Pull MD updates from Song:
"The major changes are:
- REQ_NOWAIT support, by Vishal Verma
- raid6 benchmark optimization, by Dirk Müller
- Fix for acct bioset, by Xiao Ni
- Clean up max_queued_requests, by Mariusz Tkaczyk
- PREEMPT_RT optimization, by Davidlohr Bueso
- Use default_groups in kobj_type, by Greg Kroah-Hartman"
* 'md-next' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/song/md:
md: use default_groups in kobj_type
md: Move alloc/free acct bioset in to personality
lib/raid6: Use strict priority ranking for pq gen() benchmarking
lib/raid6: skip benchmark of non-chosen xor_syndrome functions
md: fix spelling of "its"
md: raid456 add nowait support
md: raid10 add nowait support
md: raid1 add nowait support
md: add support for REQ_NOWAIT
md: drop queue limitation for RAID1 and RAID10
md/raid5: play nice with PREEMPT_RT
Inodes aren't supposed to have a project id of -1U (aka 4294967295) but
the kernel hasn't always validated FSSETXATTR correctly. Flag this as
something for the sysadmin to check out.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Online fsck depends on callers holding ILOCK_EXCL from the time they
decide to update a block mapping until after they've updated the reverse
mapping records to guarantee the stability of both mapping records.
Unfortunately, the quota code drops ILOCK_EXCL at the first transaction
roll in the dquot allocation process, which breaks that assertion. This
leads to sporadic failures in the online rmap repair code if the repair
code grabs the AGF after bmapi_write maps a new block into the quota
file's data fork but before it can finish the deferred rmap update.
Fix this by rewriting the function to hold the ILOCK until after the
transaction commit like all other bmap updates do, and get rid of the
dqread wrapper that does nothing but complicate the codebase.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
mp is being initialized to log->l_mp but this is never read
as record is overwritten later on. Remove the redundant
assignment.
Cleans up the following clang-analyzer warning:
fs/xfs/xfs_log_recover.c:3543:20: warning: Value stored to 'mp' during
its initialization is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Oh, let me count the ways that the kvmalloc API sucks dog eggs.
The problem is when we are logging lots of large objects, we hit
kvmalloc really damn hard with costly order allocations, and
behaviour utterly sucks:
- 49.73% xlog_cil_commit
- 31.62% kvmalloc_node
- 29.96% __kmalloc_node
- 29.38% kmalloc_large_node
- 29.33% __alloc_pages
- 24.33% __alloc_pages_slowpath.constprop.0
- 18.35% __alloc_pages_direct_compact
- 17.39% try_to_compact_pages
- compact_zone_order
- 15.26% compact_zone
5.29% __pageblock_pfn_to_page
3.71% PageHuge
- 1.44% isolate_migratepages_block
0.71% set_pfnblock_flags_mask
1.11% get_pfnblock_flags_mask
- 0.81% get_page_from_freelist
- 0.59% _raw_spin_lock_irqsave
- do_raw_spin_lock
__pv_queued_spin_lock_slowpath
- 3.24% try_to_free_pages
- 3.14% shrink_node
- 2.94% shrink_slab.constprop.0
- 0.89% super_cache_count
- 0.66% xfs_fs_nr_cached_objects
- 0.65% xfs_reclaim_inodes_count
0.55% xfs_perag_get_tag
0.58% kfree_rcu_shrink_count
- 2.09% get_page_from_freelist
- 1.03% _raw_spin_lock_irqsave
- do_raw_spin_lock
__pv_queued_spin_lock_slowpath
- 4.88% get_page_from_freelist
- 3.66% _raw_spin_lock_irqsave
- do_raw_spin_lock
__pv_queued_spin_lock_slowpath
- 1.63% __vmalloc_node
- __vmalloc_node_range
- 1.10% __alloc_pages_bulk
- 0.93% __alloc_pages
- 0.92% get_page_from_freelist
- 0.89% rmqueue_bulk
- 0.69% _raw_spin_lock
- do_raw_spin_lock
__pv_queued_spin_lock_slowpath
13.73% memcpy_erms
- 2.22% kvfree
On this workload, that's almost a dozen CPUs all trying to compact
and reclaim memory inside kvmalloc_node at the same time. Yet it is
regularly falling back to vmalloc despite all that compaction, page
and shrinker reclaim that direct reclaim is doing. Copying all the
metadata is taking far less CPU time than allocating the storage!
