Ensure that the baud clock is also enabled for UART register writes in
driver resume. On Exynos5433 SoC this is needed to avoid external abort
issue.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 2d4dd0da45.
This broke earlycon on all Renesas ARM platforms using a SCIF port for the
serial console (R-Car, RZ/A1, RZ/G1, RZ/G2 SoCs), due to an incorrect value
of port->regshift.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some i.MX SoCs' low power mode, such as i.MX7D's LPSR(low power
state retention), UART iomux settings will be lost, need to add
pinctrl sleep/default mode switch during suspend/resume to make
sure UART iomux settings are correct after resume.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In noirq suspend/resume stage with no_console_suspend enabled,
imx_uart_console_write() may be called to print out log_buf
message by printk(), so there will be race condition between
imx_uart_console_write() and imx_uart_save/restore_context(),
need to add lock to protect the registers save/restore operations.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before the program enters the uart ISR, the local interrupt has been
disabled by the system, so it's not appropriate to use spin_lock_irqsave
interface in the ISR.
Signed-off-by: jun qian <hangdianqj@163.com>
Reviewed-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver console functions are using pointer to static array with fixed
size. There can be only one serial console at the time which is found
by register_console(). register_console() is filling cons->index to
port->line value.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
register_console is called twice once from
uart_add_one_port -> uart_configure_port
remove the double call
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move uart register to probe.
This is in preparation of removing the hardcoding of number of uarts.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The printk() in serial8250_interrupt() was once hidden behind a debug
macro in commit f4f653e987 ("serial: 8250, disable "too much work"
messages") and reverted back in commit 12de375ec4 ("Revert "serial:
8250, disable "too much work" messages"").
This was introduced first in 0.99.13k with the "serial" driver itself
(and called pass_number with a limit of 64 and no print). In 1.1.13 it
was renamed to pass_counter and the printk was behind #if 0. In 1.1.94
the limit of 64 was increased to 256 and hidden behind
RS_ISR_PASS_LIMIT. With this change the #if 0 turned into #if 1. It
slowly become what we have today with a loop limit of 512.
Usually, that printk isn't hit. However on KVM with a busy UART and
overloaded host it might happen. It is also likely with threaded
interrupts and a task which preempts the interrupt handler.
If the UART has (legitimate) work to do and we break out of the loop,
nothing changes: the interrupt is most likely already pending in the
interrupt controller and we end up in the handler anyway. This printk is
hardly helping.
Older kernels also had a comment saying that a bad configuration might
lead to this but I don't see how that should happen because a wrongly
configured interrupt number would let the handler leave "early" with
IRQ_NONE and the spurious detected will handle that (weill since 2.6.11,
before that we had no spurious detector). In that case, we would never
loop that often here.
This loop looks like an optimisation in order to pull the bytes from the
FIFO which were received while we were already here instead of waiting
for the interrupt. This might have been a good idea while the CPUs were
slow and FIFOs small.
There are other serial driver in tree, like the amba-pl*, which also
have this kind of a loop but without the printk (and were based on this
driver).
Remove the printk which might trigger in otherwise valid situtations.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's an error when compiled with restrict:
drivers/tty/serial/kgdboc.c: In function ‘configure_kgdboc’:
drivers/tty/serial/kgdboc.c:137:2: error: ‘strcpy’ source argument is the same
as destination [-Werror=restrict]
strcpy(config, opt);
^~~~~~~~~~~~~~~~~~~
As the error implies, this is from trying to use config as both source and
destination. Drop the call to the function where config is the argument
since nothing else happens in the function.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kgdboc_option_setup does not check input argument before passing it
to strlen. The argument would be a NULL pointer if "ekgdboc", without
its value, is set in command line and thus cause the following panic.
PANIC: early exception 0xe3 IP 10:ffffffff8fbbb620 error 0 cr2 0x0
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #1
[ 0.000000] RIP: 0010:strlen+0x0/0x20
...
[ 0.000000] Call Trace
[ 0.000000] ? kgdboc_option_setup+0x9/0xa0
[ 0.000000] ? kgdboc_early_init+0x6/0x1b
[ 0.000000] ? do_early_param+0x4d/0x82
[ 0.000000] ? parse_args+0x212/0x330
[ 0.000000] ? rdinit_setup+0x26/0x26
[ 0.000000] ? parse_early_options+0x20/0x23
[ 0.000000] ? rdinit_setup+0x26/0x26
[ 0.000000] ? parse_early_param+0x2d/0x39
[ 0.000000] ? setup_arch+0x2f7/0xbf4
[ 0.000000] ? start_kernel+0x5e/0x4c2
[ 0.000000] ? load_ucode_bsp+0x113/0x12f
[ 0.000000] ? secondary_startup_64+0xa5/0xb0
This patch adds a check to prevent the panic.
