When cross-building tools with clang, we run `which $(CROSS_COMPILE)gcc`
to detect whether a GCC toolchain provides the standard libraries. It is
only a helper because some distros put libraries where LLVM does not
automatically find them. On other systems, LLVM detects the libc
automatically and does not need this. There, it is completely fine not
to have a GCC at all, but some versions of `which' display an error when
the command is not found:
which: no aarch64-linux-gnu-gcc in ($PATH)
Since the error can safely be ignored, throw it to /dev/null.
Fixes: cebdb73745 ("tools: Help cross-building with clang")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/bpf/20220201093119.1713207-1-jean-philippe@linaro.org
Pull spi fixes from Mark Brown:
"There are quite a few fixes that have accumilated since the merge
window here, all driver specific and none super urgent, plus a new
device ID for the Rockchip driver"
* tag 'spi-fix-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: mediatek: Avoid NULL pointer crash in interrupt
spi: dt-bindings: Fix 'reg' child node schema
spi: bcm-qspi: check for valid cs before applying chip select
spi: uniphier: fix reference count leak in uniphier_spi_probe()
spi: meson-spicc: add IRQ check in meson_spicc_probe
spi: uniphier: Fix a bug that doesn't point to private data correctly
spi: change clk_disable_unprepare to clk_unprepare
spi: spi-rockchip: Add rk3568-spi compatible
spi: stm32: make SPI_MASTER_MUST_TX flags only specific to STM32F4
spi: stm32: remove inexistant variables in struct stm32_spi_cfg comment
spi: stm32-qspi: Update spi registering
Pull regulator fixes from Mark Brown:
"A couple of very minor fixes for the regulator framework, nothing at
all urgent here"
* tag 'regulator-fix-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: MAX20086: add gpio/consumer.h
regulator: max20086: fix error code in max20086_parse_regulators_dt()
Pull x86 platform driver fixes from Hans de Goede:
"This consists of various build- and bug-fixes as well as a few
hardware-id additions.
Highlights:
- Bunch of fixes for the new x86-android-tablets module
- Misc other fixes
- A couple of hw-id additions"
* tag 'platform-drivers-x86-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix incorrect use of platform profile on AMD platforms
platform/x86: amd-pmc: Correct usage of SMU version
platform/x86: asus-tf103c-dock: Make 2 global structs static
platform/x86: amd-pmc: Make amd_pmc_stb_debugfs_fops static
platform/x86: ISST: Fix possible circular locking dependency detected
platform/x86: intel_crystal_cove_charger: Fix IRQ masking / unmasking
platform/x86: thinkpad_acpi: Add quirk for ThinkPads without a fan
platform/x86: touchscreen_dmi: Add info for the RWC NANOTE P8 AY07J 2-in-1
platform/surface: Reinstate platform dependency
platform/x86: x86-android-tablets: Trivial typo fix for MODULE_AUTHOR
platform/x86: x86-android-tablets: Fix the buttons on CZC P10T tablet
platform/x86: x86-android-tablets: Constify the gpiod_lookup_tables arrays
platform/x86: x86-android-tablets: Add an init() callback to struct x86_dev_info
platform/x86: x86-android-tablets: Add support for disabling ACPI _AEI handlers
platform/x86: x86-android-tablets: Correct crystal_cove_charger module name
Pull overlayfs fixes from Miklos Szeredi:
"Fix a regression introduced in v5.15, affecting copy up of files with
'noatime' or 'sync' attributes to a tmpfs upper layer"
* tag 'ovl-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: don't fail copy up if no fileattr support on upper
ovl: fix NULL pointer dereference in copy up warning
Pull unicode cleanup from Gabriel Krisman Bertazi:
"A fix from Christoph Hellwig merging the CONFIG_UNICODE_UTF8_DATA into
the previous CONFIG_UNICODE. It is -rc material since we don't want to
expose the former symbol on 5.17.