Direct reclaim should be considered extremely harmful.
This is a high frequency, high throughput, CPU usage and latency
sensitive allocation. We've got memory there, and we're using
kvmalloc to allow memory allocation to avoid doing lots of work to
try to do contiguous allocations.
Except it still does *lots of costly work* that is unnecessary.
Worse: the only way to avoid the slowpath page allocation trying to
do compaction on costly allocations is to turn off direct reclaim
(i.e. remove __GFP_RECLAIM_DIRECT from the gfp flags).
Unfortunately, the stupid kvmalloc API then says "oh, this isn't a
GFP_KERNEL allocation context, so you only get kmalloc!". This
cuts off the vmalloc fallback, and this leads to almost instant OOM
problems which ends up in filesystems deadlocks, shutdowns and/or
kernel crashes.
I want some basic kvmalloc behaviour:
- kmalloc for a contiguous range with fail fast semantics - no
compaction direct reclaim if the allocation enters the slow path.
- run normal vmalloc (i.e. GFP_KERNEL) if kmalloc fails
The really, really stupid part about this is these kvmalloc() calls
are run under memalloc_nofs task context, so all the allocations are
always reduced to GFP_NOFS regardless of the fact that kvmalloc
requires GFP_KERNEL to be passed in. IOWs, we're already telling
kvmalloc to behave differently to the gfp flags we pass in, but it
still won't allow vmalloc to be run with anything other than
GFP_KERNEL.
So, this patch open codes the kvmalloc() in the commit path to have
the above described behaviour. The result is we more than halve the
CPU time spend doing kvmalloc() in this path and transaction commits
with 64kB objects in them more than doubles. i.e. we get ~5x
reduction in CPU usage per costly-sized kvmalloc() invocation and
the profile looks like this:
- 37.60% xlog_cil_commit
16.01% memcpy_erms
- 8.45% __kmalloc
- 8.04% kmalloc_order_trace
- 8.03% kmalloc_order
- 7.93% alloc_pages
- 7.90% __alloc_pages
- 4.05% __alloc_pages_slowpath.constprop.0
- 2.18% get_page_from_freelist
- 1.77% wake_all_kswapds
....
- __wake_up_common_lock
- 0.94% _raw_spin_lock_irqsave
- 3.72% get_page_from_freelist
- 2.43% _raw_spin_lock_irqsave
- 5.72% vmalloc
- 5.72% __vmalloc_node_range
- 4.81% __get_vm_area_node.constprop.0
- 3.26% alloc_vmap_area
- 2.52% _raw_spin_lock
- 1.46% _raw_spin_lock
0.56% __alloc_pages_bulk
- 4.66% kvfree
- 3.25% vfree
- __vfree
- 3.23% __vunmap
- 1.95% remove_vm_area
- 1.06% free_vmap_area_noflush
- 0.82% _raw_spin_lock
- 0.68% _raw_spin_lock
- 0.92% _raw_spin_lock
- 1.40% kfree
- 1.36% __free_pages
- 1.35% __free_pages_ok
- 1.02% _raw_spin_lock_irqsave
It's worth noting that over 50% of the CPU time spent allocating
these shadow buffers is now spent on spinlocks. So the shadow buffer
allocation overhead is greatly reduced by getting rid of direct
reclaim from kmalloc, and could probably be made even less costly if
vmalloc() didn't use global spinlocks to protect it's structures.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the xfs sysfs code to use default_groups field which has
been the preferred way since aa30f47cf6 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: linux-xfs@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the md rdev sysfs code to use default_groups field which
has been the preferred way since commit aa30f47cf6 ("kobject: Add
support for default attribute groups to kobj_type") so that we can soon
get rid of the obsolete default_attrs field.
