Add support for scanning the full list of per-layout segment commit
arrays to nfs_clear_pnfs_ds_commit_verifiers().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Instead of trying to save the commit verifiers and checking them against
previous writes, adopt the same strategy as for buffered writes, of
just checking the verifiers at commit time.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add a pNFS callback to allow the O_DIRECT code to release the DS
commitinfo when freeing the dreq.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add support for scanning the full list of per-layout segment commit
arrays to pnfs_generic_commit_pagelist().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add support for scanning the full list of per-layout segment commit
arrays to pnfs_generic_recover_commit_reqs().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add support for scanning the full list of per-layout segment commit
arrays to pnfs_generic_scan_commit_lists()
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When we have multiple layout segments with different lists of mirrored
data, we need to track the commits on a per layout segment basis.
This patch adds a list to support this tracking in struct
pnfs_ds_commit_info.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Function gfs2_recover_func grabs the sd_log_flush_lock rw_semaphore in
write mode. This is unnecessary because we only need to prevent log flush
from using sd_log_bio bio while it does. Therefore, a read lock will be
enough. This is a small step in cleaning up log flush.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, if the ail1 flush got stuck for some reason, there
were no clues as to why. This patch introduces a check for getting
stuck for more than a minute, and if it happens, it dumps the items
still remaining on the ail1 list.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In function try_rgrp_unlink, we added a temporary lock of the
sd_log_flush_lock while searching the bitmaps. This protected us from
problems in which dinodes being freed were still in a state of flux
because the rgrp was in an active transaction. It was a kludge.
Now that we've straightened out the code for inode eviction, deletes,
and all the recovery mess, we no longer need this kludge.
This patch removes it, and should improve performance.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
We now get the quota data structure when opening a file writable and put it
when closing that writable file descriptor, so there no longer is a need for
gfs2_qa_{get,put} while we're holding a writable file descriptor.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Keeping reservations and quotas separate helps reviewing the code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, multiple users called gfs2_qa_alloc which allocated
a qadata structure to the inode, if quotas are turned on. Later, in
file close or evict, the structure was deleted with gfs2_qa_delete.
But there can be several competing processes who need access to the
structure. There were races between file close (release) and the others.
Thus, a release could delete the structure out from under a process
that relied upon its existence. For example, chown.
This patch changes the management of the qadata structures to be
a get/put scheme. Function gfs2_qa_alloc has been changed to gfs2_qa_get
and if the structure is allocated, the count essentially starts out at
1. Function gfs2_qa_delete has been renamed to gfs2_qa_put, and the
last guy to decrement the count to 0 frees the memory.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, multiple callers called gfs2_rsqa_alloc to force
the existence of a reservations structure and a quota data structure
if needed. However, now the reservations are handled separately, so
the quota data is only the quota data. So we eliminate the one in
favor of just calling gfs2_qa_alloc directly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Replace open-coded versions of list_first_entry and list_last_entry with those
functions.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When allocating a new inode, mark the iopen glock holder as uninitialized to
make sure gfs2_evict_inode won't fail after an incomplete create or lookup. In
gfs2_evict_inode, allow the inode glock to be NULL and remove the duplicate
iopen glock teardown code. In gfs2_inode_lookup, don't tear down things that
gfs2_evict_inode will already tear down.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
So far, with xino=auto, we only enable xino if we know that all
underlying filesystem use 32bit inode numbers.
When users configure overlay with xino=auto, they already declare that
they are ready to handle 64bit inode number from overlay.
It is a very common case, that underlying filesystem uses 64bit ino,
but rarely or never uses the high inode number bits (e.g. tmpfs, xfs).
Leaving it for the users to declare high ino bits are unused with
xino=on is not a recipe for many users to enjoy the benefits of xino.
There appears to be very little reason not to enable xino when users
declare xino=auto even if we do not know how many bits underlying
filesystem uses for inode numbers.
In the worst case of xino bits overflow by real inode number, we
already fall back to the non-xino behavior - real inode number with
unique pseudo dev or to non persistent inode number and overlay st_dev
(for directories).
The only annoyance from auto enabling xino is that xino bits overflow
emits a warning to kmsg. Suppress those warnings unless users explicitly
asked for xino=on, suggesting that they expected high ino bits to be
unused by underlying filesystem.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When xino feature is enabled and a real directory inode number overflows
the lower xino bits, we cannot map this directory inode number to a unique
and persistent inode number and we fall back to the real inode st_ino and
overlay st_dev.
The real inode st_ino with high bits may collide with a lower inode number
on overlay st_dev that was mapped using xino.
To avoid possible collision with legitimate xino values, map a non
persistent inode number to a dedicated range in the xino address space.
