We use phy_set_bus_width() to set the lane rate that the PHY supports.
The controller driver may then use phy_get_bus_width() to fetch the
PHY lane rate in order to properly configure the controller.
Change-Id: I116f0d82ad187806914c0d566eab92b922f143ef
Signed-off-by: WeiYong Bi <bivvy.bi@rock-chips.com>
1) If using the third part PHY, we use phy_get_bus_width() to fetch the
PHY lane rate in order to properly configure the controller.
2) Removed unneeded code.
Change-Id: I5c245e65f58665aa5fc025d6579e8bb331554458
Signed-off-by: WeiYong Bi <bivvy.bi@rock-chips.com>
In future it will be modified to support more rockchip platforms.
Change-Id: I5cd7ce555eefe08b12fbfcda8ef445c4b169e8c6
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
In order to get correct results from sysfs, e.g.:
cat /sys/class/devfreq/dmc/min_freq
cat /sys/class/devfreq/dmc/max_freq
Change-Id: Id5921fdbacd0977c0b5378ccf0de068f0195b557
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Set system_serial_low/high from eFuse ID.
Serial can read from /proc/cpuinfo.
Change-Id: If412fc5a89a5e5092b510452fc5a126fdd374ac2
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
Use a new compatible to match secure interface
when kernel is in no-secure mode.
Change-Id: I3994b2c86bb9e221f102766c2d1a341930628b5d
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
This adds the necessary data for handling secure efuse on the rk3288.
Need to use secure interface to access efuse when kernel is in no-secure
mode.
Change-Id: I1979f23ed8f85c9eb248de276b32adcbb165bd79
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Cat ddr frequency from rockchip_ddrclk_scpi_set_rate prior to
rockchip_ddrclk_scpi_recalc_rate, to optimizing running time and reduce
SCPI APIs usage rate.
Change-Id: Iba31d33a5920816b1cc230f639ea3a9503d451c8
Signed-off-by: Tang Yun ping <typ@rock-chips.com>
1. amend return frequency for scpi_ddr_set_clk_rate.
2. add scpi_ddr_dclk_mode function for rk3368.
Change-Id: I0f3c42d74e34ccb740f2a9e68ef12bba98b7aab7
Signed-off-by: Tang Yun ping <typ@rock-chips.com>
The function doesn't get something from dts, it is more appropriate to
rename of_get_opp_table to rk3399_dmcfreq_init_freq_table.
Change-Id: I8c4994d45ff4d0654d034483e091bbb225a1ea61
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
This adds the necessary data for handling dfi on the rk3368.
Access the dfi via registers provided by GRF (general register
files) module.
Change-Id: I96c2b4dcd34d90731b749ebdbe6922f01559d8e6
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Add a ddrc clock into clk branches, so we can do ddr frequency
scaling on rk3368 platform in future.
Change-Id: Ie7fd2e8d8bdf8b9ff843ca13e848f772adaa109a
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
On rk3368, let a mcu scaling ddr clock via SCPI (System Control and
Power Interface) APIs.
Change-Id: I95342b876caad991e6d1319c5e4ec793365c7981
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
update some features:
1. rename sip smc function name;
2. add serial hw irq and phyical base address parse;
3. use FIQ_DEBUGGER_TRUST_ZONE for armv7 and armv8.
Change-Id: I920899f30cadf1ec8380a2e70f5d1e0e801ec5c2
Signed-off-by: chenjh <chenjh@rock-chips.com>
This adds fixed below errors when compiled rockchip_defconfig without
CONFIG_RK3368_SCPI_PROTOCOL select:
In file included from drivers/clk/rockchip/clk-ddr.c:23:0:
include/soc/rockchip/scpi.h:89:12: warning:
'scpi_sys_set_jtagmux_on_off' defined but not used [-Wunused-function]
error, forbidden warning: scpi.h:89
scripts/Makefile.build:258: recipe for target
'drivers/clk/rockchip/clk-ddr.o' failed
make[3]: *** [drivers/clk/rockchip/clk-ddr.o] Error 1
Change-Id: I5abc184554dcfc3697be82aede8dec27da2fcdd9
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
GPU and DDR share vdd_logic.
DDR DVFS is not ready yet, to ensure DDR could work stably,
vdd_logic(vdd_gpu) should be higher than 1.05V.
This would be optimized after DDR DVFS is ready.
Change-Id: I2749484c7f6f86dde850f0f85d606e1c1ab85c17
Signed-off-by: chenzhen <chenzhen@rock-chips.com>
DDK integrate_guide says
"not to use core_scaling on r5p0-01rel0 and later."
Change-Id: Ibb3eddac75548bb9f6763dc4dc9bad540746191f
Signed-off-by: chenzhen <chenzhen@rock-chips.com>
Some dependences of mali device driver should be initialized first.
Change-Id: I76f1d8b029345801bf0a68266889ec1c5a28b524
Signed-off-by: chenzhen <chenzhen@rock-chips.com>
Some rockchip platforms (e.g. rk3399, rk3328) xHCI controller
support stream for UASP (USB Attached SCSI PROTOCOL), use of
UAS generally provides faster transfers compared to the older
USB Mass Storage Bulk-Only Transport (BOT) drivers.
Change-Id: I67ce5cdb821413d3c4d018be31c892d20d831470
Signed-off-by: William Wu <wulf@rock-chips.com>
