Since scsi_get_device_flags_keyed() callers do not check whether or not
the returned value is an error code, change that function such that it
returns a flags value even if the 'key' argument is invalid. Note:
since commit 28a0bc4120 ("scsi: sd: Implement blacklist option for
WRITE SAME w/ UNMAP") bit 31 is a valid device information flag so
checking whether bit 31 is set in the return value is not sufficient to
tell the difference between an error code and a flags value.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A regression fix introduced a harmless type mismatch warning:
drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_im_bsg_vendor_request':
drivers/scsi/bfa/bfad_bsg.c:3137:35: error: initialization of 'struct bfad_im_port_s *' from 'long unsigned int' makes pointer from integer without a cast [-Werror=int-conversion]
struct bfad_im_port_s *im_port = shost->hostdata[0];
^~~~~
drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_im_bsg_els_ct_request':
drivers/scsi/bfa/bfad_bsg.c:3353:35: error: initialization of 'struct bfad_im_port_s *' from 'long unsigned int' makes pointer from integer without a cast [-Werror=int-conversion]
struct bfad_im_port_s *im_port = shost->hostdata[0];
This changes the code back to shost_priv() once more, but encapsulates
it in an inline function to document the rather unusual way of
using the private data only as a pointer to the previously allocated
structure.
I did not try to get rid of the extra indirection level entirely,
which would have been rather invasive and required reworking the entire
initialization sequence.
Fixes: 45349821ab ("scsi: bfa: fix access to bfad_im_port_s")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Before commit 0df21c86bd ("scsi: implement .get_budget and .put_budget
for blk-mq"), we run queue after 3ms if queue is idle and SCSI device
queue isn't ready, which is done in handling BLK_STS_RESOURCE. After
commit 0df21c86bd is introduced, queue won't be run any more under
this situation.
IO hang is observed when timeout happened, and this patch fixes the IO
hang issue by running queue after delay in scsi_dev_queue_ready, just
like non-mq. This issue can be triggered by the following script[1].
There is another issue which can be covered by running idle queue: when
.get_budget() is called on request coming from hctx->dispatch_list, if
one request just completes during .get_budget(), we can't depend on
SCSI's restart to make progress any more. This patch fixes the race too.
With this patch, we basically recover to previous behaviour (before
commit 0df21c86bd) of handling idle queue when running out of
resource.
[1] script for test/verify SCSI timeout
rmmod scsi_debug
modprobe scsi_debug max_queue=1
DEVICE=`ls -d /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/* | head -1 | xargs basename`
DISK_DIR=`ls -d /sys/block/$DEVICE/device/scsi_disk/*`
echo "using scsi device $DEVICE"
echo "-1" >/sys/bus/pseudo/drivers/scsi_debug/every_nth
echo "temporary write through" >$DISK_DIR/cache_type
echo "128" >/sys/bus/pseudo/drivers/scsi_debug/opts
echo none > /sys/block/$DEVICE/queue/scheduler
dd if=/dev/$DEVICE of=/dev/null bs=1M iflag=direct count=1 &
sleep 5
echo "0" >/sys/bus/pseudo/drivers/scsi_debug/opts
wait
echo "SUCCESS"
Fixes: 0df21c86bd ("scsi: implement .get_budget and .put_budget for blk-mq")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently on every submission, we recalculate the ELSP register offset
for the engine, after chasing the pointers to find the iomem base. Since
this is fixed for the lifetime of the driver, record the offset in the
execlists struct.
In practice the difference is negligible, it just happens to remove 27
bytes of eyesore pointer dancing from next to the hottest instruction
(which is itself due to stalling for a cache miss) in perf profiles of
the execlists_submission_tasklet().
v2: Trim off one more elsp local.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207222434.17686-1-chris@chris-wilson.co.uk
In quite a few places, we have a list iteration over the vma on an
object that only want to inspect GGTT vma. By construction, these are
placed at the start of the list, so we have copied that knowledge into
many callsites. Pull that knowledge back to i915_vma.h and provide a
for_each_ggtt_vma() to tidy up the code.
v2: Add a backreference from vma_create() to remind ourselves why we put
ggtt vma at the head of the obj->vma_list (and ppgtt vma at the tail).
