PD#SWPL-5664
Problem:
for netflix 23.97fps non-tunnle playback 3:2 patten broken so many times
Solution:
reuse initial phase that Tim use in amazon
Verify:
verify by u212
Change-Id: I5d988e1c3a3dbf1bb728f55a921e8b8fb6990985
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-5664
Problem:
pcr not paused when netflix video non-tunnel mode pause
Solution:
do not compensation when diff between omxpts and pcr too large
Because when paused, continous compensation will lead diff
beween omxpts and pcr will alway inside pcr adjust threshold,
and pcr not set again, then pcr will increase
Verify:
verify by nts
Change-Id: Ib2acea35758d161d1e9db53dd6ff369ba7973351
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-5664
Problem:
pcr is probably adjust when test AL1 eyepatch test case
Solution:
the time is not accurate when check pcr and omx_pts differ, because
omx_pts is used the value that be set, but pcr is current. Here add
compensation for omx_pts
Verify:
verify by nts
Change-Id: I3e0f6f006fd79cf7cac4148fd18da72111a333c7
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-7656
Problem:
crash when there is cpu boot fail in hmp
Solution:
fix crash when there is cpu boot fail in hmp
Verify:
W400
Change-Id: I0153975593adb0bfcbc3c3bd6543f0fb2e6bf2e0
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
PD#SWPL-7181
Problem:
switch to high-speed from hs200 failed for resume process.
Solution:
set tx_delay as 0 for legacy mode.
clear cfg_cmd_setup
Verify:
verify by TL1
Change-Id: I5dbb1bbc391da864464bf137837a2b0f54ccda42
Signed-off-by: Long Yu <long.yu@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-7765
Problem:
g12b revb efuse not correct
Solution:
set tx_amp with chipid to work around
Verify:
verify on g12b skt board
Change-Id: Id1babce231d866293e4de52685834834a4b65227
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
PD#SWPL-6937
Problem:
1.get lefttime error by 'cat sys/class/watchdog/watchdog0/timeleft' cmd.
2.if DTS is configured to feed watchdog by Android, the system will
restart automatically after wake up.
Solution:
1.modify the code to get time.
2.when the system wakes up, first judge whether the watchdog runs,
and then decide whether to start the watchdog.
Verify:
test pass on u200
Change-Id: If64888ffdd5651e8cfcace5ea0d0da31641bb397
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
PD#SWPL-5475
Problem:
need to add interface of HDR Prime SL driver
Solution:
add interface of HDR Prime SL driver
Verify:
U212
Change-Id: If0e62b74ccbaa4ede490e7a9896d9f5915480d6f
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#OTT-2524
Problem:
enable sdr2hdr function, uboot logo have color change
Solution:
match uboot sdr2hdr function
Verify:
verify on G12A
Change-Id: I160cd6141d09a385d299ca96a89eb1ebf09c86e8
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#SWPL-6969
Problem:
For some historical reason, aml-uart is configured as the earlycon
name in uboot, which is not recognized by 4.9 kernel
Solution:
support aml-uart as the name for earlycon
Verify:
Ampere
Change-Id: I01427f2d512c0bf1972dd545dc71570919c5bc07
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#OTT-3244
Problem:
When vd layer state is on_pending, calling enable videolayer
function will overwrite the state. Then it will not enable video
layer really.
Solution:
Add the judgement to check if the state is on_pending.
Verify:
verified on W400
Change-Id: I0513a6610fdb108bec05858c7f6c7976be5e7edb
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-7302
Problem:
sm1 green screen when play videos
Solution:
add chip support
Verify:
s905D3
Change-Id: I50c0a9f889d72b65157a973bfe1df8dce10db64a
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
PD#SWPL-5430
Problem:
new function lane 6 and lane 8
Solution:
support max 16 channel playback
Verify:
sm1_ac200, verify pass
Change-Id: I3af42a0b68bca8804afa042ad4a506a379b9bf86
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm.c
PD#SWPL-5495
Problem:
There is some improvement code on RSR
project, we need to merge them back to
trunk.
Solution:
Merge the code from rsr branch
Verify:
A113
Change-Id: I0ba11c8ff412db659ff2f10bfc00d63c49f84bb5
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm.c
PD#SWPL-3365
Problem:
not resample for audio in, so output in wrong sample rate
Solution:
1. enable resample in dts
2. fix to check whether resample is needed
Verify:
x301
Change-Id: I99238cc21a00ab53df6a1f8ab1703bc9ab48cbaa
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/ddr_mngr.c
sound/soc/amlogic/auge/resample.c
sound/soc/amlogic/auge/spdif.c
PD#SWPL-2645
Problem:
play ddp source, then play pcm source, no sound
Solution:
1. fix same source control and channel map issue
2. i2s 8ch, spdif 2ch, channels are not mapped, make spdif 8 channel mask
3. when same source used, keep mpll use same mpll
Verify:
x301
Change-Id: I2fe4bbcbcbfff0a1c1a6cebf61d1da5aba9b7a9d
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/tl1_t962x2_t309.dts
arch/arm/boot/dts/amlogic/tl1_t962x2_x301.dts
arch/arm64/boot/dts/amlogic/tm2_t962e2_ab311.dts
arch/arm64/boot/dts/amlogic/tm2_t962x3_ab301.dts
sound/soc/amlogic/auge/ddr_mngr.c
sound/soc/amlogic/auge/sharebuffer.c
sound/soc/amlogic/auge/spdif_hw.c
sound/soc/amlogic/auge/spdif_hw.h
PD#SWPL-5837
Problem:
dtv is out of avsync when dolby ms12 certificate
Solution:
when the audio is played, recalculate the apts to sync
pcrsrc when pcrmaster.
Verify:
X301
Change-Id: I199383aa1c0de1b4f0ec646d9d066910b3bb2b42
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
PD#TV-4638
Problem:
Speaker output high frequency howling
after change from pattern 615 to pattern 1 on chroma22294.
The hw resampler keeps sending noise if it has no input.
Solution:
Enable the hw resample pause thd by default.
Verify:
TL1 X301.
Change-Id: Ib6f0924025e155eaa8ba0e3681b307f7ff56b449
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#TV-4638
Problem:
Speaker output high frequency howling
after change from pattern 615 to pattern 1 on chroma22294.
The hw resampler keeps sending noise if it has no input.
Solution:
Enable the hw resample pause thd by default.
Verify:
TL1 X301.
Change-Id: I076d1b80c6482661fdc3fd5808f1cc231666d07e
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-7039
Problem:
Kernel Panic when resample A is disabled
Solution:
When resample is disabled，don't init resample
Verify:
Verified on T962e2_ab311
Change-Id: Id9552ffc6be40f133b828dbded4ad3f15d177ab0
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#TV-3452
Problem:
Toddr stuck after a long time playback.
Solution:
For debug usage.
Verify:
No need.
Change-Id: Ibf4446148f5e028040d7d6527c7695f23f964f7c
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#SWPL-6118
Problem:
No resample will cause mismatch between
input and output if they are not at same
samplerate.
Solution:
Add resample for hdmirx case
Verify:
Local tested.
Change-Id: I298e401578bf49484d6b75fd736d2a74c38508e4
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/ddr_mngr.c
sound/soc/amlogic/auge/ddr_mngr.h
PD#SWPL-5518
Problem:
In DTV passthrough, the output clk drifts from input
Solution:
add clk fine tuning interface
Verify:
verify by X301
Change-Id: I969d3eb865fb1aba90f155965548454cc3040c99
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm.c
