[ Upstream commit 34d35b4edbbe890a91bec939bfd29ad92517a52b ]
tcf_action_init() has logic for checking mismatches between action and
filter offload flags (skip_sw/skip_hw). AFAIU, this is intended to run
on the transition between the new tc_act_bind(flags) returning true (aka
now gets bound to classifier) and tc_act_bind(act->tcfa_flags) returning
false (aka action was not bound to classifier before). Otherwise, the
check is skipped.
For the case where an action is not standalone, but rather it was
created by a classifier and is bound to it, tcf_action_init() skips the
check entirely, and this means it allows mismatched flags to occur.
Taking the matchall classifier code path as an example (with mirred as
an action), the reason is the following:
1 | mall_change()
2 | -> mall_replace_hw_filter()
3 | -> tcf_exts_validate_ex()
4 | -> flags |= TCA_ACT_FLAGS_BIND;
5 | -> tcf_action_init()
6 | -> tcf_action_init_1()
7 | -> a_o->init()
8 | -> tcf_mirred_init()
9 | -> tcf_idr_create_from_flags()
10 | -> tcf_idr_create()
11 | -> p->tcfa_flags = flags;
12 | -> tc_act_bind(flags))
13 | -> tc_act_bind(act->tcfa_flags)
When invoked from tcf_exts_validate_ex() like matchall does (but other
classifiers validate their extensions as well), tcf_action_init() runs
in a call path where "flags" always contains TCA_ACT_FLAGS_BIND (set by
line 4). So line 12 is always true, and line 13 is always true as well.
No transition ever takes place, and the check is skipped.
The code was added in this form in commit c86e0209dc ("flow_offload:
validate flags of filter and actions"), but I'm attributing the blame
even earlier in that series, to when TCA_ACT_FLAGS_SKIP_HW and
TCA_ACT_FLAGS_SKIP_SW were added to the UAPI.
Following the development process of this change, the check did not
always exist in this form. A change took place between v3 [1] and v4 [2],
AFAIU due to review feedback that it doesn't make sense for action flags
to be different than classifier flags. I think I agree with that
feedback, but it was translated into code that omits enforcing this for
"classic" actions created at the same time with the filters themselves.
There are 3 more important cases to discuss. First there is this command:
$ tc qdisc add dev eth0 clasct
$ tc filter add dev eth0 ingress matchall skip_sw \
action mirred ingress mirror dev eth1
which should be allowed, because prior to the concept of dedicated
action flags, it used to work and it used to mean the action inherited
the skip_sw/skip_hw flags from the classifier. It's not a mismatch.
Then we have this command:
$ tc qdisc add dev eth0 clasct
$ tc filter add dev eth0 ingress matchall skip_sw \
action mirred ingress mirror dev eth1 skip_hw
where there is a mismatch and it should be rejected.
Finally, we have:
$ tc qdisc add dev eth0 clasct
$ tc filter add dev eth0 ingress matchall skip_sw \
action mirred ingress mirror dev eth1 skip_sw
where the offload flags coincide, and this should be treated the same as
the first command based on inheritance, and accepted.
[1]: https://lore.kernel.org/netdev/20211028110646.13791-9-simon.horman@corigine.com/
[2]: https://lore.kernel.org/netdev/20211118130805.23897-10-simon.horman@corigine.com/
Fixes: 7adc576512 ("flow_offload: add skip_hw and skip_sw to control if offload the action")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241017161049.3570037-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a7d12d674ac6f2147c18f36d1e15f1a48060edf ]
The fix for MAC addresses broke detection of the naming convention
because it gave network devices no random MAC before bind()
was called. This means that the check for the local assignment bit
was always negative as the address was zeroed from allocation,
instead of from overwriting the MAC with a unique hardware address.
The correct check for whether bind() has altered the MAC is
done with is_zero_ether_addr
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: Greg Thelen <gthelen@google.com>
Diagnosed-by: John Sperbeck <jsperbeck@google.com>
Fixes: bab8eb0dd4cb9 ("usbnet: modern method to get random MAC")
Link: https://patch.msgid.link/20241017071849.389636-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95ecba62e2fd201bcdcca636f5d774f1cd4f1458 ]
Some workloads hit the infamous dev_watchdog() message:
"NETDEV WATCHDOG: eth0 (xxxx): transmit queue XX timed out"
It seems possible to hit this even for perfectly normal
BQL enabled drivers:
1) Assume a TX queue was idle for more than dev->watchdog_timeo
(5 seconds unless changed by the driver)
2) Assume a big packet is sent, exceeding current BQL limit.
3) Driver ndo_start_xmit() puts the packet in TX ring,
and netdev_tx_sent_queue() is called.