v3: Fixup s/vma/V/
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207211407.31549-1-chris@chris-wilson.co.uk
[airlied: fix conflict in intel_dsi.c]
drm-intel-next-2017-12-01:
- Init clock gate fix (Ville)
- Execlists event handling corrections (Chris, Michel)
- Improvements on GPU Cache invalidation and context switch (Chris)
- More perf OA changes (Lionel)
- More selftests improvements and fixes (Chris, Matthew)
- Clean-up on modules parameters (Chris)
- Clean-up around old ringbuffer submission and hw semaphore on old platforms (Chris)
- More Cannonlake stabilization effort (David, James)
- Display planes clean-up and improvements (Ville)
- New PMU interface for perf queries... (Tvrtko)
- ... and other subsequent PMU changes and fixes (Tvrtko, Chris)
- Remove success dmesg noise from rotation (Chris)
- New DMC for Kabylake (Anusha)
- Fixes around atomic commits (Daniel)
- GuC updates and fixes (Sagar, Michal, Chris)
- Couple gmbus/i2c fixes (Ville)
- Use exponential backoff for all our wait_for() (Chris)
- Fixes for i915/fbdev (Chris)
- Backlight fixes (Arnd)
- Updates on shrinker (Chris)
- Make Hotplug enable more robuts (Chris)
- Disable huge pages (TPH) on lack of a needed workaround (Joonas)
- New GuC images for SKL, KBL, BXT (Sagar)
- Add HW Workaround for Geminilake performance (Valtteri)
- Fixes for PPS timings (Imre)
- More IPS fixes (Maarten)
- Many fixes for Display Port on gen2-gen4 (Ville)
- Retry GPU reset making the recover from hang more robust (Chris)
* tag 'drm-intel-next-2017-12-01' of git://anongit.freedesktop.org/drm/drm-intel: (101 commits)
drm/i915: Update DRIVER_DATE to 20171201
drm/i915/cnl: Mask previous DDI - PLL mapping
drm/i915: Remove unsafe i915.enable_rc6
drm/i915: Sleep and retry a GPU reset if at first we don't succeed
drm/i915: Interlaced DP output doesn't work on VLV/CHV
drm/i915: Pass crtc state to intel_pipe_{enable,disable}()
drm/i915: Wait for pipe to start on i830 as well
drm/i915: Fix vblank timestamp/frame counter jumps on gen2
drm/i915: Fix deadlock in i830_disable_pipe()
drm/i915: Fix has_audio readout for DDI A
drm/i915: Don't add the "force audio" property to DP connectors that don't support audio
drm/i915: Disable DP audio for g4x
drm/i915/selftests: Wake the device before executing requests on the GPU
drm/i915: Set fake_vma.size as well as fake_vma.node.size for capture
drm/i915: Tidy up signed/unsigned comparison
drm/i915: Enable IPS with only sprite plane visible too, v4.
drm/i915: Make ips_enabled a property depending on whether IPS is enabled, v3.
drm/i915: Avoid PPS HW/SW state mismatch due to rounding
drm/i915: Skip switch-to-kernel-context on suspend when wedged
drm/i915/glk: Apply WaProgramL3SqcReg1DefaultForPerf for GLK too
...
Simplify powercap_init() by reducing the number of redundant
assignments in it.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
[ rjw: Subject+changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
regression fix for vc4 + rpm stable fix for analogix bridge
* tag 'drm-misc-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc:
drm/bridge: analogix dp: Fix runtime PM state in get_modes() callback
drm/vc4: Fix false positive WARN() backtrace on refcount_inc() usage
- Fix for fd.o bug #103997 CNL eDP + HDMI causing a machine hard hang (James)
- Fix to allow suspending with a wedged GPU to hopefully unwedge it (Chris)
- Fix for Gen2 vblank timestap/frame counter jumps (Ville)
- Revert of a W/A for enabling FBC on CNL/GLK for certain images
and sizes (Rodrigo)
- Lockdep fix for i915 userptr code (Chris)
gvt-fixes-2017-12-06
- Fix invalid hw reg read value for vGPU (Xiong)
- Fix qemu warning on PCI ROM bar missing (Changbin)
- Workaround preemption regression (Zhenyu)
* tag 'drm-intel-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-intel:
Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk"
drm/i915: Call i915_gem_init_userptr() before taking struct_mutex
drm/i915/gvt: set max priority for gvt context
drm/i915/gvt: Don't mark vgpu context as inactive when preempted
drm/i915/gvt: Limit read hw reg to active vgpu
drm/i915/gvt: Export intel_gvt_render_mmio_to_ring_id()
drm/i915/gvt: Emulate PCI expansion ROM base address register
drm/i915/cnl: Mask previous DDI - PLL mapping
drm/i915: Fix vblank timestamp/frame counter jumps on gen2
drm/i915: Skip switch-to-kernel-context on suspend when wedged
UAPI Changes:
