The userspace might need some sort of cache coherency management e.g. when CPU
and GPU domains are being accessed through dma-buf at the same time. To
circumvent this problem there are begin/end coherency markers, that forward
directly to existing dma-buf device drivers vfunc hooks. Userspace can make use
of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence would be
used like following:
- mmap dma-buf fd
- for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write
to mmap area 3. SYNC_END ioctl. This can be repeated as often as you
want (with the new data being consumed by the GPU or say scanout device)
- munmap once you don't need the buffer any more
BackPort:
upstream kernel change dma-buf api with the commit(831e9da
dma-buf: Remove range-based flush), avoid effect too much to
current kernel, Just compatible dma-buf api to current version.
v2 (Tiago): Fix header file type names (u64 -> __u64)
v3 (Tiago): Add documentation. Use enum dma_buf_sync_flags to the begin/end
dma-buf functions. Check for overflows in start/length.
v4 (Tiago): use 2d regions for sync.
v5 (Tiago): forget about 2d regions (v4); use _IOW in DMA_BUF_IOCTL_SYNC and
remove range information from struct dma_buf_sync.
v6 (Tiago): use __u64 structured padded flags instead enum. Adjust
documentation about the recommendation on using sync ioctls.
v7 (Tiago): Alex' nit on flags definition and being even more wording in the
doc about sync usage.
v9 (Tiago): remove useless is_dma_buf_file check. Fix sync.flags conditionals
and its mask order check. Add <linux/types.h> include in dma-buf.h.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455228291-29640-1-git-send-email-tiago.vignatti@intel.com
(cherry picked from commit c11e391da2)
Change-Id: I92916babe7fb0ab3bf3ce9dc966408f2e05fe83d
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
With the atomic API, it is possible that a single commit affects
multiple crtcs. If the user requests an event with that commit, one
event will be sent for each CRTC, but it is not possible to distinguish
which crtc an event is for in user space. To solve this, the reserved
field in struct drm_vblank_event is repurposed to include the crtc_id
which the event is for.
The DRM_CAP_CRTC_IN_VBLANK_EVENT is added to allow userspace to query if
the crtc field will be set properly.
[daniels: Rebased, using Maarten's forward-port.]
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Maarten Lankhorst <maarten.lankhorst@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
(am from https://patchwork.kernel.org/patch/9662099/)
Change-Id: Ibe6949782e5df5363d4eaa3e98b3ff413239cf26
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
* linux-linaro-lsk-v4.4-android: (521 commits)
Linux 4.4.66
ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram
ARCv2: save r30 on kernel entry as gcc uses it for code-gen
nfsd: check for oversized NFSv2/v3 arguments
Input: i8042 - add Clevo P650RS to the i8042 reset list
p9_client_readdir() fix
MIPS: Avoid BUG warning in arch_check_elf
MIPS: KGDB: Use kernel context for sleeping threads
ALSA: seq: Don't break snd_use_lock_sync() loop by timeout
ALSA: firewire-lib: fix inappropriate assignment between signed/unsigned type
ipv6: check raw payload size correctly in ioctl
ipv6: check skb->protocol before lookup for nexthop
macvlan: Fix device ref leak when purging bc_queue
ip6mr: fix notification device destruction
netpoll: Check for skb->queue_mapping
net: ipv6: RTF_PCPU should not be settable from userspace
dp83640: don't recieve time stamps twice
tcp: clear saved_syn in tcp_disconnect()
sctp: listen on the sock only when it's state is listening or closed
net: ipv4: fix multipath RTM_GETROUTE behavior when iif is given
...
Conflicts:
drivers/usb/dwc3/gadget.c
include/linux/usb/quirks.h
Change-Id: I490f766b9a530b10da3107e20709538e4536a99d
[ Upstream commit 557c44be91 ]
Andrey reported a fault in the IPv6 route code:
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff880069809600 task.stack: ffff880062dc8000
RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975
RSP: 0018:ffff880062dced30 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006
RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018
RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000
FS: 00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0
Call Trace:
ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128
ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212
...
Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit
set. Flags passed to the kernel are blindly copied to the allocated
rt6_info by ip6_route_info_create making a newly inserted route appear
as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set
and expects rt->dst.from to be set - which it is not since it is not
really a per-cpu copy. The subsequent call to __ip6_dst_alloc then
generates the fault.
