After commit:7866a621043f ("dev: add per net_device packet type chains"),
we can not get packet types that are bound to a specified net device by
/proc/net/ptype, this patch fix the regression.
Run "tcpdump -i ens192 udp -nns0" Before and after apply this patch:
Before:
[root@localhost ~]# cat /proc/net/ptype
Type Device Function
0800 ip_rcv
0806 arp_rcv
86dd ipv6_rcv
After:
[root@localhost ~]# cat /proc/net/ptype
Type Device Function
ALL ens192 tpacket_rcv
0800 ip_rcv
0806 arp_rcv
86dd ipv6_rcv
v1 -> v2:
- fix the regression rather than adding new /proc API as
suggested by Stephen Hemminger.
Fixes: 7866a62104 ("dev: add per net_device packet type chains")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
bond_option_active_slave_get_rcu() should not be used in rtnl_mutex as it
use rcu_dereference(). Replace to rcu_dereference_rtnl() so we also can use
this function in rtnl protected context.
With this update, we can rmeove the rcu_read_lock/unlock in
bonding .ndo_eth_ioctl and .get_ts_info.
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Fixes: 94dd016ae5 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit ce0aa27ff3 ("sfp: add sfp-bus to bridge between network devices
and sfp cages") added code which finds SFP bus DT node even if the node
is disabled with status = "disabled". Because of this, when phylink is
created, it ends with non-null .sfp_bus member, even though the SFP
module is not probed (because the node is disabled).
We need to ignore disabled SFP bus node.
Fixes: ce0aa27ff3 ("sfp: add sfp-bus to bridge between network devices and sfp cages")
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org # 2203cbf2c8 ("net: sfp: move fwnode parsing into sfp-bus layer")
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported:
[ 256.104522] ======================================================
[ 256.113783] WARNING: possible circular locking dependency detected
[ 256.120093] 5.16.0-rc6-yocto-standard+ #99 Not tainted
[ 256.125362] ------------------------------------------------------
[ 256.131673] intel-speed-sel/844 is trying to acquire lock:
[ 256.137290] ffffffffc036f0d0 (punit_misc_dev_lock){+.+.}-{3:3}, at: isst_if_open+0x18/0x90 [isst_if_common]
[ 256.147171]
[ 256.147171] but task is already holding lock:
[ 256.153135] ffffffff8ee7cb50 (misc_mtx){+.+.}-{3:3}, at: misc_open+0x2a/0x170
[ 256.160407]
[ 256.160407] which lock already depends on the new lock.
[ 256.160407]
[ 256.168712]
[ 256.168712] the existing dependency chain (in reverse order) is:
[ 256.176327]
[ 256.176327] -> #1 (misc_mtx){+.+.}-{3:3}:
[ 256.181946] lock_acquire+0x1e6/0x330
[ 256.186265] __mutex_lock+0x9b/0x9b0
[ 256.190497] mutex_lock_nested+0x1b/0x20
[ 256.195075] misc_register+0x32/0x1a0
[ 256.199390] isst_if_cdev_register+0x65/0x180 [isst_if_common]
[ 256.205878] isst_if_probe+0x144/0x16e [isst_if_mmio]
...
[ 256.241976]
[ 256.241976] -> #0 (punit_misc_dev_lock){+.+.}-{3:3}:
[ 256.248552] validate_chain+0xbc6/0x1750
[ 256.253131] __lock_acquire+0x88c/0xc10
[ 256.257618] lock_acquire+0x1e6/0x330
[ 256.261933] __mutex_lock+0x9b/0x9b0
[ 256.266165] mutex_lock_nested+0x1b/0x20
[ 256.270739] isst_if_open+0x18/0x90 [isst_if_common]
[ 256.276356] misc_open+0x100/0x170
[ 256.280409] chrdev_open+0xa5/0x1e0
...
The call sequence suggested that misc_device /dev file can be opened
before misc device is yet to be registered, which is done only once.
Here punit_misc_dev_lock was used as common lock, to protect the
registration by multiple ISST HW drivers, one time setup, prevent
duplicate registry of misc device and prevent load/unload when device
is open.
We can split into locks:
- One which just prevent duplicate call to misc_register() and one
time setup. Also never call again if the misc_register() failed or
required one time setup is failed. This lock is not shared with
any misc device callbacks.
- The other lock protects registry, load and unload of HW drivers.
