Adding ble multiplication to GF128mul, and fixing up comments.
The ble multiplication functions multiply GF(2^128) elements in the
ble format. This format is preferable because the bits within each
byte map to polynomial coefficients in the natural order (lowest order
bit = coefficient of lowest degree polynomial term), and the bytes are
stored in little endian order which matches the endianness of most
modern CPUs.
These new functions will be used by the HEH algorithm.
Signed-off-by: Alex Cope <alexcope@google.com>
Bug: 32975945
Signed-off-by: Eric Biggers <ebiggers@google.com>
Change-Id: I39a58e8ee83e6f9b2e6bd51738f816dbfa2f3a47
Rename and clean up the GF(2^128) overflow macros and tables. Their
usage is more general than the name suggested, e.g. what was previously
known as the "bbe" table can actually be used for both "bbe" and "ble"
multiplication.
Bug: 32975945
Signed-off-by: Eric Biggers <ebiggers@google.com>
Change-Id: Ie6c47b4075ca40031eb1767e9b468cfd7bf1b2e4
GF(2^128) multiplication tables are typically used for secret
information, so it's a good idea to zero them on free.
Signed-off-by: Alex Cope <alexcope@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry-picked from 75aa0a7caf)
Bug: 32975945
Signed-off-by: Eric Biggers <ebiggers@google.com>
Change-Id: I37b1ae9544158007f9ee2caf070120f4a42153ab
Analogous to crypto_grab_skcipher() and crypto_spawn_skcipher_alg(),
these are useful for algorithms that need to use a shash sub-algorithm,
possibly in addition to other sub-algorithms.
Bug: 32975945
Signed-off-by: Eric Biggers <ebiggers@google.com>
Change-Id: I44e5a519d73f5f839e3b6ecbf8c66e36ec569557
Add a function blkcipher_ablkcipher_walk_virt() which allows ablkcipher
algorithms to use the blkcipher_walk API to walk over their data. This
will be used by the HEH algorithm, which to support asynchronous ECB
algorithms will be an ablkcipher, but it also needs to make other passes
over the data.
Bug: 32975945
Signed-off-by: Eric Biggers <ebiggers@google.com>
Change-Id: I05f9a0e5473ba6115fcc72d5122d6b0b18b2078b
ECB modes don't use an initialization vector. The kernel
/proc/crypto interface doesn't reflect this properly.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from bee038a4bd)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Change-Id: Ief9558d2b41be58a2d845d2033a141b5ef7b585f
Refactor the fs readpage/write tracepoints to move the
inode->path lookup outside the tracepoint code, and pass a pointer
to the path into the tracepoint code instead. This is necessary
because the tracepoint code runs non-preemptible. Thanks to
Trilok Soni for catching this in 4.4.
Change-Id: I7486c5947918d155a30c61d6b9cd5027cf8fbe15
Signed-off-by: Mohan Srinivasan <srmohan@google.com>
When dealing with uncompressed data, there is no need to read a whole
block (default 128K) to get the desired page: the pages are
independent from each others.
This patch change the readpages logic so that reading uncompressed
data only read the number of pages advised by the readahead algorithm.
Moreover, if the page actor contains holes (i.e. pages that are already
up-to-date), squashfs skips the buffer_head associated to those pages.
This patch greatly improve the performance of random reads for
uncompressed files because squashfs only read what is needed. It also
reduces the number of unnecessary reads.
Signed-off-by: Adrien Schildknecht <adriens@google.com>
Change-Id: I1850150fbf4b45c9dd138d88409fea1ab44054c0
Squashfs does not implement .readpages(), so the kernel just repeatedly
calls .readpage().
The readpages function tries to pack as much pages as possible in the
same page actor so that only 1 read request is issued.
Now that the read requests are asynchronous, the kernel can truly
prefetch pages using its readahead algorithm.
Signed-off-by: Adrien Schildknecht <adriens@google.com>
Change-Id: Ice70e029dc24526f61e4e5a1a902588be2212498
The 'll_rw_block' has been deprecated and BIO is now the basic container
for block I/O within the kernel.
Switching to BIO offers 2 advantages:
1/ It removes synchronous wait for the up-to-date buffers: SquashFS
now deals with decompressions/copies asynchronously.
Implementing an asynchronous mechanism to read data is needed to
efficiently implement .readpages().
2/ Prior to this patch, merging the read requests entirely depends on
the IO scheduler. SquashFS has more information than the IO
scheduler about what could be merged. Moreover, merging the reads
at the FS level means that we rely less on the IO scheduler.
