13edbbed6e7e396f1aab92b224a4775218e68 ]
Add poll syscall support on the `hist` file. The Waiter will be waken
up when the histogram is updated with POLLIN.
Currently, there is no way to wait for a specific event in userspace.
So user needs to peek the `trace` periodicaly, or wait on `trace_pipe`.
But it is not a good idea to peek at the `trace` for an event that
randomly happens. And `trace_pipe` is not coming back until a page is
filled with events.
This allows a user to wait for a specific event on the `hist` file. User
can set a histogram trigger on the event which they want to monitor
and poll() on its `hist` file. Since this poll() returns POLLIN, the next
poll() will return soon unless a read() happens on that hist file.
NOTE: To read the hist file again, you must set the file offset to 0,
but just for monitoring the event, you may not need to read the
histogram.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173527247756.464571.14236296701625509931.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: 0b4ffbe4888a ("tracing: Correct the refcount if the hist/hist_debug file fails to open")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d23569979ca1cd139a42c410e0c7b9e6014c3b3a ]
A trace instance may only need to enable specific events. As the eventfs
directory of an instance currently creates all events which adds overhead,
allow internal instances to be created with just the events in systems
that they care about. This currently only deals with systems and not
individual events, but this should bring down the overhead of creating
instances for specific use cases quite bit.
The trace_array_get_by_name() now has another parameter "systems". This
parameter is a const string pointer of a comma/space separated list of
event systems that should be created by the trace_array. (Note if the
trace_array already exists, this parameter is ignored).
The list of systems is saved and if a module is loaded, its events will
not be added unless the system for those events also match the systems
string.
Link: https://lore.kernel.org/linux-trace-kernel/20231213093701.03fddec0@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Arun Easi <aeasi@marvell.com>
Cc: Daniel Wagner <dwagner@suse.de>
Tested-by: Dmytro Maluka <dmaluka@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: 0b4ffbe4888a ("tracing: Correct the refcount if the hist/hist_debug file fails to open")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ff6039ffb79a4a8a44b63810a8a2f2b43264856 ]
As recommended by section 4.3.7 ("Synchronization when using system
instructions to progrom the trace unit") of ARM IHI 0064H.b, the
self-hosted trace analyzer must perform a Context synchronization
event between writing to the TRCPRGCTLR and reading the TRCSTATR.
Additionally, add an ISB between the each read of TRCSTATR on
coresight_timeout() when using system instructions to program the
trace unit.
Fixes: 1ab3bb9df5 ("coresight: etm4x: Add necessary synchronization for sysreg access")
Signed-off-by: Yuanfang Zhang <quic_yuanfang@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250116-etm_sync-v4-1-39f2b05e9514@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1ecb30f90856b0be4168ad51b8875148e285c1f ]
Commit 467f432a52 ("RDMA/core: Split port and device counter sysfs
attributes") accidentally almost exposed hw counters to non-init net
namespaces. It didn't expose them fully, as an attempt to read any of
those counters leads to a crash like this one:
[42021.807566] BUG: kernel NULL pointer dereference, address: 0000000000000028
[42021.814463] #PF: supervisor read access in kernel mode
[42021.819549] #PF: error_code(0x0000) - not-present page
[42021.824636] PGD 0 P4D 0
[42021.827145] Oops: 0000 [#1] SMP PTI
[42021.830598] CPU: 82 PID: 2843922 Comm: switchto-defaul Kdump: loaded Tainted: G S W I XXX
[42021.841697] Hardware name: XXX