Cc: Song Liu <song@kernel.org>
Cc: linux-raid@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Song Liu <song@kernel.org>
The 'possible_idx' bitmap is set just after it is zeroed, so we can save
the first step.
The 'free_idx' bitmap is used only at the end of the function as the
result of a bitmap xor operation. So there is no need to explicitly
zero it before.
So, slightly simply the code and remove 2 useless 'bitmap_zero()' call
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In current switchdev implementation, every VF PR is assigned to
individual ring on switchdev ctrl VSI. For slow-path traffic, there
is a mapping VF->ring done in software based on src_vsi value (by
calling ice_eswitch_get_target_netdev function).
With this change, HW solution is introduced which is more
efficient. For each VF, src MAC (VF's MAC) filter will be created,
which forwards packets to the corresponding switchdev ctrl VSI queue
based on src MAC address.
This filter has to be removed and then replayed in case of
resetting one VF. Keep information about this rule in repr->mac_rule,
thanks to that we know which rule has to be removed and replayed
for a given VF.
In case of CORE/GLOBAL all rules are removed
automatically. We have to take care of readding them. This is done
by ice_replay_vsi_adv_rule.
When driver leaves switchdev mode, remove all advanced rules
from switchdev ctrl VSI. This is done by ice_rem_adv_rule_for_vsi.
Flag repr->rule_added is needed because in some cases reset
might be triggered before VF sends request to add MAC.
Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The init_freq_invariance_cppc function is implemented in smpboot and depends on
CONFIG_SMP.
MODPOST vmlinux.symvers
MODINFO modules.builtin.modinfo
GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
ld: drivers/acpi/cppc_acpi.o: in function `acpi_cppc_processor_probe':
/home/ray/brahma3/linux/drivers/acpi/cppc_acpi.c:819: undefined reference to `init_freq_invariance_cppc'
make: *** [Makefile:1161: vmlinux] Error 1
See https://lore.kernel.org/lkml/484af487-7511-647e-5c5b-33d4429acdec@infradead.org/.
Fixes: 41ea667227 ("x86, sched: Calculate frequency invariance for AMD systems")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Huang Rui <ray.huang@amd.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The AMD P-State driver is based on ACPI CPPC function, so ACPI should be
dependence of this driver in the kernel config.
In file included from ../drivers/cpufreq/amd-pstate.c:40:0:
../include/acpi/processor.h:226:2: error: unknown type name ‘phys_cpuid_t’
phys_cpuid_t phys_id; /* CPU hardware ID such as APIC ID for x86 */
^~~~~~~~~~~~
../include/acpi/processor.h:355:1: error: unknown type name ‘phys_cpuid_t’; did you mean ‘phys_addr_t’?
phys_cpuid_t acpi_get_phys_id(acpi_handle, int type, u32 acpi_id);
^~~~~~~~~~~~
phys_addr_t
CC drivers/rtc/rtc-rv3029c2.o
../include/acpi/processor.h:356:1: error: unknown type name ‘phys_cpuid_t’; did you mean ‘phys_addr_t’?
phys_cpuid_t acpi_map_madt_entry(u32 acpi_id);
^~~~~~~~~~~~
phys_addr_t
../include/acpi/processor.h:357:20: error: unknown type name ‘phys_cpuid_t’; did you mean ‘phys_addr_t’?
int acpi_map_cpuid(phys_cpuid_t phys_id, u32 acpi_id);
^~~~~~~~~~~~
phys_addr_t
See https://lore.kernel.org/lkml/20e286d4-25d7-fb6e-31a1-4349c805aae3@infradead.org/.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Huang Rui <ray.huang@amd.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add the description of @req and @boost_supported in struct amd_cpudata
kernel-doc comment to remove warnings found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
drivers/cpufreq/amd-pstate.c:104: warning: Function parameter or member
'req' not described in 'amd_cpudata'
drivers/cpufreq/amd-pstate.c:104: warning: Function parameter or member
'boost_supported' not described in 'amd_cpudata'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ice_replay_vsi_adv_rule will replay advanced rules for a given VSI.
Exit this function when list of rules for given recipe is empty.
