PD#SWPL-5574
Problem:
amixer return error due to ad82584f not exist in W411 platform
Solution:
Disable ad82584f, and remove it from TDM output list
Verify:
Yes
Change-Id: I7fcd5ad31ba57887399c45d67b130e8c3d08e671
Signed-off-by: Blance Tang <guofeng.tang@amlogic.com>
PD#SWPL-4854
Problem:
TXL DTMB has losing lock issue
Solution:
set HHI_DEMOD_CLK_CNTL to 0x301 for TXL
Verify:
verified by t962_p321
Change-Id: I51b61949b5f9c96b64eae7e0054771ce44dbfd5b
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
PD#SWPL-5202
Problem:
cma memory is not released when suspend
Solution:
provide suspend interface to release cma memory
Verify:
verified by t962x2_x301
Change-Id: I1d808a8a6119a2f385961c4c5bded5ab71c9c9d1
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
PD#SWPL-4975
Problem:
some basic saradc registers are only initialized at bl2 stage, the ADC
value is abnormal when bl2 disable saradc init.
Solution:
to re-initialize the basic saradc registers in kernel.
Verify:
test pass on w400 and p212
Change-Id: Ie98e8789fd47cc43cafcb49d9862ccccbe1d9b66
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
PD#OTT-2168
Problem:
media control bar can't displayed because afbc source crop not support
Solution:
add afbc source crop support
Verify:
verify on raven
Change-Id: Ib1f925aeea12ba18d8f976aba8c84f0738c41293
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-5014
Problem:
ppmgr provider error sometimes in long time run under poor signal
Solution:
use light reg for video decoder local reset
Verify:
X301
Change-Id: I1500c9ddfdce76b3e9cb2b24a35cdee765f82d5f
Signed-off-by: Hui Zhang <hui.zhang@amlogic.com>
PD#SWPL-5295
Problem:
add RX delay for 8211f and add led setup interface
Solution:
tuning delay and leds
Verify:
verify on u200 board
Change-Id: I45e855894d570fdd976f90fd8f03151ad52a3683
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
PD#SWPL-5206
Problem:
Setup time in sdio highspeed mode of txlx is
inconsistent with the protocol standard.
Solution:
set co_phase = 2.
Verify:
r321
Change-Id: I3e5a1bca335faea6397513de772d3ee35ea76d40
Signed-off-by: Nan Li <nan.li@amlogic.com>
PD#SWPL-3300
Problem:
local contrast interface for pc tool
Solution:
add driver interface for pc tool
Verify:
tl1
Change-Id: I874ebc6c234f1030fa64a48033580af644550048
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
PD#TV-2272
Problem:
can't get corrent reboot reason in system panic
Solution:
get corrent reboot reason in system panic
Verify:
test pass on T962x2_x301
Change-Id: If0fc95c2807d89542b4ccbc8e3709be20f17b03b
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
PD#SWPL-5017
Problem:
need support dummy lcd for viu1
Solution:
add dummp_panel display mode.
when need viu1 + viu2 -> encl, and show viu2 data,
you can use below setting:
echo dump_panel >/sys/class/display/mode
echo panel >/sys/class/display2/mode
Verify:
x301
Change-Id: I8a7fb52e2272fc8f71d682424ff20dc37f02b726
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-3365
Problem:
system would reboot when carshed by hw resample
Solution:
actrl of toddr is modified to null pointer, so it leads to crash.
fix to pass toddr pointer to function, not fetched by resample module.
Verify:
TL1 socket board
Change-Id: I9227ef2e1ca225e72b0408bc694e6a20d623c8a9
Signed-off-by: huijie.huang <huijie.huang@amlogic.com>
PD#SWPL-4421
Problem:
Tuner crashes easily when fast fine tune
Solution:
Delay afc work to prevent tuner crash
Verify:
verified by x301
Change-Id: I011f7c3f71a30f95a9b7aa371d5fabe71f249051
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-4733
Problem:
The Speaker has noise
Solution:
The binv is not correct for TDM out c,
we will use amixer to set it
Verify:
A113
Change-Id: I7c8af8e00e3c8834533347947630a6944b7e2136
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
PD#SWPL-4737
Problem:
HDMI in and Line in use the same device.
But their input I2S inskew is not same.
Solution:
We need use separate skew setting for different
source.
Verify:
A113
Change-Id: I8e306af06d9c9d614c4032f2030dbedb64a7f6df
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
PD#SWPL-4680
Problem:
unify lcd driver frame_rate change function
Solution:
create a unified api(lcd_clk_change) to management the function
Verify:
verify by t962x2-r311
Change-Id: I1ab378aa2556db0636aabe8c20f3b97845b8184f
Signed-off-by: Shaochan Liu <shaochan.liu@amlogic.com>
PD#SWPL-4225
Problem:
This interface is added to facilitate debugging the voltage-
table in pwm regulator, which can output different percentages
of waveforms in a fixed pwm cycle.
example:
echo 50 100 > sys/class/pwm/pwmchipx/pwmx/relative_duty
output 50% duty pwm
Solution:
add relative_duty interface in pwm sysfs
Verify:
test pass on tl1_X301_v1 tl1_skt_v1
Change-Id: Icd01e681694b81f3790f7cce8c326db02674a48c
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
PD#SWPL-3081
Problem:
1,lack suspend/resume function
2,lack reset pin control
Solution:
1,add suspend/resume function
2, add reset pin control
Verify:
962x2
Signed-off-by: Che Song <che.song@amlogic.com>
Change-Id: I1cb920fdba4ad32048518fdad93e3a5a81039dd9
PD#SWPL-3902
Problem:
If cma page is unevictable, migrate it will cost long time.