Fix by checking for the flag and failing with EINVAL.
Fixes: d52d3997f8 ("ipv6: Create percpu rt6_info")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The buffer have been accessed by CPU needs to be synced
for the device to see the most up-to-date.
So introduce a flag here to see if a buffer need flush cache.
Change-Id: I68457aa528d04acc6f92dfa2171d8c807ab657a6
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
This commit adds a new sysctl accept_ra_rt_info_min_plen that
defines the minimum acceptable prefix length of Route Information
Options. The new sysctl is intended to be used together with
accept_ra_rt_info_max_plen to configure a range of acceptable
prefix lengths. It is useful to prevent misconfigurations from
unintentionally blackholing too much of the IPv6 address space
(e.g., home routers announcing RIOs for fc00::/7, which is
incorrect).
[backport of net-next bbea124bc9]
Bug: 33333670
Test: net_test passes
Signed-off-by: Joel Scherpelz <jscherpelz@google.com>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
binder_fd_array_object starts with a 4-byte header,
followed by a few fields that are 8 bytes when
ANDROID_BINDER_IPC_32BIT=N.
This can cause alignment issues in a 64-bit kernel
with a 32-bit userspace, as on x86_32 an 8-byte primitive
may be aligned to a 4-byte address. Pad with a __u32
to fix this.
Change-Id: I4374ed2cc3ccd3c6a1474cb7209b53ebfd91077b
Signed-off-by: Martijn Coenen <maco@android.com>
(cherry picked from commit 651be3cb08)
We only support breakpoint/watchpoint of length 1, 2, 4 and 8. If we can
support other length as well, then user may watch more data with less
number of watchpoints (provided hardware supports it). For example: if we
have to watch only 4th, 5th and 6th byte from a 64 bit aligned address, we
will have to use two slots to implement it currently. One slot will watch a
half word at offset 4 and other a byte at offset 6. If we can have a
watchpoint of length 3 then we can watch it with single slot as well.
ARM64 hardware does support such functionality, therefore adding these new
definitions in generic layer.
Signed-off-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Pavel Labath <labath@google.com>
[pavel: tools/include/uapi/linux/hw_breakpoint.h is not present in this branch]
Change-Id: Ie17ed89ca526e4fddf591bb4e556fdfb55fc2eac
Bug: 30919905
[ Upstream commit 745cb7f8a5 ]
Replace MAX_ADDR_LEN with its numeric value to fix the following
linux/packet_diag.h userspace compilation error:
/usr/include/linux/packet_diag.h:67:17: error: 'MAX_ADDR_LEN' undeclared here (not in a function)
__u8 pdmc_addr[MAX_ADDR_LEN];
This is not the first case in the UAPI where the numeric value
of MAX_ADDR_LEN is used instead of symbolic one, uapi/linux/if_link.h
already does the same:
$ grep MAX_ADDR_LEN include/uapi/linux/if_link.h
__u8 mac[32]; /* MAX_ADDR_LEN */
There are no UAPI headers besides these two that use MAX_ADDR_LEN.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1b4c689d4 upstream.
mmapped netlink has a number of unresolved issues:
- TX zerocopy support had to be disabled more than a year ago via
commit 4682a03586 ("netlink: Always copy on mmap TX.")
because the content of the mmapped area can change after netlink
attribute validation but before message processing.
- RX support was implemented mainly to speed up nfqueue dumping packet
payload to userspace. However, since commit ae08ce0021
("netfilter: nfnetlink_queue: zero copy support") we avoid one copy
with the socket-based interface too (via the skb_zerocopy helper).
The other problem is that skbs attached to mmaped netlink socket
behave different from normal skbs:
- they don't have a shinfo area, so all functions that use skb_shinfo()
(e.g. skb_clone) cannot be used.
- reserving headroom prevents userspace from seeing the content as
it expects message to start at skb->head.
See for instance
commit aa3a022094 ("netlink: not trim skb for mmaped socket when dump").
- skbs handed e.g. to netlink_ack must have non-NULL skb->sk, else we
crash because it needs the sk to check if a tx ring is attached.