[42021.849619] RIP: 0010:hw_stat_device_show+0x1e/0x40 [ib_core]
[42021.855362] Code: 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 49 89 d0 4c 8b 5e 20 48 8b 8f b8 04 00 00 48 81 c7 f0 fa ff ff <48> 8b 41 28 48 29 ce 48 83 c6 d0 48 c1 ee 04 69 d6 ab aa aa aa 48
[42021.873931] RSP: 0018:ffff97fe90f03da0 EFLAGS: 00010287
[42021.879108] RAX: ffff9406988a8c60 RBX: ffff940e1072d438 RCX: 0000000000000000
[42021.886169] RDX: ffff94085f1aa000 RSI: ffff93c6cbbdbcb0 RDI: ffff940c7517aef0
[42021.893230] RBP: ffff97fe90f03e70 R08: ffff94085f1aa000 R09: 0000000000000000
[42021.900294] R10: ffff94085f1aa000 R11: ffffffffc0775680 R12: ffffffff87ca2530
[42021.907355] R13: ffff940651602840 R14: ffff93c6cbbdbcb0 R15: ffff94085f1aa000
[42021.914418] FS: 00007fda1a3b9700(0000) GS:ffff94453fb80000(0000) knlGS:0000000000000000
[42021.922423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[42021.928130] CR2: 0000000000000028 CR3: 00000042dcfb8003 CR4: 00000000003726f0
[42021.935194] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[42021.942257] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[42021.949324] Call Trace:
[42021.951756] <TASK>
[42021.953842] [<ffffffff86c58674>] ? show_regs+0x64/0x70
[42021.959030] [<ffffffff86c58468>] ? __die+0x78/0xc0
[42021.963874] [<ffffffff86c9ef75>] ? page_fault_oops+0x2b5/0x3b0
[42021.969749] [<ffffffff87674b92>] ? exc_page_fault+0x1a2/0x3c0
[42021.975549] [<ffffffff87801326>] ? asm_exc_page_fault+0x26/0x30
[42021.981517] [<ffffffffc0775680>] ? __pfx_show_hw_stats+0x10/0x10 [ib_core]
[42021.988482] [<ffffffffc077564e>] ? hw_stat_device_show+0x1e/0x40 [ib_core]
[42021.995438] [<ffffffff86ac7f8e>] dev_attr_show+0x1e/0x50
[42022.000803] [<ffffffff86a3eeb1>] sysfs_kf_seq_show+0x81/0xe0
[42022.006508] [<ffffffff86a11134>] seq_read_iter+0xf4/0x410
[42022.011954] [<ffffffff869f4b2e>] vfs_read+0x16e/0x2f0
[42022.017058] [<ffffffff869f50ee>] ksys_read+0x6e/0xe0
[42022.022073] [<ffffffff8766f1ca>] do_syscall_64+0x6a/0xa0
[42022.027441] [<ffffffff8780013b>] entry_SYSCALL_64_after_hwframe+0x78/0xe2
The problem can be reproduced using the following steps:
ip netns add foo
ip netns exec foo bash
cat /sys/class/infiniband/mlx4_0/hw_counters/*
The panic occurs because of casting the device pointer into an
ib_device pointer using container_of() in hw_stat_device_show() is
wrong and leads to a memory corruption.
However the real problem is that hw counters should never been exposed
outside of the non-init net namespace.
Fix this by saving the index of the corresponding attribute group
(it might be 1 or 2 depending on the presence of driver-specific
attributes) and zeroing the pointer to hw_counters group for compat
devices during the initialization.
With this fix applied hw_counters are not available in a non-init
net namespace:
find /sys/class/infiniband/mlx4_0/ -name hw_counters
/sys/class/infiniband/mlx4_0/ports/1/hw_counters
/sys/class/infiniband/mlx4_0/ports/2/hw_counters
/sys/class/infiniband/mlx4_0/hw_counters
ip netns add foo
ip netns exec foo bash
find /sys/class/infiniband/mlx4_0/ -name hw_counters
Fixes: 467f432a52 ("RDMA/core: Split port and device counter sysfs attributes")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Maher Sanalla <msanalla@nvidia.com>
Cc: linux-rdma@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: https://patch.msgid.link/20250227165420.3430301-1-roman.gushchin@linux.dev
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc84bc2aba85a1508f04a936f9f9a15f64ebfb31 ]
If track_pfn_copy() fails, we already added the dst VMA to the maple
tree. As fork() fails, we'll cleanup the maple tree, and stumble over
the dst VMA for which we neither performed any reservation nor copied
any page tables.
Consequently untrack_pfn() will see VM_PAT and try obtaining the
PAT information from the page table -- which fails because the page
table was not copied.