4) QUEUE_STATE_STACK_XOFF could be set from netdev_tx_sent_queue()
before txq->trans_start has been written.
5) txq->trans_start is written later, from netdev_start_xmit()
if (rc == NETDEV_TX_OK)
txq_trans_update(txq)
dev_watchdog() running on another cpu could read the old
txq->trans_start, and then see QUEUE_STATE_STACK_XOFF, because 5)
did not happen yet.
To solve the issue, write txq->trans_start right before one XOFF bit
is set :
- _QUEUE_STATE_DRV_XOFF from netif_tx_stop_queue()
- __QUEUE_STATE_STACK_XOFF from netdev_tx_sent_queue()
From dev_watchdog(), we have to read txq->state before txq->trans_start.
Add memory barriers to enforce correct ordering.
In the future, we could avoid writing over txq->trans_start for normal
operations, and rename this field to txq->xoff_start_time.
Fixes: bec251bc8b ("net: no longer stop all TX queues in dev_watchdog()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241015194118.3951657-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33fb988b67050d9bb512f77f08453fa00088943c ]
Applications are sensitive to long network latency, particularly
heartbeat monitoring ones. Longer the tx timeout recovery higher the
risk with such applications on a production machines. This patch
remedies, yet honoring device set tx timeout.
Modify watchdog next timeout to be shorter than the device specified.
Compute the next timeout be equal to device watchdog timeout less the
how long ago queue stop had been done. At next watchdog timeout tx
timeout handler is called into if still in stopped state. Either called
or not called, restore the watchdog timeout back to device specified.
Signed-off-by: Praveen Kumar Kannoju <praveen.kannoju@oracle.com>
Link: https://lore.kernel.org/r/20240508133617.4424-1-praveen.kannoju@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 95ecba62e2fd ("net: fix races in netdev_tx_sent_queue()/dev_watchdog()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c91c46de6b ]
A lot of drivers follow the same scheme to stop / start queues
without introducing locks between xmit and NAPI tx completions.
I'm guessing they all copy'n'paste each other's code.
The original code dates back all the way to e1000 and Linux 2.6.19.
Smaller drivers shy away from the scheme and introduce a lock
which may cause deadlocks in netpoll.
Provide macros which encapsulate the necessary logic.
The macros do not prevent false wake ups, the extra barrier
required to close that race is not worth it. See discussion in:
https://lore.kernel.org/all/c39312a2-4537-14b4-270c-9fe1fbb91e89@gmail.com/
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 95ecba62e2fd ("net: fix races in netdev_tx_sent_queue()/dev_watchdog()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2f5c68e3f ]
driver.rst had a historical form of list of common problems.
In the age os Sphinx and rendered documentation it's better
to use the more usual title + text format.
This will allow us to render kdoc into the output more naturally.
No changes to the actual text.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 95ecba62e2fd ("net: fix races in netdev_tx_sent_queue()/dev_watchdog()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 306ed1728e8438caed30332e1ab46b28c25fe3d8 ]
- There is no NFPROTO_IPV6 family for mark and NFLOG.
- TRACE is also missing module autoload with NFPROTO_IPV6.
This results in ip6tables failing to restore a ruleset. This issue has been
reported by several users providing incomplete patches.
Very similar to Ilya Katsnelson's patch including a missing chunk in the
TRACE extension.
Fixes: 0bfcb7b71e73 ("netfilter: xtables: avoid NFPROTO_UNSPEC where needed")
Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Reported-by: Ilya Katsnelson <me@0upti.me>
Reported-by: Krzysztof Olędzki <ole@ans.pl>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12bc14949c4a7272b509af0f1022a0deeb215fd8 ]
mv88e6393x_port_set_policy doesn't correctly shift the ptr value when
converting the policy format between the old and new styles, so the
target register ends up with the ptr being written over the data bits.
Shift the pointer to align with the format expected by
mv88e6393x_port_policy_write().
Fixes: 6584b26020 ("net: dsa: mv88e6xxx: implement .port_set_policy for Amethyst")
Signed-off-by: Peter Rashleigh <peter@rashleigh.ca>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <20241016040822.3917-1-peter@rashleigh.ca>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb592008f79be52ccef88cd9a5249b3fc0367278 ]
build_skb() returns NULL in case of a memory allocation failure so handle
it inside __octep_oq_process_rx() to avoid NULL pointer dereference.
__octep_oq_process_rx() is called during NAPI polling by the driver. If
skb allocation fails, keep on pulling packets out of the Rx DMA queue: we
shouldn't break the polling immediately and thus falsely indicate to the
octep_napi_poll() that the Rx pressure is going down. As there is no
associated skb in this case, don't process the packets and don't push them
up the network stack - they are skipped.
