- dev_dbg cleanup (Thomas Weißschuh)
- cleanup i2c-hid-acpi (Andy Shevchenko)
- goodix: revert/fixes for an actual production device compared to the
manufacturer sample (Douglas Anderson)
- constify hid_ll_driver (Thomas Weißschuh)
- map standard Battery System Charging to upower (José Expósito)
- couple of assorted fixes and new handling of HID usages (Jingyuan
Liang & Ronald Tschalär)
Here is the stack where we allocate percpu counter block:
+-< __alloc_percpu
+-< xt_percpu_counter_alloc
+-< find_check_entry # {arp,ip,ip6}_tables.c
+-< translate_table
And it can be leaked on this code path:
+-> ip6t_register_table
+-> translate_table # allocates percpu counter block
+-> xt_register_table # fails
there is no freeing of the counter block on xt_register_table fail.
Note: xt_percpu_counter_free should be called to free it like we do in
do_replace through cleanup_entry helper (or in __ip6t_unregister_table).
Probability of hitting this error path is low AFAICS (xt_register_table
can only return ENOMEM here, as it is not replacing anything, as we are
creating new netns, and it is hard to imagine that all previous
allocations succeeded and after that one in xt_register_table failed).
But it's worth fixing even the rare leak.
Fixes: 71ae0dff02 ("netfilter: xtables: use percpu rule counters")
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Simple syscon devices may require deassertion of a reset signal in order
to access their register set. Rather than requiring a custom driver to
implement this, we can use the generic "resets" specifiers to link a
reset line to the syscon.
This change adds an optional reset line to the syscon device
description, and deasserts the reset if detected.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230105005010.124948-3-jk@codeconstruct.com.au
Simple syscon devices may require deassertion of a reset signal in order
to access their register set. This change adds the `resets` property from
reset.yaml#/properties/resets (referenced through core.yaml), specifying
a maxItems of 1 for a single (optional) reset descriptor.
This will allow a future change to the syscon driver to implement reset
control.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230105005010.124948-2-jk@codeconstruct.com.au
This removes a layer of indirection through pm_power_off() and allows
the PMIC handler to be used as a fallback when firmware power off fails.
This happens on boards like the Clockwork DevTerm R-01 where OpenSBI
does not know how to use the PMIC to power off the board.
Move the check for AXP288 to avoid registering a dummy handler.
Signed-off-by: Samuel Holland <samuel@sholland.org>
[Lee: Removed superfluous new line]
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221228162752.14204-1-samuel@sholland.org
TWL6032 has a few charging registers prepended before the charging
registers the TWL6030 has. To be able to use common register defines
declare the additional registers as additional module.
At the moment this affects the access to CHARGERUSB_CTRL1 in
phy-twl6030-usb. Without this patch, it is accessing the wrong register
on TWL6032.
The consequence is that presence of Vbus is not reported.
Cc: Bin Liu <b-liu@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221208215723.217557-1-andreas@kemnade.info
The cs5535-mfd driver uses CPU-specific data that is not available
for ARCH=um builds, so don't allow it to be built for UML.
Prevents these build errors:
In file included from ../arch/x86/include/asm/olpc.h:7,
from ../drivers/mfd/cs5535-mfd.c:17:
../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’:
../arch/x86/include/asm/geode.h:16:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
16 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:16:46: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
16 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:17:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’
17 | (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:18:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
18 | (boot_cpu_data.x86_model == 5));
../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’:
../arch/x86/include/asm/geode.h:23:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
23 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:23:46: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
23 | return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:24:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’
24 | (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:25:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
25 | (boot_cpu_data.x86_model == 10));
Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221201012541.11809-1-rdunlap@infradead.org
The power button can get "stuck" if the rising edge and falling edge irq
are read in the same pass. This can often be triggered when resuming
from suspend if the power button is released before the kernel handles
the interrupt.
Swapping the order of the rise and fall events makes sure that the press
event is handled first, which prevents this situation.
Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221208220225.635414-1-aren@peacevolution.org
plpks_is_available() can be called on any platform via kexec but calls
_plpks_get_config() which makes a hcall, which will only work on pseries.
Fix this by returning early in plpks_is_available() if hcalls aren't
possible.
Fixes: 119da30d03 ("powerpc/pseries: Expose PLPKS config values, support additional fields")
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230222021708.146257-1-ruscur@russell.cc
When we fail to send a FSF request in 'zfcp_fsf_req_send()' when calling
'zfcp_qdio_send()' we try to remove the request object from our internal
hash table again to prevent keeping a stale memory reference. This removal
might still - very much theoretically - fail.
To store some evidence of when this happens add a new trace record for
this case; tag: 'fsrsrmf'.
We reuse the 'ZFCP_DBF_HBA_RES' trace ID for this, but mark all fields
other then the request ID with ~0, to make fairly obvious that these are
invalid values. This faking has to be done because we don't have a valid
request object at this point, and can not safely access any of the memory
of the old object - we just failed to find it in our hash table, so it
might be gone already.