Also not obvious, leads to non-intuitive bug fixes such as 7c7bdf359
("netfilter: nfnetlink: use original skbuff when acking batches").
mmaped netlink also didn't play nicely with the skb_zerocopy helper
used by nfqueue and openvswitch. Daniel Borkmann fixed this via
commit 6bb0fef489 ("netlink, mmap: fix edge-case leakages in nf queue
zero-copy")' but at the cost of also needing to provide remaining
length to the allocation function.
nfqueue also has problems when used with mmaped rx netlink:
- mmaped netlink doesn't allow use of nfqueue batch verdict messages.
Problem is that in the mmap case, the allocation time also determines
the ordering in which the frame will be seen by userspace (A
allocating before B means that A is located in earlier ring slot,
but this also means that B might get a lower sequence number then A
since seqno is decided later. To fix this we would need to extend the
spinlocked region to also cover the allocation and message setup which
isn't desirable.
- nfqueue can now be configured to queue large (GSO) skbs to userspace.
Queing GSO packets is faster than having to force a software segmentation
in the kernel, so this is a desirable option. However, with a mmap based
ring one has to use 64kb per ring slot element, else mmap has to fall back
to the socket path (NL_MMAP_STATUS_COPY) for all large packets.
To use the mmap interface, userspace not only has to probe for mmap netlink
support, it also has to implement a recv/socket receive path in order to
handle messages that exceed the size of an rx ring element.
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ken-ichirou MATSUZAWA <chamaken@gmail.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Shi Yuejie <shiyuejie@outlook.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When doing a atomic commit affecting multiple crtc's, multiple events
are generated. The user_data member does not allow you to distinguish,
because they all have the same pointer.
I've chosen to use crtc_id, because using pipe would create ambiguity
when pipe = 0. A test for != 0 is easier to implement, and crtc_id
will never be 0.
Change-Id: Ie2daba50f711f298872f15498b8d46dedb38c0ff
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
(am from https://patchwork.kernel.org/patch/9272895/)
Since bits[19:22] have been used for picture aspect ratio
in upstream patch 876f43c073.
We define YCbCr420 flag to the subsequent bits.
Change-Id: I2eff8b51227fc7beb4f587e90bc070ae865ba9d4
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
HDMI 2.0 introduces a new sampling mode called YCbCr 4:2:0.
According to the spec the EDID may contain two blocks that
signal this sampling mode:
- YCbCr 4:2:0 Video Data Block
- YCbCr 4:2:0 Video Capability Map Data Block
The video data block contains the list of vic's were
only YCbCr 4:2:0 sampling mode shall be used while the
video capability map data block contains a mask were
YCbCr 4:2:0 sampling mode may be used.
This RFC patch adds support for parsing these two new blocks
and introduces new flags to signal the drivers if the
mode is 4:2:0'only or 4:2:0'able.
The reason this is still a RFC is because there is no
reference in kernel for this new sampling mode (specially in
AVI infoframe part), so, I was hoping to hear some feedback
first.
Tested in a HDMI 2.0 compliance scenario.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
(am from https://patchwork.kernel.org/patch/9495175)
Change-Id: I7c9e331b5bf5f1fbcefd4368bc4b82ff180eb91e
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Sdcardfs uses the same magic value as wrapfs.
This should not be the case. As it is entirely
in memory, the value can be changed without any
loss of compatibility.
Change-Id: I24200b805d5e6d32702638be99e47d50d7f2f746
Signed-off-by: Daniel Rosenberg <drosen@google.com>
* linux-linaro-lsk-v4.4-android: (199 commits)
Linux 4.4.41
net: mvpp2: fix dma unmapping of TX buffers for fragments
sg_write()/bsg_write() is not fit to be called under KERNEL_DS
kconfig/nconf: Fix hang when editing symbol with a long prompt
target/user: Fix use-after-free of tcmu_cmds if they are expired
powerpc: Convert cmp to cmpd in idle enter sequence
powerpc/ps3: Fix system hang with GCC 5 builds
nfs_write_end(): fix handling of short copies
libceph: verify authorize reply on connect
PCI: Check for PME in targeted sleep state
Input: drv260x - fix input device's parent assignment
media: solo6x10: fix lockup by avoiding delayed register write
IB/cma: Fix a race condition in iboe_addr_get_sgid()
IB/multicast: Check ib_find_pkey() return value
IPoIB: Avoid reading an uninitialized member variable
IB/mad: Fix an array index check
fgraph: Handle a case where a tracer ignores set_graph_notrace
platform/x86: asus-nb-wmi.c: Add X45U quirk
ftrace/x86_32: Set ftrace_stub to weak to prevent gcc from using short jumps to it
kvm: nVMX: Allow L1 to intercept software exceptions (#BP and #OF)
...
