Changes in 4.4.110
x86/boot: Add early cmdline parsing for options with arguments
KAISER: Kernel Address Isolation
kaiser: merged update
kaiser: do not set _PAGE_NX on pgd_none
kaiser: stack map PAGE_SIZE at THREAD_SIZE-PAGE_SIZE
kaiser: fix build and FIXME in alloc_ldt_struct()
kaiser: KAISER depends on SMP
kaiser: fix regs to do_nmi() ifndef CONFIG_KAISER
kaiser: fix perf crashes
kaiser: ENOMEM if kaiser_pagetable_walk() NULL
kaiser: tidied up asm/kaiser.h somewhat
kaiser: tidied up kaiser_add/remove_mapping slightly
kaiser: kaiser_remove_mapping() move along the pgd
kaiser: cleanups while trying for gold link
kaiser: name that 0x1000 KAISER_SHADOW_PGD_OFFSET
kaiser: delete KAISER_REAL_SWITCH option
kaiser: vmstat show NR_KAISERTABLE as nr_overhead
kaiser: enhanced by kernel and user PCIDs
kaiser: load_new_mm_cr3() let SWITCH_USER_CR3 flush user
kaiser: PCID 0 for kernel and 128 for user
kaiser: x86_cr3_pcid_noflush and x86_cr3_pcid_user
kaiser: paranoid_entry pass cr3 need to paranoid_exit
kaiser: _pgd_alloc() without __GFP_REPEAT to avoid stalls
kaiser: fix unlikely error in alloc_ldt_struct()
kaiser: add "nokaiser" boot option, using ALTERNATIVE
x86/kaiser: Rename and simplify X86_FEATURE_KAISER handling
x86/kaiser: Check boottime cmdline params
kaiser: use ALTERNATIVE instead of x86_cr3_pcid_noflush
kaiser: drop is_atomic arg to kaiser_pagetable_walk()
kaiser: asm/tlbflush.h handle noPGE at lower level
kaiser: kaiser_flush_tlb_on_return_to_user() check PCID
x86/paravirt: Dont patch flush_tlb_single
x86/kaiser: Reenable PARAVIRT
kaiser: disabled on Xen PV
x86/kaiser: Move feature detection up
KPTI: Rename to PAGE_TABLE_ISOLATION
KPTI: Report when enabled
x86, vdso, pvclock: Simplify and speed up the vdso pvclock reader
x86/vdso: Get pvclock data from the vvar VMA instead of the fixmap
x86/kasan: Clear kasan_zero_page after TLB flush
kaiser: Set _PAGE_NX only if supported
Linux 4.4.110
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The kaiser update made an interesting choice, never to free any shadow
page tables. Contention on global spinlock was worrying, particularly
with it held across page table scans when freeing. Something had to be
done: I was going to add refcounting; but simply never to free them is
an appealing choice, minimizing contention without complicating the code
(the more a page table is found already, the less the spinlock is used).
But leaking pages in this way is also a worry: can we get away with it?
At the very least, we need a count to show how bad it actually gets:
in principle, one might end up wasting about 1/256 of memory that way
(1/512 for when direct-mapped pages have to be user-mapped, plus 1/512
for when they are user-mapped from the vmalloc area on another occasion
(but we don't have vmalloc'ed stacks, so only large ldts are vmalloc'ed).
Add per-cpu stat NR_KAISERTABLE: including 256 at startup for the
shared pgd entries, and 1 for each intermediate page table added
thereafter for user-mapping - but leave out the 1 per mm, for its
shadow pgd, because that distracts from the monotonic increase.
Shown in /proc/vmstat as nr_overhead (0 if kaiser not enabled).
In practice, it doesn't look so bad so far: more like 1/12000 after
nine hours of gtests below; and movable pageblock segregation should
tend to cluster the kaiser tables into a subset of the address space
(if not, they will be bad for compaction too). But production may
tell a different story: keep an eye on this number, and bring back
lighter freeing if it gets out of control (maybe a shrinker).
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While trying to get our gold link to work, four cleanups:
matched the gdt_page declaration to its definition;
in fiddling unsuccessfully with PERCPU_INPUT(), lined up backslashes;
lined up the backslashes according to convention in percpu-defs.h;
deleted the unused irq_stack_pointer addition to irq_stack_union.