This has been living on linux-next for the past week"
* tag 'unicode-for-next-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: clean up the Kconfig symbol confusion
Pull audit fix from Paul Moore:
"A single audit patch to fix problems relating to audit queuing and
system responsiveness when "audit=1" is specified on the kernel
command line and the audit daemon is SIGSTOP'd for an extended period
of time"
* tag 'audit-pr-20220131' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: improve audit queue handling when "audit=1" on cmdline
The cgroup release_agent is called with call_usermodehelper. The function
call_usermodehelper starts the release_agent with a full set fo capabilities.
Therefore require capabilities when setting the release_agaent.
Reported-by: Tabitha Sable <tabitha.c.sable@gmail.com>
Tested-by: Tabitha Sable <tabitha.c.sable@gmail.com>
Fixes: 81a6a5cdd2 ("Task Control Groups: automatic userspace notification of idle cgroups")
Cc: stable@vger.kernel.org # v2.6.24+
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Handshake with CSME/AMT on none provisioned platforms during S0ix flow
is not supported on TGL platform and can cause to HW unit hang. Update
the handshake with CSME flow to start from the ADL platform.
Fixes: 3e55d23171 ("e1000e: Add handshake with the CSME to support S0ix")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Lenovo AMD based platforms have been offering platform_profiles but they
are not working correctly. This is because the mode we are using on the
Intel platforms (MMC) is not available on the AMD platforms.
This commit adds checking of the functional capabilities returned by the
BIOS to confirm if MMC is supported or not. Profiles will not be
available if the platform is not MMC capable.
I'm investigating and working on an alternative for AMD platforms but
that is still work-in-progress.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220127190358.4078-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Horatiu Vultur says:
====================
net: lan966x: Add PTP Hardward Clock support
Add support for PTP Hardware Clock (PHC) for lan966x. The switch supports
both PTP 1-step and 2-step modes.
v1->v2:
- fix commit messages
- reduce the scope of the lock ptp_lock inside the function
lan966x_ptp_hwtstamp_set
- the rx timestamping is always enabled for all packages
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the function get_ts_info in ethtool_ops which is needed to get
the HW capabilities for timestamping.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When doing 2-step timestamping the HW will generate an interrupt when it
managed to timestamp a frame. It is the SW responsibility to read it
from the FIFO.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update both the extraction and injection to do timestamping of the
frames. The extraction is always doing the timestamping while for
injection is doing the timestamping only if it is configured.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the ioctl callbacks SIOCSHWTSTAMP and SIOCGHWTSTAMP to allow
to configure the ports to enable/disable timestamping for TX. The RX
timestamping is always enabled. The HW is capable to run both 1-step
timestamping and 2-step timestamping.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend dt-bindings for lan966x with ptp interrupt. This is generated
when doing 2-step timestamping and the timestamp can be read from the
FIFO.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Run sysctl in quiet mode. Echoing the modified sysctl doesn't bring any
useful information.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All callers of fib_rule6_test_match_n_redirect() and
fib_rule4_test_match_n_redirect() pass a third argument containing a
description of the test being run. Instead of ignoring this argument,
let's use it for logging instead of printing a truncated version of the
command.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fib_rule6_del_by_pref() and fib_rule4_del_by_pref() functions use
an uninitialised $TABLE variable. They should use $RTABLE instead.
This doesn't alter the result of the test, as it just makes the grep
command less specific (but since the script always uses the same table
number, that doesn't really matter).
Let's fix it anyway and, while there, specify the filtering parameters
directly in 'ip -X rule show' to avoid the extra grep command entirely.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let's restrict the scope of these variables to avoid possible
interferences.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-queue
Tony Nguyen says:
====================
10GbE Intel Wired LAN Driver Updates 2022-01-31
Alexander Lobakin says:
This is an interpolation of [0] to other Intel Ethernet drivers
(and is (re)based on its code).