Change-Id: I8c8467700d5563d9a1121c982737ff0ab6d9cdc9
- Define a new FIB rule attributes, FRA_UID_RANGE, to describe a
range of UIDs.
- Define a RTA_UID attribute for per-UID route lookups and dumps.
- Support passing these attributes to and from userspace via
rtnetlink. The value INVALID_UID indicates no UID was
specified.
- Add a UID field to the flow structures.
Bug: 16355602
Change-Id: Iea98e6fedd0fd4435a1f4efa3deb3629505619ab
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* linux-linaro-lsk-v4.4-android: (61 commits)
Linux 4.4.36
scsi: mpt3sas: Unblock device after controller reset
flow_dissect: call init_default_flow_dissectors() earlier
mei: fix return value on disconnection
mei: me: fix place for kaby point device ids.
mei: me: disable driver on SPT SPS firmware
drm/radeon: Ensure vblank interrupt is enabled on DPMS transition to on
mpi: Fix NULL ptr dereference in mpi_powm() [ver #3]
parisc: Also flush data TLB in flush_icache_page_asm
parisc: Fix race in pci-dma.c
parisc: Fix races in parisc_setup_cache_timing()
NFSv4.x: hide array-bounds warning
apparmor: fix change_hat not finding hat after policy replacement
cfg80211: limit scan results cache size
tile: avoid using clocksource_cyc2ns with absolute cycle count
scsi: mpt3sas: Fix secure erase premature termination
Fix USB CB/CBI storage devices with CONFIG_VMAP_STACK=y
USB: serial: ftdi_sio: add support for TI CC3200 LaunchPad
USB: serial: cp210x: add ID for the Zone DPMX
usb: chipidea: move the lock initialization to core file
...
With major controllers - cpu, memory and io - shaping up for the
unified hierarchy, cgroup2 is about ready to be, gradually, released
into the wild. Replace __DEVEL__sane_behavior flag which was used to
select the unified hierarchy with a separate filesystem type "cgroup2"
so that unified hierarchy can be mounted as follows.
mount -t cgroup2 none $MOUNT_POINT
The cgroup2 fs has its own magic number - 0x63677270 ("cgrp").
v2: Assign a different magic number to cgroup2 fs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
(cherry picked from commit 67e9c74b8a)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
drm_format_plane_cpp use byte size, not works for 10bit
format, use drm_format_plane_bpp instead.
Change-Id: If1a6ca1c286747fdc868184cebe75eb0af0a746d
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
This patch introduces a new binder_fd_array object,
that allows us to support one or more file descriptors
embedded in a buffer that is scatter-gathered.
Change-Id: I647a53cf0d905c7be0dfd9333806982def68dd74
Signed-off-by: Martijn Coenen <maco@google.com>
Previously all data passed over binder needed
to be serialized, with the exception of Binder
objects and file descriptors.
This patchs adds support for scatter-gathering raw
memory buffers into a binder transaction, avoiding
the need to first serialize them into a Parcel.
To remain backwards compatibile with existing
binder clients, it introduces two new command
ioctls for this purpose - BC_TRANSACTION_SG and
BC_REPLY_SG. These commands may only be used with
the new binder_transaction_data_sg structure,
which adds a field for the total size of the
buffers we are scatter-gathering.
Because memory buffers may contain pointers to
other buffers, we allow callers to specify
a parent buffer and an offset into it, to indicate
this is a location pointing to the buffer that
we are fixing up. The kernel will then take care
of fixing up the pointer to that buffer as well.
Change-Id: I02417f28cff14688f2e1d6fcb959438fd96566cc
Signed-off-by: Martijn Coenen <maco@google.com>
flat_binder_object is used for both handling
binder objects and file descriptors, even though
the two are mostly independent. Since we'll
have more fixup objects in binder in the future,
instead of extending flat_binder_object again,
split out file descriptors to their own object
while retaining backwards compatibility to
existing user-space clients. All binder objects
just share a header.
Change-Id: If3c55f27a2aa8f21815383e0e807be47895e4786
Signed-off-by: Martijn Coenen <maco@google.com>
[ Upstream commit 85dda4e5b0 ]
The offload flag is a status flag and should not be used by
FIB semantics for comparison.