Sequence in isst_if_cdev_register()
- Register callbacks under punit_misc_dev_open_lock
- Call isst_misc_reg() which registers misc_device on the first
registry which is under punit_misc_dev_reg_lock, which is not
shared with callbacks.
Sequence in isst_if_cdev_unregister
Just opposite of isst_if_cdev_register
Reported-and-tested-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220112022521.54669-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The driver as originally submitted accidentally relied on Android having
run before and Android having unmasked the 2nd level IRQ-mask for the
charger IRQ. This worked since these are PMIC registers which are only
reset when the battery is fully drained or disconnected.
Fix the charger IRQ no longer working after loss of battery power by
properly setting the 2nd level IRQ-mask for the charger IRQ.
Note this removes the need to enable/disable our parent IRQ which just
sets the mask bit in the 1st level IRQ-mask register, setting one of
the 2 level masks is enough to stop the IRQ from getting reported.
Fixes: 761db353d9 ("platform/x86: Add intel_crystal_cove_charger driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220111232309.377642-1-hdegoede@redhat.com
Some ThinkPad models, like the X1 Tablet 1st and 2nd Gen, are passively
cooled without any fan. Currently, an entry in /proc/acpi/ibm/fan is
nevertheless created, and misleadingly shows
status: enabled
speed: 65535
level: auto
This patch adds a TPACPI_FAN_NOFAN quirk definition and corresponding
handling to not initialize a fan interface at all.
For the time being, the quirk is only applied for X1 Tablet 2nd Gen
(types 20JB, 20JC; EC N1O...); further models (such as Gen1, types 20GG
and 20GH) can be added easily once tested.
Tested on a 20JCS00C00, BIOS N1OET58W (1.43), EC N1OHT34W.
Signed-off-by: Alexander Kobel <a-kobel@a-kobel.de>
Link: https://lore.kernel.org/r/12d4b825-a2b9-8cb7-6ed3-db4d66f46a60@a-kobel.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Microsoft Surface platform-specific devices are only present on
Microsoft Surface platforms, which are currently limited to arm64 and
x86. Hence add a dependency on ARM64 || X86, to prevent asking the user
about drivers for these devices when configuring a kernel for an
architecture that does not support Microsoft Surface platforms.
Fixes: 2724799281 ("platform: surface: Propagate ACPI Dependency")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220115140849.269479-1-geert@linux-m68k.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add an init() callback to struct x86_dev_info, board descriptions can use
this to do some custom setup before registering the i2c_clients, platform-
devices and servdevs.
Also add an exit() callback to also allow for cleanup of the custom setup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-By: Lubomir Rintel <lkundrak@V3.sk>
Link: https://lore.kernel.org/r/20220110103952.48760-2-hdegoede@redhat.com
Some of the broken DSDTs on these devices often also include broken / wrong
_AEI (ACPI Event Interrupt) handlers, which can cause e.g. interrupt storms
by listening to a floating GPIO pin.
Add support for disabling these and disable them on the Asus ME176C and
TF103C tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-By: Lubomir Rintel <lkundrak@V3.sk>
Link: https://lore.kernel.org/r/20220110103952.48760-1-hdegoede@redhat.com
Injecting an exception into a guest with non-VHE is risky business.
Instead of writing in the shadow register for the switch code to
restore it, we override the CPU register instead. Which gets
overriden a few instructions later by said restore code.
The result is that although the guest correctly gets the exception,
it will return to the original context in some random state,
depending on what was there the first place... Boo.
Fix the issue by writing to the shadow register. The original code
is absolutely fine on VHE, as the state is already loaded, and writing
to the shadow register in that case would actually be a bug.
Fixes: bb666c472c ("KVM: arm64: Inject AArch64 exceptions from HYP")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20220121184207.423426-1-maz@kernel.org
Include the gpio-sim.rst file in the GPIO index (toc/table of contents).
Quietens this doc build warning:
Documentation/admin-guide/gpio/gpio-sim.rst: WARNING: document isn't included in any toctree
Fixes: b48f6b466e44 ("gpio: sim: new testing module")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
If the user-space sets the chip label to an empty string - we should
check the length and not override the default name or else line hogs
will not be properly attached.
Fixes: cb8c474e79 ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
If the size of the PLT entries generated by apply_rela() exceeds
64KiB, the first ones can no longer reach __jump_r1 with brc. Fix by
using brcl. An alternative solution is to add a __jump_r1 copy after
every 64KiB, however, the space savings are quite small and do not
justify the additional complexity.
Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches")
Cc: stable@vger.kernel.org
Reported-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The "val" variable is controlled by the user and comes from
hwmon_attr_store(). The FAN_RPM_TO_PERIOD() macro divides by "val"
so a zero will crash the system. Check for that and return -EINVAL.
Negatives are also invalid so return -EINVAL for those too.
Fixes: fc958a61ff ("hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
If CONFIG_PM is not enabled, the following warning is reported.
drivers/hwmon/pmbus/ir38064.c:54:34: warning:
unused variable 'ir38064_of_match'
Mark it as __maybe_unused.
Reported-by: kernel test robot <lkp@intel.com>
Cc: Arthur Heymans <arthur.heymans@9elements.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
sysfs and udev notifications need to be sent to the _alarm
attributes, not to the value attributes.
Fixes: 94dbd23ed8 ("hwmon: (lm90) Use hwmon_notify_event()")
Cc: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Experiments with MAX6646 and MAX6648 show that the alert function of those
chips is broken, similar to other chips supported by the lm90 driver.
Mark it accordingly.
Fixes: 4667bcb8d8 ("hwmon: (lm90) Introduce chip parameter structure")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Experiments with MAX6680 and MAX6681 show that the alert function of those
chips is broken, similar to other chips supported by the lm90 driver.
Mark it accordingly.
Fixes: 4667bcb8d8 ("hwmon: (lm90) Introduce chip parameter structure")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Experiments with MAX6654 show that its alert function is broken,
similar to other chips supported by the lm90 driver. Mark it accordingly.
Fixes: 229d495d81 ("hwmon: (lm90) Add max6654 support to lm90 driver")
Cc: Josh Lehan <krellan@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
If alert handling is broken, interrupts are disabled after an alert and
re-enabled after the alert clears. However, if there is an interrupt
handler, this does not apply if alerts were originally disabled and enabled
when the driver was loaded. In that case, interrupts will stay disabled
after an alert was handled though the alert handler even after the alert
condition clears. Address the situation by always re-enabling interrupts
after the alert condition clears if there is an interrupt handler.
Fixes: 2abdc357c5 ("hwmon: (lm90) Unmask hardware interrupt")
Cc: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
According to its datasheet, G781 supports a maximum conversion rate value
of 8 (62.5 ms). However, chips labeled G781 and G780 were found to only
support a maximum conversion rate value of 7 (125 ms). On the other side,
chips labeled G781-1 and G784 were found to support a conversion rate value
of 8. There is no known means to distinguish G780 from G781 or G784; all
chips report the same manufacturer ID and chip revision.
Setting the conversion rate register value to 8 on chips not supporting
it causes unexpected behavior since the real conversion rate is set to 0
(16 seconds) if a value of 8 is written into the conversion rate register.
Limit the conversion rate register value to 7 for all G78x chips to avoid
the problem.
Fixes: ae544f64cc ("hwmon: (lm90) Add support for GMT G781")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Two bugs have sneaked in the H616 pinctrl data:
- PH9 uses the mux value of 0x3 twice (one should be 0x5 instead)
- PH8 and PH9 use the "i2s3" function name twice in each pin
For the double pin name we use the same trick we pulled for i2s0: append
the pin function to the group name to designate the special function.
Fixes: 25adc29407 ("pinctrl: sunxi: Add support for the Allwinner H616 pin controller")
Reported-by: SASANO Takayoshi <uaa@mx5.nisiq.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220105172952.23347-1-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit bdfbef2d29 ("pinctrl: cherryview: Don't use selection 0 to mark
an interrupt line as unused") made the code properly differentiate
between unset vs (hwirq) 0 entries in the GPIO-controller interrupt-line
to GPIO pinnumber/hwirq mapping.
This is causing some boards to not boot. This commit restores the old
behavior of triggering hwirq 0 when receiving an interrupt on an
interrupt-line for which there is no mapping.
Fixes: bdfbef2d29 ("pinctrl: cherryview: Don't use selection 0 to mark an interrupt line as unused")
Reported-and-tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20220104164238.253142-1-hdegoede@redhat.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Make the outer loop iterate over functions as that's the real subject.
This simplifies code (and reduces amount of lines of code) as allocating
memory for names doesn't require extra checks anymore.
