Document compatible string 'mediatek,mt7986-thermal' for V3 thermal
unit found in MT7986 SoCs.
'mediatek,mt7981-thermal' is also added as it is identical with the
thermal unit of MT7986.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
The TMU TASR, TCALIVn, TRIM registers must be explicitly programmed with
calibration values in OCOTP. Add support for reading the OCOTP calibration
data and programming those into the TMU hardware.
The MX8MM/MX8MN TMUv1 uses only one OCOTP cell, while MX8MP TMUv2 uses 4,
the programming differs in each case.
Based on U-Boot commits:
70487ff386c ("imx8mm: Load fuse for TMU TCALIV and TASR")
ebb9aab318b ("imx: load calibration parameters from fuse for i.MX8MP")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
The TMU TASR, TCALIVn, TRIM registers must be explicitly programmed with
calibration values from OCOTP. Document optional phandle to OCOTP nvmem
provider.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
The current tsens debugfs structure is composed by:
- a tsens dir in debugfs with a version file
- a directory for each tsens istance with sensors file to dump all the
sensors value.
This works on the assumption that we have the same version for each
istance but this assumption seems fragile and with more than one tsens
istance results in the version file not tracking each of them.
A better approach is to just create a subdirectory for each tsens
istance and put there version and sensors debugfs file.
Using this new implementation results in less code since debugfs entry
are created only on successful tsens probe.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20221022125657.22530-4-ansuelsmth@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Convert the 'generic-adc-thermal' binding to DT schema format.
The binding said '#thermal-sensor-cells' should be 1, but all in tree
users are 0 and 1 doesn't make sense for a single channel.
Drop the example's related providers and consumers of the
'generic-adc-thermal' node as the convention is to not have those in
the examples.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221011175235.3191509-1-robh@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Provide task-analyzer test cases for all possible arguments and a subset of possible
combinations.
12 Tests in total.
test_basic:
- cmd:"perf script report task-analyzer"
- Fundamental test of script without arguments.
- Check for standard output.
test_ns_rename:
- cmd:"perf script report task-analyzer --ns --rename-comms-by-tids 0:random"
- Standard task with timestamps in nanoseconds and comm renamed.
- Check for standard output.
test_ms_filtertasks_highlight:
- cmd:"perf script report task-analyzer --ms --filter-tasks perf --highlight-tasks perf"
- Standard task with timestamps in milliseconds, task filtered out and highlighted.
- Check for standard output.
test_extended_times_timelimit_limittasks:
- cmd "perf script report task-analyzer --extended-times --time-limit :99999"
- Standard task with additional schedule out/in info and timlimit active at 99999.
- Check for extended table output.
test_summary:
- cmd:"perf script report task-analyzer --summary"
- Standard task with additional summary output.
- Check for summary print.
test_summary_extended:
- cmd:"perf script report task-analyzer --summary-extended"
- Standard task with summary and additional schedule in/out info.
- Chceck for extended table print.
test_summaryonly:
- cmd:"perf script report task-analyzer --summary-only"
- Only summary should be printed.
- Check for summary print.
test_extended_times_summary_ns:
- cmd:"perf script report task-analyzer --extended-times --summary --ns"
- Standard task with extended schedule in/out information and summary in ns.
- Check for extended table and summary.
test_csv:
- cmd:"perf script report task-analyzer --csv csv"
- Print standard task to csv file in csv format.
- Check for csv format.
test_csv_extended_times:
- cmd:"perf script report task-analyzer --csv csv --extended-times"
- Print standard task to csv file in csv format with additional schedule in/out
information.
- Check for additional information and csv format.
test_csvsummary:
- cmd:"perf script report task-analyzer --csv-summary csvsummary"
- Print summary to csvsummary file in csv format.
- Check for csv format.
test_csvsummary_extended:
- cmd:"perf script report task-analyzer --csv-summary csvsummary --summary-extended"
- Print summary to csvsummary file in csv format with additional schedule in/out
information.
- Check for additional information and csv format.
Suggested-by: Ian Rogers <irogers@google.com>
Signed-off-by: Petar Gligoric <petar.gligoric@rohde-schwarz.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221206154406.41941-4-petar.gligor@gmail.com
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the possibility to write the trace and the summary as csv files
to a user specified file. A format as such simplifies further data processing.