- Add "panel orientation" property to DRM to indicate orientation of the
panel vs the device's casing (Hans de Goede)
Core Changes:
- misc doc and bug fixes
Driver Changes:
- sun4i: Many improvements to the DE driver like multi-plane support and
YUV formats (Jernej Skrabec)
* tag 'drm-misc-next-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc: (50 commits)
drm/sun4i: Fix uninitialized variables in vi layer
drm/fb-helper: Fix potential NULL pointer dereference
gpu: drm: stm: Adopt SPDX identifiers
gpu: drm: sti: Adopt SPDX identifiers
drm/fsl-dcu: Use drm_mode_config_helper_suspend/resume()
drm/sun4i: Wire in DE2 YUV support
drm/sun4i: Expand DE2 scaler lib with YUV support
drm/sun4i: Add DE2 definitions for YUV formats
drm/sun4i: Add DE2 CSC library
drm/sun4i: Add CCSC property to DE2 configuration
drm/sun4i: Add support for HW scaling to DE2
drm/sun4i: Add scaler configuration to DE2 mixers
drm/sun4i: Add support for DE2 VI planes
drm/sun4i: Reorganize UI layer code in DE2
drm/sun4i: Add support for all HW supported DE2 RGB formats
drm/sun4i: Add multi plane support to DE2 driver
drm/sun4i: Move interlace related code in DE2
drm/sun4i: Move channel size related code in DE2
drm/sun4i: Move line width setting in DE2
drm/sun4i: Use values calculated by atomic check
...
No one has used it for the last two and half years (since it was
introduced by commit c36cf07176 (thermal: cpu_cooling: implement the
power cooling device API), get rid of it.
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
of_cpufreq_cooling_register() isn't used by anyone and so can be
removed, but then we would be left with two routines:
cpufreq_cooling_register() and of_cpufreq_power_cooling_register() that
would look odd.
Remove current implementation of of_cpufreq_cooling_register() and
rename of_cpufreq_power_cooling_register() as
of_cpufreq_cooling_register(). This simplifies lots of stuff.
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
All the callers of of_cpufreq_power_cooling_register() have almost
identical code and it makes more sense to move that code into the helper
as its all about reading DT properties.
This got rid of lot of redundant code.
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In __flush_qp(), the CQ ARMED bit was being cleared regardless of
whether any notification is actually needed. This resulted in the iser
termination logic getting stuck in ib_drain_sq() because the CQ was not
marked ARMED and thus the drain CQE notification wasn't triggered.
This new bug was exposed when this commit was merged:
commit cbb40fadd3 ("iw_cxgb4: only call the cq comp_handler when the
cq is armed")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Mistakenly the driver didn't allow RSS hash fields combinations which
involve both IPv4 and IPv6 protocols. This bug caused to failures for
user's use cases for RSS.
Consequently, this patch fixes this bug and allows any combination that
the HW can support.
Additionally, the patch fixes the driver to return an error in case the
user provides an unsupported mask for RSS hash fields.
Fixes: 3078f5f1bd ("IB/mlx4: Add support for RSS QP")
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Per the infiniband spec an SMI MAD can have any PKey. Checking the pkey
on SMI MADs is not necessary, and it seems that some older adapters
using the mthca driver don't follow the convention of using the default
PKey, resulting in false denials, or errors querying the PKey cache.
SMI MAD security is still enforced, only agents allowed to manage the
subnet are able to receive or send SMI MADs.
Reported-by: Chris Blake <chrisrblake93@gmail.com>
Cc: <stable@vger.kernel.org> # v4.12
Fixes: 47a2b338fe ("IB/core: Enforce security on management datagrams")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The alternate port number is used as an array index in the IB
security implementation, invalid values can result in a kernel panic.
Cc: <stable@vger.kernel.org> # v4.12
Fixes: d291f1a652 ("IB/core: Enforce PKey security on QPs")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The qmi_wwan minidriver support a 'raw-ip' mode where frames are
received without any ethernet header. This causes alignment issues
because the skbs allocated by usbnet are "IP aligned".
Fix by allowing minidrivers to disable the additional alignment
offset. This is implemented using a per-device flag, since the same
minidriver also supports 'ethernet' mode.
