/tmp/rtl8703b_phycfg-53954c.s: Assembler messages:
/tmp/rtl8703b_phycfg-53954c.s:3071: Error: selected processor does not support `bfc w0,#4,#4'
Change-Id: I9a2cf7ea8b4da82ab6148043983ad57b68b93562
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
drivers/net/wireless/rockchip_wlan/rtl8723cs/core/rtw_debug.c:45:44: error: expansion of date or time macro is not reproducible [-Werror,-Wdate-time]
RTW_PRINT_SEL(sel, "build time: %s %s\n", __DATE__, __TIME__);
Change-Id: I07e50007edc508ec684eb421cfe5fd4378c96553
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
This is a HACK patch setting dwc3 dr-mode from otg to peripheral.
Change-Id: I4a6ba065e0369315e95f6ad251b58cc16b1c4e81
Signed-off-by: Jianing Ren <jianing.ren@rock-chips.com>
1 add mclk control
2 add speaker amplifier control
Change-Id: Ib3c03cd281f1ebf4d6d583076bd3930bbe3b3fe0
Signed-off-by: Shunhua Lan <lsh@rock-chips.com>
The driver does not match the dts, pmic driver is update to 4.19 kernel,
but the dts node is not update,make the vcc_ddr regulator init failed:
[ 2.126351] rk808 0-001a: chip id: 0x8160
[ 2.134083] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 2.134229] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 2.134347] DCDC_REG1: supplied by vcc_sys
[ 2.136769] DCDC_REG2: supplied by vcc_sys
[ 2.138759] DCDC_REG3: supplied by vcc_sys
[ 2.139064] vcc_ddr: no set_mode operation
[ 2.139110] rk808 0-001a: failed to register 2 regulator
[ 2.140110] rk808-regulator: probe of rk808-regulator failed with error -22
Change-Id: Ieecd8678345202db0be5ac4c669c890283793d42
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
OV13850 Camera Module used by rk3399 & rk3399pro excavator board
Change-Id: Ieb06cc519609392475db1d4f0103a89d22110fd4
Signed-off-by: Wang Panzhenzhuan <randy.wang@rock-chips.com>
When PCIe link broken, remove pcie dev and reprobe may repair the link,
also need to remove the dma_trx_obj
Change-Id: If0a243d7c39bef5763c22fa53d5e7a6d515412f5
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Delete SRST_PCIEPHY_POR, SRST_PCIEPHY_P, SRST_PCIEPHY_PIPE from PCIe
node, combo phy node already include these softreset
Change-Id: I7f1c739fbbb9b8c43ecb620b5d0655d0e1d221cb
Signed-off-by: Simon Xue <xxm@rock-chips.com>
rng node is compflict with crypto node, so default disable
rng node and crypto node.
Change-Id: I9a28108a5667f88c15d5cc9916d927115cdb8918
Signed-off-by: Lin Jinhan <troy.lin@rock-chips.com>
As the device name has been changed to devfreq(X), but user should find
devfreq driver with their parent device name, so add a new link named
with parent name.
Change-Id: I5077ddecbcc8db8d59cb6f16f2be5107b391677d
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
There are several SoCs (e.g. rk3228h and rk3328) that integrated
with Inno USB3 PHY, they can't toggle CP test pattern when do
USB3 compliance test by default.
This patch add a cp_test callback for USB3 controller to enable
the special USB3 PHY to toggle the CP test pattern.
Change-Id: I2d603202723a4c044d4231af10cfe2c60ec0e988
Signed-off-by: William Wu <wulf@rock-chips.com>
1. Add support for DW PCIe controller found on RK1808 SoC platform
2. Add support PCIe udma transfer
Change-Id: Ic6d638782d1f55f965d663f73eee14bafa392740
Signed-off-by: Simon Xue <xxm@rock-chips.com>
On some platform, external MSI domain is using instead of the one
created by designware driver. For instance, if using GIC-V3-ITS
as a MSI domain, we only need set msi-map in the devicetree but
never need any bit in the designware driver to handle MSI stuff.
So skip allocating its own MSI domain for that case.
Change-Id: Ic4f5f0a1a1833c778c4e4750cb88f34a5b37a198
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Innosilicon combophy for PCIe still need different
configuration between EP and RC mode.
