to_clk_*(_hw) macros have been repeatedly defined in many places.
This patch moves all the to_clk_*(_hw) definitions in the common
clock framework to public header clk-provider.h, and drop the local
definitions.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
(cherry picked from commit 5fd9c05c84)
Change-Id: Ib0f9de8b9aeb30302b9d21e6668a35d18764517e
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
LSK 17.07 v4.4-android
* tag 'lsk-v4.4-17.07-android': (402 commits)
dt/vendor-prefixes: remove redundant vendor
Linux 4.4.77
saa7134: fix warm Medion 7134 EEPROM read
x86/mm/pat: Don't report PAT on CPUs that don't support it
ext4: check return value of kstrtoull correctly in reserved_clusters_store
staging: comedi: fix clean-up of comedi_class in comedi_init()
staging: vt6556: vnt_start Fix missing call to vnt_key_init_table.
tcp: fix tcp_mark_head_lost to check skb len before fragmenting
md: fix super_offset endianness in super_1_rdev_size_change
md: fix incorrect use of lexx_to_cpu in does_sb_need_changing
perf tools: Use readdir() instead of deprecated readdir_r() again
perf tests: Remove wrong semicolon in while loop in CQM test
perf trace: Do not process PERF_RECORD_LOST twice
perf dwarf: Guard !x86_64 definitions under #ifdef else clause
perf pmu: Fix misleadingly indented assignment (whitespace)
perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
perf tools: Remove duplicate const qualifier
perf script: Use readdir() instead of deprecated readdir_r()
perf thread_map: Use readdir() instead of deprecated readdir_r()
perf tools: Use readdir() instead of deprecated readdir_r()
...
Conflicts:
Makefile
drivers/Kconfig
drivers/Makefile
drivers/usb/dwc3/gadget.c
Change-Id: Ib4aae2e34ebbf0d7953c748a33f673acb3e744fc
We don't always have easy access to the dentry of a file or directory we
created in debugfs. Add a helper which allows us to get a dentry we
previously created.
The motivation for this change is a problem with blktrace and the blk-mq
debugfs entries introduced in 07e4fead45 ("blk-mq: create debugfs
directory tree"). Namely, in some cases, the directory that blktrace
needs to create may already exist, but in other cases, it may not. We
_could_ rely on a bunch of implied knowledge to decide whether to create
the directory or not, but it's much cleaner on our end to just look it
up.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
(cherry picked from commit a7c5437b0b)
Change-Id: I77b6f2c7df32f904099d23771a53065315cfdc12
CABC(Content Adaptive Backlight Control) is used to
increase the contrast of such LCD-screens the backlight
can be (globally) dimmed when the image to be displayed
is dark (i.e. not comprising high intensity image data)
while the image data is numerically corrected and adapted
to the reduced backlight intensity.
Change-Id: I0bd84375264675943f1b601f0cac8b843567087d
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
LSK 17.06 v4.4-android
* tag 'lsk-v4.4-17.06-android': (134 commits)
ANDROID: sdcardfs: remove dead function open_flags_to_access_mode()
ANDROID: android-base.cfg: split out arm64-specific configs
usb: gadget: f_fs: Fix possibe deadlock
ANDROID: uid_sys_stats: check previous uid_entry before call find_or_register_uid
ANDROID: sdcardfs: d_splice_alias can return error values
android: base-cfg: disable CONFIG_NFS_FS and CONFIG_NFSD
schedstats/eas: guard properly to avoid breaking non-smp schedstats users
BACKPORT: f2fs: sanity check size of nat and sit cache
FROMLIST: f2fs: sanity check checkpoint segno and blkoff
sched/tune: don't use schedtune before it is ready
sched/fair: use SCHED_CAPACITY_SCALE for energy normalization
sched/{fair,tune}: use reciprocal_value to compute boost margin
sched/tune: Initialize raw_spin_lock in boosted_groups
sched/tune: report when SchedTune has not been initialized
sched/tune: fix sched_energy_diff tracepoint
sched/tune: increase group count to 5
cpufreq/schedutil: use boosted_cpu_util for PELT to match WALT
sched/fair: Fix sched_group_energy() to support per-cpu capacity states
sched/fair: discount task contribution to find CPU with lowest utilization
sched/fair: ensure utilization signals are synchronized before use
...
Per the databook of designware mmc controller 2.70a, table 3-2, cmd
done interrupt should be fired as soon as the the cmd is sent via
cmd line. And the response timeout interrupt should be generated
unconditioinally as well if the controller doesn't receive the resp.
However that doesn't seem to meet the fact of rockchip specified Soc
platforms using dwmmc. We have continuously found the the cmd done or
response timeout interrupt missed somehow which took us a long time to
understand what was happening. Finally we narrow down the root to
the reconstruction of sample circuit for dwmmc IP introduced by
rockchip and the buggy design sweeps over all the existing rockchip
Socs using dwmmc disastrously.
