Pull x86 fix from Borislav Petkov
- Fix for older binutils which do not support C-syntax constant
suffixes
* tag 'x86_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Do not use integer constant suffixes in inline asm
Pull input fixes from Dmitry Torokhov:
- a check in pegasus-notetaker driver to validate the type of pipe when
probing a new device
- a fix for Cypress touch controller to correctly parse maximum number
of touches.
* tag 'input-for-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cyttsp5 - fix sensing configuration data structure
Input: pegasus-notetaker - check pipe type when probing
This new target builds only the debian source package.
Unify the build rules of deb-pkg, srcdeb-pkg, bindeb-pkg to avoid
code duplication.
--no-check-builddeps is added to srcdeb-pkg so that build dependencies
will not be checked.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The kernel will print several warnings in a short period of time
when it stalls. Like this:
First warning:
[ 7100.097547] ------------[ cut here ]------------
[ 7100.097550] NETDEV WATCHDOG: eno2 (xxx): transmit queue 8 timed out
[ 7100.097571] WARNING: CPU: 8 PID: 0 at net/sched/sch_generic.c:467
dev_watchdog+0x260/0x270
...
Second warning:
[ 7147.756952] rcu: INFO: rcu_preempt self-detected stall on CPU
[ 7147.756958] rcu: 24-....: (59999 ticks this GP) idle=546/1/0x400000000000000
softirq=367 3137/3673146 fqs=13844
[ 7147.756960] (t=60001 jiffies g=4322709 q=133381)
[ 7147.756962] NMI backtrace for cpu 24
...
We calculate that the transmit queue start stall should occur before
7095s according to watchdog_timeo, the rcu start stall at 7087s.
These two times are close together, it is difficult to confirm which
happened first.
To let users know the exact time the stall started, print msecs when
the transmit queue time out.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
Remove skb_mac_header() dependency in DSA xmit path
Eric started working on removing skb_mac_header() assumptions from the
networking xmit path, and I offered to help for DSA:
https://lore.kernel.org/netdev/20230321164519.1286357-1-edumazet@google.com/
The majority of this patch set is a straightforward replacement of
skb_mac_header() with skb->data (hidden either behind skb_eth_hdr(), or
behind skb_vlan_eth_hdr()). The only patch which is more "interesting"
is 9/9.
Another potential caller of __skb_vlan_pop() on xmit (and therefore
also of skb_mac_header()) is tcf_vlan_act(), but I haven't had the time
to investigate that (enough to submit changes other than what's here).
v1->v2:
- 09/09: document the vlan_tci argument of vlan_remove_tag() in the kdoc
v1 at:
https://lore.kernel.org/netdev/20230322233823.1806736-1-vladimir.oltean@nxp.com/
Cc: Madalin Bucur <madalin.bucur@nxp.com>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ocelot_xmit_get_vlan_info() calls __skb_vlan_pop() as the most
appropriate helper I could find which strips away a VLAN header.
That's all I need it to do, but __skb_vlan_pop() has more logic, which
will become incompatible with the future revert of commit 6d1ccff627
("net: reset mac header in dev_start_xmit()").
Namely, it performs a sanity check on skb_mac_header(), which will stop
being set after the above revert, so it will return an error instead of
removing the VLAN tag.
ocelot_xmit_get_vlan_info() gets called in 2 circumstances:
(1) the port is under a VLAN-aware bridge and the bridge sends
VLAN-tagged packets
(2) the port is under a VLAN-aware bridge and somebody else (an 8021q
upper) sends VLAN-tagged packets (using a VID that isn't in the
bridge vlan tables)
In case (1), there is actually no bug to defend against, because
br_dev_xmit() calls skb_reset_mac_header() and things continue to work.
