PD#SWPL-5522
Problem:
S912 display S912 Android P support for osd
Solution:
modify VIU_MISC_CTRL1 for gxm
Verify:
verified on gxm-q201
Change-Id: I2bccfb3fe03864e55d41ab4f9ecf4db68d9dfbea
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-6807
Problem:
green line displayed when osd alpha 0xff/0x00 continuous
Solution:
close osd matrix, osd always output rgb format and
use osd1_hdr2_mat do rgb2yuv
At the same time, need disable osd1_hdr2_mtx
when dv on
Verify:
g12a/g12b/sm1
Change-Id: I1fdb11707f30a1938167b6bfc8e6ec6bce5485eb
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#TV-6994
Problem:
When ATV Mode has no signal
the bright line interference at the bottom
Solution:
modify VPP_OSD_SC_DUMMY_DATA alpha value
Verify:
verified on txlx-r311
Change-Id: Icc5039f80bd794ed5adb98e22fbf41f52758ef83
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-10115
Problem:
There is no mute amixer scontrol for tas5782
set volume and mute in init tas5782m
Solution:
Add mute function for tas5782
set volume and mute in init tas5782m
Verify:
S400_SBR A113
Change-Id: I4b25da42620407e24f0b26e62bae21cc12081f7c
Signed-off-by: bing.jiang <bing.jiang@amlogic.com>
PD#SWPL-9473
Problem:
vdec cann't release memory in time
Solution:
add retry mechanism for allocate mem fail
Verify:
verified by t962x2_x301
Change-Id: If75e81c75da067bdbbd641614c7d2b2dbdc3799a
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
PD#TV-5968
Problem:
cm size set delay one frame
Solution:
get cm size from scaler, and set size with rdma
Verify:
verify on TL1
Change-Id: I9d1ef3167a4717a20c5d77a4cd7674d5a417526c
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#OTT-4372
Problem:
Need add a extra hdmi_format_para for valid_mode
Solution:
Add a extra hdmi_format_para for valid_mode
Also, fix cedst_en assginment and wrong aud ACR/N parameters when
kernel bootup, need to get current vinfo then set right ARC/N.
Verify:
G12/U212
Change-Id: Ib59986d7436a578daeb7055aa41a379e9381a99b
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-10065
Problem:
TV claims that supporting DV version2, but it lacks
the Max_TMDS_Clock2 600MHz
Solution:
if max tmds clock is less than 600MHz, clear sup_2160p60hz
Verify:
G12/U212
Change-Id: I77c024dfa860bca60020db689c2a07ae8f502528
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#OTT-3688
Problem:
add di when playing encrypted stream(DRM)
Solution:
1. add codec mm interface;
2. set flag_cma '4' in dts for codec mm;
Verify:
verified on u212
Change-Id: If969899e0d5a457a038660c22a1e85dedcfcb40b
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-9471
Problem:
it will hangup when play 3D game for a long time
Solution:
using the origin clk-mux ops to register cpu clock
Verify:
test passed on x301
Change-Id: I1b977e3a9559ef5f376d4cb8a4735e943c07f525
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#SWPL-9676
Problem:
h264 non-tunnel mode video, video resume play will frezee one frame
after pause
Solution:
modify omxpts compenstate condition to let pcr stop in time
Verify:
verify by nts
Change-Id: I719150064b0abe4fdfd230a2429cfdfc000ea786
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
commit 1fad17fb1b upstream.
If wakeup_source_add() is called right after wakeup_source_remove()
for the same wakeup source, timer_setup() may be called for a
potentially scheduled timer which is incorrect.
To avoid that, move the wakeup source timer cancellation from
wakeup_source_drop() to wakeup_source_remove().
Moreover, make wakeup_source_remove() clear the timer function after
canceling the timer to let wakeup_source_not_registered() treat
unregistered wakeup sources in the same way as the ones that have
never been registered.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.4+ <stable@vger.kernel.org> # 4.4+
[ rjw: Subject, changelog, merged two patches together ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change-Id: Iae10e0d836e4933ef0311c72508c5cf246bbe437
PD#SWPL-7071
Problem:
reg_dnr_dm_chrmen not follow db
Solution:
disable chroma dm for ott according to vlsi-baozheng
Verify:
u212
Change-Id: If530c5c5f47e132b01a2cb31a96347f2f465afda
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
PD#SWPL-9350
Problem:
For output with compressed and uncompressed formats,
ppmgr recognizes the compressed format and returns directly.
Solution:
add compatibility with doublewrite.