Do not add rule when given vsi_handle does not match vsi_handle
from the rule info.
Use ICE_MAX_NUM_RECIPES instead of ICE_SW_LKUP_LAST in order to find
advanced rules as well.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
On x86_64, currently 3 variants of AVX512, 3 variants of AVX2
and 3 variants of SSE2 are benchmarked on initialization, taking
between 144-153 jiffies. Testing across a hardware pool of
various generations of intel cpus I could not find a single
case where SSE2 won over AVX2 or AVX512. There are cases where
AVX2 wins over AVX512 however.
Change "prefer" into an integer priority field (similar to
how recov selection works) to have more than one ranking level
available, which is backwards compatible with existing behavior.
Give AVX2/512 variants higher priority over SSE2 in order to skip
SSE testing when AVX is available. in a AVX2/x86_64/HZ=250 case this
saves in the order of 200ms of initialization time.
Signed-off-by: Dirk Müller <dmueller@suse.de>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Song Liu <song@kernel.org>
In commit fe5cbc6e06 ("md/raid6 algorithms: delta syndrome functions")
a xor_syndrome() benchmarking was added also to the raid6_choose_gen()
function. However, the results of that benchmarking were intentionally
discarded and did not influence the choice. It picked the
xor_syndrome() variant related to the best performing gen_syndrome().
Reduce runtime of raid6_choose_gen() without modifying its outcome by
only benchmarking the xor_syndrome() of the best gen_syndrome() variant.
For a HZ=250 x86_64 system with avx2 and without avx512 this removes
5 out of 6 xor() benchmarks, saving 340ms of raid6 initialization time.
Signed-off-by: Dirk Müller <dmueller@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
Returns EAGAIN in case the raid456 driver would block waiting for reshape.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Song Liu <song@kernel.org>
This adds nowait support to the RAID10 driver. Very similar to
raid1 driver changes. It makes RAID10 driver return with EAGAIN
for situations where it could wait for eg:
- Waiting for the barrier,
- Reshape operation,
- Discard operation.
wait_barrier() and regular_request_wait() fn are modified to return bool
to support error for wait barriers. They returns true in case of wait
or if wait is not required and returns false if wait was required
but not performed to support nowait.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Song Liu <song@kernel.org>
This adds nowait support to the RAID1 driver. It makes RAID1 driver
return with EAGAIN for situations where it could wait for eg:
- Waiting for the barrier,
wait_barrier() fn is modified to return bool to support error for
wait barriers. It returns true in case of wait or if wait is not
required and returns false if wait was required but not performed
to support nowait.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Song Liu <song@kernel.org>
commit 021a24460d ("block: add QUEUE_FLAG_NOWAIT") added support
for checking whether a given bdev supports handling of REQ_NOWAIT or not.
Since then commit 6abc49468e ("dm: add support for REQ_NOWAIT and enable
it for linear target") added support for REQ_NOWAIT for dm. This uses
a similar approach to incorporate REQ_NOWAIT for md based bios.
This patch was tested using t/io_uring tool within FIO. A nvme drive
was partitioned into 2 partitions and a simple raid 0 configuration
/dev/md0 was created.
md0 : active raid0 nvme4n1p1[1] nvme4n1p2[0]
937423872 blocks super 1.2 512k chunks
Before patch:
$ ./t/io_uring /dev/md0 -p 0 -a 0 -d 1 -r 100
Running top while the above runs:
$ ps -eL | grep $(pidof io_uring)
38396 38396 pts/2 00:00:00 io_uring
38396 38397 pts/2 00:00:15 io_uring
38396 38398 pts/2 00:00:13 iou-wrk-38397
We can see iou-wrk-38397 io worker thread created which gets created
when io_uring sees that the underlying device (/dev/md0 in this case)
doesn't support nowait.
After patch:
$ ./t/io_uring /dev/md0 -p 0 -a 0 -d 1 -r 100
Running top while the above runs:
$ ps -eL | grep $(pidof io_uring)
38341 38341 pts/2 00:10:22 io_uring
38341 38342 pts/2 00:10:37 io_uring
After running this patch, we don't see any io worker thread
being created which indicated that io_uring saw that the
underlying device does support nowait. This is the exact behaviour
noticed on a dm device which also supports nowait.