Cc: stable@vger.kernel.org
Cc: jason.wessel@windriver.com
Cc: gregkh@linuxfoundation.org
Cc: jslaby@suse.com
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable automatic flow control which should ensure that there is no
mainteinance in connection for zcu100 BT case.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Nava kishore Manne <navam@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Record port ID in device data structure to be have it connected to
certain instance.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Every instance is registering own struct console and struct uart_driver
with minor number which corresponds to alias ID (or 0 now) and with 1 uart
port. The same alias ID is saved to tty_driver->name_base which is key
field for creating ttyPSX name.
Because name_base and minor number are setup already there is no need to
setup any port->line number because 0 is the right value.
Unfortunately this driver is setting up major number to 0 for using
dynamic assignment and kernel is allocating different major numbers for
every instance instead of using the same major and different minor
number.
~# ls -la /dev/ttyPS*
crw------- 1 root root 252, 0 Jan 1 03:36 /dev/ttyPS0
crw--w---- 1 root root 253, 1 Jan 1 00:00 /dev/ttyPS1
When major number is not 0. For example 252 then major/minor
combinations are in expected form
~# ls -la /dev/ttyPS*
crw------- 1 root root 252, 0 Jan 1 04:04 /dev/ttyPS0
crw--w---- 1 root root 252, 1 Jan 1 00:00 /dev/ttyPS1
Driver is not freeing struct cdns_uart_console in case that instance is
not used as console. The reason is that console is incorrectly unregistred
and "console [0] disabled" message will be shown.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change logic how console_port is setup by using CON_ENABLED flag
instead of index. There will be unique cdns_uart_console() structures
that's why code can't use id for console_port assignment.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is preparation step for dynamic port allocation without
CDNS_UART_NR_PORTS macro. Fill the structure only once at probe.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Register uart driver in probe to be able to register one device with
unique major/minor separately. Also calculate number of instances of
this driver to be able to call uart_unregister_driver() when there is no
instance.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This cosmetic change is done only for having next patch much easier to
read. Moving id setup higher in probe is not affecting any usage of this
driver and it also simplify error path.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cdns_uart_suspend()/resume() and remove() are using static reference
to struct uart_driver. Assign this reference to private data structure
as preparation step for dynamic struct uart_driver allocation.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver's suspend/resume functions were buggy.
If UART node contains any child node in the DT and
the child is established a communication path with
the parent UART. The relevant /dev/ttyPS* node will
be not available for other operations.
If the driver is trying to do any operations like
suspend/resume without checking the tty->dev status
it leads to the kernel crash/hang.
This patch fix this issue by call the device_may_wake()
with the generic parameter of type struct device.
in the uart suspend and resume paths.
It also fixes a race condition in the uart suspend
path(i.e uart_suspend_port() should be called at the
end of cdns_uart_suspend API this path updates the same)
Signed-off-by: Nava kishore Manne <navam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Writing zero and NULLs to already initialized fields is not needed.
Remove this additional writes.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When console device is rebinded, console_setup() is called again.
But marking it as __init means that function will be clear after boot is
complete. If console device is binded again console_setup() is not found
and error "Unable to handle kernel paging request at virtual address"
is reported.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull DeviceTree fix from Rob Herring:
"One regression for a 20 year old PowerMac:
- Fix a regression on systems having a DT without any phandles which
happens on a PowerMac G3"
* tag 'devicetree-fixes-for-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: fix phandle cache creation for DTs with no phandles
Pull xen fixes from Juergen Gross:
"This contains some minor cleanups and fixes:
- a new knob for controlling scrubbing of pages returned by the Xen
balloon driver to the Xen hypervisor to address a boot performance
issue seen in large guests booted pre-ballooned
- a fix of a regression in the gntdev driver which made it impossible
to use fully virtualized guests (HVM guests) with a 4.19 based dom0
- a fix in Xen cpu hotplug functionality which could be triggered by
wrong admin commands (setting number of active vcpus to 0)
One further note: the patches have all been under test for several
days in another branch. This branch has been rebased in order to avoid
merge conflicts"
* tag 'for-linus-4.19c-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/gntdev: fix up blockable calls to mn_invl_range_start
xen: fix GCC warning and remove duplicate EVTCHN_ROW/EVTCHN_COL usage
xen: avoid crash in disable_hotplug_cpu
xen/balloon: add runtime control for scrubbing ballooned out pages
xen/manage: don't complain about an empty value in control/sysrq node
Pull dmaengine fix from Vinod Koul:
"Fix the mic_x100_dma driver to use devm_kzalloc for driver memory, so
that it is freed properly when it unregisters from dmaengine using
managed API"
* tag 'dmaengine-fix-4.19-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: mic_x100_dma: use devm_kzalloc to fix an issue
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for -rc4.