Verify:
on u212
Change-Id: I9fffa720deee80b5db4ef21086c4638a630f9a80
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
PD#SWPL-9350
Problem:
Interlaced video only shows half.
Solution:
Interlaced video height is divided by 2.
Verify:
on U212
Change-Id: I983e3369687eeb55f03d3e7f8474b9e37549440f
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
PD#SWPL-9350
Problem:
ppmgr not support vf with phy_addr.
Solution:
config canvas
Verify:
on U212
Change-Id: I96629ed6287edaf4e7d7a2673ff604e99e3b12df
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
PD#OTT-4604
Problem:
1.Before systemcontrol starts up, vout monitor takes
place to monitor hpd event of hdmi, but vout server
module is indepent with hdmi module, so the hpd status
that vout server got may out of sync with hdmi. If
the monitor interval is larger than hpd reset duration,
for example, the vout server monitor frequency
for hpd event is 500ms once, but hpd reset duration
of TV is smaller, 20ms~200ms..., vout server may miss
some hpd events, thus there will be no notifications
from vout server to set new output mode.
2.If vout monitor timeout before systemcontrol starts
up, hpd events happen during the interval will
not be handled.
Solution:
add adjustment of hpd monitor time and interval
Verify:
A311D
Change-Id: Ic6c371362c63baf50de3c5849fdbcdc5ec22ef61
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
PD#SWPL-10141
Problem:
When open kasan with vmap stack on ARM32 platform, there
will be a panic issue which pc is running out of range:
[ 56.726530@2] PC is at 0x50
[ 56.729301@2] LR is at 0x0
Solution:
Close kasan when open vmap stack on ARM32
Verify:
TL1
Change-Id: Id82eb27543e8eade86b281cde9e160b8bf4e7878
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-9350
Problem:
freeze frame fail among two vertical videos switching.
Solution:
add keep last frame in ppmgr
Verify:
on U212
Change-Id: I7192c69725ce08a546af3f2252e743224ad19ec3
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
PD#SWPL-9350
Problem:
Low probability of system crash when play live channel
Solution:
Increase the value of stats_get to protect tb_task.
Verify:
on U212
Change-Id: I4a13a3f7f2a4259fc8d4dd6630dd28d82a8c2541
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
PD#SWPL-9350
Problem:
After the HDR video is played, play normal video,
and the display is abnormal.
Solution:
Signal_type and bitdepth need to be reassigned.
Verify:
on U212
Change-Id: Ie2acddff3be34e01062a69d48bf4e82619559fb9
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
PD#SWPL-9350
Problem:
HDMI connection vertical screen, 1080i signal picture jitter.
Solution:
The interlace source is extracted based on the top and bottom values.
Verify:
on U212
Change-Id: I38f91fda32d1275dcc286fbb33034b4fd099e18f
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
PD#SWPL-9350
Problem:
ppmgr does not support 10bit to cause a rotating screen.
Solution:
add vdin support 10bit.
Verify:
on U212
Change-Id: Idbe90f7e351edbc12e0e2d905f06e0cdd18da148
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
PD#SWPL-9788
Problem:
UI sliding is not smooth.
Solution:
revert SWPL-9254 two commits.
Verify:
verify by franklin/galilei
This reverts commit 4c0482c80e.
This reverts commit b78959e21b.
Change-Id: Ifc9ac43e69abb578795ac3f6f9b2f324cbf590f3
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
PD#SWPL-8159
Problem:
HDR-001-TC5 source is dv, need graphic max 300
HDR-001-TC3 source is hdr, need graphic max 210
Solution:
Set 300 for DV source and 210 for HDR source in LL mode
Verify:
Verified on U212
Change-Id: I93c71ee51fc128d9d01113d4e24d4df1786901e2
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-8967
Problem:
ARC amplitude，The test value is 0.376V, requiring 0.4-0.6VPP
Solution:
update to single mode
Verify:
tl1
Change-Id: I59198596f6db22ec49eea35084325005f13bc5b6
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#TV-6869
Problem:
screen jitter while disabling CM
Solution:
using RDMA method to program related registers
Verify:
TL1
Change-Id: I23e947093034107c69b2dc47483d562c95764a44
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
PD#SWPL-6033
Problem:
afbc mode, when di bypass mode switch di path,
will cause flashing
Solution:
when mode change, request hw afbc from vpp, when idle
di use afbc, vpp need switch to none afbc mode, vf add
VIDTYPE_PRE_DI_AFBC flag for vpp use.
