The GeekBox contains an MXM3 module with a Rockchip RK3368 SoC.
Some connectors are available directly on the module.
This adds initial support, namely serial, USB, GMAC, eMMC, IR and TSADC.
Change-Id: Ic9956b3b935467e3492bdab274579d4cd038d4e6
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
(cherry picked from commit fd7b980c9e)
This adds mailbox device nodes in dts.
Mailbox is used by the Rockchip CPU cores to communicate
requests to MCU processor.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
(cherry picked from commit 6e7f9f5ad5)
Change-Id: I9b93b2b3c28ca686c297d839077df5d725436f2f
This patch fixes the incorrect Over-temperature protection pin.
since the rk3368 io list said the otp pin is gpio0a3.
Anyway, that should be fixed in here.
Change-Id: I0b868b6a2e1aac3eea21d6de4787b169a53ade5e
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
(cherry picked from commit 04317584ff)
Add tuning clk for emmc and sdmmc, otherwise I get
the following failure while enabling mmc-hs200-1_8v.
dwmmc_rockchip ff0f0000.dwmmc: Tuning clock (sample_clk) not defined.
mmc0: tuning execution failed
mmc0: error -5 whilst initialising MMC card
With it
dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to 170
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 M8G1GC 7.28 GiB
Change-Id: I14534f43249edecbb8239f4a86c808ebb7f0a959
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
(cherry picked from commit 90191625ec)
There is a need of a broadcast timer in this case to ensure proper
wakeup when the cpus are in sleep mode and a timer expires.
Change-Id: I8ab0e5506420e2650acc1dac4d5667f40c0d3b4f
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
(cherry picked from commit b8084e5b34)
The card detect pin is currently called sdmcc-cd.
This patch fixes the typo and renames the pin to sdmmc-cd.
Change-Id: I47ac2767ea442764bf71411ebd66de56e9c1e934
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
(cherry picked from commit 8fc5abd40e)
In general, the logic voltage is affected by ddr frequency factors.
We should fix the correct voltage range since assuemd that we have the
ddr frequency driver in mainline.
AFAIK, the 1.8v voltage is used by the SD3.0 card.
Change-Id: Id0ae87c7ec6d3d757fdde0b85caf1f535d200222
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
(cherry picked from commit 87ac9de3b4)
This board is similar with the rk3288 evb board but the rk3368 top
board. There exist the act8846 as the pmic.
Moment, add the balight/thermal/emmc/usb.. stuff,
Let the board can happy work.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
(cherry picked from commit 5378e28c97)
Change-Id: I78f39fa080d221e06849285b6a0c52bc04d5d1a9
This patch add the thermal needed info on RK3368.
Meanwhile, support the trips to throttle for thermal.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
(cherry picked from commit f990238f85)
Change-Id: I76ba5230b1a334562ce7607aa02fec445612070c
Add an ethernet0 alias for the RK3368 mac interface so
that u-boot can find the device-node and fill in the mac address on
boards that support a wired network interface.
Change-Id: I2f82939290a0807ed84a3e93f6b0eef879cce076
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
(cherry picked from commit ff08868ef0)
RK808_ID_DCDC1 is 0, no need to do subtract RK808_ID_DCDC1.
Change-Id: I395c30866aeb5c4c285dd083109a70bfef24bfca
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit bf8e27621e)
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Add support for the rk818 regulator. The regulator module consists
of 4 DCDCs, 9 LDOs, 1 switch and 1 BOOST converter which is used to
power OTG and HDMI5V.
The output voltages are configurable and are meant to supply power
to the main processor and other components.
Change-Id: I129a1f22c65684615e9ae792efaa880555f0235e
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
(cherry picked from commit 1137529353)
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
The field "owner" is set by core. Thus delete an extra initialisation.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: I7a2e347e07943c7eb5b2c9cae4eae2358a613e0e
(cherry picked from commit 556ae220ac)
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
A common simplified DT parsing code for regulators was introduced in
commit a0c7b164ad ("regulator: of: Provide simplified DT parsing
method")
While at it also added RK8XX_DESC and RK8XX_DESC_SWITCH macros for the
regulator_desc struct initialization. This just makes the driver more compact.
Change-Id: I5c1211decf37d27a68167be9b6354834532cc87b
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit 9e9daa0a67)
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
LDO_REG3 descriptor is using linear_ranges.
Add and use proper ops for LDO_REG3.
Change-Id: Iad515fd23e7b3bca6248739a54335a71eed01238
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit 129d7cf98f)
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
After removing all uses of the range operations in a recent patch,
we get a warning about the symbol not being referenced anywhere:
drivers/regulator/rk808-regulator.c:306:29: 'rk808_reg_ops_ranges' defined but not used
This removes the now-unused structure along with the
rk808_set_suspend_voltage_range function that is only referenced from
rk808_reg_ops_ranges.