Sad to report that aligning backslashes does not appear to help gold
align to 8192: but while these did not help, they are worth keeping.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kaiser only needs to map one page of the stack; and
kernel/fork.c did not build on powerpc (no __PAGE_KERNEL).
It's all cleaner if linux/kaiser.h provides kaiser_map_thread_stack()
and kaiser_unmap_thread_stack() wrappers around asm/kaiser.h's
kaiser_add_mapping() and kaiser_remove_mapping(). And use
linux/kaiser.h in init/main.c to avoid the #ifdefs there.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.4.109
ACPI: APEI / ERST: Fix missing error handling in erst_reader()
crypto: mcryptd - protect the per-CPU queue with a lock
mfd: cros ec: spi: Don't send first message too soon
mfd: twl4030-audio: Fix sibling-node lookup
mfd: twl6040: Fix child-node lookup
ALSA: rawmidi: Avoid racy info ioctl via ctl device
ALSA: usb-audio: Fix the missing ctl name suffix at parsing SU
PCI / PM: Force devices to D0 in pci_pm_thaw_noirq()
parisc: Hide Diva-built-in serial aux and graphics card
spi: xilinx: Detect stall with Unknown commands
KVM: X86: Fix load RFLAGS w/o the fixed bit
kvm: x86: fix RSM when PCID is non-zero
powerpc/perf: Dereference BHRB entries safely
net: mvneta: clear interface link status on port disable
tracing: Remove extra zeroing out of the ring buffer page
tracing: Fix possible double free on failure of allocating trace buffer
tracing: Fix crash when it fails to alloc ring buffer
ring-buffer: Mask out the info bits when returning buffer page length
iw_cxgb4: Only validate the MSN for successful completions
ASoC: fsl_ssi: AC'97 ops need regmap, clock and cleaning up on failure
ASoC: twl4030: fix child-node lookup
ALSA: hda: Drop useless WARN_ON()
ALSA: hda - fix headset mic detection issue on a Dell machine
x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly()
x86/mm: Remove flush_tlb() and flush_tlb_current_task()
x86/mm: Make flush_tlb_mm_range() more predictable
x86/mm: Reimplement flush_tlb_page() using flush_tlb_mm_range()
x86/mm: Remove the UP asm/tlbflush.h code, always use the (formerly) SMP code
x86/mm: Disable PCID on 32-bit kernels
x86/mm: Add the 'nopcid' boot option to turn off PCID
x86/mm: Enable CR4.PCIDE on supported systems
x86/mm/64: Fix reboot interaction with CR4.PCIDE
kbuild: add '-fno-stack-check' to kernel build options
ipv4: igmp: guard against silly MTU values
ipv6: mcast: better catch silly mtu values
net: igmp: Use correct source address on IGMPv3 reports
netlink: Add netns check on taps
net: qmi_wwan: add Sierra EM7565 1199:9091
net: reevalulate autoflowlabel setting after sysctl setting
tcp md5sig: Use skb's saddr when replying to an incoming segment
tg3: Fix rx hang on MTU change with 5717/5719
net: ipv4: fix for a race condition in raw_sendmsg
net: mvmdio: disable/unprepare clocks in EPROBE_DEFER case
sctp: Replace use of sockets_allocated with specified macro.
ipv4: Fix use-after-free when flushing FIB tables
net: bridge: fix early call to br_stp_change_bridge_id and plug newlink leaks
net: Fix double free and memory corruption in get_net_ns_by_id()
net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround
sock: free skb in skb_complete_tx_timestamp on error
usbip: fix usbip bind writing random string after command in match_busid
usbip: stub: stop printing kernel pointer addresses in messages
usbip: vhci: stop printing kernel pointer addresses in messages
USB: serial: ftdi_sio: add id for Airbus DS P8GR
USB: serial: qcserial: add Sierra Wireless EM7565
USB: serial: option: add support for Telit ME910 PID 0x1101
USB: serial: option: adding support for YUGA CLM920-NC5
usb: Add device quirk for Logitech HD Pro Webcam C925e
usb: add RESET_RESUME for ELSA MicroLink 56K
USB: Fix off by one in type-specific length check of BOS SSP capability
usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201
nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()
x86/smpboot: Remove stale TLB flush invocations
n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD)
mm/vmstat: Make NR_TLB_REMOTE_FLUSH_RECEIVED available even on UP
Linux 4.4.109
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 513674b5a2 ]
sysctl.ip6.auto_flowlabels is default 1. In our hosts, we set it to 2.