Fixes: 37ed949369 ("rtnetlink: add RTNH_F_EXTERNAL flag for fib offload")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* linux-linaro-lsk-v4.4-android: (1362 commits)
Linux 4.4.30
Revert "fix minor infoleak in get_user_ex()"
Revert "x86/mm: Expand the exception table logic to allow new handling options"
Linux 4.4.29
ARM: pxa: pxa_cplds: fix interrupt handling
powerpc/nvram: Fix an incorrect partition merge
mpt3sas: Don't spam logs if logging level is 0
perf symbols: Fixup symbol sizes before picking best ones
perf symbols: Check symbol_conf.allow_aliases for kallsyms loading too
perf hists browser: Fix event group display
clk: divider: Fix clk_divider_round_rate() to use clk_readl()
clk: qoriq: fix a register offset error
s390/con3270: fix insufficient space padding
s390/con3270: fix use of uninitialised data
s390/cio: fix accidental interrupt enabling during resume
x86/mm: Expand the exception table logic to allow new handling options
dmaengine: ipu: remove bogus NO_IRQ reference
power: bq24257: Fix use of uninitialized pointer bq->charger
staging: r8188eu: Fix scheduling while atomic splat
ASoC: dapm: Fix kcontrol creation for output driver widget
...
AFBC is arm vendor format, it's a compressed format.
The AFBC format is supported by rk3399 vop big.
We know little about AFBC layout, hope to some guys can
fixme about the afbc comment.
Change-Id: I9b3edaeb8cc7ffb792820c2f9a60d91fd0c6c28b
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
(am from https://patchwork.kernel.org/patch/9324667/)
This adds the capability for a process that has CAP_NET_ADMIN on
a socket to see the socket mark in socket dumps.
Commit a52e95abf7 ("net: diag: allow socket bytecode filters to
match socket marks") recently gave privileged processes the
ability to filter socket dumps based on mark. This patch is
complementary: it ensures that the mark is also passed to
userspace in the socket's netlink attributes. It is useful for
tools like ss which display information about sockets.
[backport of net-next d545caca82]
Change-Id: I33336ed9c3ee3fb78fe05c4c47b7fd18c6e33ef1
Tested: https://android-review.googlesource.com/270210
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows a privileged process to filter by socket mark when
dumping sockets via INET_DIAG_BY_FAMILY. This is useful on
systems that use mark-based routing such as Android.
The ability to filter socket marks requires CAP_NET_ADMIN, which
is consistent with other privileged operations allowed by the
SOCK_DIAG interface such as the ability to destroy sockets and
the ability to inspect BPF filters attached to packet sockets.
[cherry-pick of a52e95abf7]
Change-Id: I8b90b814264d9808bda050cdba8f104943bdb9a8
Tested: https://android-review.googlesource.com/261350
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to inet_diag facility to filter sockets based on device
index. If an interface index is in the filter only sockets bound
to that index (sk_bound_dev_if) are returned.
[cherry-pick of net-next 637c841dd7]
Change-Id: I6b6bcdcf15d3142003f1ee53b4d82f2fabbb8250
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
in fs/proc/task_mmu.c:
looks like vma_get_anon_name() want have a name for anonymous
vma when there is no name used in vma. commit: 586278d78b
The name show is after any other names, so it maybe covered.
but anyway, it just a show here.
[ Upstream commit d5e26bb1d8 ]
Applications which use virtual LUN's that are backed by a physical LUN
over both adapter ports may experience an I/O failure in the event of a
link loss (e.g. cable pull).
Virtual LUNs may be accessed through one or both ports of the adapter.
This access is encoded in the translation entries that comprise the
virtual LUN and used by the AFU for load-balancing I/O and handling
failover scenarios. In a link loss scenario, even though the AFU is able
to maintain connectivity to the LUN, it is up to the application to
retry the failed I/O. When applications are unaware of the virtual LUN's
underlying topology, they are unable to make a sound decision of when to
retry an I/O and therefore are forced to make their reaction to a failed
I/O absolute. The result is either a failure to retry I/O or increased
latency for scenarios where a retry is pointless.
To remedy this scenario, provide feedback back to the application on
virtual LUN creation as to which ports the LUN may be accessed. LUN's
spanning both ports are candidates for a retry in a presence of an I/O
failure.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: Manoj Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