However, in case (2), illustrated using the commands below, it can be
seen that our intervention is needed, since __skb_vlan_pop() complains:
$ ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up
$ ip link set $eth master br0 && ip link set $eth up
$ ip link add link $eth name $eth.100 type vlan id 100 && ip link set $eth.100 up
$ ip addr add 192.168.100.1/24 dev $eth.100
I could fend off the checks in __skb_vlan_pop() with some
skb_mac_header_was_set() calls, but seeing how few callers of
__skb_vlan_pop() there are from TX paths, that seems rather
unproductive.
As an alternative solution, extract the bare minimum logic to strip a
VLAN header, and move it to a new helper named vlan_remove_tag(), close
to the definition of vlan_insert_tag(). Document it appropriately and
make ocelot_xmit_get_vlan_info() call this smaller helper instead.
Seeing that it doesn't appear illegal to test skb->protocol in the TX
path, I guess it would be a good for vlan_remove_tag() to also absorb
the vlan_set_encap_proto() function call.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once commit 6d1ccff627 ("net: reset mac header in dev_start_xmit()")
will be reverted, it will no longer be true that skb->data points at
skb_mac_header(skb) - since the skb->mac_header will not be set - so
stop saying that, and just say that it points to the MAC header.
I've reviewed vlan_insert_tag() and it does not *actually* depend on
skb_mac_header(), so reword that to avoid the confusion.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_mac_header() will no longer be available in the TX path when
reverting commit 6d1ccff627 ("net: reset mac header in
dev_start_xmit()"). As preparation for that, let's use
skb_vlan_eth_hdr() to get to the VLAN header instead, which assumes it's
located at skb->data (assumption which holds true here).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_mac_header() will no longer be available in the TX path when
reverting commit 6d1ccff627 ("net: reset mac header in
dev_start_xmit()"). As preparation for that, let's use skb_eth_hdr() to
get to the Ethernet header's MAC DA instead, helper which assumes this
header is located at skb->data (assumption which holds true here).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_mac_header() will no longer be available in the TX path when
reverting commit 6d1ccff627 ("net: reset mac header in
dev_start_xmit()"). As preparation for that, let's use
skb_vlan_eth_hdr() to get to the VLAN header instead, which assumes it's
located at skb->data (assumption which holds true here).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It appears that dpaa_enable_tx_csum() only calls skb_reset_mac_header()
to get to the VLAN header using skb_mac_header().
We can use skb_vlan_eth_hdr() to get to the VLAN header based on
skb->data directly. This avoids spending a few cycles to set
skb->mac_header.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to skb_eth_hdr() introduced in commit 96cc4b6958 ("macvlan: do
not assume mac_header is set in macvlan_broadcast()"), let's introduce a
skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get
to the VLAN header based on skb->data rather than based on the
skb_mac_header(skb).
We also consolidate the drivers that dereference skb->data to go through
this helper.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a preparatory change for the deletion of skb_reset_mac_header(skb)
from __dev_queue_xmit(). After that deletion, skb_mac_header(skb) will
no longer be set in TX paths, from which __vlan_insert_inner_tag() can
still be called (perhaps indirectly).
If we don't make this change, then an unset MAC header (equal to ~0U)
will become set after the adjustment with VLAN_HLEN.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for the Microchip LAN867x 10BASE-T1S family
(LAN8670/1/2). The driver supports P2MP with PLCA.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ramón Nordin Rodriguez <ramon.nordin.rodriguez@ferroamp.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Smatch complains that:
mtk_wed_hw_add_debugfs() warn: 'dir' is an error pointer or valid
Debugfs checks are generally not supposed to be checked
for errors and it is not necessary here.
fix it by just deleting the dead code.
Signed-off-by: Wang Zhang <silver_code@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
We use napi_threaded_poll() in order to reduce our softirq dependency.
We can add a followup of 821eba962d ("net: optimize napi_schedule_rps()")
to further remove the need of firing NET_RX_SOFTIRQ whenever
RPS/RFS are used.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we call skb_defer_free_flush() from napi_threaded_poll(),
we can avoid to raise IPI from skb_attempt_defer_free()
when the list becomes too big.