The main aim is to keep XDP metadata not only in case with
build_skb(), but also when we do napi_alloc_skb() + memcpy().
All Intel drivers suffers from the same here:
- metadata gets lost on XDP_PASS in legacy-rx;
- excessive headroom allocation on XSK Rx to skbs;
- metadata gets lost on XSK Rx to skbs.
Those get especially actual in XDP Hints upcoming.
I couldn't have addressed the first one for all Intel drivers due to
that they don't reserve any headroom for now in legacy-rx mode even
with XDP enabled. This is hugely wrong, but requires quite a bunch
of work and a separate series. Luckily, ice doesn't suffer from
that.
igc has 1 and 3 already fixed in [0].
[0] https://lore.kernel.org/netdev/163700856423.565980.10162564921347693758.stgit@firesoul
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A typo in qca808x_read_status means we try to set SMII mode on the port
rather than SGMII when the link speed is not 2.5Gb/s. This results in no
traffic due to the mismatch in configuration between the phy and the
mac.
v2:
Only change interface mode when the link is up
Fixes: 79c7bc0521 ("net: phy: add qca8081 read_status")
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This code calls fd_install() which gives the userspace access to the fd.
Then if copy_info_records_to_user() fails it calls put_unused_fd(fd) but
that will not release it and leads to a stale entry in the file
descriptor table.
Generally you can't trust the fd after a call to fd_install(). The fix
is to delay the fd_install() until everything else has succeeded.
Fortunately it requires CAP_SYS_ADMIN to reach this code so the security
impact is less.
Fixes: f644bc449b ("fanotify: fix copy_event_to_user() fid error clean up")
Link: https://lore.kernel.org/r/20220128195656.GA26981@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Jan Kara <jack@suse.cz>
btf_ext__{func,line}_info_rec_size functions are used in conjunction
with already-deprecated btf_ext__reloc_{func,line}_info functions. Since
struct btf_ext is opaque to the user it was necessary to expose rec_size
getters in the past.
btf_ext__reloc_{func,line}_info were deprecated in commit 8505e8709b
("libbpf: Implement generalized .BTF.ext func/line info adjustment")
as they're not compatible with support for multiple programs per
section. It was decided[0] that users of these APIs should implement their
own .btf.ext parsing to access this data, in which case the rec_size
getters are unnecessary. So deprecate them from libbpf 0.7.0 onwards.
[0] Closes: https://github.com/libbpf/libbpf/issues/277
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220201014610.3522985-1-davemarchevsky@fb.com
Fix all kernel-doc warnings in mips/kvm/vz.c as reported by the
kernel test robot:
arch/mips/kvm/vz.c:471: warning: Function parameter or member 'out_compare' not described in '_kvm_vz_save_htimer'
arch/mips/kvm/vz.c:471: warning: Function parameter or member 'out_cause' not described in '_kvm_vz_save_htimer'
arch/mips/kvm/vz.c:471: warning: Excess function parameter 'compare' description in '_kvm_vz_save_htimer'
arch/mips/kvm/vz.c:471: warning: Excess function parameter 'cause' description in '_kvm_vz_save_htimer'
arch/mips/kvm/vz.c:1551: warning: No description found for return value of 'kvm_trap_vz_handle_cop_unusable'
arch/mips/kvm/vz.c:1552: warning: expecting prototype for kvm_trap_vz_handle_cop_unusuable(). Prototype was for kvm_trap_vz_handle_cop_unusable() instead
arch/mips/kvm/vz.c:1597: warning: No description found for return value of 'kvm_trap_vz_handle_msa_disabled'
Fixes: c992a4f6a9 ("KVM: MIPS: Implement VZ support")
Fixes: f4474d50c7 ("KVM: MIPS/VZ: Support hardware guest timer")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: kvm@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
By profiling, discovered that ena device driver allocates skb by
build_skb() and frees by napi_skb_cache_put(). Because the driver
does not use napi skb cache in allocation path, napi skb cache is
periodically filled and flushed. This is waste of napi skb cache.