The easiest fix would be to simply clear the VM_PAT flag of the dst VMA
if track_pfn_copy() fails. However, the whole thing is about "simply"
clearing the VM_PAT flag is shaky as well: if we passed track_pfn_copy()
and performed a reservation, but copying the page tables fails, we'll
simply clear the VM_PAT flag, not properly undoing the reservation ...
which is also wrong.
So let's fix it properly: set the VM_PAT flag only if the reservation
succeeded (leaving it clear initially), and undo the reservation if
anything goes wrong while copying the page tables: clearing the VM_PAT
flag after undoing the reservation.
Note that any copied page table entries will get zapped when the VMA will
get removed later, after copy_page_range() succeeded; as VM_PAT is not set
then, we won't try cleaning VM_PAT up once more and untrack_pfn() will be
happy. Note that leaving these page tables in place without a reservation
is not a problem, as we are aborting fork(); this process will never run.
A reproducer can trigger this usually at the first try:
https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/reproducers/pat_fork.c
WARNING: CPU: 26 PID: 11650 at arch/x86/mm/pat/memtype.c:983 get_pat_info+0xf6/0x110
Modules linked in: ...
CPU: 26 UID: 0 PID: 11650 Comm: repro3 Not tainted 6.12.0-rc5+ #92
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:get_pat_info+0xf6/0x110
...
Call Trace:
<TASK>
...
untrack_pfn+0x52/0x110
unmap_single_vma+0xa6/0xe0
unmap_vmas+0x105/0x1f0
exit_mmap+0xf6/0x460
__mmput+0x4b/0x120
copy_process+0x1bf6/0x2aa0
kernel_clone+0xab/0x440
__do_sys_clone+0x66/0x90
do_syscall_64+0x95/0x180
Likely this case was missed in:
d155df53f3 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
... and instead of undoing the reservation we simply cleared the VM_PAT flag.
Keep the documentation of these functions in include/linux/pgtable.h,
one place is more than sufficient -- we should clean that up for the other
functions like track_pfn_remap/untrack_pfn separately.
Fixes: d155df53f3 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
Fixes: 2ab640379a ("x86: PAT: hooks in generic vm code to help archs to track pfnmap regions - v3")
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yuxin wang <wang1315768607@163.com>
Reported-by: Marius Fleischer <fleischermarius@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20250321112323.153741-1-david@redhat.com
Closes: https://lore.kernel.org/lkml/CABOYnLx_dnqzpCW99G81DmOr+2UzdmZMk=T3uxwNxwz+R1RAwg@mail.gmail.com/
Closes: https://lore.kernel.org/lkml/CAJg=8jwijTP5fre8woS4JVJQ8iUA6v+iNcsOgtj9Zfpc3obDOQ@mail.gmail.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb50844d728f11e87491f7c7af15a4a737f1159d ]
Currently, the following two macros have different values:
// The maximal argument count for firmware node reference
#define NR_FWNODE_REFERENCE_ARGS 8
// The maximal argument count for DT node reference
#define MAX_PHANDLE_ARGS 16
It may cause firmware node reference's argument count out of range if
directly assign DT node reference's argument count to firmware's.
drivers/of/property.c:of_fwnode_get_reference_args() is doing the direct
assignment, so may cause firmware's argument count @args->nargs got out
of range, namely, in [9, 16].
Fix by increasing NR_FWNODE_REFERENCE_ARGS to 16 to meet DT requirement.
Will align both macros later to avoid such inconsistency.
Fixes: 3e3119d308 ("device property: Introduce fwnode_property_get_reference_args")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250225-fix_arg_count-v4-1-13cdc519eb31@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bbce873a9c97cb12f5455c497be279ac58e707f ]
[Why]
The RAD of sideband message printed today is incorrect.
For RAD stored within MST branch
- If MST branch LCT is 1, it's RAD array is untouched and remained as 0.