This allows napi_threaded_poll() to rely less on softirqs,
and lowers latency caused by a too big list.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We plan using skb_defer_free_flush() from napi_threaded_poll()
in the following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kfree_skb() can be called from hard irq handlers,
but skb_attempt_defer_free() is meant to be used
from process or BH contexts, and skb_defer_free_flush()
is meant to be called from BH contexts.
Not having to mask hard irq can save some cycles.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
This series lowers the CPU usage of the ice driver when using its
provided /dev/gnss*.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Older chips (like MT7622) use a different bit in ib2 to enable hardware
counter support. Add macros for both and select the appropriate bit.
Fixes: 3fbe4d8c0e ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit f8d94c4e40 ("kbuild: do not create intermediate *.tar
for source tarballs"), 'make rpm-pkg' fails because the prefix of the
source tarball is 'linux.tar/' instead of 'linux/'. $(basename $@)
strips only '.gz' from the filename linux.tar.gz.
You need to strip two suffixes from compressed tarballs and one suffix
from uncompressed tarballs (for example 'perf-6.3.0.tar' generated by
'make perf-tar-src-pkg').
One tricky fix might be --prefix=$(firstword $(subst .tar, ,$@))/
but I think it is better to hard-code the prefix.
Fixes: f8d94c4e40 ("kbuild: do not create intermediate *.tar for source tarballs")
Reported-by: Jiwei Sun <sunjw10@lenovo.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
- Use correct address limit for Audigy
- Use the right constant to actually make a step on Audigy
- Don't store *_DBG_STEP and the address in emu->fx8010.dbg, as
otherwise unrelated operations would make steps, too
This is untested. as10k1 was never ported to Audigy anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1144004-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The rev2 cards use CA0108, but the embedded P17V goes entirely unused.
Also, A_IOCTL (which is really the GPIO port) is actually the FPGA
control port, so messing with it is no good idea.
The hacks are actually mutually exclusive, so make that explicit while
we're at it.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143888-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Firstly, fix the distribution between public and private headers.
Otherwise, some of the already public macros wouldn't actually work, and
the SNDRV_EMU10K1_IOCTL_DBG_READ result for Audigy would be useless.
Secondly, add condition code registers for Audigy. These are just
aliases for selected constant registers, and thus are generation-
specific. At least A_CC_REG_ZERO is actually correct ...
Finally, shuffle around some defines to more logical places while at it,
and fix up some more comments.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Firstly, remove the FXWC_* defines - the comment on FXWC implies that
the relevant defines are the (A_)EXTOUT_* ones. It's unclear where this
came from - it was in the initial ALSA import, but neither the driver
from Creative nor kX-project have these defines.
Secondly, remove A_HR, which made plain no sense (was unused, and
clashed with FXRT). Amends commit cbb7d8f9b7 ("emu10k1: Update
registers defines for the Audigy 2/emu10k2.5").
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull MIPS fix from Thomas Bogendoerfer:
"Fix for link errors"
* tag 'mips-fixes_6.3_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Define RUNTIME_DISCARD_EXIT in LD script
The CXL subsystem is adding formal mechanisms for managing device
poison. Minimize the maintenance burden going forward, and maximize
the investment in common tooling by deprecating direct user access
to poison commands outside of CXL_MEM_RAW_COMMANDS debug scenarios.
A new cxl_deprecated_commands[] list is created for querying which
command ids defined in previous kernels are now deprecated.
CXL Media and Poison Management commands, opcodes 0x43XX, defined in
CXL 3.0 Spec, Table 8-93 are deprecated with one exception: Get Scan
Media Capabilities. Keep Get Scan Media Capabilities as it simply
provides information and has no impact on the device state.
Effectively all of the commands defined in:
commit 87815ee9d0 ("cxl/pci: Add media provisioning required commands")
...were defined prematurely and should have waited until the kernel
implementation was decided. To my knowledge there are no shipping
devices with poison support and no known tools that would regress with
this change.