The usual suspects of gadget, xhci, and dwc2/3 are in here, along with
some reverts of reported problem changes, and a number of build
documentation warning fixes. Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
Revert "cdc-acm: implement put_char() and flush_chars()"
usb: Change usb_of_get_companion_dev() place to usb/common
usb: xhci: fix interrupt transfer error happened on MTK platforms
usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()
usb: misc: uss720: Fix two sleep-in-atomic-context bugs
usb: host: u132-hcd: Fix a sleep-in-atomic-context bug in u132_get_frame()
usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()
linux/mod_devicetable.h: fix kernel-doc missing notation for typec_device_id
usb/typec: fix kernel-doc notation warning for typec_match_altmode
usb: Don't die twice if PCI xhci host is not responding in resume
usb: mtu3: fix error of xhci port id when enable U3 dual role
usb: uas: add support for more quirk flags
USB: Add quirk to support DJI CineSSD
usb: typec: fix kernel-doc parameter warning
usb/dwc3/gadget: fix kernel-doc parameter warning
USB: yurex: Check for truncation in yurex_read()
USB: yurex: Fix buffer over-read in yurex_write()
usb: host: xhci-plat: Iterate over parent nodes for finding quirks
xhci: Fix use after free for URB cancellation on a reallocated endpoint
USB: add quirk for WORLDE Controller KS49 or Prodipe MIDI 49C USB controller
...
Pull tty fixes from Greg KH:
"Here are three small HVC tty driver fixes to resolve a reported
regression from 4.19-rc1.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: hvc: hvc_write() fix break condition
tty: hvc: hvc_poll() fix read loop batching
tty: hvc: hvc_poll() fix read loop hang
Pull staging/IIO driver fixes from Greg KH:
"Here are a few small staging and iio driver fixes for -rc4.
Nothing major, just a few small bugfixes for some reported issues, and
a MAINTAINERS file update for the fbtft drivers.
We also re-enable the building of the erofs filesystem as the XArray
patches that were causing it to break never got merged in the -rc1
cycle, so there's no reason it can't be turned back on for now. The
problem that was previously there is now being handled in the Xarray
tree at the moment, so it will not hit us again in the future.
All of these patches have been in linux-next with no reported issues"
* tag 'staging-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vboxvideo: Change address of scanout buffer on page-flip
staging: vboxvideo: Fix IRQs no longer working
staging: gasket: TODO: re-implement using UIO
staging/fbtft: Update TODO and mailing lists
staging: erofs: rename superblock flags (MS_xyz -> SB_xyz)
iio: imu: st_lsm6dsx: take into account ts samples in wm configuration
Revert "iio: temperature: maxim_thermocouple: add MAX31856 part"
Revert "staging: erofs: disable compiling temporarile"
MAINTAINERS: Switch a maintainer for drivers/staging/gasket
staging: wilc1000: revert "fix TODO to compile spi and sdio components in single module"
Pull char/misc driver fixes from Greg KH:
"Here are a small handful of char/misc driver fixes for 4.19-rc4.
All of them are simple, resolving reported problems in a few drivers.
Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
firmware: Fix security issue with request_firmware_into_buf()
vmbus: don't return values for uninitalized channels
fpga: dfl: fme: fix return value check in in pr_mgmt_init()
misc: hmc6352: fix potential Spectre v1
Tools: hv: Fix a bug in the key delete code
misc: ibmvsm: Fix wrong assignment of return code
android: binder: fix the race mmap and alloc_new_buf_locked
mei: bus: need to unlink client before freeing
mei: bus: fix hw module get/put balance
mei: fix use-after-free in mei_cl_write
mei: ignore not found client in the enumeration
Patch series "mmu_notifiers follow ups".