Fixes: 32f7adf633 ("net: qmi_wwan: support "raw IP" mode")
Reported-and-tested-by: Jay Foster <jay@systech.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a configuration option: CONFIG_NET_DSA_LEGACY allowing to compile out
support for the old platform device and Device Tree binding registration.
Support for these configurations is scheduled to be removed in 4.17.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MDIO busses need to be unregistered before they are freed,
otherwise BUG() is called. Add a call to the unregister code if the
registration fails, since we can have multiple busses, of which some
may correctly register before one fails. This requires moving the code
around a little.
Fixes: a3c53be55c ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When removing the interrupt handling code, we should mask the
generation of interrupts. The code however unmasked all
interrupts. This can then cause a new interrupt. We then get into a
deadlock where the interrupt thread is waiting to run, and the code
continues, trying to remove the interrupt handler, which means waiting
for the thread to complete. On a UP machine this deadlocks.
Fix so we really mask interrupts in the hardware. The same error is
made in the error path when install the interrupt handling code.
Fixes: 3460a5770c ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If clk_set_rate() fails, we should disable clk before return.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Branislav Radocaj <branislav@radocaj.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
add appropriate calls to clk_disable_unprepare() by jumping to out_mdio
in case orion_mdio_probe() returns -EPROBE_DEFER.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 3d604da1e9 ("net: mvmdio: get and enable optional clock")
Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some dual port NICs, the 2 ports have to be configured with compatible
link speeds. Under some conditions, a port's configured speed may no
longer be supported. The firmware will send a message to the driver
when this happens.
Improve this logic that prints out the warning by only printing it if
we can determine the link speed that is no longer supported. If the
speed is unknown or it is in autoneg mode, skip the warning message.
Reported-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Resolved all the missing a blank line after declarations checkpatch
warnings. Issue found by checkpatch.
Signed-off-by: Dhaval Shah <dhaval23031987@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is not necessary to check return value of class_register.
enclosure_init returns both successful and error value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sun6i_spi_probe() uses sun6i_spi_runtime_resume() to prepare/enable
clocks, so sun6i_spi_remove() should use sun6i_spi_runtime_suspend() to
disable/unprepare them if we're not suspended.
Replacing pm_runtime_disable() by pm_runtime_force_suspend() will ensure
that sun6i_spi_runtime_suspend() is called if needed.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 3558fe900e (spi: sunxi: Add Allwinner A31 SPI controller driver)
Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the SPDX tag is in all driver core files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
arch_topology.c had a SPDX tag in it, so move it to the top of the file
like the rest of the kernel files have it.
Also remove the redundant license text as it is not needed if the SPDX
tag is in the file, as the tag identifies the license in a specific and
legally-defined manner.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the driver core files files with the correct SPDX license
identifier based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This moves and renames the AMDGPU scheduler to a common location in DRM
in order to facilitate re-use by other drivers. This is mostly a straight
forward rename with no code changes.
One notable exception is the function to_drm_sched_fence(), which is no
longer a inline header function to avoid the need to export the
drm_sched_fence_ops_scheduled and drm_sched_fence_ops_finished structures.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function virtqueue_get_buf_ctx() could return NULL, the return
value 'buf' need to be checked with NULL, not value 'ctx'.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As mentioned at drivers/base/core.c:
/*
* NOTE: _Never_ directly free @dev after calling this function, even
* if it returned an error! Always use put_device() to give up the
* reference initialized in this function instead.
*/
so we don't free vm_dev until vm_dev.dev.release be called.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
At present, TCPM code assumes that local device supports
variable/batt pdos and always selects the pdo with highest
possible power within the board limit. This assumption
might not hold good for all devices. To overcome this,
this patch makes TCPM only accept a source_pdo when there is
a matching sink pdo.
For Fixed pdos: The voltage should match between the
incoming source_cap and the registered snk_pdo
For Variable/Batt pdos: The incoming source_cap voltage
range should fall within the registered snk_pdo's voltage
range.
Also, when the cap_mismatch bit is set, the max_power/current
should be set to the max_current/power of the sink_pdo.
This is according to:
"If the Capability Mismatch bit is set to one
The Maximum Operating Current/Power field may contain a value
larger than the maximum current/power offered in the Source
Capabilities message’s PDO as referenced by the Object position field.
This enables the Sink to indicate that it requires more current/power
than is being offered. If the Sink requires a different voltage this
will be indicated by its Sink Capabilities message.
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