- If MST branch LCT is larger than 1, use nibble to store the up facing
port number in cascaded sequence as illustrated below:
u8 RAD[0] = (LCT_2_UFP << 4) | LCT_3_UFP
RAD[1] = (LCT_4_UFP << 4) | LCT_5_UFP
...
In drm_dp_mst_rad_to_str(), it wrongly to use BIT_MASK(4) to fetch the port
number of one nibble.
[How]
Adjust the code by:
- RAD array items are valuable only for LCT >= 1.
- Use 0xF as the mask to replace BIT_MASK(4)
V2:
- Document how RAD is constructed (Imre)
V3:
- Adjust the comment for rad[] so kdoc formats it properly (Lyude)
Fixes: 2f015ec6ea ("drm/dp_mst: Add sideband down request tracing + selftests")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113091100.3314533-2-Wayne.Lin@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87886b32d669abc11c7be95ef44099215e4f5788 ]
disable_irq_nosync_lockdep() disables interrupts with lockdep enabled to
avoid false positive reports by lockdep that a certain lock has not been
acquired with disabled interrupts. The user of this macros expects that
a lock can be acquried without disabling interrupts because the IRQ line
triggering the interrupt is disabled.
This triggers a warning on PREEMPT_RT because after
disable_irq_nosync_lockdep.*() the following spinlock_t now is acquired
with disabled interrupts.
On PREEMPT_RT there is no difference between spin_lock() and
spin_lock_irq() so avoiding disabling interrupts in this case works for
the two remaining callers as of today.
Don't disable interrupts on PREEMPT_RT in disable_irq_nosync_lockdep.*().
Closes: https://lore.kernel.org/760e34f9-6034-40e0-82a5-ee9becd24438@roeck-us.net
Fixes: e8106b941c ("[PATCH] lockdep: core, add enable/disable_irq_irqsave/irqrestore() APIs")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250212103619.2560503-2-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eeb87d17aceab7803a5a5bcb6cf2817b745157cf ]
The check before setting power.must_resume in device_suspend_noirq()
does not take power.child_count into account, but it should do that, so
use pm_runtime_need_not_resume() in it for this purpose and adjust the
comment next to it accordingly.
Fixes: 107d47b2b9 ("PM: sleep: core: Simplify the SMART_SUSPEND flag handling")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3353728.44csPzL39Z@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6685a96c8c8a07e260e39bac86d4163cfb38a4d ]
Due to a typo during defining HCI errors it is not possible to connect
LE-capable device with BR/EDR only adapter. The connection is terminated
by the LE adapter because the invalid LL params error code is treated
as unsupported remote feature.
Fixes: 79c0868ad65a ("Bluetooth: hci_event: Use HCI error defines instead of magic values")
Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fa23e0d4b756d25829e124d6b670a4c6bbd4bf7e upstream.
Sven Auhagen reports transaction failures with following error:
./main.nft:13:1-26: Error: Could not process rule: Cannot allocate memory
percpu: allocation failed, size=16 align=8 atomic=1, atomic alloc failed, no space left
This points to failing pcpu allocation with GFP_ATOMIC flag.
However, transactions happen from user context and are allowed to sleep.
One case where we can call into percpu allocator with GFP_ATOMIC is
nft_counter expression.
Normally this happens from control plane, so this could use GFP_KERNEL
instead. But one use case, element insertion from packet path,
needs to use GFP_ATOMIC allocations (nft_dynset expression).
At this time, .clone callbacks always use GFP_ATOMIC for this reason.
Add gfp_t argument to the .clone function and pass GFP_KERNEL or
GFP_ATOMIC flag depending on context, this allows all clone memory
allocations to sleep for the normal (transaction) case.
Cc: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7395dfacfff65e9938ac0889dafa1ab01e987d15 upstream.
Add a timestamp field at the beginning of the transaction, store it
in the nftables per-netns area.
Update set backend .insert, .deactivate and sync gc path to use the
timestamp, this avoids that an element expires while control plane
transaction is still unfinished.
.lookup and .update, which are used from packet path, still use the
current time to check if the element has expired. And .get path and dump
also since this runs lockless under rcu read size lock. Then, there is
async gc which also needs to check the current time since it runs
asynchronously from a workqueue.