Tetsuo has noticed some fallouts from 93065ac753 ("mm, oom: distinguish
blockable mode for mmu notifiers"). One of them has been fixed and picked
up by AMD/DRM maintainer [1]. XEN issue is fixed by patch 1. I have also
clarified expectations about blockable semantic of invalidate_range_end.
Finally the last patch removes MMU_INVALIDATE_DOES_NOT_BLOCK which is no
longer used nor needed.
[1] http://lkml.kernel.org/r/20180824135257.GU29735@dhcp22.suse.cz
This patch (of 3):
93065ac753 ("mm, oom: distinguish blockable mode for mmu notifiers") has
introduced blockable parameter to all mmu_notifiers and the notifier has
to back off when called in !blockable case and it could block down the
road.
The above commit implemented that for mn_invl_range_start but both
in_range checks are done unconditionally regardless of the blockable mode
and as such they would fail all the time for regular calls. Fix this by
checking blockable parameter as well.
Once we are there we can remove the stale TODO. The lock has to be
sleepable because we wait for completion down in gnttab_unmap_refs_sync.
Link: http://lkml.kernel.org/r/20180827112623.8992-2-mhocko@kernel.org
Fixes: 93065ac753 ("mm, oom: distinguish blockable mode for mmu notifiers")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
This patch removes duplicate macro useage in events_base.c.
It also fixes gcc warning:
variable ‘col’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Joshua Abraham <j.abraham1776@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The command 'xl vcpu-set 0 0', issued in dom0, will crash dom0:
BUG: unable to handle kernel NULL pointer dereference at 00000000000002d8
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 PID: 65 Comm: xenwatch Not tainted 4.19.0-rc2-1.ga9462db-default #1 openSUSE Tumbleweed (unreleased)
Hardware name: Intel Corporation S5520UR/S5520UR, BIOS S5500.86B.01.00.0050.050620101605 05/06/2010
RIP: e030:device_offline+0x9/0xb0
Code: 77 24 00 e9 ce fe ff ff 48 8b 13 e9 68 ff ff ff 48 8b 13 e9 29 ff ff ff 48 8b 13 e9 ea fe ff ff 90 66 66 66 66 90 41 54 55 53 <f6> 87 d8 02 00 00 01 0f 85 88 00 00 00 48 c7 c2 20 09 60 81 31 f6
RSP: e02b:ffffc90040f27e80 EFLAGS: 00010203
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff8801f3800000 RSI: ffffc90040f27e70 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffffffff820e47b3 R09: 0000000000000000
R10: 0000000000007ff0 R11: 0000000000000000 R12: ffffffff822e6d30
R13: dead000000000200 R14: dead000000000100 R15: ffffffff8158b4e0
FS: 00007ffa595158c0(0000) GS:ffff8801f39c0000(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000002d8 CR3: 00000001d9602000 CR4: 0000000000002660
Call Trace:
handle_vcpu_hotplug_event+0xb5/0xc0
xenwatch_thread+0x80/0x140
? wait_woken+0x80/0x80
kthread+0x112/0x130
? kthread_create_worker_on_cpu+0x40/0x40
ret_from_fork+0x3a/0x50
This happens because handle_vcpu_hotplug_event is called twice. In the
first iteration cpu_present is still true, in the second iteration
cpu_present is false which causes get_cpu_device to return NULL.
In case of cpu#0, cpu_online is apparently always true.
Fix this crash by checking if the cpu can be hotplugged, which is false
for a cpu that was just removed.
Also check if the cpu was actually offlined by device_remove, otherwise
leave the cpu_present state as it is.
Rearrange to code to do all work with device_hotplug_lock held.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Scrubbing pages on initial balloon down can take some time, especially
in nested virtualization case (nested EPT is slow). When HVM/PVH guest is
started with memory= significantly lower than maxmem=, all the extra
pages will be scrubbed before returning to Xen. But since most of them
weren't used at all at that point, Xen needs to populate them first
(from populate-on-demand pool). In nested virt case (Xen inside KVM)
this slows down the guest boot by 15-30s with just 1.5GB needed to be
returned to Xen.
Add runtime parameter to enable/disable it, to allow initially disabling
scrubbing, then enable it back during boot (for example in initramfs).
Such usage relies on assumption that a) most pages ballooned out during
initial boot weren't used at all, and b) even if they were, very few
secrets are in the guest at that time (before any serious userspace
kicks in).
