Use sub-function of_compatible during probe, instead of using the node
name. The code should not rely on the node names during probe, in
addition to that the previously hard-coded node names are not compliant
to the latest naming convention (they are not generic and they use
underscores), and it was broken by mistake already once [1].
[1] commit 56086b5e80 ("ARM: dts: imx6qdl-apalis: Avoid underscore in node name")
Suggested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220712163345.445811-3-francesco.dolcini@toradex.com
Replace custom implementation of the device_match_fwnode(). This hides
the implementation details and makes future changes easier.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The testcase “vmlinux-kallsyms.c” fails in powerpc.
vmlinux symtab matches kallsyms: FAILED!
This test look at the symbols in the vmlinux DSO and check if we find
all of them in the kallsyms dso.
But from the powerpc logs , observed that the failure happens for:
ERR : 0xc0000000000fe9c8: .Lmfspr_table not on kallsyms
ERR : 0xc0000000001009c8: .Lmtspr_table not on kallsyms
These are labels ( with .L) in the source code and has to be ignored.
Reference code with .Lmtspr_table: arch/powerpc/xmon/spr_access.S
The testcases invokes is_ignored_symbol() function to ignore hidden
symbols in the dso like local symbols. This function is adapted from
is_ignored_symbol() kernel function in code: scripts/kallsyms.c . The
kernel function got some updates which is not reflected in the testcase
function and the new updates also handles ignoring "labels".
Below is the changes that went in the kernel function.
/* Symbol names that begin with the following are ignored.*/
static const char * const ignored_prefixes[] = {
"$", /* local symbols for ARM, MIPS, etc. */
- ".LASANPC", /* s390 kasan local symbols */
+ ".L", /* local labels, .LBB,.Ltmpxxx,.L__unnamed_xx,.LASANPC, etc. */
"__crc_", /* modversions */
"__efistub_", /* arm64 EFI stub namespace */
- "__kvm_nvhe_", /* arm64 non-VHE KVM namespace */
+ "__kvm_nvhe_$", /* arm64 local symbols in non-VHE KVM namespace */
+ "__kvm_nvhe_.L", /* arm64 local symbols in non-VHE KVM namespace */
"__AArch64ADRPThunk_", /* arm64 lld */
"__ARMV5PILongThunk_", /* arm lld */
"__ARMV7PILongThunk_",
This change is part of below commits and will handle the
symbols with “.L”
commit d4c8586432 ("kallsyms: ignore all local labels prefixed by '.L'")
commit 6ccf9cb557 ("KVM: arm64: Symbolize the nVHE HYP addresses")
Update the testcase function to include the new changes.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220928045218.37322-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the board info structures from the glue drivers to the
common library and hence deduplicate configuration data.
For the Intel Braswell case the ACPI version should be used.
Because switch to ACPI/PCI is done in BIOS while quite likely
the rest of AML code is the same, meaning similar issue might
be observed. There is no bug report due to no PCI enabled device
in the wild, Andy thinks, and only reference boards can be tested,
so nobody really cares about Intel Braswell PCI case.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The generate_guest_id function is more suitable for use after the
following modifications.
1. The return value of the function is modified to u64.
2. Remove the d_info1 and d_info2 parameters from the function, keep the
u64 type kernel_version parameter.
3. Rename the function to make it clearly a Hyper-V related function,
and modify it to hv_generate_guest_id.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220928064046.3545-1-kunyu@nfschina.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
IRQCHIP_PLATFORM_DRIVER_* doesn't allow some fields (such as .pm)
to be set in the platform_driver structure.
Make IRQCHIP_PLATFORM_DRIVER_END variadic so that .pm or another
field can be set if needed.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[maz: revamped commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220922161246.20586-3-Frank.Li@nxp.com
The interrupt-map property for "realtek,rtl-intc" has been deprecated in
favor of a list of parent interrupts. Drop the open-coded parser for
interrupt-map, and use the first parent interrupt instead. If no parent
was provided, the driver will assume that this is the first hardware
interrupt of the SoC's MIPS CPU for compatibility with the legacy binding.
All SoC interrupts were treated equally, independent of which output
they were actually routed to. This means the driver might as well route
all interrupts to the first output, and achieve the same behaviour.