Helper function is implemented to unmmap/flush all the fragment buffers
used by the dropped packet. 'alloc_failures' counter is incremented to
mark the skb allocation error in driver statistics.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 37d79d0596 ("octeon_ep: add Tx/Rx processing and interrupt support")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd28df26197b2bd0913bf1b36770836481975143 ]
The common code with some packet and index manipulations is extracted and
moved to newly implemented helper to make the code more readable and avoid
duplication. This is a preparation for skb allocation failure handling.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Suggested-by: Simon Horman <horms@kernel.org>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Stable-dep-of: eb592008f79b ("octeon_ep: Add SKB allocation failures handling in __octep_oq_process_rx()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f99cf996ba5a315f8b9f13cc21dff0604a0eb749 ]
Since commit
71ae2cb305 ("net: plip: Fix fall-through warnings for Clang")
plip was not able to send any packets, this patch replaces one
unintended break; with fallthrough; which was originally missed by
commit 9525d69a36 ("net: plip: mark expected switch fall-throughs").
I have verified with a real hardware PLIP connection that everything
works once again after applying this patch.
Fixes: 71ae2cb305 ("net: plip: Fix fall-through warnings for Clang")
Signed-off-by: Jakub Boehm <boehm.jakub@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <20241015-net-plip-tx-fix-v1-1-32d8be1c7e0b@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cb3f56e827abb22c4168ad0c1bbbf401bb2f3b8 ]
The sun3_82586_send_packet() returns NETDEV_TX_OK without freeing skb
in case of skb->len being too long, add dev_kfree_skb() to fix it.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <20241015144148.7918-1-wanghai38@huawei.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8469721034300bbb6dec5b4bf32492c95e16a0c ]
The series in the "fixes" tag added the ability to consider L4 attributes
in routing rules.
The dst lookup on the outer packet of encapsulated traffic in the xfrm
code was not adapted to this change, thus routing behavior that relies
on L4 information is not respected.
Pass the ip protocol information when performing dst lookups.
Fixes: a25724b05a ("Merge branch 'fib_rules-support-sport-dport-and-proto-match'")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b6e2e22cb23105fcb171ab92f0f7516c69c8471 ]
strlen() returns a string length excluding the null byte. If the string
length equals to the maximum buffer length, the buffer will have no
space for the NULL terminating character.
This commit checks this condition and returns failure for it.
Link: https://lore.kernel.org/all/20241007144724.920954-1-leo.yan@arm.com/
Fixes: dec65d79fd ("tracing/probe: Check event name length correctly")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67373ca8404fe57eb1bb4b57f314cff77ce54932 ]
MAXAG is a legitimate value for bmp->db_numag
Fixes: e63866a47556 ("jfs: fix out-of-bounds in dbNextAG() and diAlloc()")
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 134475a9ab8487527238d270639a8cb74c10aab2 ]
Not all tasks have a vDSO mapped, for example kthreads never do. If such
a task ever ends up calling stack_top(), it will derefence the NULL vdso
pointer and crash.
This can for example happen when using kunit:
[<9000000000203874>] stack_top+0x58/0xa8
[<90000000002956cc>] arch_pick_mmap_layout+0x164/0x220
[<90000000003c284c>] kunit_vm_mmap_init+0x108/0x12c
[<90000000003c1fbc>] __kunit_add_resource+0x38/0x8c
[<90000000003c2704>] kunit_vm_mmap+0x88/0xc8
[<9000000000410b14>] usercopy_test_init+0xbc/0x25c
[<90000000003c1db4>] kunit_try_run_case+0x5c/0x184
[<90000000003c3d54>] kunit_generic_run_threadfn_adapter+0x24/0x48
[<900000000022e4bc>] kthread+0xc8/0xd4
[<9000000000200ce8>] ret_from_kernel_thread+0xc/0xa4
Fixes: 803b0fc5c3 ("LoongArch: Add process management")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa5e65dc08 ]
We can see that "Time namespaces are not supported" on LoongArch:
(1) clone3 test
# cd tools/testing/selftests/clone3 && make && ./clone3
...
# Time namespaces are not supported
ok 18 # SKIP Skipping clone3() with CLONE_NEWTIME
# Totals: pass:17 fail:0 xfail:0 xpass:0 skip:1 error:0
(2) timens test
# cd tools/testing/selftests/timens && make && ./timens
...
