The number of policies are 10, so can't be supported by the bitmap size
of u8.
Even though there are no platfoms with these many policies, but
for correctness increase to u32.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 16fc8eca19 ("thermal/int340x_thermal: Add additional UUIDs")
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI specification says that OSPM should refuse to restore from
hibernate if the hardware signature changes, and should boot from
scratch. However, real BIOSes often vary the hardware signature in cases
where we *do* want to resume from hibernate, so Linux doesn't follow the
spec by default.
However, in a virtual environment there's no reason for the VMM to vary
the hardware signature *unless* it wants to trigger a clean reboot as
defined by the ACPI spec. So enable the check by default if a hypervisor
is detected.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For some specific platforms (E.g. AlderLake) the balance performance
EPP is updated from the hard coded value in the driver. This acts as
the default and balance_performance EPP. The purpose of this EPP
update is to reach maximum 1 core turbo frequency (when possible) out
of the box.
Although we can achieve the objective by using hard coded value in the
driver, there can be other EPP which can be better in terms of power.
But that will be very subjective based on platform and use cases.
This is not practical to have a per platform specific default hard coded
in the driver.
If a platform wants to specify default EPP, it can be set in the firmware.
If this EPP is not the chipset default of 0x80 (balance_perf_epp unless
driver changed it) and more performance oriented but not 0, the driver
can use this as the default and balanced_perf EPP. In this case no driver
update is required every time there is some new platform and default EPP.
If the firmware didn't update the EPP from the chipset default then
the hard coded value is used as per existing implementation.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kalle Valo says:
====================
wireless fixes for v5.17
Third set of fixes for v5.17. We have only one revert to fix an ath10k
regression.
* tag 'wireless-2022-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
Revert "ath10k: drop beacon and probe response which leak from other channel"
====================
Link: https://lore.kernel.org/r/20220316130249.B5225C340EC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We've previously run into many issues related to the latency of a Tx
timestamp completion with the ice hardware. It can be difficult to
determine the root cause of a slow Tx timestamp. To aid in this,
introduce new trace events which capture timing data about when the
driver reaches certain points while processing a transmit timestamp
* ice_tx_tstamp_request: Trace when the stack initiates a new timestamp
request.
* ice_tx_tstamp_fw_req: Trace when the driver begins a read of the
timestamp register in the work thread.
* ice_tx_tstamp_fw_done: Trace when the driver finishes reading a
timestamp register in the work thread.
* ice_tx_tstamp_complete: Trace when the driver submits the skb back to
the stack with a completed Tx timestamp.
These trace events can be enabled using the standard trace event
subsystem exposed by the ice driver. If they are disabled, they become
no-ops with no run time cost.
The following is a simple GNU AWK script which can highlight one
potential way to use the trace events to capture latency data from the
trace buffer about how long the driver takes to process a timestamp:
-----
BEGIN {
PREC=256
}
# Detect requests
/tx_tstamp_request/ {
time=strtonum($4)
skb=$7
# Store the time of request for this skb
requests[skb] = time
printf("skb %s: idx %d at %.6f\n", skb, idx, time)
}
# Detect completions
/tx_tstamp_complete/ {
time=strtonum($4)
skb=$7
idx=$9
if (skb in requests) {
latency = (time - requests[skb]) * 1000
printf("skb %s: %.3f to complete\n", skb, latency)
if (latency > 4) {
printf(">>> HIGH LATENCY <<<\n")
}
printf("\n")
} else {
printf("!!! skb %s (idx %d) at %.6f\n", skb, idx, time)
}
}
-----
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
kthread_create_worker() and tty_alloc_driver() return ERR_PTR()
and never return NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Fixes: 43113ff734 ("ice: add TTY for GNSS module for E810T device")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The comment about the page always being locked is wrong, so copy
the locking protection from __set_page_dirty_buffers(). That
means moving the call to nilfs_set_file_dirty() down the
function so as to not acquire a new dependency between the
mapping->private_lock and the ns_inode_lock. That might be a
harmless dependency to add, but it's not necessary.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Fix the following warning as reported by smatch:
smatch warnings:
drivers/net/ethernet/intel/ice/ice_switch.c:5568 ice_find_dummy_packet() warn: inconsistent indenting
Fixes: 9a225f81f5 ("ice: Support GTP-U and GTP-C offload in switchdev")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Firmware initialization can take a while. Move mt7921_init_hw routine in
a dedicated work in order to not slow down bootstrap process.
