Add 3 new topology IPC ops for widget_setup, widget_free and dai_config
in order to make the pipeline management code IPC agnostic and implement
the ops for IPC3.
Use the newly introduced tplg dai_config op to configure the DAI during
BE DAI hw_params and hw_free.
Also, in preparation for IPC4, modify BE hw_params callback to skip
setting up the DAI widget. All widgets will be set up during FW
hw_params and the DAI_CONFIG IPC should be sent only if the widget
use_count is > 0. With setting up/freeing removed from the BE hw_params,
remove the configured flag as it is no longer needed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Throttled bios can't be issued after del_gendisk() is done, thus
it's better to cancel them immediately rather than waiting for
throttle is done.
For example, if user thread is throttled with low bps while it's
issuing large io, and the device is deleted. The user thread will
wait for a long time for io to return.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220318130144.1066064-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the whole lifetime of blkcg_gq instance, ->q will be referred, such
as, ->pd_free_fn() is called in blkg_free, and throtl_pd_free() still
may touch the request queue via &tg->service_queue.pending_timer which
is handled by throtl_pending_timer_fn(), so it is reasonable to grab
request queue's refcnt by blkcg_gq instance.
Previously blkcg_exit_queue() is called from blk_release_queue, and it
is hard to avoid the use-after-free. But recently commit 1059699f87 ("block:
move blkcg initialization/destroy into disk allocation/release handler")
is merged to for-5.18/block, it becomes simple to fix the issue by simply
grabbing request queue's refcnt.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220318130144.1066064-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In throtl_pending_timer_fn(), request queue is retrieved from throttle
data. And tg's pending timer is deleted synchronously when releasing the
associated blkg, at that time, throttle data may have been freed since
commit 1059699f87 ("block: move blkcg initialization/destroy into disk
allocation/release handler") moves freeing q->td to disk_release() from
blk_release_queue(). So use-after-free on q->td in throtl_pending_timer_fn
can be triggered.
Fixes the issue by:
- do nothing in case that disk is released, when there isn't any bio to
dispatch
- retrieve request queue from blkg instead of throttle data for
non top-level pending timer.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220318130144.1066064-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add test where sender sends two message, each with own
data pattern. Reader tries to read first to broken buffer:
it has three pages size, but middle page is unmapped. Then,
reader tries to read second message to valid buffer. Test
checks, that uncopied part of first message was dropped
and thus not copied as part of second message.
Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test for receive timeout check: connection is established,
receiver sets timeout, but sender does nothing. Receiver's
'read()' call must return EAGAIN.
Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalle Valo says:
====================
wireless-next patches for v5.18
Third set of patches for v5.18. Smaller set this time, support for
mt7921u and some work on MBSSID support. Also a workaround for rfkill
userspace event.
Major changes:
mac80211
* MBSSID beacon handling in AP mode
rfkill
* make new event layout opt-in to workaround buggy user space
rtlwifi
* support On Networks N150 device id
mt76
* mt7915: MBSSID and 6 GHz band support
* new driver mt7921u
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The signal a task should continue with after a ptrace stop is
inconsistently read, cleared, and sent. Solve this by reading and
clearing the signal to be sent in ptrace_stop.
In an ideal world everything except ptrace_signal would share a common
implementation of continuing with the signal, so ptracers could count
on the signal they ask to continue with actually being delivered. For
now retain bug compatibility and just return with the signal number
the ptracer requested the code continue with.
Link: https://lkml.kernel.org/r/875yoe7qdp.fsf_-_@email.froward.int.ebiederm.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Jakub Sitnicki says:
====================
I think we have reached a consensus [1] on how the test for the 4-byte load from
bpf_sock->dst_port and bpf_sk_lookup->remote_port should look, so here goes v3.
I will submit a separate set of patches for bpf_sk_lookup->remote_port tests.
This series has been tested on x86_64 and s390 on top of recent bpf-next -
ad13baf456 ("selftests/bpf: Test subprog jit when toggle bpf_jit_harden
repeatedly").
[1] https://lore.kernel.org/bpf/87k0cwxkzs.fsf@cloudflare.com/
v2 -> v3:
- Split what was previously patch 2 which was doing two things
- Use BPF_TCP_* constants (Martin)
- Treat the result of 4-byte load from dst_port as a 16-bit value (Martin)
- Typo fixup and some rewording in patch 4 description
v1 -> v2:
- Limit read_sk_dst_port only to client traffic (patch 2)
- Make read_sk_dst_port pass on litte- and big-endian (patch 3)
v1: https://lore.kernel.org/bpf/20220225184130.483208-1-jakub@cloudflare.com/
v2: https://lore.kernel.org/bpf/20220227202757.519015-1-jakub@cloudflare.com/
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
cgroup_skb/egress programs which sock_fields test installs process packets
flying in both directions, from the client to the server, and in reverse
direction.