Fixes: afcd666d9d ("regulator: rk808: remove linear range definitions with a single range")
Change-Id: I565c91186ab5d7457a62b3bc4b4896a08f39dd2e
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit 4a5ed8c1ad)
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
The driver was using only linear ranges. Now we remove linear range
definitions with a single range. So we have to add an ops struct for
ranges and adjust all other ops functions accordingly.
Change-Id: I6b2dd5e035832f9460ec8a24b5214204f7a930b7
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit afcd666d9d)
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
default enable rkvdec and vpu.
rga is default on, remove duplicate configuration.
Change-Id: I8375b2202a81977238e8120e1c2d60f2130844b5
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
Adds parsing for HDMI 2.0 'HDMI Forum Vendor
Specific Data Block'. This block is present in
some HDMI 2.0 EDID's and gives information about
scrambling support, SCDC, 3D Views, and others.
Parsed parameters are stored in drm_connector
structure.
(am from: https://patchwork.kernel.org/patch/9273645)
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Change-Id: I5a1485b79a407fd27ac4754827de318175bb8f6a
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
SCDC is a mechanism defined in the HDMI 2.0 specification that allows
the source and sink devices to communicate.
This commit introduces helpers to access the SCDC and provides the
symbolic names for the various registers defined in the specification.
(am from: https://patchwork.kernel.org/patch/7258251/)
Change-Id: I378bc2b465a720ccfede35a93bce0d9371e78f78
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
adjusted_mode.crtc_clock is the real pixel clock rate.
Change-Id: Iac242b89e3144bc53c40170c2cec0c0913ef6ee0
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
NFS is a important feature and should be enabled.
Change-Id: Ibc3794bd31f9ddad94af7d3c06d5569fe6feeaf8
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
NFS is a important feature and should be enabled.
Change-Id: If38086293c47e038fa605a013786465a466f107a
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
If DP and HDMI are enabled at the same board, they will be
register switchdev with the same name in the same directory.
This would cause register switchdev fail.
Resulting in the following error:
[ 0.882415] [<ffffff8008212044>] sysfs_warn_dup+0x60/0x7c
[ 0.882424] [<ffffff800821212c>] sysfs_create_dir_ns+0x74/0x94
[ 0.882436] [<ffffff8008359fc0>] kobject_add_internal+0xc8/0x290
[ 0.882446] [<ffffff800835a428>] kobject_add+0xe0/0x10c
[ 0.882454] [<ffffff80084c2874>] device_add+0xec/0x508
[ 0.882462] [<ffffff80084c2e3c>] device_create_groups_vargs+0xb4/0xf8
[ 0.882471] [<ffffff80084c2eac>] device_create_vargs+0x2c/0x34
[ 0.882479] [<ffffff80084c2f14>] device_create+0x60/0x80
[ 0.882491] [<ffffff80087248bc>] switch_dev_register+0x8c/0x120
[ 0.882502] [<ffffff80084709ec>] cdn_dp_bind+0x4c4/0x644
[ 0.882511] [<ffffff80084c091c>] component_bind_all+0x94/0x1c0
[ 0.882523] [<ffffff8008478550>] rockchip_drm_bind+0x1c4/0xb54
[ 0.882533] [<ffffff80084c0554>] try_to_bring_up_master.part.3+0xac/0x114
[ 0.882542] [<ffffff80084c0780>] component_add+0x88/0xf8
[ 0.882550] [<ffffff8008470504>] cdn_dp_probe+0x140/0x164
[ 0.882559] [<ffffff80084c71f8>] platform_drv_probe+0x58/0xa4
[ 0.882568] [<ffffff80084c5498>] driver_probe_device+0x118/0x2ac
[ 0.882576] [<ffffff80084c5778>] __device_attach_driver+0x88/0x98
[ 0.882584] [<ffffff80084c38a0>] bus_for_each_drv+0x7c/0xac
[ 0.882592] [<ffffff80084c52cc>] __device_attach+0xa4/0x124
[ 0.882600] [<ffffff80084c58e4>] device_initial_probe+0x10/0x18
[ 0.882609] [<ffffff80084c4924>] bus_probe_device+0x2c/0x8c
[ 0.882617] [<ffffff80084c4da0>] deferred_probe_work_func+0x74/0xa0
[ 0.882628] [<ffffff80080b2b38>] process_one_work+0x218/0x3e0
[ 0.882636] [<ffffff80080b3538>] worker_thread+0x2e8/0x404
[ 0.882644] [<ffffff80080b7e70>] kthread+0xe8/0xf0
[ 0.882653] [<ffffff8008082690>] ret_from_fork+0x10/0x40
[ 0.882675] kobject_add_internal failed for hdmi with -EEXIST, don't try to
register things with the same name in the same directory.
Change-Id: I0c1b175a2483d5524d9cc0e5261d332c5ad286c8
Signed-off-by: Bin Yang <yangbin@rock-chips.com>