Change-Id: Ie1f14e63785f44d84a2b3a154990c6a54eb1156e
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
drivers/power/supply/rk818_charger.c: In function 'rk818_cg_usb_get_property':
drivers/power/supply/rk818_charger.c:448:11: warning: 'fake_offline' may be used uninitialized in this function [-Wmaybe-uninitialized]
else if (fake_offline)
^
Change-Id: I07ccf6e136d47c75db56004de1c78436e570a356
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
drivers/power/supply/rk818_battery.c: In function 'rk818_bat_calc_zero_linek':
drivers/power/supply/rk818_battery.c:1582:6: warning: 'cnt' may be used uninitialized in this function [-Wmaybe-uninitialized]
cnt++;
~~~^~
drivers/power/supply/rk818_battery.c: In function 'rk818_battery_resume':
drivers/power/supply/rk818_battery.c:3465:20: warning: 'time_step' may be used uninitialized in this function [-Wmaybe-uninitialized]
int interval_sec, time_step, pwroff_vol;
^~~~~~~~~
Change-Id: I405e7c1b3a3b567693244b40acdf8ed924331cf7
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
drivers/power/supply/rk817_battery.c: In function 'rk817_bat_pm_resume':
drivers/power/supply/rk817_battery.c:3290:34: warning: 'time_step' may be used uninitialized in this function [-Wmaybe-uninitialized]
(battery->sleep_dischrg_sec > time_step)) {
~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~
Change-Id: I5ca86f00471e467448145bcb001d17b0ed242c49
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/bcmsdh_sdmmc.c: In function 'sdioh_request_packet_chain':
drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/bcmsdh_sdmmc.c:1291:77: warning: '*((void *)&before+8)' may be used uninitialized in this function [-Wmaybe-uninitialized]
write, ttl_len, now.tv_sec-before.tv_sec, now.tv_nsec/1000-before.tv_nsec/1000));
^
drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd/bcmsdh_sdmmc.c:1107:23: note: 'before' was declared here
struct timespec now, before;
^~~~~~
Change-Id: I34e1b7132ad2771932e53475788dd4f3607f0233
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
drivers/input/sensors/accel/mc3230.c: In function 'sensor_report_value':
drivers/input/sensors/accel/mc3230.c:602:4: warning: 'result' may be used uninitialized in this function [-Wmaybe-uninitialized]
x = mc3230_convert_to_int(buffer[0]) * g_value;
~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/input/sensors/accel/mc3230.c:521:6: note: 'result' was declared here
int result;
^~~~~~
Change-Id: I817bbd56a2a194388bde705cbfa350f8d33b6efa
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
drivers/thermal/rk3368_thermal.c: In function 'rk3368_thermal_get_temp':
drivers/thermal/rk3368_thermal.c:580:12: warning: 'val_cpu' may be used uninitialized in this function [-Wmaybe-uninitialized]
old_data = tsadc_data;
~~~~~~~~~^~~~~~~~~~~~
drivers/thermal/rk3368_thermal.c:529:6: note: 'val_cpu' was declared here
int val_cpu;
^~~~~~~
Change-Id: I365441507082cbbd0f7be01e5f0a09674af6230d
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Enable the Rockchip HW random driver to prevent Android init
from hang due to low entropy.
Change-Id: I0f2c2c1c27c4c91002a42c8cb77e44809815bd03
Signed-off-by: Bian Jin chen <kenjc.bian@rock-chips.com>
According to
commit 8a31d9d942 ("PM / OPP: Update OPP users to put reference")
Fixes: b0ad177659 ("MALI: rockchip: upgrade Bifrost DDK to r20p0-01rel0, from r12p0-01rel0")
Change-Id: I2df7c7ddab0ae740e75579a0f620c3d918f0eed5
Signed-off-by: Zhen Chen <chenzhen@rock-chips.com>
We use cpufreq_interactive governor with Energ Aware Scheduling.
This reverts commit 1e6b1214f1.
Change-Id: I782bed880c858537a89e8928921cbecaeb31d593
Signed-off-by: Liang Chen <cl@rock-chips.com>
This patch do these operation:
42a2c3610d88 Revert "Revert "arm64: dts: rockchip: update iommu clk name from "hclk" to "iface"""
ca40255ac827 arm64: dts: rockchip: adjust dmc opp-table for rk1808
3c867de9a7f3 arm64: dts: rockchip: rk1808: set PCIe as RC default
5eab28bdf11e arm64: dts: rockchip: rk1808: add usb3phy_grf_p for combo phy
a3bb2719be95 arm64: dts: rockchip: rk1808: set min voltage for dmc when low temperature
e0d40e1af1dd arm64: dts: rockchip: limit vdd_npu to 0.88V for rk1808 SoCs
ccffc153ed72 arm64: dts: rockchip: rk1808: add mipi csi dts config
ca3c7ea638a7 arm64: dts: rockchip: rk1808: Add wide-temperature configure
6d4c56b8202a arm64: dts: rockchip: Add system monitor node
77cd099b752f arm64: dts: rockchip: rk1808: disable peri ms and sram auto CS
f4eb4471e1c2 arm64: dts: rockchip: rk1808: Correct the drive strength for rgmii/rmii
302df1d57c63 arm64: dts: rockchip: modify io driver strength for rk1808
6a8dfe606a0a arm64: dts: rockchip: rk1808: assigned-clock-parents for clk_32k_ioe
c2901bf3f30e soc: rockchip: Change the parameter of power model for cpu and npu
71812e7394a4 arm64: dts: rockchip: add soc_bus support for rk1808
2463e3323cd7 arm64: dts: rockchip: adjust opp-table for rk1808 SoCs
4c3b6ea9751c arm64: dts: rockchip: rk1808: support cpu idle
e2037aa67f8f Revert "arm64: dts: rockchip: rk1808: Correct the drive strength for rgmii/rmii"
bca7a337bb60 Revert "soc: rockchip: Change the parameter of power model for cpu and npu"
63f5e887d360 Revert "arm64: dts: rockchip: Add system monitor node"
d691a5bf4b5f Revert "arm64: dts: rockchip: update iommu clk name from "hclk" to "iface""
Change-Id: Ic5915c50019710b57d28e6d1833a6132af57c870
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
I replace "sg_dma_len" with "MALI_SG_DMA_LEN"
and rename configs which have duplicated names in midgard/, as before.
Note that drivers/gpu/arm/bifrost on DDK r20
depends on drivers/base/memory_group_manager.
Change-Id: Ie51fda035a98b5151f25a0fcf7294b88d4ecc978
Signed-off-by: Zhen Chen <chenzhen@rock-chips.com>
drivers/gpu/arm/bifrost on DDK r20 depends on this module.
Change-Id: I175fbd2429aa1b8a658c431ce71503c67976db3d
Signed-off-by: Zhen Chen <chenzhen@rock-chips.com>