1..0 # SKIP Time namespaces are not supported
On LoongArch the current kernel does not support CONFIG_TIME_NS which
depends on GENERIC_VDSO_TIME_NS, select GENERIC_VDSO_TIME_NS to enable
CONFIG_TIME_NS to build kernel/time/namespace.c.
Additionally, it needs to define some arch-dependent functions for the
timens, such as __arch_get_timens_vdso_data(), arch_get_vdso_data() and
vdso_join_timens().
At the same time, modify the layout of vvar to use one page size for
generic vdso data, expand another page size for timens vdso data and
assign LOONGARCH_VDSO_DATA_SIZE (maybe exceeds a page size if expand in
the future) for loongarch vdso data, at last add the callback function
vvar_fault() and modify stack_top().
With this patch under CONFIG_TIME_NS:
(1) clone3 test
# cd tools/testing/selftests/clone3 && make && ./clone3
...
ok 18 [739] Result (0) matches expectation (0)
# Totals: pass:18 fail:0 xfail:0 xpass:0 skip:0 error:0
(2) timens test
# cd tools/testing/selftests/timens && make && ./timens
...
# Totals: pass:10 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Stable-dep-of: 134475a9ab84 ("LoongArch: Don't crash in stack_top() for tasks without vDSO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9abe390e689f4f5c23c5f507754f8678431b4f72 ]
Certain portions of code always need to be position-independent
regardless of CONFIG_RELOCATABLE, including code which is executed in an
idmap or which is executed before relocations are applied. In some
kernel configurations the LLD linker generates position-dependent
veneers for such code, and when executed these result in early boot-time
failures.
Marc Zyngier encountered a boot failure resulting from this when
building a (particularly cursed) configuration with LLVM, as he reported
to the list:
https://lore.kernel.org/linux-arm-kernel/86wmjwvatn.wl-maz@kernel.org/
In Marc's kernel configuration, the .head.text and .rodata.text sections
end up more than 128MiB apart, requiring a veneer to branch between the
two:
| [mark@lakrids:~/src/linux]% usekorg 14.1.0 aarch64-linux-objdump -t vmlinux | grep -w _text
| ffff800080000000 g .head.text 0000000000000000 _text
| [mark@lakrids:~/src/linux]% usekorg 14.1.0 aarch64-linux-objdump -t vmlinux | grep -w primary_entry
| ffff8000889df0e0 g .rodata.text 000000000000006c primary_entry,
... consequently, LLD inserts a position-dependent veneer for the branch
from _stext (in .head.text) to primary_entry (in .rodata.text):
| ffff800080000000 <_text>:
| ffff800080000000: fa405a4d ccmp x18, #0x0, #0xd, pl // pl = nfrst
| ffff800080000004: 14003fff b ffff800080010000 <__AArch64AbsLongThunk_primary_entry>
...
| ffff800080010000 <__AArch64AbsLongThunk_primary_entry>:
| ffff800080010000: 58000050 ldr x16, ffff800080010008 <__AArch64AbsLongThunk_primary_entry+0x8>
| ffff800080010004: d61f0200 br x16
| ffff800080010008: 889df0e0 .word 0x889df0e0
| ffff80008001000c: ffff8000 .word 0xffff8000
... and as this is executed early in boot before the kernel is mapped in
TTBR1 this results in a silent boot failure.
Fix this by passing '--pic-veneer' to the linker, which will cause the
linker to use position-independent veneers, e.g.
| ffff800080000000 <_text>:
| ffff800080000000: fa405a4d ccmp x18, #0x0, #0xd, pl // pl = nfrst
| ffff800080000004: 14003fff b ffff800080010000 <__AArch64ADRPThunk_primary_entry>
...
| ffff800080010000 <__AArch64ADRPThunk_primary_entry>:
| ffff800080010000: f004e3f0 adrp x16, ffff800089c8f000 <__idmap_text_start>
| ffff800080010004: 91038210 add x16, x16, #0xe0
| ffff800080010008: d61f0200 br x16
I've opted to pass '--pic-veneer' unconditionally, as:
* In addition to solving the boot failure, these sequences are generally
nicer as they require fewer instructions and don't need to perform
data accesses.
* While the position-independent veneer sequences have a limited +/-2GiB
range, this is not a new restriction. Even kernels built with
CONFIG_RELOCATABLE=n are limited to 2GiB in size as we have several
structues using 32-bit relative offsets and PPREL32 relocations, which
are similarly limited to +/-2GiB in range. These include extable
entries, jump table entries, and alt_instr entries.
* GNU LD defaults to using position-independent veneers, and supports
the same '--pic-veneer' option, so this change is not expected to
adversely affect GNU LD.