The dedicated range is created by adding one more bit to the number of
reserved high xino bits. We could have added just one more fsid, but that
would have had the undesired effect of changing persistent overlay inode
numbers on kernel or require more complex xino mapping code.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There is no reason to deplete the system's global get_next_ino() pool for
overlay non-persistent inode numbers and there is no reason at all to
allocate non-persistent inode numbers for non-directories.
For non-directories, it is much better to leave i_ino the same as real
i_ino, to be consistent with st_ino/d_ino.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Changes to underlying layers should not cause WARN_ON(), but this repro
does:
mkdir w l u mnt
sudo mount -t overlay -o workdir=w,lowerdir=l,upperdir=u overlay mnt
touch mnt/h
ln u/h u/k
rm -rf mnt/k
rm -rf mnt/h
dmesg
------------[ cut here ]------------
WARNING: CPU: 1 PID: 116244 at fs/inode.c:302 drop_nlink+0x28/0x40
After upper hardlinks were added while overlay is mounted, unlinking all
overlay hardlinks drops overlay nlink to zero before all upper inodes
are unlinked.
After unlink/rename prevent i_nlink from going to zero if there are still
hashed aliases (i.e. cached hard links to the victim) remaining.
Reported-by: Phasip <phasip@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In commit f467cad95f, I added the ability to force a recalculation of
the filesystem summary counters if they seemed incorrect. This was done
(not entirely correctly) by tweaking the log code to write an unmount
record without the UMOUNT_TRANS flag set. At next mount, the log
recovery code will fail to find the unmount record and go into recovery,
which triggers the recalculation.
What actually gets written to the log is what ought to be an unmount
record, but without any flags set to indicate what kind of record it
actually is. This worked to trigger the recalculation, but we shouldn't
write bogus log records when we could simply write nothing.
Fixes: f467cad95f ("xfs: force summary counter recalc at next mount")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
There's lots of indent in this code which makes it a bit hard to
follow. We are also going to completely rework the inode lookup code
as part of the inode reclaim rework, so factor out the inode lookup
code from the inode cluster freeing code.
Based on prototype code from Christoph Hellwig.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We currently wake anything waiting on the log tail to move whenever
the log item at the tail of the log is removed. Historically this
was fine behaviour because there were very few items at any given
LSN. But with delayed logging, there may be thousands of items at
any given LSN, and we can't move the tail until they are all gone.
Hence if we are removing them in near tail-first order, we might be
waking up processes waiting on the tail LSN to change (e.g. log
space waiters) repeatedly without them being able to make progress.
This also occurs with the new sync push waiters, and can result in
thousands of spurious wakeups every second when under heavy direct
reclaim pressure.
To fix this, check that the tail LSN has actually changed on the
AIL before triggering wakeups. This will reduce the number of
spurious wakeups when doing bulk AIL removal and make this code much
more efficient.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Factor the common AIL deletion code that does all the wakeups into a
helper so we only have one copy of this somewhat tricky code to
interface with all the wakeups necessary when the LSN of the log
tail changes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The XFS inode item slab actually reclaimed by inode shrinker
callbacks from the memory reclaim subsystem. These should be marked
as reclaimable so the mm subsystem has the full picture of how much
memory it can actually reclaim from the XFS slab caches.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The buffer cache shrinker frees more than just the xfs_buf slab
objects - it also frees the pages attached to the buffers. Make sure
the memory reclaim code accounts for this memory being freed
correctly, similar to how the inode shrinker accounts for pages
freed from the page cache due to mapping invalidation.
We also need to make sure that the mm subsystem knows these are
reclaimable objects. We provide the memory reclaim subsystem with a
a shrinker to reclaim xfs_bufs, so we should really mark the slab
that way.
We also have a lot of xfs_bufs in a busy system, spread them around
like we do inodes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Running metadata intensive workloads, I've been seeing the AIL
pushing getting stuck on pinned buffers and triggering log forces.
The log force is taking a long time to run because the log IO is
getting throttled by wbt_wait() - the block layer writeback
throttle. It's being throttled because there is a huge amount of
metadata writeback going on which is filling the request queue.
IOWs, we have a priority inversion problem here.
Mark the log IO bios with REQ_IDLE so they don't get throttled
by the block layer writeback throttle. When we are forcing the CIL,
we are likely to need to to tens of log IOs, and they are issued as
fast as they can be build and IO completed. Hence REQ_IDLE is
appropriate - it's an indication that more IO will follow shortly.
And because we also set REQ_SYNC, the writeback throttle will now
treat log IO the same way it treats direct IO writes - it will not
throttle them at all. Hence we solve the priority inversion problem
caused by the writeback throttle being unable to distinguish between
high priority log IO and background metadata writeback.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In certain situations the background CIL push can be indefinitely
delayed. While we have workarounds from the obvious cases now, it
doesn't solve the underlying issue. This issue is that there is no
upper limit on the CIL where we will either force or wait for
a background push to start, hence allowing the CIL to grow without
bound until it consumes all log space.