Verify:
tl1
Change-Id: I4aaf96044249d5b79bdc627018f0c0714c85f941
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#SWPL-8068
PD#SWPL-8069
Problem:
1. use select to polling frame.
Solution:
1. add when use video layer amlvideo support poll
2. add trace debug info
Verify:
Verify on marconi
Change-Id: Ib1ae87b4b7ab35b075bc357953abe43e3410232a
Signed-off-by: shipeng.sun <shipeng.sun@amlogic.com>
Signed-off-by: Tao Guo <tao.guo@amlogic.com>
PD#TV-6612
Problem:
When 3D LR mode with AFBC, enable sr core0 will display
abnormal on TL1.
Solution:
Bypass sr core0 scaler up function at those cases
Verify:
Verified on X301
Change-Id: Ib36c32df6a05749d87ef0d4deec2acc81694071d
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-8069
Problem:
1.about 2ms latency due to sleep
2.crash while poll ionvideo
Solution:
1.use semaphore instead of sleep
2.fix poll function
3.add trace info for ionvideo
Verify:
U212
Change-Id: Idde64151541d826ba6a6cd1abcc901e80f0e4b45
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
PD#SWPL-10123
Problem:
max size of config store path is wrong
Solution:
use macro CONFIG_PATH_LENG to set
max length of config store path
Verify:
verified on g12b-w400
Change-Id: I0e2d09515099f77ff95505706a0c3b588135c083
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-9678
Problem:
di keep buf for mirror function till next reg
Solution:
1.add api(di_trig_free_mirror_mem) for free mirror mem
after unreg;
2. debug cmd:
echo free_mirror > /sys/class/deinterlace/di0/debug;
Verify:
G12A
Change-Id: If2e5ceb4266cf5df0b79997dbd16f5bd90220ef8
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-10046
Problem:
unexpected conversation result
under 32bit userspace + 64bit kernel
Solution:
use compat_config_para_ex_memtype_s as ge2d_magic
for CONFIG_COMPAT
Verify:
verified on g12b-w400
Change-Id: I5a8fad9c18d9852c4e214c810b910100a30046a9
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-10083
Problem:
vpu_clkb_composite can not set to 500M
Solution:
using CLK_SET_RATE_PARENT to set up relationship
between vpu_clkb_composite and vpu_clkb_tmp_composite,
when change vpu_clkb_composite's rate, it may
change vpu_clkb_tmp_composite'rate to get the best
rate.
Verify:
verified on tl1 sktt
Change-Id: I9a08eab4dd6b2209e0b2589e72e79567589fb217
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#SWPL-9142
Problem:
Audio stuck in stress test.
Solution:
Work around:
Wait until the fifo stops and then stop toddr.
Verify:
Tl1.
Change-Id: I8ce50732a7e23124b4b37374aa4505d79cd68cfe
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-9938
Problem:
logo addr overflows the max size in 1g platform.
Solution:
fixed it
Verify:
verify by fermi
Change-Id: Ic1edc545c702b10d88cd03ddc4b761f142457b43
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#TV-3602
Problem:
The irregular aspect ratio of screen will cause that video
position dose not match the axis even if the source aspect
ration matches the display windows's aspect ratio.
Solution:
Add threshold to omit the irregular screen aspect ratio.
Verify:
Verified on X301
Change-Id: Ie375de69e42fc168fb3b5a51d9ab2662789dc807
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#TV-6846
Problem:
local constrast open failed
Solution:
if the register in db is enbale,set lc_en to 1
Verify:
TL1
Change-Id: Id0bde987d3a45056a86dfe2e758d82a509611b10
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
PD#TV-6913
Problem:
game mode, hdmi delay time too long
Solution:
fine tune setting, make tune P mode will got
the real phase.
Verify:
tl1 android P
Change-Id: I4c4a1d6d6578c5015b556f5e4cc88a592be4d7fa
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#SWPL-9805
Problem:
dolby graphics core setting is marginal at 720@50 or 720@60
Solution:
Leave more margin in vertical potch for graphic core
Another modification: force update core2 and core3 reg
when dolby-vision on
Verify:
local build test on dolby tv 720@50/720@60/1080p24hz
Change-Id: I1019d2c1564230b0e42516fe1a7732ba25b2e8bf
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-7391
Problem:
4k afbc mode, horizontal floral stripe in the lower half of
the screen when HDMI connect to PS4.
Solution:
when game mode and panel is reverse, vdin must delay
one frame, can't read/write the same buffer
Verify:
tl1
Change-Id: I42bb3271b8dd5972799b3dfda021b5c120710bdd
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