It seems no way to work around this bug without the proper break-out
mechanism so that we seek for a parallel pair the same as the handling
for missing data response timeout, namely dto timer. Adding this cto
timer seems easily to handle this bug but it's hard to restrict
the code under the rockchip specified context. So after merging this
patch, it sets up the cto timer for all the platforms using dwmmc IP
which isn't ideal but at least we don't advertise new quirk here.
Fortunately, no obvious performance regression was found by test and the
pre-existing similar catch-all timer for sdhci has proved it's an acceptant
way to make the code as robust as possible.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196321
Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
[shawn.lin: rewrite the code and the commit msg throughout]
Change-Id: I47238c9758fe74b98a1dd3939f22e569261e696f
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
(cherry picked from https://patchwork.kernel.org/patch/9834331/)
RK3328/RK3228 phy registers are mapped by inno-hdmi-phy driver,
there is no need to register hdmi phy debugfs on RK3328/RK3228.
Change-Id: I1e259b75ee7af6f29dffd5526d67776d5c6853ae
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit da4e4f18af)
When a CPU is suspended (either through suspend-to-RAM or CPUidle),
its PMU registers content can be lost, which means that counters
registers values that were initialized on power down entry have to be
reprogrammed on power-up to make sure the counters set-up is preserved
(ie on power-up registers take the reset values on Cold or Warm reset,
which can be architecturally UNKNOWN).
To guarantee seamless profiling conditions across a core power down
this patch adds a CPU PM notifier to ARM pmus, that upon CPU PM
entry/exit from low-power states saves/restores the pmu registers
set-up (by using the ARM perf API), so that the power-down/up cycle does
not affect the perf behaviour (apart from a black-out period between
power-up/down CPU PM notifications that is unavoidable).
Change-Id: Ifbd73b82ca9dc172c58e2488cda1af9af975b14f
Cc: Will Deacon <will.deacon@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Patch based on a previous series by Shashank Sharma.
This introduces optional properties to enable color correction at the
pipe level. It relies on 3 transformations applied to every pixels
displayed. First a lookup into a degamma table, then a multiplication
of the rgb components by a 3x3 matrix and finally another lookup into
a gamma table.
The following properties can be added to a pipe :
- DEGAMMA_LUT : blob containing degamma LUT
- DEGAMMA_LUT_SIZE : number of elements in DEGAMMA_LUT
- CTM : transformation matrix applied after the degamma LUT
- GAMMA_LUT : blob containing gamma LUT
- GAMMA_LUT_SIZE : number of elements in GAMMA_LUT
DEGAMMA_LUT_SIZE and GAMMA_LUT_SIZE are read only properties, set by
the driver to tell userspace applications what sizes should be the
lookup tables in DEGAMMA_LUT and GAMMA_LUT.
A helper is also provided so legacy gamma correction is redirected
through these new properties.
v2: Register LUT size properties as range
v3: Fix round in drm_color_lut_get_value() helper
More docs on how degamma/gamma properties are used
v4: Update contributors
v5: Rename CTM_MATRIX property to CTM (Doh!)
Add legacy gamma_set atomic helper
Describe CTM/LUT acronyms in the kernel doc
v6: Fix missing blob unref in drm_atomic_helper_crtc_reset
Signed-off-by: Kumar, Kiran S <kiran.s.kumar@intel.com>
Signed-off-by: Kausal Malladi <kausalmalladi@gmail.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Rob Bradford <robert.bradford@intel.com>
[danvet: CrOS maintainers are also happy with the userspacde side:
https://codereview.chromium.org/1182063002/ ]
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1456506302-640-4-git-send-email-lionel.g.landwerlin@intel.com
(cherry picked from commit 5488dc16fd)
Change-Id: I8952fa72998b669cf6d8a7e120a72ffb225b1ba1
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Initial patch for generic TEE subsystem.
This subsystem provides:
* Registration/un-registration of TEE drivers.
* Shared memory between normal world and secure world.
* Ioctl interface for interaction with user space.
* Sysfs implementation_id of TEE driver
A TEE (Trusted Execution Environment) driver is a driver that interfaces
with a trusted OS running in some secure environment, for example,
TrustZone on ARM cpus, or a separate secure co-processor etc.
The TEE subsystem can serve a TEE driver for a Global Platform compliant
TEE, but it's not limited to only Global Platform TEEs.