Without the interrupt-map property, interrupt usage information is no
longer available at initialisation. Routing setup will now happen later,
when a hardware interrupt is mapped by the subsystem.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/5f901a82eaa9d97cadf6e9b73a894a92f3f83b7c.1663617425.git.sander@svanheule.net
The interrupt router has 32 inputs, and up to 15 outputs connected to
the MIPS CPU's interrupts. The way these are mapped to each other is
runtime configurable. This controller can also mask individual interrupt
sources, and has a status register to indicate pending interrupts. This
means the controller is not transparent, and the use of "interrupt-map"
inappropriate. Instead, a list of parent interrupts should be specified.
Two-part compatibles are introduced to be able to require "interrupts"
for new devicetrees. For backward compatibility "interrupt-map" is still
allowed on these new compatibles, but deprecated. The old compatible,
with required "interrupt-map" and "#address-cells", is also deprecated.
The relevant descriptions are added or extended to more clearly describe
the functionality of this controller.
To prevent spurious changes to the binding when more SoCs are added,
"allOf" is used with one "if", and the compatible enum only has one
item.
The example is updated to provide a correct example for RTL8380 SoCs.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/ba3ae8e521ef82dd94f18a602ef53078f4a0d8d5.1663617425.git.sander@svanheule.net
The data storage interrupt (DSI) error will be generated when the
paste operation is issued on the suspended Nest Accelerator (NX)
window due to NX state changes. The hypervisor expects the
partition to ignore this error during page fault handling.
To differentiate DSI caused by an actual HW configuration or by
the NX window, a new “ibm,pi-features” type value is defined.
Byte 0, bit 3 of pi-attribute-specifier-type is now defined to
indicate this DSI error. If this error is not ignored, the user
space can get SIGBUS when the NX request is issued.
This patch adds changes to read ibm,pi-features property and ignore
DSI error during page fault handling if MMU_FTR_NX_DSI is defined.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Mention PAPR version in comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b9cd844b85eb8f70459109ce1b14e44c4cc85fa7.camel@linux.ibm.com
On little endian the stack frame marker appears reversed when dumping
memory sequentially, as is typical in xmon or gdb, eg:
c000000004733e40 0000000000000000 0000000000000000 |................|
c000000004733e50 0000000000000000 0000000000000000 |................|
c000000004733e60 0000000000000000 0000000000000000 |................|
c000000004733e70 5347455200000000 0000000000000000 |SGER............|
c000000004733e80 a700000000000000 708897f7ff7f0000 |........p.......|
c000000004733e90 0073428fff7f0000 208997f7ff7f0000 |.sB..... .......|
c000000004733ea0 0100000000000000 ffffffffffffffff |................|
c000000004733eb0 0000000000000000 0000000000000000 |................|
To make it easier to recognise, reverse the value on little endian, so
it always appears as "REGS", eg:
c000000004733e70 5245475300000000 0000000000000000 |REGS............|
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220927150419.1503001-2-mpe@ellerman.id.au
Now that the stack frame regs marker is only 32-bits it is not as
obvious in memory dumps and easier to miss, eg:
c000000004733e40 0000000000000000 0000000000000000 |................|
c000000004733e50 0000000000000000 0000000000000000 |................|
c000000004733e60 0000000000000000 0000000000000000 |................|
c000000004733e70 7367657200000000 0000000000000000 |sger............|
c000000004733e80 a700000000000000 708897f7ff7f0000 |........p.......|
c000000004733e90 0073428fff7f0000 208997f7ff7f0000 |.sB..... .......|
c000000004733ea0 0100000000000000 ffffffffffffffff |................|
c000000004733eb0 0000000000000000 0000000000000000 |................|
So make it upper case to make it stand out a bit more:
c000000004733e70 5347455200000000 0000000000000000 |SGER............|
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220927150419.1503001-1-mpe@ellerman.id.au
I found a null pointer reference in arch_prepare_kprobe():
# echo 'p cmdline_proc_show' > kprobe_events
# echo 'p cmdline_proc_show+16' >> kprobe_events
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc000000000050bfc
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 122 Comm: sh Not tainted 6.0.0-rc3-00007-gdcf8e5633e2e #10
NIP: c000000000050bfc LR: c000000000050bec CTR: 0000000000005bdc
REGS: c0000000348475b0 TRAP: 0300 Not tainted (6.0.0-rc3-00007-gdcf8e5633e2e)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 88002444 XER: 20040006
CFAR: c00000000022d100 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 0
...