Solution:
1. Recalim unevictable cma file cache pages.
2. Using CMA after first water mark not ok.
Verify:
einstern
Change-Id: I0ecbf5dd535cb034430c4ea623891e7a7ae6e4dd
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-4350
Problem:
ramdump is not enabled on g12b/gxl.
Solution:
Add ramdump support on g12b/gxl in bl2.
Verify:
verified on g12b_w400_v1/gxl_p212_v1.
Change-Id: I3520fea366af332ef113809560587eeb4db7b6c5
Signed-off-by: changqing.gao <changqing.gao@amlogic.com>
PD#SH-327
Problem:
uart default min baud rate was set 9600, but PTZ PELCO-D
and PELCO-P need uart driver support 2400 and 4800 baud rate
Solution:
change baud rate minimum value to 2400
Verify:
Local
Change-Id: Iee20ea30a95b89f89a59fab95cecf7d559cbff51
Signed-off-by: Dianzhong Huo <dianzhong.huo@amlogic.com>
PD#SWPL-4839
Problem:
have risk of unmap ge2d dma_buf
Solution:
unmap ge2d dma_buf after ge2d process finished
Verify:
verify by w400
Change-Id: Ia84786b297f8e95cc9efc038300917c98d6b73f6
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-4387
Problem:
system would reboot when carshed by hw resample
Solution:
actrl of toddr is modified to null pointer, so it leads to crash.
fix to pass toddr pointer to function, not fetched by resample module.
Verify:
x301
Change-Id: I91c30260ee825d843e8ed17304031382b42ac119
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#SWPL-4233
Problem:
3D framepacking mode display black screen
Solution:
Add vinfo 3d flag and hdmitx update
when work 3d mode
Verify:
U212
Change-Id: Ia2b7b25c9ed401dbec2c487ea2a5c6cc1e0d8b8d
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
PD#SWPL-4501
Problem:
All platforms but m8b use "gpio_periphs" as gpio pinctrl function, that
breaks consistency.
Solution:
rename m8b pinctrl function "gpio" to "gpio_periphs" to make it
consistent with code and other platform.
ref:
https://patchwork.kernel.org/patch/10720219/
Verify:
m200
Change-Id: I940d1e30882cc8b042c02022ed3435a659aa3921
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
PD#SWPL-4355
Problem:
ge2d: Adjust scaler para when input is nv21 and output is rgb
Solution:
merge patch 'Adjust scaler para when input is nv21 and output is rgb'
from amlogic-3.14-dev(PD#15652)
Verify:
verified on u200
Change-Id: I199b07d683a01175ec17d4d34be6febd3083920c
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-4355
Problem:
ge2d: play video display mess when used ionvideo
Solution:
merge patch 'play video display mess when used ionvideo'
from amlogic-3.14-dev(PD#155143)
Verify:
verified on u200
Change-Id: Iaf34fe1d1c7e7637015dadaaf43e201cf28089b7
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-4351
Problem:
Our cpu has 4 watch point on each cpu. It can be used for debug
purpose. But currently there is no driver support it.
Solution:
Bring up driver for it.
Verify:
p212
Change-Id: Ifbcb7f9b77e10fcb03b3c1a5e18f06b1a56ec2f0
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#TV-470
Problem:
t950 ddr bandwidth usage is error
Solution:
t950/805x ddr is 16bit, correct the param to get right usage
Verify:
t950
Change-Id: Ice876f82e5c33e778b3ac9f593e0c163d57d7f3f
Signed-off-by: wenbiao zhang <wenbiao.zhang@amlogic.com>
PD#TV-2088
Problem:
wifi can not power in driver
Solution:
export set_usb_wifi_power
Verify:
franklin
Change-Id: Ic6fb75133533c395cd96e9d82f14427cf40cee96
Signed-off-by: Rongjun Chen <rongjun.chen@amlogic.com>
PD#SWPL-4272
Problem:
g12b_a311d_w400_buildroot.dts do not include add ir cut control GPIO
Solution:
add ir cut control GPIO to g12b_a311d_w400_buildroot.dts
Verify:
g12b_a311d_w400_buildroot
Change-Id: I771ea08ad6ab189060079b820a471e059b5eb72a
Signed-off-by: yu.zhang <yu.zhang@amlogic.com>
PD#SWPL-3418
Problem:
[Einstein]when AC off/on,enter live TV ,
TV display blank screen and no signal about 5S
Solution:
use post-eq to track(0x912=0x50)
Verify:
verified by t962x_r311
Change-Id: I924c55a8f1c92328e4371cb730e1b03bd720457f
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>
PD#SWPL-4150
Problem:
When switch to the toolchain shipped with android P, multipile
"-Werror=maybe-uninitialized" error occurs, and the code fail
to be compiled
Solution:
Initialize variables if necessary
Verify:
Locally on Ampere
Change-Id: I280de648914565656831e211539bf41a7dee2b4a
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