For all the other raid personalities except raid0, we would need
to train pieces which involves make_request fn in order for them
to correctly handle REQ_NOWAIT.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Song Liu <song@kernel.org>
As suggested by Neil Brown[1], this limitation seems to be
deprecated.
With plugging in use, writes are processed behind the raid thread
and conf->pending_count is not increased. This limitation occurs only
if caller doesn't use plugs.
It can be avoided and often it is (with plugging). There are no reports
that queue is growing to enormous size so remove queue limitation for
non-plugged IOs too.
[1] https://lore.kernel.org/linux-raid/162496301481.7211.18031090130574610495@noble.neil.brown.name
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
raid_run_ops() relies on the implicitly disabled preemption for
its percpu ops, although this is really about CPU locality. This
breaks RT semantics as it can take regular (and thus sleeping)
spinlocks, such as stripe_lock.
Add a local_lock such that non-RT does not change and continues
to be just map to preempt_disable/enable, but makes RT happy as
the region will use a per-CPU spinlock and thus be preemptible
and still guarantee CPU locality.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Before we invoke spi_finalize_current_transfer() in
spi_gsi_callback_result() we should set the spi->cur_msg->status as
appropriate (0 for success, error otherwise).
The helps to return error on transfer and not wait till it timesout on
error
Fixes: b59c122484 ("spi: spi-geni-qcom: Add support for GPI dma")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220103071118.27220-1-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This function had kernel-doc that not used a hash to separate
the function name from the one line description.
The warning was found by running scripts/kernel-doc, which is
caused by using 'make W=1'.
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:271: warning: This comment
starts with '/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Specify that both TGL and ADL don't support DMA cache snooping.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The function performs a check on the hdev input parameters, however, it
is used before the check.
Initialize the udev variable after the sanity check to avoid a
possible NULL pointer dereference.
Fixes: 9614219e93 ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443763 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The function performs a check on its input parameters, however, the
hdev parameter is used before the check.
Initialize the stack variables after checking the input parameters to
avoid a possible NULL pointer dereference.
Fixes: 9614219e93 ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443804 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The function performs a check on the hdev input parameters, however, it
is used before the check.
Initialize the udev variable after the sanity check to avoid a
possible NULL pointer dereference.
Fixes: 9614219e93 ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443827 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The function performs a check on its input parameters, however, the
hdev parameter is used before the check.
Initialize the stack variables after checking the input parameters to
avoid a possible NULL pointer dereference.
Fixes: 9614219e93 ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443831 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This rework the handling of hci_inquiry_result_with_rssi_evt to not use
a union to represent the different inquiry responses.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The RPMh regulator driver is much newer and gets more attention, which in
consequence makes it do a few things better. Update qcom_smd-regulator's
probe function to mimic what rpmh-regulator does to address a couple of
issues:
- Probe defer now works correctly, before it used to, well,
kinda just die.. This fixes reliable probing on (at least) PM8994,
because Linux apparently cannot deal with supply map dependencies yet..
- Regulator data is now matched more sanely: regulator data is matched
against each individual regulator node name and throwing an -EINVAL if
data is missing, instead of just assuming everything is fine and
iterating over all subsequent array members.
- status = "disabled" will now work for disabling individual regulators in
DT. Previously it didn't seem to do much if anything at all.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20211230023442.1123424-1-konrad.dybcio@somainline.org
Signed-off-by: Mark Brown <broonie@kernel.org>
SMC connections might fail to be registered in a link group due to
unable to find a usable link during its creation. As a result,
smc_conn_create() will return a failure and most resources related
to the connection won't be applied or initialized, such as
conn->abort_work or conn->lnk.
If smc_conn_free() is invoked later, it will try to access the
uninitialized resources related to the connection, thus causing
a warning or crash.
This patch tries to fix this by resetting conn->lgr to NULL if an
abnormal exit occurs in smc_lgr_register_conn(), thus avoiding the
access to uninitialized resources in smc_conn_free().