Here is an example of a decoded trace record:
Timestamp : 2023-02-17-13:09:12:748140
Area : HBA
Subarea : 1
Level : -
Exception : 000003ff7ff500c2
CPU ID : 0011
Caller : 0x0
Record ID : 1
Tag : fsrsrmf
Request ID : 0x0000000080126ab6
Request status : 0xffffffff
FSF cmnd : 0xffffffff
FSF sequence no: 0xffffffff
FSF issued : 2042-09-18-01:53:47:370495
FSF stat : 0xffffffff
FSF stat qual : ffffffff ffffffff ffffffff ffffffff
Prot stat : 0xffffffff
Prot stat qual : ffffffff ffffffff ffffffff ffffffff
Port handle : 0xffffffff
LUN handle : 0xffffffff
This provides at least some basic evidence that this event happened, and
what object was affected.
Link: https://lore.kernel.org/r/99b8246b2d71b63fa4f9c56333e2037502f7f5af.1677000450.git.bblock@linux.ibm.com
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We use different integer types throughout zfcp to store the FSF request ID
and related values; some places use 'unsigned long' and others 'u64'. On
s390x these are effectively the same type, but this might cause confusions
and is generally inconsistent.
The specification for the used hardware specifies this value as a 64-bit
number, and ultimately we use this value to communicate with the hardware,
so it makes sense to change the type of all these variables to 'u64' where
we can. The only exception being when we store it in the 'host_scribble'
field of a 'struct scsi_cmnd'; for this case we add a build time check to
make sure they are compatible.
Link: https://lore.kernel.org/r/9c9cbe5acc2b419a22dce2fed847e3db91b60201.1677000450.git.bblock@linux.ibm.com
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit c1af985d27 ("scsi: mpi3mr: Add Event acknowledgment logic")
introduced an array mrioc->evtack_cmds but initialization of the array
elements was missed. They are just zero cleared. The function
mpi3mr_complete_evt_ack() refers host_tag field of the elements. Due to the
zero value of the host_tag field, the function calls clear_bit() for
mrico->evtack_cmds_bitmap with wrong bit index. This results in memory
access to invalid address and "BUG: KASAN: use-after-free". This BUG was
observed at eHBA-9600 firmware update to version 8.3.1.0. To fix it, add
the missing initialization of mrioc->evtack_cmds.
Link: https://lore.kernel.org/r/20230214005019.1897251-5-shinichiro.kawasaki@wdc.com
Cc: stable@vger.kernel.org
Fixes: c1af985d27 ("scsi: mpi3mr: Add Event acknowledgment logic")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To allocate bitmaps, the mpi3mr driver calculates sizes of bitmaps using
byte as unit. However, bitmap helper functions assume that bitmaps are
allocated using unsigned long as unit. This gap causes memory access beyond
the bitmap sizes and results in "BUG: KASAN: slab-out-of-bounds". The BUG
was observed at firmware download to eHBA-9600. Call trace indicated that
the out-of-bounds access happened in find_first_zero_bit() called from
mpi3mr_send_event_ack() for miroc->evtack_cmds_bitmap.
To fix the BUG, do not use bytes to manage bitmap sizes. Instead, use
number of bits, and call bitmap helper functions which take number of bits
as arguments. For memory allocation, call bitmap_zalloc() instead of
kzalloc() and krealloc(). For memory free, call bitmap_free() instead of
kfree(). For zero clear, call bitmap_clear() instead of memset().
Remove three fields for bitmap byte sizes in struct scmd_priv which are no
longer required. Replace the field dev_handle_bitmap_sz with
dev_handle_bitmap_bits to keep number of bits of removepend_bitmap across
resize.
Link: https://lore.kernel.org/r/20230214005019.1897251-4-shinichiro.kawasaki@wdc.com
Fixes: c5758fc72b ("scsi: mpi3mr: Gracefully handle online FW update operation")
Fixes: e844adb1fb ("scsi: mpi3mr: Implement SCSI error handler hooks")
Fixes: c1af985d27 ("scsi: mpi3mr: Add Event acknowledgment logic")
Fixes: 824a156633 ("scsi: mpi3mr: Base driver code")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The function mpi3mr_get_all_tgt_info() has four issues:
1) It calculates valid entry length in alltgt_info assuming the header part
of the struct mpi3mr_device_map_info would equal to sizeof(u32). The
correct size is sizeof(u64).
2) When it calculates the valid entry length kern_entrylen, it excludes one
entry by subtracting 1 from num_devices.
3) It copies num_device by calling memcpy(). Substitution is enough.
4) It does not specify the calculated length to sg_copy_from_buffer().
Instead, it specifies the payload length which is larger than the
alltgt_info size. It causes "BUG: KASAN: slab-out-of-bounds".
Fix the issues by using the correct header size, removing the subtraction
from num_devices, replacing the memcpy() with substitution and specifying
the correct length to sg_copy_from_buffer().
Link: https://lore.kernel.org/r/20230214005019.1897251-2-shinichiro.kawasaki@wdc.com
Cc: stable@vger.kernel.org
Fixes: f5e6d5a343 ("scsi: mpi3mr: Add support for driver commands")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