I've tested with GNU LD 2.30 to 2.42 inclusive and LLVM 13.0.1 to 19.1.0
inclusive, using the kernel.org binaries from:
* https://mirrors.edge.kernel.org/pub/tools/crosstool/
* https://mirrors.edge.kernel.org/pub/tools/llvm/
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Marc Zyngier <maz@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240927101838.3061054-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d92b90f9a54d9300a6e883258e79f36dab53bfae ]
Replace the fake VLA at end of the vbva_mouse_pointer_shape shape with
a real VLA to fix a "memcpy: detected field-spanning write error" warning:
[ 13.319813] memcpy: detected field-spanning write (size 16896) of single field "p->data" at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 (size 4)
[ 13.319841] WARNING: CPU: 0 PID: 1105 at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 hgsmi_update_pointer_shape+0x192/0x1c0 [vboxvideo]
[ 13.320038] Call Trace:
[ 13.320173] hgsmi_update_pointer_shape [vboxvideo]
[ 13.320184] vbox_cursor_atomic_update [vboxvideo]
Note as mentioned in the added comment it seems the original length
calculation for the allocated and send hgsmi buffer is 4 bytes too large.
Changing this is not the goal of this patch, so this behavior is kept.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827104523.17442-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d196e7589cefe207d5d41f37a0a28a1fdeeb7c6 ]
Both i_mode and noexec checks wrapped in WARN_ON stem from an artifact
of the previous implementation. They used to legitimately check for the
condition, but that got moved up in two commits:
633fb6ac39 ("exec: move S_ISREG() check earlier")
0fd338b2d2 ("exec: move path_noexec() check earlier")
Instead of being removed said checks are WARN_ON'ed instead, which
has some debug value.
However, the spurious path_noexec check is racy, resulting in
unwarranted warnings should someone race with setting the noexec flag.
One can note there is more to perm-checking whether execve is allowed
and none of the conditions are guaranteed to still hold after they were
tested for.
Additionally this does not validate whether the code path did any perm
checking to begin with -- it will pass if the inode happens to be
regular.
Keep the redundant path_noexec() check even though it's mindless
nonsense checking for guarantee that isn't given so drop the WARN.
Reword the commentary and do small tidy ups while here.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20240805131721.765484-1-mjguzik@gmail.com
[brauner: keep redundant path_noexec() check]
Signed-off-by: Christian Brauner <brauner@kernel.org>
[cascardo: keep exit label and use it]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73aeab373557fa6ee4ae0b742c6211ccd9859280 ]
Original state:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\--------------\ \-------------\ \-------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 1 2 4
After commit 0e456dba86c7 ("block, bfq: choose the last bfqq from merge
chain in bfq_setup_cooperator()"), if P1 issues a new IO:
Without the patch:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\------------------------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 2 4
bfqq3 will be used to handle IO from P1, this is not expected, IO
should be redirected to bfqq4;
With the patch:
-------------------------------------------
| |
Process 1 Process 2 Process 3 | Process 4
(BIC1) (BIC2) (BIC3) | (BIC4)
| | | |
\-------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 2 4
IO is redirected to bfqq4, however, procress reference of bfqq3 is still
2, while there is only P2 using it.
Fix the problem by calling bfq_merge_bfqqs() for each bfqq in the merge
chain. Also change bfqq_merge_bfqqs() to return new_bfqq to simplify
code.
Fixes: 0e456dba86c7 ("block, bfq: choose the last bfqq from merge chain in bfq_setup_cooperator()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40d7903386df4d18f04d90510ba90eedee260085 ]
When sending data using DMA at high baudrate (4 Mbdps in local test case) to
a device with small RX buffer which keeps asserting RTS after every received
byte, it is possible that the iMX UART driver would not recognize the falling
edge of RTS input signal and get stuck, unable to transmit any more data.
This condition happens when the following sequence of events occur:
- imx_uart_mctrl_check() is called at some point and takes a snapshot of UART
control signal status into sport->old_status using imx_uart_get_hwmctrl().
The RTSS/TIOCM_CTS bit is of interest here (*).
- DMA transfer occurs, the remote device asserts RTS signal after each byte.
The i.MX UART driver recognizes each such RTS signal change, raises an
interrupt with USR1 register RTSD bit set, which leads to invocation of
__imx_uart_rtsint(), which calls uart_handle_cts_change().
- If the RTS signal is deasserted, uart_handle_cts_change() clears
port->hw_stopped and unblocks the port for further data transfers.
- If the RTS is asserted, uart_handle_cts_change() sets port->hw_stopped
and blocks the port for further data transfers. This may occur as the
last interrupt of a transfer, which means port->hw_stopped remains set
and the port remains blocked (**).