Meanwhile, the new created link group should be terminated if smc
connections can't be registered in it. So smc_lgr_cleanup_early() is
modified to take care of link group only and invoked to terminate
unusable link group by smc_conn_create(). The call to smc_conn_free()
is moved out from smc_lgr_cleanup_early() to smc_conn_abort().
Fixes: 56bc3b2094 ("net/smc: assign link to a new connection")
Suggested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function devm_gpiod_get_index() return error pointers on error.
Thus devm_gpiod_get_index_optional() could return NULL and error pointers.
The same as devm_gpiod_get_optional() function. Using IS_ERR_OR_NULL()
check to catch error pointers.
Fixes: 77131dfe ("Bluetooth: hci_qca: Replace devm_gpiod_get() with devm_gpiod_get_optional()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
For the possible failure of the platform_get_irq(), the returned irq
could be error number and will finally cause the failure of the
request_irq().
Consider that platform_get_irq() can now in certain cases return
-EPROBE_DEFER, and the consequences of letting request_irq() effectively
convert that into -EINVAL, even at probe time rather than later on.
So it might be better to check just now.
Fixes: 0395ffc1ee ("Bluetooth: hci_bcm: Add PM for BCM devices")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
As the possible failure of the allocation, the devm_ioremap() may return
NULL pointer.
Take tgec_initialization() as an example.
If allocation fails, the params->base_addr will be NULL pointer and will
be assigned to tgec->regs in tgec_config().
Then it will cause the dereference of NULL pointer in set_mac_address(),
which is called by tgec_init().
Therefore, it should be better to add the sanity check after the calling
of the devm_ioremap().
Fixes: 3933961682 ("fsl/fman: Add FMan MAC driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Laurent reported that they have seen a significant amount of TCP retransmissions
at high throughput from applications residing in network namespaces talking to
the outside world via veths. The drops were seen on the qdisc layer (fq_codel,
as per systemd default) of the phys device such as ena or virtio_net due to all
traffic hitting a _single_ TX queue _despite_ multi-queue device. (Note that the
setup was _not_ using XDP on veths as the issue is generic.)
More specifically, after edbea92202 ("veth: Store queue_mapping independently
of XDP prog presence") which made it all the way back to v4.19.184+,
skb_record_rx_queue() would set skb->queue_mapping to 1 (given 1 RX and 1 TX
queue by default for veths) instead of leaving at 0.
This is eventually retained and callbacks like ena_select_queue() will also pick
single queue via netdev_core_pick_tx()'s ndo_select_queue() once all the traffic
is forwarded to that device via upper stack or other means. Similarly, for others
not implementing ndo_select_queue() if XPS is disabled, netdev_pick_tx() might
call into the skb_tx_hash() and check for prior skb_rx_queue_recorded() as well.
In general, it is a _bad_ idea for virtual devices like veth to mess around with
queue selection [by default]. Given dev->real_num_tx_queues is by default 1,
the skb->queue_mapping was left untouched, and so prior to edbea92202 the
netdev_core_pick_tx() could do its job upon __dev_queue_xmit() on the phys device.
Unbreak this and restore prior behavior by removing the skb_record_rx_queue()
from veth_xmit() altogether.
If the veth peer has an XDP program attached, then it would return the first RX
queue index in xdp_md->rx_queue_index (unless configured in non-default manner).
However, this is still better than breaking the generic case.
Fixes: edbea92202 ("veth: Store queue_mapping independently of XDP prog presence")
Fixes: 638264dc90 ("veth: Support per queue XDP ring")
Reported-by: Laurent Bernaille <laurent.bernaille@datadoghq.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Cc: Toshiaki Makita <toshiaki.makita1@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This code is holding the &ofdpa->flow_tbl_lock spinlock so it is not
allowed to sleep. That means we have to pass the OFDPA_OP_FLAG_NOWAIT
flag to ofdpa_flow_tbl_del().