Fixes: c3e1b005ed ("netfilter: nf_tables: add set element timeout support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0eba2a7e858907a746ba69cd002eb9eb4dbd7bf3 ]
This reverts commit 9bdd10d57a ("ASoC: ops: Shift tested values in
snd_soc_put_volsw() by +min"), and makes some additional related
updates.
There are two ways the platform_max could be interpreted; the maximum
register value, or the maximum value the control can be set to. The
patch moved from treating the value as a control value to a register
one. When the patch was applied it was technically correct as
snd_soc_limit_volume() also used the register interpretation. However,
even then most of the other usages treated platform_max as a
control value, and snd_soc_limit_volume() has since been updated to
also do so in commit fb9ad24485087 ("ASoC: ops: add correct range
check for limiting volume"). That patch however, missed updating
snd_soc_put_volsw() back to the control interpretation, and fixing
snd_soc_info_volsw_range(). The control interpretation makes more
sense as limiting is typically done from the machine driver, so it is
appropriate to use the customer facing representation rather than the
internal codec representation. Update all the code to consistently use
this interpretation of platform_max.
Finally, also add some comments to the soc_mixer_control struct to
hopefully avoid further patches switching between the two approaches.
Fixes: fb9ad24485087 ("ASoC: ops: add correct range check for limiting volume")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250228151456.3703342-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 87585b05757dc70545efb434669708d276125559 upstream.
Rather than use remap_pfn_range() for this and manually free later,
switch to using vm_insert_page() and have it Just Work.
This requires a bit of effort on the mmap lookup side, as the ctx
uring_lock isn't held, which otherwise protects buffer_lists from being
torn down, and it's not safe to grab from mmap context that would
introduce an ABBA deadlock between the mmap lock and the ctx uring_lock.
Instead, lookup the buffer_list under RCU, as the the list is RCU freed
already. Use the existing reference count to determine whether it's
possible to safely grab a reference to it (eg if it's not zero already),
and drop that reference when done with the mapping. If the mmap
reference is the last one, the buffer_list and the associated memory can
go away, since the vma insertion has references to the inserted pages at
that point.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b4c173dfbb6c78568578ff18f9e8822d7bd0e31b ]
Fuse allows the value of a symlink to change and this property is exploited
by some filesystems (e.g. CVMFS).
It has been observed, that sometimes after changing the symlink contents,
the value is truncated to the old size.
This is caused by fuse_getattr() racing with fuse_reverse_inval_inode().
fuse_reverse_inval_inode() updates the fuse_inode's attr_version, which
results in fuse_change_attributes() exiting before updating the cached
attributes
This is okay, as the cached attributes remain invalid and the next call to
fuse_change_attributes() will likely update the inode with the correct
values.
The reason this causes problems is that cached symlinks will be
returned through page_get_link(), which truncates the symlink to
inode->i_size. This is correct for filesystems that don't mutate
symlinks, but in this case it causes bad behavior.
The solution is to just remove this truncation. This can cause a
regression in a filesystem that relies on supplying a symlink larger than
the file size, but this is unlikely. If that happens we'd need to make
this behavior conditional.
Reported-by: Laura Promberger <laura.promberger@cern.ch>
Tested-by: Sam Lewis <samclewis@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250220100258.793363-1-mszeredi@redhat.com
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84e009042d0f3dfe91bec60bcd208ee3f866cbcd ]
Previously, the NVMe/TCP host driver did not handle the C2HTermReq PDU,
instead printing "unsupported pdu type (3)" when received. This patch adds
support for processing the C2HTermReq PDU, allowing the driver
to print the Fatal Error Status field.
Example of output:
nvme nvme4: Received C2HTermReq (FES = Invalid PDU Header Field)
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab6ab707a4d060a51c45fc13e3b2228d5f7c0b87 ]
This reverts commit 4d94f05558271654670d18c26c912da0c1c15549 which has
problems (see [1]) and is no longer needed since 581dd2dc168f
("Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating")
has reworked the code where the original bug has been found.