Tested-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce __mt76u_init unitility routine and move mt7615 usb bus ops
into mt7615 module in order to allow specifying driver specific
parameter.
This is a preliminary patch to add usb support to mt7921 driver.
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Some of beamforming mib counters are moved to different offsets
or registers in newer chipsets.
Fixes: 99ad32a4ca ("mt76: mt7915: add support for MT7986")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Drop invalid rssi value to calculate a reasonable report
Fixes: 4550fb9e98 ("mt76: improve signal strength reporting")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Switch to use le32/16_get_bits() to simplfy codes and specify
the size explicitly to avoid potential issues.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Don't populate the read-only array ba_range on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
If devm_pinctrl_get() fails then it leads to an error pointer
dereference. Add a check to prevent that.
Fixes: 99ad32a4ca ("mt76: mt7915: add support for MT7986")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
A-die 7976 has different offset and uses different channel group
definition on txpower init values.
Fixes: 99ad32a4ca ("mt76: mt7915: add support for MT7986")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Since there are no HT & VHT IEs being sent in 6ghz,
some capabilities judgement and parsing for wtbl &
starec configuration should be modified to reflect such changes.
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Money Wang <Money.Wang@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This improves rate reach performance on units with polarized antennas.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7921s driver may receive frames with fragment buffers. If there is a
CTS packet received in monitor mode, the payload is 10 bytes only and
need 6 bytes header padding after RXD buffer. However, only RXD in the
first linear buffer, if we pull buffer size RXD-size+6 bytes with
skb_pull(), that would trigger "BUG_ON(skb->len < skb->data_len)" in
__skb_pull().
To avoid the nonlinear buffer issue, enlarge the RXD size from 128 to
256 to make sure all MCU operation in linear buffer.
[ 52.007562] kernel BUG at include/linux/skbuff.h:2313!
[ 52.007578] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 52.007987] pc : skb_pull+0x48/0x4c
[ 52.008015] lr : mt7921_queue_rx_skb+0x494/0x890 [mt7921_common]
[ 52.008361] Call trace:
[ 52.008377] skb_pull+0x48/0x4c
[ 52.008400] mt76s_net_worker+0x134/0x1b0 [mt76_sdio 35339a92c6eb7d4bbcc806a1d22f56365565135c]
[ 52.008431] __mt76_worker_fn+0xe8/0x170 [mt76 ef716597d11a77150bc07e3fdd68eeb0f9b56917]
[ 52.008449] kthread+0x148/0x3ac
[ 52.008466] ret_from_fork+0x10/0x30
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix mt7921_queues_acq implementation according to the vendor sdk.
Fixes: 474a9f21e2 ("mt76: mt7921: add debugfs support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The original single LDPC cap bit cannot be used to
differentiate LDPC cap in each PHY mode.
This modification split the single bit into 3 bits,
ht_ldpc, vht_ldpc, and he_ldpc.
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Suggested-by: Money Wang <Money.Wang@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Driver needs to carry region definition when radar detection starts.
Need to remap nl80211 DFS regions to chip region definition.
Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Rubio Lu <Rubio-DW.Lu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Properly set up the monitor mode the firmware can support to fix up
RTS/CTS and beacon frames cannot be captured and forwarded to the host.
Tested-by: Deren Wu <deren.wu@mediatek.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce mt7663u_mcu_power_on utility routine since the code is shared
between mt7663u_mcu_init() and mt7663u_probe().
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Check return value of mt7615_mcu_restart routine in mt7663u_mcu_init().
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