This patch builds on other similar implementations trying to solve
the same problem:
* "optee_linuxdriver" by among others
Jean-michel DELORME<jean-michel.delorme@st.com> and
Emmanuel MICHEL <emmanuel.michel@st.com>
* "Generic TrustZone Driver" by Javier González <javier@javigon.com>
Acked-by: Andreas Dannenberg <dannenberg@ti.com>
Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (HiKey)
Tested-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> (RCAR H3)
Tested-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
(cherry picked from commit 967c9cca2c)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Conflicts:
remove fsi from drivers
drivers/Kconfig
drivers/Makefile
Adds helpers to do SMC and HVC based on ARM SMC Calling Convention.
CONFIG_HAVE_ARM_SMCCC is enabled for architectures that may support the
SMC or HVC instruction. It's the responsibility of the caller to know if
the SMC instruction is supported by the platform.
This patch doesn't provide an implementation of the declared functions.
Later patches will bring in implementations and set
CONFIG_HAVE_ARM_SMCCC for ARM and ARM64 respectively.
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit 98dd64f34f)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
commit 9b3eb54106 upstream.
When CONFIG_XFRM_SUB_POLICY=y, xfrm_dst stores a copy of the flowi for
that dst. Unfortunately, the code that allocates and fills this copy
doesn't care about what type of flowi (flowi, flowi4, flowi6) gets
passed. In multiple code paths (from raw_sendmsg, from TCP when
replying to a FIN, in vxlan, geneve, and gre), the flowi that gets
passed to xfrm is actually an on-stack flowi4, so we end up reading
stuff from the stack past the end of the flowi4 struct.
Since xfrm_dst->origin isn't used anywhere following commit
ca116922af ("xfrm: Eliminate "fl" and "pol" args to
xfrm_bundle_ok()."), just get rid of it. xfrm_dst->partner isn't used
either, so get rid of that too.
Fixes: 9d6ec93801 ("ipv4: Use flowi4 in public route lookup interfaces.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4d22c75d4c ]
If the last section of a core file ends with an unmapped or zero page,
the size of the file does not correspond with the last dump_skip() call.
gdb complains that the file is truncated and can be confusing to users.
After all of the vma sections are written, make sure that the file size
is no smaller than the current file position.
This problem can be demonstrated with gdb's bigcore testcase on the
sparc architecture.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ceea5e3771 upstream.
In tests, which excercise switching of clocksources, a NULL
pointer dereference can be observed on AMR64 platforms in the
clocksource read() function:
u64 clocksource_mmio_readl_down(struct clocksource *c)
{
return ~(u64)readl_relaxed(to_mmio_clksrc(c)->reg) & c->mask;
}
This is called from the core timekeeping code via:
cycle_now = tkr->read(tkr->clock);
tkr->read is the cached tkr->clock->read() function pointer.
When the clocksource is changed then tkr->clock and tkr->read
are updated sequentially. The code above results in a sequential
load operation of tkr->read and tkr->clock as well.
If the store to tkr->clock hits between the loads of tkr->read
and tkr->clock, then the old read() function is called with the
new clock pointer. As a consequence the read() function
dereferences a different data structure and the resulting 'reg'
pointer can point anywhere including NULL.
This problem was introduced when the timekeeping code was
switched over to use struct tk_read_base. Before that, it was
theoretically possible as well when the compiler decided to
reload clock in the code sequence:
now = tk->clock->read(tk->clock);
Add a helper function which avoids the issue by reading
tk_read_base->clock once into a local variable clk and then issue
the read function via clk->read(clk). This guarantees that the
read() function always gets the proper clocksource pointer handed
in.
Since there is now no use for the tkr.read pointer, this patch
also removes it, and to address stopping the fast timekeeper
during suspend/resume, it introduces a dummy clocksource to use
rather then just a dummy read function.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Daniel Mentz <danielmentz@google.com>
Link: http://lkml.kernel.org/r/1496965462-20003-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add dfi and dmc nodes in the device tree for the ARM rk3288 SoC.
To support ddr frequency scaling function, we need enable dmc and
dfi nodes.
Change-Id: Ib796c08c694e74e0da3319d2797e95aecf3e7e73
Signed-off-by: Tang Yun ping <typ@rock-chips.com>
This reverts commit 6e9aa006c4.
UPSTREAM code has support parsing HDMI.20 HF-VSDB.
Change-Id: Ia25ee6a92e9a2fee4b3356446c1198e938c5e74d
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
This structure will be used to save and indicate if sink
supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
in scdc structure
- If SCDC is present, checks if sink is capable of generating
SCDC read request, and marks it in scdc structure.
V2: Addressed review comments
Thierry:
- Fix typos in commit message and make abbreviation consistent
across the commit message.
- Change structure object name from hdmi_info -> hdmi
- Fix typos and abbreviations in description of structure drm_hdmi_info
end the description with a full stop.
- Create a structure drm_scdc, and keep all information related to SCDC
register set (supported, read request supported) etc in it.
Ville:
- Change rr -> read_request
- Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
of HF-VSDB parsing can be kept in same function, in incremental
patches.