To fix this, add a new wait queue to the CIL which allows background
pushes to wait for the CIL context to be switched out. This happens
when the push starts, so it will allow us to block incoming
transaction commit completion until the push has started. This will
only affect processes that are running modifications, and only when
the CIL threshold has been significantly overrun.
This has no apparent impact on performance, and doesn't even trigger
until over 45 million inodes had been created in a 16-way fsmark
test on a 2GB log. That was limiting at 64MB of log space used, so
the active CIL size is only about 3% of the total log in that case.
The concurrent removal of those files did not trigger the background
sleep at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The current CIL size aggregation limit is 1/8th the log size. This
means for large logs we might be aggregating at least 250MB of dirty objects
in memory before the CIL is flushed to the journal. With CIL shadow
buffers sitting around, this means the CIL is often consuming >500MB
of temporary memory that is all allocated under GFP_NOFS conditions.
Flushing the CIL can take some time to do if there is other IO
ongoing, and can introduce substantial log force latency by itself.
It also pins the memory until the objects are in the AIL and can be
written back and reclaimed by shrinkers. Hence this threshold also
tends to determine the minimum amount of memory XFS can operate in
under heavy modification without triggering the OOM killer.
Modify the CIL space limit to prevent such huge amounts of pinned
metadata from aggregating. We can have 2MB of log IO in flight at
once, so limit aggregation to 16x this size. This threshold was
chosen as it little impact on performance (on 16-way fsmark) or log
traffic but pins a lot less memory on large logs especially under
heavy memory pressure. An aggregation limit of 8x had 5-10%
performance degradation and a 50% increase in log throughput for
the same workload, so clearly that was too small for highly
concurrent workloads on large logs.
This was found via trace analysis of AIL behaviour. e.g. insertion
from a single CIL flush:
xfs_ail_insert: old lsn 0/0 new lsn 1/3033090 type XFS_LI_INODE flags IN_AIL
$ grep xfs_ail_insert /mnt/scratch/s.t |grep "new lsn 1/3033090" |wc -l
1721823
$
So there were 1.7 million objects inserted into the AIL from this
CIL checkpoint, the first at 2323.392108, the last at 2325.667566 which
was the end of the trace (i.e. it hadn't finished). Clearly a major
problem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Separate out the unmount record writing from the rest of the
ticket and log state futzing necessary to make it work. This is
a no-op, just makes the code cleaner and places the unmount record
formatting and writing alongside the commit record formatting and
writing code.
We can also get rid of the ticket flag clearing before the
xlog_write() call because it no longer cares about the state of
XLOG_TIC_INITED.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove xlog_ticket_done and just call the renamed low-level helpers for
ungranting or regranting log space directly. To make that a little
the reference put on the ticket and all tracing is moved into the actual
helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_log_done() does two separate things. Firstly, it triggers commit
records to be written for permanent transactions, and secondly it
releases or regrants transaction reservation space.
Since delayed logging was introduced, transactions no longer write
directly to the log, hence they never have the XLOG_TIC_INITED flag
cleared on them. Hence transactions never write commit records to
the log and only need to modify reservation space.
Split up xfs_log_done into two parts, and only call the parts of the
operation needed for the context xfs_log_done() is currently being
called from.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Commit and unmount records records do not need start records to be
written, so rearrange the logic in xlog_write() to remove the need
to check for XLOG_TIC_INITED to determine if we should account for
the space used by a start record.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The xlog_write() function iterates over iclogs until it completes
writing all the log vectors passed in. The ticket tracks whether
a start record has been written or not, so only the first iclog gets
a start record. We only ever pass single use tickets to
xlog_write() so we only ever need to write a start record once per
xlog_write() call.
Hence we don't need to store whether we should write a start record
in the ticket as the callers provide all the information we need to
determine if a start record should be written. For the moment, we
have to ensure that we clear the XLOG_TIC_INITED appropriately so
the code in xfs_log_done() still works correctly for committing
transactions.
(darrick: Note the slight behavior change that we always deduct the
size of the op header from the ticket, even for unmount records)
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[hch: pass an explicit need_start_rec argument]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Validate the geometry of the realtime geometry when we mount the
filesystem, so that we don't abruptly shut down the filesystem later on.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Cleanup io_alloc_async_ctx() a bit, add a new __io_alloc_async_ctx(),
so io_setup_async_rw() won't need to check whether async_ctx is true
or false again.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When it's probing all of a fileserver's interfaces to find which one is
best to use, afs_do_probe_fileserver() takes a lock on the server record
and notes the pointer to the address list.
It doesn't, however, pin the address list, so as soon as it drops the
lock, there's nothing to stop the address list from being freed under
us.