NIP arch_prepare_kprobe+0x10c/0x2d0
LR arch_prepare_kprobe+0xfc/0x2d0
Call Trace:
0xc0000000012f77a0 (unreliable)
register_kprobe+0x3c0/0x7a0
__register_trace_kprobe+0x140/0x1a0
__trace_kprobe_create+0x794/0x1040
trace_probe_create+0xc4/0xe0
create_or_delete_trace_kprobe+0x2c/0x80
trace_parse_run_command+0xf0/0x210
probes_write+0x20/0x40
vfs_write+0xfc/0x450
ksys_write+0x84/0x140
system_call_exception+0x17c/0x3a0
system_call_vectored_common+0xe8/0x278
--- interrupt: 3000 at 0x7fffa5682de0
NIP: 00007fffa5682de0 LR: 0000000000000000 CTR: 0000000000000000
REGS: c000000034847e80 TRAP: 3000 Not tainted (6.0.0-rc3-00007-gdcf8e5633e2e)
MSR: 900000000280f033 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 44002408 XER: 00000000
The address being probed has some special:
cmdline_proc_show: Probe based on ftrace
cmdline_proc_show+16: Probe for the next instruction at the ftrace location
The ftrace-based kprobe does not generate kprobe::ainsn::insn, it gets
set to NULL. In arch_prepare_kprobe() it will check for:
...
prev = get_kprobe(p->addr - 1);
preempt_enable_no_resched();
if (prev && ppc_inst_prefixed(ppc_inst_read(prev->ainsn.insn))) {
...
If prev is based on ftrace, 'ppc_inst_read(prev->ainsn.insn)' will occur
with a null pointer reference. At this point prev->addr will not be a
prefixed instruction, so the check can be skipped.
Check if prev is ftrace-based kprobe before reading 'prev->ainsn.insn'
to fix this problem.
Fixes: b4657f7650 ("powerpc/kprobes: Don't allow breakpoints on suffixes")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
[mpe: Trim oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220923093253.177298-1-lihuafei1@huawei.com
Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The SPI core DMA mapping support performs cache management once for the
entire message and not between transfers, and this leads to cache
corruption if a message has two or more RX transfers with both
transfers targeting the same cache line, and the controller driver
decides to handle one using DMA and the other using PIO (for example,
because one is much larger than the other).
Fix it by syncing before/after the actual transfers. This also means
that we can skip the sync during the map/unmap of the message.
Fixes: 99adef310f ("spi: Provide core support for DMA mapping transfers")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220927112117.77599-3-vincent.whitchurch@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function __ata_change_queue_depth() uses the helper
ata_scsi_find_dev() to get the ata_device structure of a scsi device and
set that device maximum queue depth. However, when the ata device is
managed by libsas, ata_scsi_find_dev() returns NULL, turning
__ata_change_queue_depth() into a nop, which prevents the user from
setting the maximum queue depth of ATA devices used with libsas based
HBAs.
Fix this by renaming __ata_change_queue_depth() to
ata_change_queue_depth() and adding a pointer to the ata_device
structure of the target device as argument. This pointer is provided by
ata_scsi_change_queue_depth() using ata_scsi_find_dev() in the case of
a libata managed device and by sas_change_queue_depth() using
sas_to_ata_dev() in the case of a libsas managed ata device.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: John Garry <john.garry@huawei.com>
For SATA devices supporting NCQ, drivers using libsas first initialize a
scsi device queue depth based on the controller and device capabilities,
leading to the scsi device queue_depth field being 32 (ATA maximum queue
depth) for most setup. However, if libata was loaded using the
force=[ID]]noncq argument, the default queue depth should be set to 1 to
reflect the fact that queuable commands will never be used. This is
consistent with manually setting a device queue depth to 1 through sysfs
as that disables NCQ use for the device.
Fix ata_scsi_dev_config() to honor the noncq parameter by sertting the
device queue depth to 1 for devices that do not have the ATA_DFLAG_NCQ
flag set.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: John Garry <john.garry@huawei.com>
