To pick the trivial change in:
0683b53197 ("signal: Deliver all of the siginfo perf data in _perf")
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the trivial change in:
63c8af5687 ("block: uapi: fix comment about block device ioctl")
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the set-speed request which erroneously used USB_DIR_IN and update
the default timeout argument to match (same value).
Fixes: 5638e4d92e ("USB: add PlayStation 2 Trance Vibrator driver")
Cc: stable@vger.kernel.org # 2.6.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210521133109.17396-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan writes:
USB-serial fixes for 5.13-rc3
Here are some new device ids for various drivers.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.13-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: pl2303: add device id for ADLINK ND-6530 GC
USB: serial: ti_usb_3410_5052: add startech.com device id
USB: serial: option: add Telit LE910-S1 compositions 0x7010, 0x7011
USB: serial: ftdi_sio: add IDs for IDS GmbH Products
Pull MMC host fixes from Ulf Hansson:
- Fix SD-card detection on Intel NUC10i3FNK4 (GL9755)
- Replace WARN_ONCE with dev_warn_once for scatterlist offsets
- Extend check of scatterlist size alignment with SD_IO_RW_EXTENDED
* tag 'mmc-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci-gli: increase 1.8V regulator wait
mmc: meson-gx: also check SD_IO_RW_EXTENDED for scatterlist size alignment
mmc: meson-gx: make replace WARN_ONCE with dev_warn_once about scatterlist offset alignment
Pull devicetree fixes from Rob Herring:
- Another batch of removing unneeded type references in schemas
- Fix some out of date filename references
- Convert renesas,drif schema to use DT graph schema
* tag 'devicetree-fixes-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: More removals of type references on common properties
dt-bindings: media: renesas,drif: Use graph schema
leds: Fix reference file name of documentation
dt-bindings: phy: cadence-torrent: update reference file of docs
Pull siginfo fix from Eric Biederman:
"During the merge window an issue with si_perf and the siginfo ABI came
up. The alpha and sparc siginfo structure layout had changed with the
addition of SIGTRAP TRAP_PERF and the new field si_perf.
The reason only alpha and sparc were affected is that they are the
only architectures that use si_trapno.
Looking deeper it was discovered that si_trapno is used for only a few
select signals on alpha and sparc, and that none of the other
_sigfault fields past si_addr are used at all. Which means technically
no regression on alpha and sparc.
While the alignment concerns might be dismissed the abuse of si_errno
by SIGTRAP TRAP_PERF does have the potential to cause regressions in
existing userspace.
While we still have time before userspace starts using and depending
on the new definition siginfo for SIGTRAP TRAP_PERF this set of
changes cleans up siginfo_t.
- The si_trapno field is demoted from magic alpha and sparc status
and made an ordinary union member of the _sigfault member of
siginfo_t. Without moving it of course.
- si_perf is replaced with si_perf_data and si_perf_type ending the
abuse of si_errno.
- Unnecessary additions to signalfd_siginfo are removed"
* 'for-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signalfd: Remove SIL_PERF_EVENT fields from signalfd_siginfo
signal: Deliver all of the siginfo perf data in _perf
signal: Factor force_sig_perf out of perf_sigtrap
signal: Implement SIL_FAULT_TRAPNO
siginfo: Move si_trapno inside the union inside _si_fault
Pull module fix from Jessica Yu:
"When CONFIG_MODULE_UNLOAD=n, module exit sections get sorted into the
init region of the module in order to satisfy the requirements of
jump_labels and static_calls.
Previously, the exit section check was done in module_init_section(),
but the solution there is not completely arch-indepedent as ARM is a
special case and supplies its own module_init_section() function.
Instead of pushing this logic further to the arch-specific code,
switch to an arch-independent solution to check for module exit
sections in the core module loader code in layout_sections() instead"
* tag 'modules-for-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: check for exit sections in layout_sections() instead of module_init_section()
Pull OpenRISC fixes from Stafford Horne:
"A few fixes that came in around the time of the merge window"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: Define memory barrier mb
openrisc: mm/init.c: remove unused variable 'end' in paging_init()
openrisc: mm/init.c: remove unused memblock_region variable in map_ram()
openrisc: Fix a memory leak
Add separate init function to call the existing controls_create
function so a custom error can be displayed if initialisation fails.
Use info level instead of error for notifications.
Display the VID/PID so device_setup is targeted to the right device.
Display "enabled" message to easily confirm that the driver is loaded.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/b5d140c65f640faf2427e085fbbc0297b32e5fce.1621584566.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the UAC2_CS_CUR request which erroneously used usb_sndctrlpipe().
Fixes: 93db51d06b ("ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3")
Cc: stable@vger.kernel.org # 5.10
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210521133742.18098-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added a sysfs entry to support writing to the offset register on page1.
This register is used to calibrate the chip canceling offset errors in the
current ADC. This means that, over time, reading the IAD register will not
return the correct current measurement, it will have an offset. Writing to
the offset register if the two's complement of the current register while
passing zero current to the load will calibrate the measurements. This
change was tested on real hardware and it was able to calibrate the chip
correctly.
Signed-off-by: Luiz Sampaio <sampaio.ime@gmail.com>
Link: https://lore.kernel.org/r/20210519223046.13798-7-sampaio.ime@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit caa93d9bd2 ("usb: Fix up movement of USB core kerneldoc location")
removed the reference to the _usb_header label by mistake, which causes the
following htmldocs build warning:
Documentation/driver-api/usb/writing_usb_driver.rst:129: WARNING: undefined label: usb_header
Restore the label.
