This patch adds USB 2.0 PHY otg-port configuration for rk322x
SoC, this otg-port can be used for USB 2.0 OTG interface.
Change-Id: I7f2e362292edb45078a16d1a9665e3bdccc54814
Signed-off-by: William Wu <william.wu@rock-chips.com>
This patch adds dwc2 controller and its phy nodes for rk322x SoC.
Change-Id: I29779baf92c28154ad342e234e8a5582984b8a12
Signed-off-by: William Wu <william.wu@rock-chips.com>
Fix lockdep warning:
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU:rk3288:/ $ 0 PID: 234 Comm: tee-supplicant Not tainted 4.4.64 #51
Hardware name: Rockchip (Device Tree)
[<c0110018>] (unwind_backtrace) from [<c010c048>] (show_stack+0x10/0x14)
[<c010c048>] (show_stack) from [<c04194a8>] (dump_stack+0x9c/0xd4)
[<c04194a8>] (dump_stack) from [<c018321c>] (__lock_acquire+0x638/0x1c10)
[<c018321c>] (__lock_acquire) from [<c01850ec>] (lock_acquire+0x1d0/0x29c)
[<c01850ec>] (lock_acquire) from [<c0bc0f3c>] (_raw_spin_lock_irqsave+0x50/0x64)
[<c0bc0f3c>] (_raw_spin_lock_irqsave) from [<c017e148>] (down_interruptible+0xc/0x48)
[<c017e148>] (down_interruptible) from [<c03cd72c>] (tee_supp_read+0x74/0x154)
[<c03cd72c>] (tee_supp_read) from [<c025d638>] (__vfs_read+0x2c/0xf0)
[<c025d638>] (__vfs_read) from [<c025de30>] (vfs_read+0x84/0x134)
[<c025de30>] (vfs_read) from [<c025e720>] (SyS_read+0x4c/0xa4)
[<c025e720>] (SyS_read) from [<c01072c0>] (ret_fast_syscall+0x0/0x1c)
Change-Id: I09335112bed6efb30e60a22b471d4467eecaf520
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
* linux-linaro-lsk-v4.4-android: (521 commits)
Linux 4.4.66
ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram
ARCv2: save r30 on kernel entry as gcc uses it for code-gen
nfsd: check for oversized NFSv2/v3 arguments
Input: i8042 - add Clevo P650RS to the i8042 reset list
p9_client_readdir() fix
MIPS: Avoid BUG warning in arch_check_elf
MIPS: KGDB: Use kernel context for sleeping threads
ALSA: seq: Don't break snd_use_lock_sync() loop by timeout
ALSA: firewire-lib: fix inappropriate assignment between signed/unsigned type
ipv6: check raw payload size correctly in ioctl
ipv6: check skb->protocol before lookup for nexthop
macvlan: Fix device ref leak when purging bc_queue
ip6mr: fix notification device destruction
netpoll: Check for skb->queue_mapping
net: ipv6: RTF_PCPU should not be settable from userspace
dp83640: don't recieve time stamps twice
tcp: clear saved_syn in tcp_disconnect()
sctp: listen on the sock only when it's state is listening or closed
net: ipv4: fix multipath RTM_GETROUTE behavior when iif is given
...
Conflicts:
drivers/usb/dwc3/gadget.c
include/linux/usb/quirks.h
Change-Id: I490f766b9a530b10da3107e20709538e4536a99d
This patch adds usb2.0 host and usb-phy related nodes for rk322x SoC.
Change-Id: Ib1c5375f81c8d7b55608b1b1793c27be012a8c6e
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
This adds support host-port on rk322x SoC and amend phy Documentation.
Change-Id: I440adc10e25c98cbe220275fecd12774c08d24d1
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
The VDPU at RK3328 is a standalone decoder IP without
encoder. Also there is the other AVS+ decoder IP,
working as the combo IP.
I introduce the following commit from develop-3.10,
commit ee2f9f6912fb ("rk322xh/vcodec: bugfix, avoid combo device overwrite irq status")
commit 568dabeb12ef ("rockchip/vcodec: bugfix, inconsistence power on/off operation")
The following patches have not been introduced,
it would effect RKV device:
commit b8a2ce7e5b60 ("rockchip/vcodec: disable power-save optimization for hw defeat")
commit 046faf9ba20a ("rk322xh/vcodec: bugfix, probe failed when ion cma heap undefined")
commit beaeb230cbf2 ("rk322xh/vcodec: revise for rk322xh feature")
Change-Id: Ifc14daa84b692f8fcfbd4f6690ed66dd56bbbe29
Signed-off-by: Randy Li <randy.li@rock-chips.com>
This table would be used for both AVS and AVS+ decoder.
Change-Id: I9557a3d170943a3b544d97b6c63f02679bd7b532
Signed-off-by: Randy Li <randy.li@rock-chips.com>
The most of device can get this its running type from the
compatible. This property becomes unnecessary.
Change-Id: I40ec41b130fac2cadd47d92332d27c58a8c2c9f7
Signed-off-by: Randy Li <randy.li@rock-chips.com>
As dmc may also assess register PMU_BUS_IDLE_REQ, we should prevent
pd driver and dmc driver assessing this register at the same time.
Change-Id: I546033536c87dcf497774cbc6c8f36a3e651ff07
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
This function registers a notifier to dmc devfreq, it will lock the mutex
of pmu when scaling frequency, so that pd driver and dmc driver will not
assess register PMU_BUS_IDLE_REQ at the same time.
Change-Id: I0ba96599d9050d11924d032146e6b4d415629614
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
In order to scaling frequency more timely, reduce the polling_ms.
Change-Id: Icbee5552396fa0552fb514d92ea77687228c3e28
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
This adds the necessary data for handling dmcfreq on the rk3368.
Change-Id: Ie202cbaa3b27e52b22a5efc57c6e108fbd03a20a
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
It will be easy to compatible with more rockchip platforms,
if move the initialized code of dram into a separated function.
Change-Id: Iad8738b2c0995712723a8e3e84f12ae6b9b2aa91
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
In some cases, we need to read data from RGA
and DMA_TO_DEVICE are not a proper flag
So change to DMA_BIDIRECTIONAL
Change-Id: I9d421e8a15f948fcb6643addab558803247ea161
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>
support more cpu freq
add armcore div setting
Change-Id: I46ab974da763bab2e887377848be1d9049a1568f
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Add a ddrc clock into clk branches, so we can do ddr frequency
scaling on rk3288 platform in future.
Change-Id: Ia6c93e5ce82fa30475eddf051bc9ea2512b0cc07
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Compiling the DT file with W=1, DTC warns like follows:
Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property
Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.
Change-Id: I5748be7888db149633c3980c3f5e9715cd256a52
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Compiling the DT file with W=1, DTC warns like follows:
Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property
Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.
Change-Id: Id239f49618a818ad87bb77e99f52b52a5ee2dbc6
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