Convert CONFIG_XEN_SCRUB_PAGES to CONFIG_XEN_SCRUB_PAGES_DEFAULT (also
enabled by default), controlling default value for the new runtime
switch.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
When guest receives a sysrq request from the host it acknowledges it by
writing '\0' to control/sysrq xenstore node. This, however, make xenstore
watch fire again but xenbus_scanf() fails to parse empty value with "%c"
format string:
sysrq: SysRq : Emergency Sync
Emergency Sync complete
xen:manage: Error -34 reading sysrq code in control/sysrq
Ignore -ERANGE the same way we already ignore -ENOENT, empty value in
control/sysrq is totally legal.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Pull block fixes from Jens Axboe:
"Three fixes that should go into this series. This contains:
- Increase number of policies supported by blk-cgroup.
With blk-iolatency, we now have four in kernel, but we had a hard
limit of three...
- Fix regression in null_blk, where the zoned supported broke
queue_mode=0 (bio based).
- NVMe pull request, with a single fix for an issue in the rdma code"
* tag 'for-linus-20180913' of git://git.kernel.dk/linux-block:
null_blk: fix zoned support for non-rq based operation
blk-cgroup: increase number of supported policies
nvmet-rdma: fix possible bogus dereference under heavy load
Pull device mapper fixes from Mike Snitzer:
- DM verity fix for crash due to using vmalloc'd buffers with the
asynchronous crypto hadsh API.
- Fix to both DM crypt and DM integrity targets to discontinue using
CRYPTO_TFM_REQ_MAY_SLEEP because its use of GFP_KERNEL can lead to
deadlock by recursing back into a filesystem.
- Various DM raid fixes related to reshape and rebuild races.
- Fix for DM thin-provisioning to avoid data corruption that was a
side-effect of needing to abort DM thin metadata transaction due to
running out of metadata space. Fix is to reserve a small amount of
metadata space so that once it is used the DM thin-pool can finish
its active transaction before switching to read-only mode.
* tag 'for-4.19/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm thin metadata: try to avoid ever aborting transactions
dm raid: bump target version, update comments and documentation
dm raid: fix RAID leg rebuild errors
dm raid: fix rebuild of specific devices by updating superblock
dm raid: fix stripe adding reshape deadlock
dm raid: fix reshape race on small devices
dm: disable CRYPTO_TFM_REQ_MAY_SLEEP to fix a GFP_KERNEL recursion deadlock
dm verity: fix crash on bufio buffer that was allocated with vmalloc
Pull drm fixes from Dave Airlie:
"This is the general drm fixes pull for rc4.
i915:
- Two GVT fixes (one for the mm reference issue you pointed out)
- Gen 2 video playback fix
- IPS timeout error suppression on Broadwell
amdgpu:
- Small memory leak
- SR-IOV reset
- locking fix
- updated SDMA golden registers
nouveau:
- Remove some leftover debugging"
* tag 'drm-fixes-2018-09-14' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/devinit: fix warning when PMU/PRE_OS is missing
drm/amdgpu: fix error handling in amdgpu_cs_user_fence_chunk
drm/i915/overlay: Allocate physical registers from stolen
drm/amdgpu: move PSP init prior to IH in gpu reset
drm/amdgpu: Fix SDMA hang in prt mode v2
drm/amdgpu: fix amdgpu_mn_unlock() in the CS error path
drm/i915/bdw: Increase IPS disable timeout to 100ms
drm/i915/gvt: Fix the incorrect length of child_device_config issue
drm/i915/gvt: Fix life cycle reference on KVM mm
Pull pin control fixes from Linus Walleij:
- A complicated IRQ fix for the MSM driver (see commit)
- Fix the group/function check in the Ingenic driver
- Deal with a possible NULL pointer dereference in the Madera driver
* tag 'pinctrl-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: madera: Fix possible NULL pointer with pdata config
pinctrl: ingenic: Fix group & function error checking
pinctrl: msm: Really mask level interrupts to prevent latching
Pull s390 fixes from Martin Schwidefsky:
- One fix for the zcrypt driver to correctly handle incomplete
encryption/decryption operations.
- A cleanup for the aqmask/apmask parsing to avoid variable length
arrays on the stack.
* tag 's390-4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: remove VLA usage from the AP bus
s390/crypto: Fix return code checking in cbc_paes_crypt()