Signed-off-by: Adrien Schildknecht <adriens@google.com>
Change-Id: I775d2e11f017476e1899518ab52d9d0a8a0bce28
This patch essentially does 3 things:
1/ Always use an array of page to store the data instead of a mix of
buffers and pages.
2/ It is now possible to have 'holes' in a page actor, i.e. NULL
pages in the array.
When reading a block (default 128K), squashfs tries to grab all
the pages covering this block. If a single page is up-to-date or
locked, it falls back to using an intermediate buffer to do the
read and then copy the pages in the actor. Allowing holes in the
page actor remove the need for this intermediate buffer.
3/ Refactor the wrappers to share code that deals with page actors.
Signed-off-by: Adrien Schildknecht <adriens@google.com>
Change-Id: I98128bed5d518cf31b67e788a85b275e9a323bec
FILE_DIRECT is working fine and offers faster results and lower memory
footprint.
Removing FILE_CACHE makes our life easier because we don't have to
maintain 2 differents function that does the same thing.
Signed-off-by: Adrien Schildknecht <adriens@google.com>
Change-Id: I6689ba74d0042c222a806f9edc539995e8e04c6b
(cherry pick from commit 073931017b)
When file permissions are modified via chmod(2) and the user is not in
the owning group or capable of CAP_FSETID, the setgid bit is cleared in
inode_change_ok(). Setting a POSIX ACL via setxattr(2) sets the file
permissions as well as the new ACL, but doesn't clear the setgid bit in
a similar way; this allows to bypass the check in chmod(2). Fix that.
NB: We did not resolve the ACL leak in this CL, require additional
upstream fix.
References: CVE-2016-7097
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Bug: 32458736
Change-Id: I19591ad452cc825ac282b3cfd2daaa72aa9a1ac1
[ Upstream commit 197c949e77 ]
Backport of this upstream commit into stable kernels :
89c22d8c3b ("net: Fix skb csum races when peeking")
exposed a bug in udp stack vs MSG_PEEK support, when user provides
a buffer smaller than skb payload.
In this case,
skb_copy_and_csum_datagram_iovec(skb, sizeof(struct udphdr),
msg->msg_iov);
returns -EFAULT.
This bug does not happen in upstream kernels since Al Viro did a great
job to replace this into :
skb_copy_and_csum_datagram_msg(skb, sizeof(struct udphdr), msg);
This variant is safe vs short buffers.
For the time being, instead reverting Herbert Xu patch and add back
skb->ip_summed invalid changes, simply store the result of
udp_lib_checksum_complete() so that we avoid computing the checksum a
second time, and avoid the problematic
skb_copy_and_csum_datagram_iovec() call.
This patch can be applied on recent kernels as it avoids a double
checksumming, then backported to stable kernels as a bug fix.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit dfe2042d96)
Bug: 32813456
(cherry picked from commit 0ddb8e0b78)
Since, arm64 can support all offset within a double word limit. Therefore,
now support other lengths within that range as well.
Signed-off-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Pavel Labath <labath@google.com>
Change-Id: Ibcb263a3903572336ccbf96e0180d3990326545a
Bug: 30919905
(cherry picked from commit fdfeff0f9e)
Arm64 hardware does not always report a watchpoint hit address that
matches one of the watchpoints set. It can also report an address
"near" the watchpoint if a single instruction access both watched and
unwatched addresses. There is no straight-forward way, short of
disassembling the offending instruction, to map that address back to
the watchpoint.
Previously, when the hardware reported a watchpoint hit on an address
that did not match our watchpoint (this happens in case of instructions
which access large chunks of memory such as "stp") the process would
enter a loop where we would be continually resuming it (because we did
not recognise that watchpoint hit) and it would keep hitting the
watchpoint again and again. The tracing process would never get
notified of the watchpoint hit.
This commit fixes the problem by looking at the watchpoints near the
address reported by the hardware. If the address does not exactly match
one of the watchpoints we have set, it attributes the hit to the
nearest watchpoint we have. This heuristic is a bit dodgy, but I don't
think we can do much more, given the hardware limitations.
Signed-off-by: Pavel Labath <labath@google.com>
[panand: reworked to rebase on his patches]
Signed-off-by: Pratyush Anand <panand@redhat.com>
[will: use __ffs instead of ffs - 1]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Pavel Labath <labath@google.com>
[pavel: trivial fixup in hw_breakpoint.c:watchpoint_handler]
Change-Id: I714dfaa3947d89d89a9e9a1ea84914d44ba0faa3
Bug: 30919905
ARM64 hardware supports watchpoint at any double word aligned address.