- Any further data transfer attempts will trigger imx_uart_mctrl_check(),
which will read current status of UART control signals by calling
imx_uart_get_hwmctrl() (***) and compare it with sport->old_status .
- If current status differs from sport->old_status for RTS signal,
uart_handle_cts_change() is called and possibly unblocks the port
by clearing port->hw_stopped .
- If current status does not differ from sport->old_status for RTS
signal, no action occurs. This may occur in case prior snapshot (*)
was taken before any transfer so the RTS is deasserted, current
snapshot (***) was taken after a transfer and therefore RTS is
deasserted again, which means current status and sport->old_status
are identical. In case (**) triggered when RTS got asserted, and
made port->hw_stopped set, the port->hw_stopped will remain set
because no change on RTS line is recognized by this driver and
uart_handle_cts_change() is not called from here to unblock the
port->hw_stopped.
Update sport->old_status in __imx_uart_rtsint() accordingly to make
imx_uart_mctrl_check() detect such RTS change. Note that TIOCM_CAR
and TIOCM_RI bits in sport->old_status do not suffer from this problem.
Fixes: ceca629e0b ("[ARM] 2971/1: i.MX uart handle rts irq")
Cc: stable <stable@kernel.org>
Reviewed-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20241002184133.19427-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 705e3ce37bccdf2ed6f848356ff355f480d51a91 ]
Since commit 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init"),
system suspend is broken on AM62 TI platforms.
Before that commit, both DWC3_GUSB3PIPECTL_SUSPHY and DWC3_GUSB2PHYCFG_SUSPHY
bits (hence forth called 2 SUSPHY bits) were being set during core
initialization and even during core re-initialization after a system
suspend/resume.
These bits are required to be set for system suspend/resume to work correctly
on AM62 platforms.
Since that commit, the 2 SUSPHY bits are not set for DEVICE/OTG mode if gadget
driver is not loaded and started.
For Host mode, the 2 SUSPHY bits are set before the first system suspend but
get cleared at system resume during core re-init and are never set again.
This patch resovles these two issues by ensuring the 2 SUSPHY bits are set
before system suspend and restored to the original state during system resume.
Cc: stable@vger.kernel.org # v6.9+
Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init")
Link: https://lore.kernel.org/all/1519dbe7-73b6-4afc-bfe3-23f4f75d772f@kernel.org/
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20241011-am62-lpm-usb-v3-1-562d445625b5@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c35ba0ac48355df1d11fcce85945f76c42d250ac ]
Split the PORT and CAPs macro definitions into a separate file to
facilitate sharing with other files without the need to include the entire
xhci.h.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240124152525.3910311-2-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 705e3ce37bcc ("usb: dwc3: core: Fix system suspend on TI AM62 platforms")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0db885fb0 ]
USB3.2 spec section 9.2.5.4 quotes that a function may signal that
it wants to exit from Function Suspend by sending a Function
Wake Notification to the host if it is enabled for function
remote wakeup. Add an api in composite layer that can be used
by the function drivers to support this feature. Also expose
a gadget op so that composite layer can trigger a wakeup request
to the UDC driver.
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Link: https://lore.kernel.org/r/1679694482-16430-4-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 705e3ce37bcc ("usb: dwc3: core: Fix system suspend on TI AM62 platforms")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9499327714de7bc5cf6c792112c1474932d8ad31 ]
The configfs store callback should return the number of bytes consumed
not the total number of bytes we actually stored. These could differ if
for example the passed in string had a newline we did not store.
If the returned value does not match the number of bytes written the
writer might assume a failure or keep trying to write the remaining bytes.
For example the following command will hang trying to write the final
newline over and over again (tested on bash 2.05b):
echo foo > function_name
Fixes: 993a44fa85 ("usb: gadget: f_uac2: allow changing interface name via configfs")
Cc: stable <stable@kernel.org>
Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>
Link: https://lore.kernel.org/r/20241006232637.4267-1-kgroeneveld@lenbrook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e60284b63245b84c3ae352427ed5ff8b79266b91 ]
Most writes to configfs handle an optional newline, but do not require
it. By using the number of bytes written as the limit for scnprintf()
it is guaranteed that the final character in the buffer will be
overwritten.
This is expected if it is a newline but is undesirable when a string is
written "as-is" (as libusbgx does, for example).
Update the store function to strip an optional newline, matching the
behaviour of usb_string_copy().
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20240708142553.3995022-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 9499327714de ("usb: gadget: f_uac2: fix return value for UAC2_ATTRIBUTE_STRING store")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60034e0aedf507888c4a880f57011bb7f5d7700c ]
There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array. However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it. This misunderstanding has led to buffer-overruns
in the past. It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases). So let's
do that.
Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: James Gruber <jimmyjgruber@gmail.com>
Cc: Yadwinder Singh <yadi.brar01@gmail.com>
Cc: Jaswinder Singh <jaswinder.singh@linaro.org>
Cc: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231213164246.1021885-4-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 9499327714de ("usb: gadget: f_uac2: fix return value for UAC2_ATTRIBUTE_STRING store")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30c9ae5ece8ecd69d36e6912c2c0896418f2468c ]
Treat each completed full size write to /dev/ttyDBC0 as a separate usb
transfer. Make sure the size of the TRBs matches the size of the tty
write by first queuing as many max packet size TRBs as possible up to
the last TRB which will be cut short to match the size of the tty write.
This solves an issue where userspace writes several transfers back to
back via /dev/ttyDBC0 into a kfifo before dbgtty can find available
request to turn that kfifo data into TRBs on the transfer ring.
The boundary between transfer was lost as xhci-dbgtty then turned
everyting in the kfifo into as many 'max packet size' TRBs as possible.
DbC would then send more data to the host than intended for that
transfer, causing host to issue a babble error.
Refuse to write more data to kfifo until previous tty write data is
turned into properly sized TRBs with data size boundaries matching tty
write size
Tested-by: Uday M Bhat <uday.m.bhat@intel.com>
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241016140000.783905-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13f8f1e05f1dc36dbba6cba0ae03354c0dafcde7 ]
The arm64 uprobes code is broken for big-endian kernels as it doesn't
convert the in-memory instruction encoding (which is always
little-endian) into the kernel's native endianness before analyzing and
simulating instructions. This may result in a few distinct problems:
* The kernel may may erroneously reject probing an instruction which can
safely be probed.
* The kernel may erroneously erroneously permit stepping an
instruction out-of-line when that instruction cannot be stepped
out-of-line safely.
* The kernel may erroneously simulate instruction incorrectly dur to
interpretting the byte-swapped encoding.
The endianness mismatch isn't caught by the compiler or sparse because:
* The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so
the compiler and sparse have no idea these contain a little-endian
32-bit value. The core uprobes code populates these with a memcpy()
which similarly does not handle endianness.
* While the uprobe_opcode_t type is an alias for __le32, both
arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[]
to the similarly-named probe_opcode_t, which is an alias for u32.
Hence there is no endianness conversion warning.
Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and
adding the appropriate __le32_to_cpu() conversions prior to consuming
the instruction encoding. The core uprobes copies these fields as opaque
ranges of bytes, and so is unaffected by this change.
At the same time, remove MAX_UINSN_BYTES and consistently use
AARCH64_INSN_SIZE for clarity.
Tested with the following:
| #include <stdio.h>
| #include <stdbool.h>
|
| #define noinline __attribute__((noinline))
|
| static noinline void *adrp_self(void)
| {
| void *addr;
|
| asm volatile(
| " adrp %x0, adrp_self\n"
| " add %x0, %x0, :lo12:adrp_self\n"
| : "=r" (addr));
| }
|
|
| int main(int argc, char *argv)
| {
| void *ptr = adrp_self();
| bool equal = (ptr == adrp_self);
|
| printf("adrp_self => %p\n"
| "adrp_self() => %p\n"
| "%s\n",
| adrp_self, ptr, equal ? "EQUAL" : "NOT EQUAL");
|
| return 0;
| }
.... where the adrp_self() function was compiled to:
| 00000000004007e0 <adrp_self>:
| 4007e0: 90000000 adrp x0, 400000 <__ehdr_start>
| 4007e4: 911f8000 add x0, x0, #0x7e0
| 4007e8: d65f03c0 ret
Before this patch, the ADRP is not recognized, and is assumed to be
steppable, resulting in corruption of the result:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0xffffffffff7e0
| NOT EQUAL
After this patch, the ADRP is correctly recognized and simulated:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| #
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
Fixes: 9842ceae9f ("arm64: Add uprobe support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9495a5b731fcaf580448a3438d63601c88367661 ]
In userspace, you can add a tid filter by setting
the "task.tid" field for "bpf_iter_link_info".
However, `get_pid_task` when called for the
`BPF_TASK_ITER_TID` type should have been using
`PIDTYPE_PID` (tid) instead of `PIDTYPE_TGID` (pid).
Fixes: f0d74c4da1 ("bpf: Parameterize task iterators.")