Fix this by taking a ref on the address list inside the locked section
and dropping it at the end of the function.
Fixes: 3bf0fb6f33 ("afs: Probe multiple fileservers simultaneously")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ceph fixes from Ilya Dryomov:
"A patch for a rather old regression in fullness handling and two
memory leak fixes, marked for stable"
* tag 'ceph-for-5.6-rc8' of git://github.com/ceph/ceph-client:
ceph: fix memory leak in ceph_cleanup_snapid_map()
libceph: fix alloc_msg_with_page_vector() memory leaks
ceph: check POOL_FLAG_FULL/NEARFULL in addition to OSDMAP_FULL/NEARFULL
I noticed that fsfreeze can take a very long time to freeze an XFS if
there happens to be a GETFSMAP caller running in the background. I also
happened to notice the following in dmesg:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 43492 at fs/xfs/xfs_super.c:853 xfs_quiesce_attr+0x83/0x90 [xfs]
Modules linked in: xfs libcrc32c ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 ip_set_hash_ip ip_set_hash_net xt_tcpudp xt_set ip_set_hash_mac ip_set nfnetlink ip6table_filter ip6_tables bfq iptable_filter sch_fq_codel ip_tables x_tables nfsv4 af_packet [last unloaded: xfs]
CPU: 2 PID: 43492 Comm: xfs_io Not tainted 5.6.0-rc4-djw #rc4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:xfs_quiesce_attr+0x83/0x90 [xfs]
Code: 7c 07 00 00 85 c0 75 22 48 89 df 5b e9 96 c1 00 00 48 c7 c6 b0 2d 38 a0 48 89 df e8 57 64 ff ff 8b 83 7c 07 00 00 85 c0 74 de <0f> 0b 48 89 df 5b e9 72 c1 00 00 66 90 0f 1f 44 00 00 41 55 41 54
RSP: 0018:ffffc900030f3e28 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff88802ac54000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff81e4a6f0 RDI: 00000000ffffffff
RBP: ffff88807859f070 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000010 R12: 0000000000000000
R13: ffff88807859f388 R14: ffff88807859f4b8 R15: ffff88807859f5e8
FS: 00007fad1c6c0fc0(0000) GS:ffff88807e000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0c7d237000 CR3: 0000000077f01003 CR4: 00000000001606a0
Call Trace:
xfs_fs_freeze+0x25/0x40 [xfs]
freeze_super+0xc8/0x180
do_vfs_ioctl+0x70b/0x750
? __fget_files+0x135/0x210
ksys_ioctl+0x3a/0xb0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x50/0x1a0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
These two things appear to be related. The assertion trips when another
thread initiates a fsmap request (which uses an empty transaction) after
the freezer waited for m_active_trans to hit zero but before the the
freezer executes the WARN_ON just prior to calling xfs_log_quiesce.
The lengthy delays in freezing happen because the freezer calls
xfs_wait_buftarg to clean out the buffer lru list. Meanwhile, the
GETFSMAP caller is continuing to grab and release buffers, which means
that it can take a very long time for the buffer lru list to empty out.
We fix both of these races by calling sb_start_write to obtain freeze
protection while using empty transactions for GETFSMAP and for metadata
scrubbing. The other two users occur during mount, during which time we
cannot fs freeze.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If the bio_add_page() call fails, we proceed to write out a
partially constructed log buffer. This corrupts the physical log
such that log recovery is not possible. Worse, persistent
occurrences of this error eventually lead to a BUG_ON() failure in
bio_split() as iclogs wrap the end of the physical log, which
triggers log recovery on subsequent mount.
Rather than warn about writing out a corrupted log buffer, shutdown
the fs as is done for any log I/O related error. This preserves the
consistency of the physical log such that log recovery succeeds on a
subsequent mount. Note that this was observed on a 64k page debug
kernel without upstream commit 59bb47985c ("mm, sl[aou]b:
guarantee natural alignment for kmalloc(power-of-two)"), which
demonstrated frequent iclog bio overflows due to unaligned (slab
allocated) iclog data buffers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we're checking bestfree information in directory blocks, always
drop the block buffer at the end of the function. We should always
release resources when we're done using them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The dirattr btree checking code uses the altpath substructure of the
dirattr state structure to check the sibling pointers of dir/attr tree
blocks. At the end of sibling checks, xfs_da3_path_shift could have
changed multiple levels of buffer pointers in the altpath structure.
Although we release the leaf level buffer, this isn't enough -- we also
need to release the node buffers that are unique to the altpath.
Not releasing all of the altpath buffers leaves them locked to the
transaction. This is suboptimal because we should release resources
when we don't need them anymore. Fix the function to loop all levels of
the altpath, and fix the return logic so that we always run the loop.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