[1] Link: https://lore.kernel.org/linux-bluetooth/877c55ci1r.wl-tiwai@suse.de/T/#t
Fixes: 4d94f0555827 ("Bluetooth: hci_core: Fix sleeping function called from invalid context")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 531b2ca0a940ac9db03f246c8b77c4201de72b00 upstream.
According to the data sheet, writing the MODE register should stop the
counter (and thus the interrupts). This appears to work on real hardware,
at least modern Intel and AMD systems. It should also work on Hyper-V.
However, on some buggy virtual machines the mode change doesn't have any
effect until the counter is subsequently loaded (or perhaps when the IRQ
next fires).
So, set MODE 0 and then load the counter, to ensure that those buggy VMs
do the right thing and the interrupts stop. And then write MODE 0 *again*
to stop the counter on compliant implementations too.
Apparently, Hyper-V keeps firing the IRQ *repeatedly* even in mode zero
when it should only happen once, but the second MODE write stops that too.
Userspace test program (mostly written by tglx):
=====
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <stdint.h>
#include <sys/io.h>
static __always_inline void __out##bwl(type value, uint16_t port) \
{ \
asm volatile("out" #bwl " %" #bw "0, %w1" \
: : "a"(value), "Nd"(port)); \
} \
\
static __always_inline type __in##bwl(uint16_t port) \
{ \
type value; \
asm volatile("in" #bwl " %w1, %" #bw "0" \
: "=a"(value) : "Nd"(port)); \
return value; \
}
BUILDIO(b, b, uint8_t)
#define inb __inb
#define outb __outb
#define PIT_MODE 0x43
#define PIT_CH0 0x40
#define PIT_CH2 0x42
static int is8254;
static void dump_pit(void)
{
if (is8254) {
// Latch and output counter and status
outb(0xC2, PIT_MODE);
printf("%02x %02x %02x\n", inb(PIT_CH0), inb(PIT_CH0), inb(PIT_CH0));
} else {
// Latch and output counter
outb(0x0, PIT_MODE);
printf("%02x %02x\n", inb(PIT_CH0), inb(PIT_CH0));
}
}
int main(int argc, char* argv[])
{
int nr_counts = 2;
if (argc > 1)
nr_counts = atoi(argv[1]);
if (argc > 2)
is8254 = 1;
if (ioperm(0x40, 4, 1) != 0)
return 1;
dump_pit();
printf("Set oneshot\n");
outb(0x38, PIT_MODE);
outb(0x00, PIT_CH0);
outb(0x0F, PIT_CH0);
dump_pit();
usleep(1000);
dump_pit();
printf("Set periodic\n");
outb(0x34, PIT_MODE);
outb(0x00, PIT_CH0);
outb(0x0F, PIT_CH0);
dump_pit();
usleep(1000);
dump_pit();
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
printf("Set stop (%d counter writes)\n", nr_counts);
outb(0x30, PIT_MODE);
while (nr_counts--)
outb(0xFF, PIT_CH0);
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
printf("Set MODE 0\n");
outb(0x30, PIT_MODE);
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
return 0;
}
=====
Suggested-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhkelley@outlook.com>
Link: https://lore.kernel.org/all/20240802135555.564941-2-dwmw2@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02410ac72ac3707936c07ede66e94360d0d65319 upstream.
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the huge_pte is being cleared in huge_ptep_get_and_clear().
Provide for this by adding an `unsigned long sz` parameter to the
function. This follows the same pattern as huge_pte_clear() and
set_huge_pte_at().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, loongarch, mips,
parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed
in a separate commit.
Cc: stable@vger.kernel.org
Fixes: 66b3923a1a ("arm64: hugetlb: add support for PTE contiguous bit")
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> # riscv
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390
Link: https://lore.kernel.org/r/20250226120656.2400136-2-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce6d9c1c2b5cc785016faa11b48b6cd317eb367e upstream.
Add PF_KCOMPACTD flag and current_is_kcompactd() helper to check for it so
nfs_release_folio() can skip calling nfs_wb_folio() from kcompactd.