While at it use local "group_names" variable. It fixes:
drivers/pinctrl/pinctrl-thunderbay.c: In function 'thunderbay_add_functions':
drivers/pinctrl/pinctrl-thunderbay.c:815:8: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
815 | grp = func->group_names;
| ^
Ref: c26c4bfc10 ("pinctrl: keembay: rework loops looking for groups names")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20220111172919.6567-2-zajec5@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit adae1e931a ("Drivers: hv: vmbus: Copy packets sent by Hyper-V
out of the ring buffer") introduced a notion of maximum packet size in
vmbus channel and used that size to initialize a buffer holding all
incoming packet along with their vmbus packet header. hv_balloon uses
the default maximum packet size VMBUS_DEFAULT_MAX_PKT_SIZE which matches
its maximum message size, however vmbus_open expects this size to also
include vmbus packet header. This leads to 4096 bytes
dm_unballoon_request messages being truncated to 4080 bytes. When the
driver tries to read next packet it starts from a wrong read_index,
receives garbage and prints a lot of "Unhandled message: type:
<garbage>" in dmesg.
Allocate the buffer with HV_HYP_PAGE_SIZE more bytes to make room for
the header.
Fixes: adae1e931a ("Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer")
Suggested-by: Michael Kelley (LINUX) <mikelley@microsoft.com>
Suggested-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Yanming Liu <yanminglr@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20220119202052.3006981-1-yanminglr@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Changes to the AMD Thresholding sysfs code prevents sysfs writes from
updating the underlying registers once CPU init is completed, i.e.
"threshold_banks" is set.
Allow the registers to be updated if the thresholding interface is
already initialized or if in the init path. Use the "set_lvt_off" value
to indicate if running in the init path, since this value is only set
during init.
Fixes: a037f3ca0e ("x86/mce/amd: Make threshold bank setting hotplug robust")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220117161328.19148-1-yazen.ghannam@amd.com
kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Fix this issue by adding kobject_put().
Callback function blk_ia_ranges_sysfs_release() in kobject_put()
can handle the pointer "iars" properly.
Fixes: a2247f19ee ("block: Add independent access ranges support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220120101025.22411-1-linmq006@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In some cases io_rsrc_ref_quiesce will call io_rsrc_node_switch_start,
and then immediately flush the delayed work queue &ctx->rsrc_put_work.
However the percpu_ref_put does not immediately destroy the node, it
will be called asynchronously via RCU. That ends up with
io_rsrc_node_ref_zero only being called after rsrc_put_work has been
flushed, and so the process ends up sleeping for 1 second unnecessarily.
This patch executes the put code immediately if we are busy
quiescing.
Fixes: 4a38aed2a0 ("io_uring: batch reap of dead file registrations")
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220121123856.3557884-1-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull powerpc fixes from Michael Ellerman:
- A series of bpf fixes, including an oops fix and some codegen fixes.
- Fix a regression in syscall_get_arch() for compat processes.
- Fix boot failure on some 32-bit systems with KASAN enabled.
- A couple of other build/minor fixes.
Thanks to Athira Rajeev, Christophe Leroy, Dmitry V. Levin, Jiri Olsa,
Johan Almbladh, Maxime Bizon, Naveen N. Rao, and Nicholas Piggin.
* tag 'powerpc-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Mask SRR0 before checking against the masked NIP
powerpc/perf: Only define power_pmu_wants_prompt_pmi() for CONFIG_PPC64
powerpc/32s: Fix kasan_init_region() for KASAN
powerpc/time: Fix build failure due to do_hard_irq_enable() on PPC32
powerpc/audit: Fix syscall_get_arch()
powerpc64/bpf: Limit 'ldbrx' to processors compliant with ISA v2.06
tools/bpf: Rename 'struct event' to avoid naming conflict
powerpc/bpf: Update ldimm64 instructions during extra pass
powerpc32/bpf: Fix codegen for bpf-to-bpf calls
bpf: Guard against accessing NULL pt_regs in bpf_get_task_stack()
Pull irq fix from Borislav Petkov:
"A single use-after-free fix in the PCI MSI irq domain allocation path"
* tag 'irq_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Prevent UAF in error path
Pull scheduler fixes from Borislav Petkov:
"A bunch of fixes: forced idle time accounting, utilization values
propagation in the sched hierarchies and other minor cleanups and
improvements"
* tag 'sched_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kernel/sched: Remove dl_boosted flag comment
sched: Avoid double preemption in __cond_resched_*lock*()
sched/fair: Fix all kernel-doc warnings
sched/core: Accounting forceidle time for all tasks except idle task
sched/pelt: Relax the sync of load_sum with load_avg
sched/pelt: Relax the sync of runnable_sum with runnable_avg
sched/pelt: Continue to relax the sync of util_sum with util_avg
sched/pelt: Relax the sync of util_sum with util_avg
psi: Fix uaf issue when psi trigger is destroyed while being polled
Pull perf fixes from Borislav Petkov:
- Add support for accessing the general purpose counters on Alder Lake
via MMIO
- Add new LBR format v7 support which is v5 modulo TSX
- Fix counter enumeration on Alder Lake hybrids
- Overhaul how context time updates are done and get rid of
perf_event::shadow_ctx_time.