If sockopt doesn't set autoflowlabel, outcome packets from the hosts are
supposed to not include flowlabel. This is true for normal packet, but
not for reset packet.
The reason is ipv6_pinfo.autoflowlabel is set in sock creation. Later if
we change sysctl.ip6.auto_flowlabels, the ipv6_pinfo.autoflowlabel isn't
changed, so the sock will keep the old behavior in terms of auto
flowlabel. Reset packet is suffering from this problem, because reset
packet is sent from a special control socket, which is created at boot
time. Since sysctl.ipv6.auto_flowlabels is 1 by default, the control
socket will always have its ipv6_pinfo.autoflowlabel set, even after
user set sysctl.ipv6.auto_flowlabels to 1, so reset packset will always
have flowlabel. Normal sock created before sysctl setting suffers from
the same issue. We can't even turn off autoflowlabel unless we kill all
socks in the hosts.
To fix this, if IPV6_AUTOFLOWLABEL sockopt is used, we use the
autoflowlabel setting from user, otherwise we always call
ip6_default_np_autolabel() which has the new settings of sysctl.
Note, this changes behavior a little bit. Before commit 42240901f7
(ipv6: Implement different admin modes for automatic flow labels), the
autoflowlabel behavior of a sock isn't sticky, eg, if sysctl changes,
existing connection will change autoflowlabel behavior. After that
commit, autoflowlabel behavior is sticky in the whole life of the sock.
With this patch, the behavior isn't sticky again.
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Tom Herbert <tom@quantonium.net>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b5476022bb ]
IPv4 stack reacts to changes to small MTU, by disabling itself under
RTNL.
But there is a window where threads not using RTNL can see a wrong
device mtu. This can lead to surprises, in igmp code where it is
assumed the mtu is suitable.
Fix this by reading device mtu once and checking IPv4 minimal MTU.
This patch adds missing IPV4_MIN_MTU define, to not abuse
ETH_MIN_MTU anymore.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9abffc6f2e upstream.
mcryptd_enqueue_request() grabs the per-CPU queue struct and protects
access to it with disabled preemption. Then it schedules a worker on the
same CPU. The worker in mcryptd_queue_worker() guards access to the same
per-CPU variable with disabled preemption.
If we take CPU-hotplug into account then it is possible that between
queue_work_on() and the actual invocation of the worker the CPU goes
down and the worker will be scheduled on _another_ CPU. And here the
preempt_disable() protection does not work anymore. The easiest thing is
to add a spin_lock() to guard access to the list.
Another detail: mcryptd_queue_worker() is not processing more than
MCRYPTD_BATCH invocation in a row. If there are still items left, then
it will invoke queue_work() to proceed with more later. *I* would
suggest to simply drop that check because it does not use a system
workqueue and the workqueue is already marked as "CPU_INTENSIVE". And if
preemption is required then the scheduler should do it.
However if queue_work() is used then the work item is marked as CPU
unbound. That means it will try to run on the local CPU but it may run
on another CPU as well. Especially with CONFIG_DEBUG_WQ_FORCE_RR_CPU=y.
Again, the preempt_disable() won't work here but lock which was
introduced will help.