Fixes: 936bd48656 ("rocker: use FIB notifications instead of switchdev calls")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When performing an I2C transfer where the last message was a write KASAN
would complain:
BUG: KASAN: slab-out-of-bounds in mpc_i2c_do_action+0x154/0x630
Read of size 2 at addr c814e310 by task swapper/2/0
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G B 5.16.0-rc8 #1
Call Trace:
[e5ee9d50] [c08418e8] dump_stack_lvl+0x4c/0x6c (unreliable)
[e5ee9d70] [c02f8a14] print_address_description.constprop.13+0x64/0x3b0
[e5ee9da0] [c02f9030] kasan_report+0x1f0/0x204
[e5ee9de0] [c0c76ee4] mpc_i2c_do_action+0x154/0x630
[e5ee9e30] [c0c782c4] mpc_i2c_isr+0x164/0x240
[e5ee9e60] [c00f3a04] __handle_irq_event_percpu+0xf4/0x3b0
[e5ee9ec0] [c00f3d40] handle_irq_event_percpu+0x80/0x110
[e5ee9f40] [c00f3e48] handle_irq_event+0x78/0xd0
[e5ee9f60] [c00fcfec] handle_fasteoi_irq+0x19c/0x370
[e5ee9fa0] [c00f1d84] generic_handle_irq+0x54/0x80
[e5ee9fc0] [c0006b54] __do_irq+0x64/0x200
[e5ee9ff0] [c0007958] __do_IRQ+0xe8/0x1c0
[c812dd50] [e3eaab20] 0xe3eaab20
[c812dd90] [c0007a4c] do_IRQ+0x1c/0x30
[c812dda0] [c0000c04] ExternalInput+0x144/0x160
--- interrupt: 500 at arch_cpu_idle+0x34/0x60
NIP: c000b684 LR: c000b684 CTR: c0019688
REGS: c812ddb0 TRAP: 0500 Tainted: G B (5.16.0-rc8)
MSR: 00029002 <CE,EE,ME> CR: 22000488 XER: 20000000
GPR00: c10ef7fc c812de90 c80ff200 c2394718 00000001 00000001 c10e3f90 00000003
GPR08: 00000000 c0019688 c2394718 fc7d625b 22000484 00000000 21e17000 c208228c
GPR16: e3e99284 00000000 ffffffff c2390000 c001bac0 c2082288 c812df60 c001ba60
GPR24: c23949c0 00000018 00080000 00000004 c80ff200 00000002 c2348ee4 c2394718
NIP [c000b684] arch_cpu_idle+0x34/0x60
LR [c000b684] arch_cpu_idle+0x34/0x60
--- interrupt: 500
[c812de90] [c10e3f90] rcu_eqs_enter.isra.60+0xc0/0x110 (unreliable)
[c812deb0] [c10ef7fc] default_idle_call+0xbc/0x230
[c812dee0] [c00af0e8] do_idle+0x1c8/0x200
[c812df10] [c00af3c0] cpu_startup_entry+0x20/0x30
[c812df20] [c001e010] start_secondary+0x5d0/0xba0
[c812dff0] [c00028a0] __secondary_start+0x90/0xdc
This happened because we would overrun the i2c->msgs array on the final
interrupt for the I2C STOP. This didn't happen if the last message was a
read because there is no interrupt in that case. Ensure that we only
access the current message if we are not processing a I2C STOP
condition.
Fixes: 1538d82f46 ("i2c: mpc: Interrupt driven transfer")
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add a new driver for the LetSketch / VSON WP9620N drawing tablet. This
drawing tablet is also sold under other brand names such as Case U,
presumably this driver will work for all of them. But it has only been
tested with a LetSketch WP9620N model.
These tablets also work without a special HID driver, but then only
part of the active area works and both the pad and stylus buttons are
hardwired to special key-combos. E.g. the 2 stylus buttons send right
mouse clicks / resp. "e" key presses.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2005575
BugLink: https://github.com/DIGImend/digimend-kernel-drivers/issues/528
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use the function key table introduced for the Magic Keyboard 2021
without fingerprint reader in the models with fingerprint reader and/or
numpad.
Tested with the ANSI variant of the keyboard with and without numpad.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