As ena_alloc_skb() is called only in napi, Use napi_build_skb()
and napi_alloc_skb() when allocating skb.
This patch was tested on aws a1.metal instance.
[ jwiedmann.dev@gmail.com: Use napi_alloc_skb() instead of
netdev_alloc_skb_ip_align() to keep things consistent. ]
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/YfUAkA9BhyOJRT4B@ip-172-31-19-208.ap-northeast-1.compute.internal
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current macsec netdev notify handler handles NETDEV_UNREGISTER event by
releasing relevant SW resources only, this causes resources leak in case
of macsec HW offload, as the underlay driver was not notified to clean
it's macsec offload resources.
Fix by calling the underlay driver to clean it's relevant resources
by moving offload handling from macsec_dellink() to macsec_common_dellink()
when handling NETDEV_UNREGISTER event.
Fixes: 3cf3227a21 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change qed_mcp_cmd() to use msleep() (by setting QED_MB_FLAG_CAN_SLEEP
flag) and add new nosleep() version of the api. These api are used to
issue cmds to management fw and the change affects how driver
behaves while waiting for a response/resource.
All sleepable callers of the existing api now use msleep() version. For
non-sleepable callers, the new nosleep() version is explicitly used.
Signed-off-by: Venkata Sudheer Kumar Bhavaraju <vbhavaraju@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220131005235.1647881-1-vbhavaraju@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are
located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump
gmac4 DMA registers correctly, this commit checks if a net_device has
gmac4 and uses different logic to dump its DMA registers.
This fixes the following KASAN warning, which can normally be triggered
by a command similar like "ethtool -d eth0":
BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30
Write of size 4 at addr ffffffc010177100 by task ethtool/1839
kasan_report+0x200/0x21c
__asan_report_store4_noabort+0x34/0x60
dwmac4_dump_dma_regs+0x6d4/0xb30
stmmac_ethtool_gregs+0x110/0x204
ethtool_get_regs+0x200/0x4b0
dev_ethtool+0x1dac/0x3800
dev_ioctl+0x7c0/0xb50
sock_ioctl+0x298/0x6c4
...
Fixes: fbf68229ff ("net: stmmac: unify registers dumps methods")
Signed-off-by: Camel Guo <camelg@axis.com>
Link: https://lore.kernel.org/r/20220131083841.3346801-1-camel.guo@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the crash in kernel while dereferencing the NULL pointer,
when the driver is unloaded and simultaneously the VSI rings
are being stopped.
The hardware requires 50msec in order to finish RX queues
disable. For this purpose the driver spins in mdelay function
for the operation to be completed.
For example changing number of queues which requires reset would
fail in the following call stack:
1) i40e_prep_for_reset
2) i40e_pf_quiesce_all_vsi
3) i40e_quiesce_vsi
4) i40e_vsi_close
5) i40e_down
6) i40e_vsi_stop_rings
7) i40e_vsi_control_rx -> disable requires the delay of 50msecs
8) continue back in i40e_down function where
i40e_clean_tx_ring(vsi->tx_rings[i]) is going to crash
When the driver was spinning vsi_release called
i40e_vsi_free_arrays where the vsi->tx_rings resources
were freed and the pointer was set to NULL.
Fixes: 5b6d4a7f20 ("i40e: Fix crash during removing i40e driver")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There was an AQ error I40E_AQ_RC_EINVAL when trying
to reset bw limit as part of bw allocation setup.
This was caused by trying to reset bw limit with
DCB enabled. Bw limit should not be reset when
DCB is enabled. The code was relying on the pf->flags
to check if DCB is enabled but if only 1 TC is available
this flag will not be set even though DCB is enabled.
Add a check for number of TC and if it is 1
don't try to reset bw limit even if pf->flags shows
DCB as disabled.
Fixes: fa38e30ac7 ("i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled")
Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> # Flatten the condition
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