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241016210048.1213935-1-linux@jordanrome.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e59db0623f6955986d1be0880b351a1f56e7fd6d ]
According to the prototype formal BPF memory consistency model
discussed e.g. in [1] and following the ordering properties of
the C/in-kernel macro atomic_cmpxchg(), a BPF atomic operation
with the BPF_CMPXCHG modifier is fully ordered. However, the
current RISC-V JIT lowerings fail to meet such memory ordering
property. This is illustrated by the following litmus test:
BPF BPF__MP+success_cmpxchg+fence
{
0:r1=x; 0:r3=y; 0:r5=1;
1:r2=y; 1:r4=f; 1:r7=x;
}
P0 | P1 ;
*(u64 *)(r1 + 0) = 1 | r1 = *(u64 *)(r2 + 0) ;
r2 = cmpxchg_64 (r3 + 0, r4, r5) | r3 = atomic_fetch_add((u64 *)(r4 + 0), r5) ;
| r6 = *(u64 *)(r7 + 0) ;
exists (1:r1=1 /\ 1:r6=0)
whose "exists" clause is not satisfiable according to the BPF
memory model. Using the current RISC-V JIT lowerings, the test
can be mapped to the following RISC-V litmus test:
RISCV RISCV__MP+success_cmpxchg+fence
{
0:x1=x; 0:x3=y; 0:x5=1;
1:x2=y; 1:x4=f; 1:x7=x;
}
P0 | P1 ;
sd x5, 0(x1) | ld x1, 0(x2) ;
L00: | amoadd.d.aqrl x3, x5, 0(x4) ;
lr.d x2, 0(x3) | ld x6, 0(x7) ;
bne x2, x4, L01 | ;
sc.d x6, x5, 0(x3) | ;
bne x6, x4, L00 | ;
fence rw, rw | ;
L01: | ;
exists (1:x1=1 /\ 1:x6=0)
where the two stores in P0 can be reordered. Update the RISC-V
JIT lowerings/implementation of BPF_CMPXCHG to emit an SC with
RELEASE ("rl") annotation in order to meet the expected memory
ordering guarantees. The resulting RISC-V JIT lowerings of
BPF_CMPXCHG match the RISC-V lowerings of the C atomic_cmpxchg().
Other lowerings were fixed via 20a759df3bba ("riscv, bpf: make
some atomic operations fully ordered").
Fixes: dd642ccb45 ("riscv, bpf: Implement more atomic operations for RV64")
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lpc.events/event/18/contributions/1949/attachments/1665/3441/bpfmemmodel.2024.09.19p.pdf [1]
Link: https://lore.kernel.org/bpf/20241017143628.2673894-1-parri.andrea@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d62b14045c6511a7b2d4948d1a83a4e592deeb05 ]
Command bitmask have a dedicated bit for MANAGE_PAGES command, this bit
isn't Initialize during command bitmask Initialization, only during
MANAGE_PAGES.
In addition, mlx5_cmd_trigger_completions() is trying to trigger
completion for MANAGE_PAGES command as well.
Hence, in case health error occurred before any MANAGE_PAGES command
have been invoke (for example, during mlx5_enable_hca()),
mlx5_cmd_trigger_completions() will try to trigger completion for
MANAGE_PAGES command, which will result in null-ptr-deref error.[1]
Fix it by Initialize command bitmask correctly.
While at it, re-write the code for better understanding.
[1]
BUG: KASAN: null-ptr-deref in mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
Write of size 4 at addr 0000000000000214 by task kworker/u96:2/12078
CPU: 10 PID: 12078 Comm: kworker/u96:2 Not tainted 6.9.0-rc2_for_upstream_debug_2024_04_07_19_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_health0000:08:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x7e/0xc0
kasan_report+0xb9/0xf0
kasan_check_range+0xec/0x190
mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
mlx5_cmd_flush+0x94/0x240 [mlx5_core]
enter_error_state+0x6c/0xd0 [mlx5_core]
mlx5_fw_fatal_reporter_err_work+0xf3/0x480 [mlx5_core]
process_one_work+0x787/0x1490
? lockdep_hardirqs_on_prepare+0x400/0x400
? pwq_dec_nr_in_flight+0xda0/0xda0
? assign_work+0x168/0x240
worker_thread+0x586/0xd30
? rescuer_thread+0xae0/0xae0
kthread+0x2df/0x3b0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
Fixes: 9b98d395b8 ("net/mlx5: Start health poll at earlier stage of driver load")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06cd555f73 ]
There is no need to destroy and allocate cmd SW structs during reload,
this is time consuming for no reason.
Hence, split mlx5_cmd_init() to probe and reload routines.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: d62b14045c65 ("net/mlx5: Fix command bitmask initialization")
Signed-off-by: Sasha Levin <sashal@kernel.org>