Otherwise NFS can deadlock waiting for kcompactd enduced writeback which
recurses back to NFS (which triggers writeback to NFSD via NFS loopback
mount on the same host, NFSD blocks waiting for XFS's call to
__filemap_get_folio):
6070.550357] INFO: task kcompactd0:58 blocked for more than 4435 seconds.
{---
[58] "kcompactd0"
[<0>] folio_wait_bit+0xe8/0x200
[<0>] folio_wait_writeback+0x2b/0x80
[<0>] nfs_wb_folio+0x80/0x1b0 [nfs]
[<0>] nfs_release_folio+0x68/0x130 [nfs]
[<0>] split_huge_page_to_list_to_order+0x362/0x840
[<0>] migrate_pages_batch+0x43d/0xb90
[<0>] migrate_pages_sync+0x9a/0x240
[<0>] migrate_pages+0x93c/0x9f0
[<0>] compact_zone+0x8e2/0x1030
[<0>] compact_node+0xdb/0x120
[<0>] kcompactd+0x121/0x2e0
[<0>] kthread+0xcf/0x100
[<0>] ret_from_fork+0x31/0x40
[<0>] ret_from_fork_asm+0x1a/0x30
---}
[akpm@linux-foundation.org: fix build]
Link: https://lkml.kernel.org/r/20250225022002.26141-1-snitzer@kernel.org
Fixes: 96780ca55e ("NFS: fix up nfs_release_folio() to try to release the page")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9a49520679e98700d3d89689cc91c08a1c88c1d upstream.
Kernel test robot reported an "imbalanced put" in the rcuref_put() slow
path, which turned out to be a false positive. Consider the following race:
ref = 0 (via rcuref_init(ref, 1))
T1 T2
rcuref_put(ref)
-> atomic_add_negative_release(-1, ref) # ref -> 0xffffffff
-> rcuref_put_slowpath(ref)
rcuref_get(ref)
-> atomic_add_negative_relaxed(1, &ref->refcnt)
-> return true; # ref -> 0
rcuref_put(ref)
-> atomic_add_negative_release(-1, ref) # ref -> 0xffffffff
-> rcuref_put_slowpath()
-> cnt = atomic_read(&ref->refcnt); # cnt -> 0xffffffff / RCUREF_NOREF
-> atomic_try_cmpxchg_release(&ref->refcnt, &cnt, RCUREF_DEAD)) # ref -> 0xe0000000 / RCUREF_DEAD
-> return true
-> cnt = atomic_read(&ref->refcnt); # cnt -> 0xe0000000 / RCUREF_DEAD
-> if (cnt > RCUREF_RELEASED) # 0xe0000000 > 0xc0000000
-> WARN_ONCE(cnt >= RCUREF_RELEASED, "rcuref - imbalanced put()")
The problem is the additional read in the slow path (after it
decremented to RCUREF_NOREF) which can happen after the counter has been
marked RCUREF_DEAD.
Prevent this by reusing the return value of the decrement. Now every "final"
put uses RCUREF_NOREF in the slow path and attempts the final cmpxchg() to
RCUREF_DEAD.
[ bigeasy: Add changelog ]
Fixes: ee1ee6db07 ("atomics: Provide rcuref - scalable reference counting")
Reported-by: kernel test robot <oliver.sang@intel.com>
Debugged-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/oe-lkp/202412311453.9d7636a2-lkp@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68f3ea7ee199ef77551e090dfef5a49046ea8443 upstream.
In the kernel, there are architectures (x86, arm64) that perform
boot-time relocation (for KASLR) without relying on PIE codegen. In this
case, all const global objects are emitted into .rodata, including const
objects with fields that will be fixed up by the boot-time relocation
code. This implies that .rodata (and .text in some cases) need to be
writable at boot, but they will usually be mapped read-only as soon as
the boot completes.
When using PIE codegen, the compiler will emit const global objects into
.data.rel.ro rather than .rodata if the object contains fields that need
such fixups at boot-time. This permits the linker to annotate such
regions as requiring read-write access only at load time, but not at
execution time (in user space), while keeping .rodata truly const (in
user space, this is important for reducing the CoW footprint of dynamic
executables).