However, it can select any consecutive bytes from offset 0 to 7 from that
base address. For example, if base address is programmed as 0x420030 and
byte select is 0x1C, then access of 0x420032,0x420033 and 0x420034 will
generate a watchpoint exception.
Currently, we do not have such modularity. We can only program byte,
halfword, word and double word access exception from any base address.
This patch adds support to overcome above limitations.
Signed-off-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Pavel Labath <labath@google.com>
Change-Id: I28b1ca63f63182c10c3d6b6b3bacf6c56887ddbe
Bug: 30919905
(cherry picked from commit 651be3cb08)
We only support breakpoint/watchpoint of length 1, 2, 4 and 8. If we can
support other length as well, then user may watch more data with less
number of watchpoints (provided hardware supports it). For example: if we
have to watch only 4th, 5th and 6th byte from a 64 bit aligned address, we
will have to use two slots to implement it currently. One slot will watch a
half word at offset 4 and other a byte at offset 6. If we can have a
watchpoint of length 3 then we can watch it with single slot as well.
ARM64 hardware does support such functionality, therefore adding these new
definitions in generic layer.
Signed-off-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Pavel Labath <labath@google.com>
[pavel: tools/include/uapi/linux/hw_breakpoint.h is not present in this branch]
Change-Id: Ie17ed89ca526e4fddf591bb4e556fdfb55fc2eac
Bug: 30919905
This moves our uses of strcasecmp over to an internal call so we can
easily change implementations later if we so desire. Additionally,
we leverage qstr's where appropriate to save time on comparisons.
Change-Id: I32fdc4fd0cd3b7b735dcfd82f60a2516fd8272a5
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Use the kernel's string hash function instead of rolling
our own. Additionally, save a bit of calculation by using
the qstr struct in place of strings.
Change-Id: I0bbeb5ec2a9233f40135ad632e6f22c30ffa95c1
Signed-off-by: Daniel Rosenberg <drosen@google.com>
This changes sdcardfs to modify the user and group in the
underlying filesystem depending on its usage. Ownership is
set by Android user, and package, as well as if the file is
under obb or cache. Other files can be labeled by extension.
Those values are set via the configfs interace.
To add an entry,
mkdir -p [configfs root]/sdcardfs/extensions/[gid]/[ext]
Bug: 34262585
Change-Id: I4e030ce84f094a678376349b1a96923e5076a0f4
Signed-off-by: Daniel Rosenberg <drosen@google.com>
We call get_derived_permission_new unconditionally, so we don't need
to call update_derived_permission_lock, which does the same thing.
Change-Id: I0748100828c6af806da807241a33bf42be614935
Signed-off-by: Daniel Rosenberg <drosen@google.com>
This allows you to hide the existence of a package from
a user by adding them to an exclude list. If a user
creates that package's folder and is on the exclude list,
they will not see that package's id.
Bug: 34542611
Change-Id: I9eb82e0bf2457d7eb81ee56153b9c7d2f6646323
Signed-off-by: Daniel Rosenberg <drosen@google.com>
This refactors the configfs code to be more easily extended.
It will allow additional files to be added easily.
Bug: 34542611
Bug: 34262585
Change-Id: I73c9b0ae5ca7eb27f4ebef3e6807f088b512d539
Signed-off-by: Daniel Rosenberg <drosen@google.com>
This modifies the permission checks in setattr to
allow for non-owners to modify the timestamp of
files to things other than the current time.
This still requires write access, as enforced by
the permission call, but relaxes the requirement
that the caller must be the owner, allowing those
with group permissions to change it as well.
Bug: 11118565
Change-Id: Ied31f0cce2797675c7ef179eeb4e088185adcbad
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Fix following warning on 32bit ARCH build:
CC drivers/android/binder.o
drivers/android/binder.c: In function ‘binder_transaction’:
./include/linux/kern_levels.h:4:18: warning: format ‘%lld’ expects argument of type ‘long long int’,
but argument 4 has type ‘binder_size_t {aka unsigned int}’ [-Wformat=]
drivers/android/binder.c:2047:3: note: in expansion of macro ‘binder_user_error’
binder_user_error("%d:%d got transaction with unaligned buffers size, %lld\n",
^
Change-Id: I943d0d4d54f7f2a019900cc18e55bed661bec5a5
Fixes: Change-Id: I02417f28cff14688f2e1d6fcb959438fd96566cc
(android: binder: support for scatter-gather.")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Xbox One controllers have multiple interfaces which all have the
same class, subclass, and protocol. One of the these interfaces
has only a single endpoint. When Xpad attempts to bind to this
interface, it causes an oops when trying initialize the output URB
by trying to access the second endpoint's descriptor.