Co-developed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/652197e9bc8885e6448d989405b9e50ee9d6b0a6.1681838291.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If check_bugs_early() is not inlined, which a compiler is free to do
after commit ac7c3e4ff4 ("compiler: enable CONFIG_OPTIMIZE_INLINING
forcibly"), modpost would warn that check_bugs_early(), a non-init
function, refers to check_bugs64_early(), which is marked __init. This
would not result in any run time issues, as check_bugs_early() is only
called from setup_arch(), which is marked __init.
To avoid this potential warning, just sink the body of
check_bugs_early() into its single call site in setup_arch().
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit ac7c3e4ff4 ("compiler: enable CONFIG_OPTIMIZE_INLINING
forcibly"), a compiler may choose not to inline a function marked with
just 'inline'. If check_bugs() is not inlined into start_kernel(), which
occurs when building with clang after commit 9ea7e6b62c ("init: Mark
[arch_call_]rest_init() __noreturn"), modpost complains with:
WARNING: modpost: vmlinux.o: section mismatch in reference: check_bugs (section: .text) -> check_bugs32 (section: .init.text)
check_bugs() is only called from start_kernel(), which itself is marked
__init, so there would not be any issues at run time. Make it obvious to
modpost that this call chain is safe by marking check_bugs() as __init,
which fixes the warning.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/CA+G9fYt+4e57Gdy6cix=LeNK6XqWoui8du=mZWu=cf8vPYocKw@mail.gmail.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Not all endpoint CXL ports are associated with PCI devices. The cxl_test
infrastructure models 'struct cxl_port' instances hosted by platform
devices. Teach read_cdat_data() to be careful about non-pci hosted
cxl_memdev instances. Otherwise, cxl_test crashes with this signature:
RIP: 0010:xas_start+0x6d/0x290
[..]
Call Trace:
<TASK>
xas_load+0xa/0x50
xas_find+0x25b/0x2f0
xa_find+0x118/0x1d0
pci_find_doe_mailbox+0x51/0xc0
read_cdat_data+0x45/0x190 [cxl_core]
cxl_port_probe+0x10a/0x1e0 [cxl_port]
cxl_bus_probe+0x17/0x50 [cxl_core]
Some other cleanups are included like removing the single-use @uport
variable, and removing the indirection through 'struct cxl_dev_state' to
lookup the device that registered the memdev and may be a pci device.
Fixes: af0a6c3587 ("cxl/pci: Use CDAT DOE mailbox created by PCI core")
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/168213190748.708404.16215095414060364800.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull kvm fixes from Paolo Bonzini:
"Two serious ARM fixes:
- Plug a buffer overflow due to the use of the user-provided register
width for firmware regs. Outright reject accesses where the user
register width does not match the kernel representation.
- Protect non-atomic RMW operations on vCPU flags against preemption,
as an update to the flags by an intervening preemption could be
lost"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Fix buffer overflow in kvm_arm_set_fw_reg()
KVM: arm64: Make vcpu flag updates non-preemptible
Pull cifs fixes from Steve French:
"Three small smb3 client fixes:
- two important fixes for unbuffered read regression with the
iov_iter changes (e.g. read soon after mount in some multichannel
scenarios)
- DFS prefix path fix (also for stable)"
* tag '6.3-rc7-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Reapply lost fix from commit 30b2b2196d
cifs: Fix unbuffered read
cifs: avoid dup prefix path in dfs_get_automount_devname()
Unlike the Alice2 chips used on 1st generation E-MU cards, the
Tina/Tina2 chips used on the 2nd gen cards have only six GPIN pins,
which means that we need to use a smaller mask. Failure to do so would
falsify the read data if the FPGA tried to raise an IRQ right at that
moment. This wasn't a problem so far, as we didn't actually enable FPGA
IRQs, but that's going to change soon.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422132430.1057490-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