V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Addressed review comments from Ville
- Add clock rate calculations for 1/10 and 1/40 ratios
- Remove leftovers from old patchset
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Change-Id: I14d2a5585a528b7195170a4202be87199eb858c6
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-5-git-send-email-shashank.sharma@intel.com
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from 62c58af32c)
This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
This structure will be used to save and indicate if sink
supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
in scdc structure
- If SCDC is present, checks if sink is capable of generating
SCDC read request, and marks it in scdc structure.
V2: Addressed review comments
Thierry:
- Fix typos in commit message and make abbreviation consistent
across the commit message.
- Change structure object name from hdmi_info -> hdmi
- Fix typos and abbreviations in description of structure drm_hdmi_info
end the description with a full stop.
- Create a structure drm_scdc, and keep all information related to SCDC
register set (supported, read request supported) etc in it.
Ville:
- Change rr -> read_request
- Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
of HF-VSDB parsing can be kept in same function, in incremental
patches.
V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Rebase.
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Change-Id: I93cd26ee5c51c3714eb702e8a1bd1b335385f26e
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-4-git-send-email-shashank.sharma@intel.com
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit afa1c76365)
This makes dmc driver possible to register a system status notifier and
other drivers possible to call the notifier call-back easily, so that
the dmc driver can change frequency according to different system status.
Change-Id: I1a4fb4649366d75310d2e29f87775bb2d9ca3d67
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
commit 1be7107fbe upstream.
Stack guard page is a useful feature to reduce a risk of stack smashing
into a different mapping. We have been using a single page gap which
is sufficient to prevent having stack adjacent to a different mapping.
But this seems to be insufficient in the light of the stack usage in
userspace. E.g. glibc uses as large as 64kB alloca() in many commonly
used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX]
which is 256kB or stack strings with MAX_ARG_STRLEN.
This will become especially dangerous for suid binaries and the default
no limit for the stack size limit because those applications can be
tricked to consume a large portion of the stack and a single glibc call
could jump over the guard page. These attacks are not theoretical,
unfortunatelly.
Make those attacks less probable by increasing the stack guard gap
to 1MB (on systems with 4k pages; but make it depend on the page size
because systems with larger base pages might cap stack allocations in
the PAGE_SIZE units) which should cover larger alloca() and VLA stack
allocations. It is obviously not a full fix because the problem is
somehow inherent, but it should reduce attack space a lot.
One could argue that the gap size should be configurable from userspace,
but that can be done later when somebody finds that the new 1MB is wrong
for some special case applications. For now, add a kernel command line
option (stack_guard_gap) to specify the stack gap size (in page units).
Implementation wise, first delete all the old code for stack guard page:
because although we could get away with accounting one extra page in a
stack vma, accounting a larger gap can break userspace - case in point,
a program run with "ulimit -S -v 20000" failed when the 1MB gap was
counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK
and strict non-overcommit mode.
Instead of keeping gap inside the stack vma, maintain the stack guard
gap as a gap between vmas: using vm_start_gap() in place of vm_start
(or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few
places which need to respect the gap - mainly arch_get_unmapped_area(),
and and the vma tree's subtree_gap support for that.
Original-patch-by: Oleg Nesterov <oleg@redhat.com>
Original-patch-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[wt: backport to 4.11: adjust context]
[wt: backport to 4.9: adjust context ; kernel doc was not in admin-guide]
[wt: backport to 4.4: adjust context ; drop ppc hugetlb_radix changes]
Signed-off-by: Willy Tarreau <w@1wt.eu>
[gkh: minor build fixes for 4.4]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 93491ced3c upstream.
Add define for the maximum number of ports on a SuperSpeed hub as per
USB 3.1 spec Table 10-5, and use it when verifying the retrieved hub
descriptor.
This specifically avoids benign attempts to update the DeviceRemovable
mask for non-existing ports (should we get that far).
Fixes: dbe79bbe9d ("USB 3.0 Hub Changes")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the ability to choose between WALT and PELT for utilisation tracking
we can have the situation where we're using WALT to make all the
decisions and reporting PELT figures in the sched_load_avg_(cpu|task)
trace points. This is not too much of an issue, but when analysing trace
it is nice to see numbers representing what the scheduler is using rather
than needing to add in additional sched_walt_* traces to figure it out.
Add reporting for both types, and make the util_avg member reflect what
will be seen from cpu or task_util functions in the scheduler.
Change-Id: I2abbd2c5fa70822096d0f3372b4c12b1c6af1590
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
With the new wakeup approach this sysctl is not necessary any more.
Change-Id: I52114b3c918791f6a4f9f30f50002919ccbc1a9c
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
(cherry picked from commit 885c0d503bcdf0ef4e9b46822496f16b20aa3bbd)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