- The usual amount of fixes: event mask correction, supported event
types reporting, etc.
* tag 'perf_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/perf: Avoid warning for Arch LBR without XSAVE
perf/x86/intel/uncore: Add IMC uncore support for ADL
perf/x86/intel/lbr: Add static_branch for LBR INFO flags
perf/x86/intel/lbr: Support LBR format V7
perf/x86/rapl: fix AMD event handling
perf/x86/intel/uncore: Fix CAS_COUNT_WRITE issue for ICX
perf/x86/intel: Add a quirk for the calculation of the number of counters on Alder Lake
perf: Fix perf_event_read_local() time
msft_find_handle_data returns NULL if it can't find the handle.
Therefore, handle_data must be checked, otherwise a null pointer
is dereferenced.
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Aditya reports [0] that his recent MacbookPro crashes in the firmware
when using the variable services at runtime. The culprit appears to be a
call to QueryVariableInfo(), which we did not use to call on Apple x86
machines in the past as they only upgraded from EFI v1.10 to EFI v2.40
firmware fairly recently, and QueryVariableInfo() (along with
UpdateCapsule() et al) was added in EFI v2.00.
The only runtime service introduced in EFI v2.00 that we actually use in
Linux is QueryVariableInfo(), as the capsule based ones are optional,
generally not used at runtime (all the LVFS/fwupd firmware update
infrastructure uses helper EFI programs that invoke capsule update at
boot time, not runtime), and not implemented by Apple machines in the
first place. QueryVariableInfo() is used to 'safely' set variables,
i.e., only when there is enough space. This prevents machines with buggy
firmwares from corrupting their NVRAMs when they run out of space.
Given that Apple machines have been using EFI v1.10 services only for
the longest time (the EFI v2.0 spec was released in 2006, and Linux
support for the newly introduced runtime services was added in 2011, but
the MacbookPro12,1 released in 2015 still claims to be EFI v1.10 only),
let's avoid the EFI v2.0 ones on all Apple x86 machines.
[0] https://lore.kernel.org/all/6D757C75-65B1-468B-842D-10410081A8E4@live.com/
Cc: <stable@vger.kernel.org>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: Aditya Garg <gargaditya08@live.com>
Tested-by: Orlando Chamberlain <redecorating@protonmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Aditya Garg <gargaditya08@live.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215277
The kernel is aligned at SEGMENT_SIZE and this is the size populated in the PE
headers:
arch/arm64/kernel/efi-header.S: .long SEGMENT_ALIGN // SectionAlignment
EFI_KIMG_ALIGN is defined as: (SEGMENT_ALIGN > THREAD_ALIGN ? SEGMENT_ALIGN :
THREAD_ALIGN)
So it depends on THREAD_ALIGN. On newer builds this message started to appear
even though the loader is taking into account the PE header (which is stating
SEGMENT_ALIGN).
Fixes: c32ac11da3 ("efi/libstub: arm64: Double check image alignment at entry")
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Compiling with e.g MARCH=z900 results in compile errors:
arch/s390/lib/uaccess.c: In function 'copy_from_user_mvcos':
>> arch/s390/lib/uaccess.c:65:15: error: variable 'spec' has initializer but incomplete type
65 | union oac spec = {
Therefore make definition of union oac visible for all MARCHs.
Reported-by: kernel test robot <lkp@intel.com>
Cc: Nico Boehr <nrb@linux.ibm.com>
Cc: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Fixes: 012a224e1f ("s390/uaccess: introduce bit field for OAC specifier")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The machine check validity bit tells about the context. If a KVM guest
was running the bit tells about the guest validity and the host state is
not affected. As a guest can disable the guest validity this might
result in unwanted host errors on machine checks.
Cc: stable@vger.kernel.org
Fixes: c929500d7a ("s390/nmi: s390: New low level handling for machine check happening in guest")
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