This is achieved by having ";" as separators instead of spaces and solely one
header per file.
Additional parameters are being considered, like in the normal usage of the
script. Colors are turned off in the case of a csv output, thus the highlight
option is also being ignored.
Usage:
Write standard task to csv file:
$ perf script report tasks-analyzer --csv <file>
write limited output to csv file in nanoseconds:
$ perf script report tasks-analyzer --csv <file> --ns --limit-to-tasks 1337
Write summary to a csv file:
$ perf script report tasks-analyzer --csv-summary <file>
Write summary to csv file with additional schedule information:
$ perf script report tasks-analyzer --csv-summary <file> --summary-extended
Write both summary and standard task to a csv file:
$ perf script report tasks-analyzer --csv --csv-summary
The following examples illustrate what is possible with the CSV output. The
first command sequence will record all scheduler switch events for 10 seconds,
the task-analyzer calculates task information like runtimes as CSV. A small
python snippet using pandas and matplotlib will visualize the most frequent
task (e.g. kworker/1:1) runtimes - each runtime as a bar in a bar chart:
$ perf record -e sched:sched_switch -a -- sleep 10
$ perf script report tasks-analyzer --ns --csv tasks.csv
$ cat << EOF > /tmp/freq-comm-runtimes-bar.py
import pandas as pd
import matplotlib.pyplot as plt
df = pd.read_csv("tasks.csv", sep=';')
most_freq_comm = df["COMM"].value_counts().idxmax()
most_freq_runtimes = df[df["COMM"]==most_freq_comm]["Runtime"]
plt.title(f"Runtimes for Task {most_freq_comm} in Nanoseconds")
plt.bar(range(len(most_freq_runtimes)), most_freq_runtimes)
plt.show()
$ python3 /tmp/freq-comm-runtimes-bar.py
As a seconds example, the subsequent script generates a pie chart of all
accumulated tasks runtimes for 10 seconds of system recordings:
$ perf record -e sched:sched_switch -a -- sleep 10
$ perf script report tasks-analyzer --csv-summary task-summary.csv
$ cat << EOF > /tmp/accumulated-task-pie.py
import pandas as pd
from matplotlib.pyplot import pie, axis, show
df = pd.read_csv("task-summary.csv", sep=';')
sums = df.groupby(df["Comm"])["Accumulated"].sum()
axis("equal")
pie(sums, labels=sums.index);
show()
EOF
$ python3 /tmp/accumulated-task-pie.py
A variety of other visualizations are possible in matplotlib and other
environments. Of course, pandas, numpy and co. also allow easy
statistical analysis of the data!
Signed-off-by: Petar Gligoric <petar.gligoric@rohde-schwarz.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221206154406.41941-3-petar.gligor@gmail.com
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new 'perf script' to analyze task scheduling behavior.
During the task analysis, some data is always needed - which goes beyond
the simple time of switching on and off a task (process/thread). This
concerns for example the runtime of a process or the frequency with
which the process was called. This script serves to simplify this
recurring analyze process. It immediately provides the user with helpful
task characteristic information about the tasks runtimes.
Usage:
Recorded can be in two ways:
$ perf script record tasks-analyzer -- sleep 10
$ perf record -e sched:sched_switch -a -- sleep 10
The script can parse all perf.data files, most important: sched:sched_switch
events are mandatory, other events will be ignored.
Most simple report use case is to just call the script without arguments:
$ perf script report tasks-analyzer
Switched-In Switched-Out CPU PID TID Comm Runtime Time Out-In
15576.658891407 15576.659156086 4 2412 2428 gdbus 265 1949
15576.659111320 15576.659455410 0 2412 2412 gnome-shell 344 2267
15576.659491326 15576.659506173 2 74 74 kworker/2:1 15 13145
15576.659506173 15576.659825748 2 2858 2858 gnome-terminal- 320 63263
15576.659871270 15576.659902872 6 20932 20932 kworker/u16:0 32 2314582
15576.659909951 15576.659945501 3 27264 27264 sh 36 -1
15576.659853285 15576.659971052 7 27265 27265 perf 118 5050741
[...]
What is not shown here are the ASCII color sequences. For example, if
the task consists of only one thread, the TID is grayed out.
