There is a statement that is indented with spaces instead of a tab.
Replace spaces with a tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The TDR will be randomly failed due to compute ring
test failure. If the compute ring wptr & 0x7ff(ring_buf_mask)
is 0x100 then after map mqd the compute ring rptr will be
synced with 0x100. And the ring test packet size is also 0x100.
Then after invocation of amdgpu_ring_commit, the cp will not
really handle the packet on the ring buffer because rptr is equal to wptr.
Signed-off-by: Yintian Tao <yttao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The Thundersoft TST178 tablet uses a DSI panel with an external PWM
controller (as all DSI panels do). But unlike other DSI panels a duty-cycle
of 100% turns the backlight off and 0% sets it to maximum brightness.
I've checked the VBT and there is a BDB_LVDS_BACKLIGHT section, but
it does not set the active_low_pwm flag. This tablet re-uses the main
PCI vendor and product ids for the subsystem ids, so I see no other option
then to add a DMI based quirk to fix this.
Note that the PWM backlight code in intel_panel.c currently does not honor
the vbt.active_low_pwm flag, but that does not matter in this case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221172927.510027-2-hdegoede@redhat.com
According to Dell, trying to match their panels via OUI is not reliable
enough and we've been told that we should check against the EDID
instead. As well, Dell seems to have some panels that are actually
intended to switch between using PWM for backlight controls and DPCD for
backlight controls depending on whether or not the panel is in HDR or
SDR mode. Yikes.
Regardless, we need to add quirks for these so that DPCD backlight
controls get enabled by default, since without additional driver support
that's the only form of brightness control that will work. Hopefully in
the future we can remove these quirks once we have a better way of
probing for this.
Changes since v1:
* Add one more EDID per Dell's request
* Remove model number (which is possibly wrong) and replace with Dell
CML 2020 systems
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211183358.157448-4-lyude@redhat.com
Reviewed-by: Adam Jackson <ajax@redhat.com>
The X1 Extreme is one of the systems that lies about which backlight
interface that it uses in its VBIOS as PWM backlight controls don't work
at all on this machine. It's possible that this panel could be one of
the infamous ones that can switch between PWM mode and DPCD backlight
control mode, but we haven't gotten any more details on this from Lenovo
just yet. For the time being though, making sure the backlight 'just
works' is a bit more important.
So, add a quirk to force DPCD backlight controls on for these systems
based on EDID (since this panel doesn't appear to fill in the device ID).
Hopefully in the future we'll figure out a better way of probing this.
Changes since v2:
* The bugzilla URL is deprecated, bug reporting happens on gitlab now.
Update the messages we print to reflect this
* Also, take the opportunity to move FDO_BUG_URL out of i915_utils.c and
into i915_utils.h so that other places which print things that aren't
traditional errors but are worth filing bugs about, can actually use
it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303215320.93491-1-lyude@redhat.com
The whole point of using OUIs is so that we can recognize certain
devices and potentially apply quirks for them. Normally this should work
quite well, but there appears to be quite a number of laptop panels out
there that will fill the OUI but not the device ID. As such, for devices
like this I can't imagine it's a very good idea to try relying on OUIs
for applying quirks. As well, some laptop vendors have confirmed to us
that their panels have this exact issue.
So, let's introduce the ability to apply DP quirks based on EDID
identification. We reuse the same quirk bits for OUI-based quirks, so
that callers can simply check all possible quirks using
drm_dp_has_quirk().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211183358.157448-2-lyude@redhat.com
HDCP Repeater initializes seq_num_V to 0 at the beginning of
hdcp Session i.e. after AKE_init received, refer
HDCP 2.2 Spec HDMI PAGE 19, DP PAGE 20.
HDCP 2.2 Comp specs 1B-06 test verifies that whether DUT
considers failure of authentication if the repeater provides a
non-zero value in seq_num_V in the first,
RepeaterAuth_Send_ReceiverID_List message.
Make sure that HDCP repeater initializes seq_num_V to zero at
beginning of session i.e. after AKE_Init, fail the Auth if
there is non zero seq_num_V.
v2:
- Used existing hdcp2_encrypted flag instead of
declaring new flag. [Ram]
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200220123217.23635-2-anshuman.gupta@intel.com
For our convenience, and to avoid frequent allocations, we placed some
lists we use for execbuf inside the common i915_vma struct. As we look
to parallelise execbuf, such fields guarded by the struct_mutex BKL must
be pulled under local control. Instead of using the i915_vma as our
primary means of tracking the user's list of objects and their virtual
mappings, we use a local eb_vma with the same lists as before (just now
local not global).
This should allow us to only perform the lookup of vma used for
execution once during the execbuf ioctl, as currently we need to remove
our secrets from inside i915_vma everytime we drop the struct_mutex as
another execbuf may use the shared locations.
Once potential user visible consequence is that we can remove the
requirement that the execobj[] be unique, and only require that they do
not conflict (i.e. you cannot softpin the same object into two locations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303204345.1859734-2-chris@chris-wilson.co.uk
With the goal of removing the serialisation from around execbuf, we will
no longer have the privilege of there being a single execbuf in flight
at any time and so will only be able to inspect the user's flags within
the carefully controlled execbuf context. i915_gem_evict_for_node() is
the only user outside of execbuf that currently peeks at the flag to
convert an overlapping softpinned request from ENOSPC to EINVAL. Retract
this nicety and only report ENOSPC if the location is in current use,
either due to this execbuf or another.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200303204345.1859734-1-chris@chris-wilson.co.uk
Converts remaining instances of the printk based logging macros in
i915/display/intel_hdcp.c with the struct drm_device based macros
manually.
This is continuation of commit 65833c4638 ("drm/i915/hdcp: conversion
to struct drm_device based logging macros.")
v2:
i915_dev_priv is used instead of drm_device for reusability [JaniN]
v3:
Made it independent from the series.
once instance of dev_priv naming is changed to i915 [Jani N]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212123007.6659-1-ramalingam.c@intel.com
If the GPU isn't idle after signalling pm_runtime_mark_last_busy() plus
waiting for the autosuspend delay there's likely something wrong with
the way we check idleness so warn about that.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Without that runtime suspend is often blocked due to
etnaviv_gpu_rpm_suspend() returning -EBUSY since the FE seems to trigger
the MC in its idle loop.
Ignoring the MC bit makes the GPU suspend as expected. This was tested
on GC7000.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
We were missing out on some bits the vendor kernel driver knows about.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Update the state HI and common header from rnndb commit
commit 19280a95a (rnndb: Update idle bits)
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Use 'is' instead of 'it' so it becomes a valid sentence and
spell 'resetting' correctly.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