This distinction does not matter for the kernel, but it does imply that
const data will end up in writable memory if the .data.rel.ro sections
are not treated in a special way, as they will end up in the writable
.data segment by default.
So emit .data.rel.ro into the .rodata segment.
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250221135704.431269-5-ardb+git@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0600cf40e9b36fe17f9c9f04d4f9cef249eaa5e7 ]
Add static inline dst_dev_overhead() function to include/net/dst.h. This
helper function is used by ioam6_iptunnel, rpl_iptunnel and
seg6_iptunnel to get the dev's overhead based on a cache entry
(dst_entry). If the cache is empty, the default and generic value
skb->mac_len is returned. Otherwise, LL_RESERVED_SPACE() over dst's dev
is returned.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: c64a0727f9b1 ("net: ipv6: fix dst ref loop on input in seg6 lwt")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e863e5db6185b1add0df4cb01b31a4ed1c4b738 ]
Pass a dscp_t variable to ip_route_input(), instead of a plain u8, to
prevent accidental setting of ECN bits in ->flowi4_tos.
Callers of ip_route_input() to consider are:
* input_action_end_dx4_finish() and input_action_end_dt4() in
net/ipv6/seg6_local.c. These functions set the tos parameter to 0,
which is already a valid dscp_t value, so they don't need to be
adjusted for the new prototype.
* icmp_route_lookup(), which already has a dscp_t variable to pass as
parameter. We just need to remove the inet_dscp_to_dsfield()
conversion.
* br_nf_pre_routing_finish(), ip_options_rcv_srr() and ip4ip6_err(),
which get the DSCP directly from IPv4 headers. Define a helper to
read the .tos field of struct iphdr as dscp_t, so that these
function don't have to do the conversion manually.
While there, declare *iph as const in br_nf_pre_routing_finish(),
declare its local variables in reverse-christmas-tree order and move
the "err = ip_route_input()" assignment out of the conditional to avoid
checkpatch warning.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/e9d40781d64d3d69f4c79ac8a008b8d67a033e8d.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 27843ce6ba3d ("ipvlan: ensure network headers are in skb linear part")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db3efdcf70c752e8a8deb16071d8e693c3ef8746 ]
Introduce a tracepoint for icmp_send, which can help users to get more
detail information conveniently when icmp abnormal events happen.
1. Giving an usecase example:
=============================
When an application experiences packet loss due to an unreachable UDP
destination port, the kernel will send an exception message through the
icmp_send function. By adding a trace point for icmp_send, developers or
system administrators can obtain detailed information about the UDP
packet loss, including the type, code, source address, destination address,
source port, and destination port. This facilitates the trouble-shooting
of UDP packet loss issues especially for those network-service
applications.
2. Operation Instructions:
==========================
Switch to the tracing directory.
cd /sys/kernel/tracing
Filter for destination port unreachable.
echo "type==3 && code==3" > events/icmp/icmp_send/filter
Enable trace event.
echo 1 > events/icmp/icmp_send/enable
3. Result View:
================
udp_client_erro-11370 [002] ...s.12 124.728002:
icmp_send: icmp_send: type=3, code=3.
From 127.0.0.1:41895 to 127.0.0.1:6666 ulen=23
skbaddr=00000000589b167a
Signed-off-by: Peilin He <he.peilin@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: Liu Chun <liu.chun2@zte.com.cn>
Cc: Xuexin Jiang <jiang.xuexin@zte.com.cn>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 27843ce6ba3d ("ipvlan: ensure network headers are in skb linear part")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bbd6e863b15a85221e49b9bdb2d5d8f0bb91f3d ]
If rpc_signal_task() is called while a task is in an rpc_call_done()
callback function, and the latter calls rpc_restart_call(), the task can
end up looping due to the RPC_TASK_SIGNALLED flag being set without the
tk_rpc_status being set.
Removing the redundant mechanism for signalling the task fixes the
looping behaviour.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Fixes: 39494194f9 ("SUNRPC: Fix races with rpc_killall_tasks()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