Runtime is the time the task was running on the CPU, Time Out-In is the
time between the process being scheduled *out* and scheduled back *in*.
So the last time span between two executions. If -1 is printed, then the
task simply ran the first time in the measurements - a Out-In delta
could not be calculated.
In addition to the chronological representation, there is a summary on
task level. This output can be additionally switched on via the
--summary option and provides information such as max, min & average
runtime per process. The maximum runtime is often important for
debugging. The call looks like this:
$ perf script report tasks-analyzer --summary
Summary
Task Information Runtime Information
PID TID Comm Runs Accumulated Mean Median Min Max Max At
14 14 ksoftirqd/0 13 334 26 15 9 127 15571.621211956
15 15 rcu_preempt 133 1778 13 13 2 33 15572.581176024
16 16 migration/0 3 49 16 13 12 24 15571.608915425
20 20 migration/1 3 34 11 13 8 13 15571.639101555
25 25 migration/2 3 32 11 12 9 12 15575.639239896
[...]
Besides these two options, there are a number of other options that change the
output and behavior. This can be queried via --help. Options worth mentioning include:
- filter-tasks - filter out unneeded tasks, --filter-task 1337,/sbin/init
- highlight-tasks - more pleasant focusing, --highlight-tasks 1:red,mutt:yellow
- extended-times - show combinations of elapsed times between schedule in/schedule out
- summary-extended - summary with additional information, like maximum delta time statistics
- rename-comms-by-tids - handy for inexpressive processnames like python, --rename 1337:my-python-app
- ms - show timestamps in milliseconds, nanoseconds is also possible (--ns)
- time-limit - limit the analyzer to a time range, --time-limit 15576.0:15576.1
Script is tested and prime time ready for python2 & python3:
- make PYTHON=python3 prefix=/usr/local install
- make PYTHON=python2 prefix=/usr/local install
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221206154406.41941-2-petar.gligor@gmail.com
Signed-off-by: Petar Gligoric <petar.gligoric@rohde-schwarz.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -l/--lock-addr option is to implement per-lock-instance contention
stat using LOCK_AGGR_ADDR. It displays lock address and optionally
symbol name if exists.
$ sudo ./perf lock con -abl sleep 1
contended total wait max wait avg wait address symbol
1 36.28 us 36.28 us 36.28 us ffff92615d6448b8
9 10.91 us 1.84 us 1.21 us ffffffffbaed50c0 rcu_state
1 10.49 us 10.49 us 10.49 us ffff9262ac4f0c80
8 4.68 us 1.67 us 585 ns ffffffffbae07a40 jiffies_lock
3 3.03 us 1.45 us 1.01 us ffff9262277861e0
1 924 ns 924 ns 924 ns ffff926095ba9d20
1 436 ns 436 ns 436 ns ffff9260bfda4f60
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221209190727.759804-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the 'MetricExpr' json value is passed from the json
file to the pmu-events.c. This change introduces an expression
tree that is parsed into. The parsing is done largely by using
operator overloading and python's 'eval' function. Two advantages
in doing this are:
1) Broken metrics fail at compile time rather than relying on
`perf test` to detect. `perf test` remains relevant for checking
event encoding and actual metric use.
2) The conversion to a string from the tree can minimize the metric's
string size, for example, preferring 1e6 over 1000000, avoiding
multiplication by 1 and removing unnecessary whitespace. On x86
this reduces the string size by 2,930bytes (0.07%).
In future changes it would be possible to programmatically
generate the json expressions (a single line of text and so a
pain to write manually) for an architecture using the expression
tree. This could avoid copy-pasting metrics for all architecture
variants.
v4. Doesn't simplify "0*SLOTS" to 0, as the pattern is used to fix
Intel metrics with topdown events.
v3. Avoids generic types on standard types like set that aren't
supported until Python 3.9, fixing an issue with Python 3.6
reported-by John Garry. v3 also fixes minor pylint issues and adds
a call to Simplify on the read expression tree.
v2. Improvements to type information.
Committer notes:
Added one-line fixer from Ian, see first Link: tag below.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/CAP-5=fWa=zNK_ecpWGoGggHCQx7z-oW0eGMQf19Maywg0QK=4g@mail.gmail.com
Link: https://lore.kernel.org/r/20221207055908.1385448-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