Fixes: caa93d9bd2 ("usb: Fix up movement of USB core kerneldoc location")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210521013608.17957-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/staging/comedi/drivers/ni_routes.c:249: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/staging/comedi/drivers/ni_routes.c:398: warning: Function parameter or member 'routes' not described in 'ni_route_set_has_source'
drivers/staging/comedi/drivers/ni_routes.c:398: warning: Function parameter or member 'source' not described in 'ni_route_set_has_source'
drivers/staging/comedi/drivers/ni_routes.c:524: warning: Function parameter or member 'src_sel_reg_value' not described in 'ni_find_route_source'
drivers/staging/comedi/drivers/ni_routes.c:524: warning: Function parameter or member 'dest' not described in 'ni_find_route_source'
drivers/staging/comedi/drivers/ni_routes.c:524: warning: Function parameter or member 'tables' not described in 'ni_find_route_source'
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Cc: "Spencer E. Olson" <olsonse@umich.edu>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210520122538.3470259-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's possible that the interrupt handler for the UCSI driver signals a
connector changes after the handler clears the PENDING bit, but before
it has sent the acknowledge request. The result is that the handler is
invoked yet again, to ack the same connector change.
At least some versions of the Qualcomm UCSI firmware will not handle the
second - "spurious" - acknowledgment gracefully. So make sure to not
clear the pending flag until the change is acknowledged.
Any connector changes coming in after the acknowledgment, that would
have the pending flag incorrectly cleared, would afaict be covered by
the subsequent connector status check.
Fixes: 217504a055 ("usb: typec: ucsi: Work around PPM losing change information")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-By: Benjamin Berg <bberg@redhat.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210516040953.622409-1-bjorn.andersson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In typec_mux_match() "nval" is assigned the number of elements in the
"svid" fwnode property, then the variable is used to store the success
of the read and finally attempts to loop between 0 and "success" - i.e.
not at all - and the code returns indicating that no match was found.
Fix this by using a separate variable to track the success of the read,
to allow the loop to get a change to find a match.
Fixes: 96a6d031ca ("usb: typec: mux: Find the muxes by also matching against the device node")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210516034730.621461-1-bjorn.andersson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow SPI peripherals attached to this controller to know what is the
maximum transfer size and message size, so they can limit their transfer
lengths properly in case they are otherwise capable of larger transfer
sizes. For the sc18is602, this is 200 bytes in both cases, since as far
as I understand, it isn't possible to tell the controller to keep the
chip select asserted after the STOP command is sent.
The controller can support SPI messages larger than 200 bytes if
cs_change is set for individual transfers such that the portions with
chip select asserted are never longer than 200 bytes. What is not
supported is just SPI messages with a continuous chip select larger than
200. I don't think it is possible to express this using the current API,
so drivers which do send SPI messages with cs_change can safely just
look at the max_transfer_size limit.
An example of user for this is sja1105_xfer() in
drivers/net/dsa/sja1105/sja1105_spi.c which sends by default 64 * 4 =
256 byte transfers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210520131238.2903024-3-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For each spi_message, the sc18is602 I2C-to-SPI bridge driver checks the
length of each spi_transfer against 200 (the size of the chip's internal
buffer) minus hw->tlen (the number of bytes transferred so far).
The first byte of the transferred data is the Function ID (the SPI
slave's chip select) and as per the documentation of the chip:
https://www.nxp.com/docs/en/data-sheet/SC18IS602B.pdf
the data buffer is up to 200 bytes deep _without_ accounting for the
Function ID byte.
However, in sc18is602_txrx(), the driver keeps the Function ID as part
of the buffer, and increments hw->tlen from 0 to 1. Combined with the
check in sc18is602_check_transfer, this prevents us from issuing a
transfer that has exactly 200 bytes in size, but only 199.
Adjust the check function to reflect that the Function ID is not part of
the 200 byte deep data buffer.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210520131238.2903024-2-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soundwire fixes for v5.13
Fix in qcom driver for handling of qcom,ports-block-pack-mode property.
This fixes regression reported in DragonBoard DB845c and Lenovo Yoga
C630.
* tag 'soundwire-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: qcom: fix handling of qcom,ports-block-pack-mode
When multiple PCI devices get assigned to a guest right at boot, libxl
incrementally populates the backend tree. The writes for the first of
the devices trigger the backend watch. In turn xen_pcibk_setup_backend()
will set the XenBus state to Initialised, at which point no further
reconfigures would happen unless a device got hotplugged. Arrange for
reconfigure to also get triggered from the backend watch handler.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/2337cbd6-94b9-4187-9862-c03ea12e0c61@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The commit referenced below was incomplete: It merely affected what
would get written to the vdev-<N> xenstore node. The guest would still
find the function at the original function number as long as
__xen_pcibk_get_pci_dev() wouldn't be in sync. The same goes for AER wrt
__xen_pcibk_get_pcifront_dev().
Undo overriding the function to zero and instead make sure that VFs at
function zero remain alone in their slot. This has the added benefit of
improving overall capacity, considering that there's only a total of 32
slots available right now (PCI segment and bus can both only ever be
zero at present).
Fixes: 8a5248fe10 ("xen PV passthru: assign SR-IOV virtual functions to separate virtual slots")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/8def783b-404c-3452-196d-3f3fd4d72c9e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
xen_setup_gdt(), via xen_load_gdt_boot(), wants to adjust page tables.
For this to work when NX is not available, x86_configure_nx() needs to
be called first.
[jgross] Note that this is a revert of 36104cb901 ("x86/xen:
Delay get_cpu_cap until stack canary is established"), which is possible
now that we no longer support running as PV guest in 32-bit mode.
Cc: <stable.vger.kernel.org> # 5.9
Fixes: 36104cb901 ("x86/xen: Delay get_cpu_cap until stack canary is established")
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/12a866b0-9e89-59f7-ebeb-a2a6cec0987a@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