Recently added dst_port check relies on the fact that destination
port (remote peer port) of the socket which sends the packet is known ahead
of time. This holds true only for the client socket, which connects to the
known server port.
Filter out any traffic that is not egressing from the client socket in the
BPF program that tests reading the dst_port.
Fixes: 8f50f16ff3 ("selftests/bpf: Extend verifier and bpf_sock tests for dst_port loads")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-3-jakub@cloudflare.com
The helper macro that records an error in BPF programs that exercise sock
fields access has been inadvertently broken by adaptation work that
happened in commit b18c1f0aa4 ("bpf: selftest: Adapt sock_fields test to
use skel and global variables").
BPF_NOEXIST flag cannot be used to update BPF_MAP_TYPE_ARRAY. The operation
always fails with -EEXIST, which in turn means the error never gets
recorded, and the checks for errors always pass.
Revert the change in update flags.
Fixes: b18c1f0aa4 ("bpf: selftest: Adapt sock_fields test to use skel and global variables")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-2-jakub@cloudflare.com
Today ptrace_message is easy to overlook as it not a core part of
ptrace_stop. It has been overlooked so much that there are places
that set ptrace_message and don't clear it, and places that never set
it. So if you get an unlucky sequence of events the ptracer may be
able to read a ptrace_message that does not apply to the current
ptrace stop.
Move setting of ptrace_message into ptrace_stop so that it always gets
set before the stop, and always gets cleared after the stop. This
prevents non-sense from being reported to userspace and makes
ptrace_message more visible in the ptrace helper functions so that
kernel developers can see it.
Link: https://lkml.kernel.org/r/87bky67qfv.fsf_-_@email.froward.int.ebiederm.org
Acked-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The '.type' field is initialized both in place and in the macro
as reported by this W=1 warning:
arch/arm64/include/asm/cpufeature.h:281:9: error: initialized field overwritten [-Werror=override-init]
281 | (ARM64_CPUCAP_SCOPE_LOCAL_CPU | ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU)
| ^
arch/arm64/kernel/cpu_errata.c:136:17: note: in expansion of macro 'ARM64_CPUCAP_LOCAL_CPU_ERRATUM'
136 | .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM, \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm64/kernel/cpu_errata.c:145:9: note: in expansion of macro 'ERRATA_MIDR_RANGE'
145 | ERRATA_MIDR_RANGE(m, var, r_min, var, r_max)
| ^~~~~~~~~~~~~~~~~
arch/arm64/kernel/cpu_errata.c:613:17: note: in expansion of macro 'ERRATA_MIDR_REV_RANGE'
613 | ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2),
| ^~~~~~~~~~~~~~~~~~~~~
arch/arm64/include/asm/cpufeature.h:281:9: note: (near initialization for 'arm64_errata[18].type')
281 | (ARM64_CPUCAP_SCOPE_LOCAL_CPU | ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU)
| ^
Remove the extranous initializer.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 1dd498e5e2 ("KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata")
Link: https://lore.kernel.org/r/20220316183800.1546731-1-arnd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.
The __setup() handler interface isn't meant to handle negative return
values -- they are non-zero, so they mean "handled" (like a return
value of 1 does), but that's just a quirk. So return 1 from
parse_pmtmr(). Also print a warning message if kstrtouint() returns
an error.
Fixes: 6b148507d3 ("pmtmr: allow command line override of ioport")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The newly introduced TRAMP_VALIAS definition causes a build warning
with clang-14:
arch/arm64/include/asm/vectors.h:66:31: error: arithmetic on a null pointer treated as a cast from integer to pointer is a GNU extension [-Werror,-Wnull-pointer-arithmetic]
return (char *)TRAMP_VALIAS + SZ_2K * slot;
Change the addition to something clang does not complain about.
Fixes: bd09128d16 ("arm64: Add percpu vectors for EL1")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220316183833.1563139-1-arnd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In VT_ACTIVATE an almost identical code path has been patched
with array_index_nospec. In the VT_DISALLOCATE path, the arg is
the user input from a system call argument and lately used as a index
for vc_cons[index].d access, which can be reached through path like
vt_disallocate->vc_busy or vt_disallocate->vc_deallocate.
For consistency both code paths should have the same mitigations
applied. Also, the code style is adjusted as suggested by Jiri.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220314122921.31223-1-xiam0nd.tong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