This situation was avoided for known Xbox One devices by checking
the XTYPE constant associated with the VID and PID tuple. However,
this breaks when new or previously unknown Xbox One controllers
are attached to the system.
This change addresses the problem by deriving the XTYPE for Xbox
One controllers based on the interface protocol before checking
the interface number.
Change-Id: If15a19cde514ffdeddb506da9c4d34479408005a
Fixes: 1a48ff81b3 ("Input: xpad - add support for Xbox One controllers")
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
propagate_remount was not accounting for the slave mounts
of other slave mounts, leading to some namespaces not
recieving the remount information.
bug:33731928
Change-Id: Idc9e8c2ed126a4143229fc23f10a959c2d0a3854
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Don't use lookup_one_len so we can grab the spinlock that
protects d_subdirs.
Bug: 30954918
Change-Id: I0c6a393252db7beb467e0d563739a3a14e1b5115
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Sdcardfs uses the same magic value as wrapfs.
This should not be the case. As it is entirely
in memory, the value can be changed without any
loss of compatibility.
Change-Id: I24200b805d5e6d32702638be99e47d50d7f2f746
Signed-off-by: Daniel Rosenberg <drosen@google.com>
This switches sdcardfs over to using permission2.
Instead of mounting several sdcardfs instances onto
the same underlaying directory, you bind mount a
single mount several times, and remount with the
options you want. These are stored in the private
mount data, allowing you to maintain the same tree,
but have different permissions for different mount
points.
Warning functions have been added for permission,
as it should never be called, and the correct
behavior is unclear.
Change-Id: I841b1d70ec60cf2b866fa48edeb74a0b0f8334f5
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Adds support for mount2, remount2, and the functions
to allocate/clone/copy the private data
The next patch will switch over to actually using it.
Change-Id: I8a43da26021d33401f655f0b2784ead161c575e3
Signed-off-by: Daniel Rosenberg <drosen@google.com>
This allows filesystems to use their mount private data to
influence the permssions they use in setattr2. It has
been separated into a new call to avoid disrupting current
setattr users.
Change-Id: I19959038309284448f1b7f232d579674ef546385
Signed-off-by: Daniel Rosenberg <drosen@google.com>
This allows filesystems to use their mount private data to
influence the permssions they return in permission2. It has
been separated into a new call to avoid disrupting current
permission users.
Change-Id: I9d416e3b8b6eca84ef3e336bd2af89ddd51df6ca
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Now we pass the vfsmount when mounting and remounting.
This allows the filesystem to actually set up the mount
specific data, although we can't quite do anything with
it yet. show_options is expanded to include data that
lives with the mount.
To avoid changing existing filesystems, these have
been added as new vfs functions.
Change-Id: If80670bfad9f287abb8ac22457e1b034c9697097
Signed-off-by: Daniel Rosenberg <drosen@google.com>
This starts to add private data associated directly
to mount points. The intent is to give filesystems
a sense of where they have come from, as a means of
letting a filesystem take different actions based on
this information.
Change-Id: Ie769d7b3bb2f5972afe05c1bf16cf88c91647ab2
Signed-off-by: Daniel Rosenberg <drosen@google.com>
This removes a deadlock under low memory conditions.
filp_open can call lookup_slow, which will attempt to
lock the parent.
Change-Id: I940643d0793f5051d1e79a56f4da2fa8ca3d8ff7
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Adding packages to the package list and moving files
takes a large amount of locks, and is currently a
heavy operation. This adds a 'top' field to the
inode_info, which points to the inode for the top
most directory whose owner you would like to match.
On permission checks and get_attr, we look up the
owner based on the information at top. When we change
a package mapping, we need only modify the information
in the corresponding top inode_info's. When renaming,
we must ensure top is set correctly in all children.
This happens when an app specific folder gets moved
outside of the folder for that app.
Change-Id: Ib749c60b568e9a45a46f8ceed985c1338246ec6c
Signed-off-by: Daniel Rosenberg <drosen@google.com>
This fixes a bug where the first lookup of a
file or folder created under a different view
would not be case insensitive. It will now
search through for a case insensitive match
if the initial lookup fails.
Bug:28024488
Change-Id: I4ff9ce297b9f2f9864b47540e740fd491c545229
Signed-off-by: Daniel Rosenberg <drosen@google.com>