In order to keep work-item on the local CPU (and avoid RR) I changed it
to queue_work_on().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.4.108
arm64: Initialise high_memory global variable earlier
cxl: Check if vphb exists before iterating over AFU devices
x86/mm: Add INVPCID helpers
x86/mm: Fix INVPCID asm constraint
x86/mm: Add a 'noinvpcid' boot option to turn off INVPCID
x86/mm: If INVPCID is available, use it to flush global mappings
mm/rmap: batched invalidations should use existing api
mm/mmu_context, sched/core: Fix mmu_context.h assumption
sched/core: Add switch_mm_irqs_off() and use it in the scheduler
x86/mm: Build arch/x86/mm/tlb.c even on !SMP
x86/mm, sched/core: Uninline switch_mm()
x86/mm, sched/core: Turn off IRQs in switch_mm()
ARM: Hide finish_arch_post_lock_switch() from modules
sched/core: Idle_task_exit() shouldn't use switch_mm_irqs_off()
x86/irq: Do not substract irq_tlb_count from irq_call_count
ALSA: hda - add support for docking station for HP 820 G2
ALSA: hda - add support for docking station for HP 840 G3
arm: kprobes: Fix the return address of multiple kretprobes
arm: kprobes: Align stack to 8-bytes in test code
cpuidle: Validate cpu_dev in cpuidle_add_sysfs()
r8152: fix the list rx_done may be used without initialization
crypto: deadlock between crypto_alg_sem/rtnl_mutex/genl_mutex
sch_dsmark: fix invalid skb_cow() usage
bna: integer overflow bug in debugfs
net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4
usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed
usb: gadget: udc: remove pointer dereference after free
netfilter: nfnl_cthelper: fix runtime expectation policy updates
netfilter: nfnl_cthelper: Fix memory leak
inet: frag: release spinlock before calling icmp_send()
pinctrl: st: add irq_request/release_resources callbacks
scsi: lpfc: Fix PT2PT PRLI reject
KVM: x86: correct async page present tracepoint
KVM: VMX: Fix enable VPID conditions
ARM: dts: ti: fix PCI bus dtc warnings
hwmon: (asus_atk0110) fix uninitialized data access
HID: xinmo: fix for out of range for THT 2P arcade controller.
r8152: prevent the driver from transmitting packets with carrier off
s390/qeth: no ETH header for outbound AF_IUCV
bna: avoid writing uninitialized data into hw registers
net: Do not allow negative values for busy_read and busy_poll sysctl interfaces
i40e: Do not enable NAPI on q_vectors that have no rings
RDMA/iser: Fix possible mr leak on device removal event
irda: vlsi_ir: fix check for DMA mapping errors
netfilter: nfnl_cthelper: fix a race when walk the nf_ct_helper_hash table
netfilter: nf_nat_snmp: Fix panic when snmp_trap_helper fails to register
ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend
KVM: pci-assign: do not map smm memory slot pages in vt-d page tables
isdn: kcapi: avoid uninitialized data
xhci: plat: Register shutdown for xhci_plat
netfilter: nfnetlink_queue: fix secctx memory leak
ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory
cpuidle: powernv: Pass correct drv->cpumask for registration
bnxt_en: Fix NULL pointer dereference in reopen failure path
backlight: pwm_bl: Fix overflow condition
crypto: crypto4xx - increase context and scatter ring buffer elements
rtc: pl031: make interrupt optional
net: phy: at803x: Change error to EINVAL for invalid MAC
PCI: Avoid bus reset if bridge itself is broken
scsi: cxgb4i: fix Tx skb leak
scsi: mpt3sas: Fix IO error occurs on pulling out a drive from RAID1 volume created on two SATA drive
PCI: Create SR-IOV virtfn/physfn links before attaching driver
igb: check memory allocation failure
ixgbe: fix use of uninitialized padding
PCI/AER: Report non-fatal errors only to the affected endpoint
scsi: lpfc: Fix secure firmware updates
scsi: lpfc: PLOGI failures during NPIV testing
fm10k: ensure we process SM mbx when processing VF mbx
tcp: fix under-evaluated ssthresh in TCP Vegas
rtc: set the alarm to the next expiring timer
cpuidle: fix broadcast control when broadcast can not be entered
thermal: hisilicon: Handle return value of clk_prepare_enable
MIPS: math-emu: Fix final emulation phase for certain instructions
Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature"
ALSA: hda - Clear the leftover component assignment at snd_hdac_i915_exit()
ALSA: hda - Degrade i915 binding failure message
ALSA: hda - Fix yet another i915 pointer leftover in error path
alpha: fix build failures
Linux 4.4.108
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Changes in 4.4.107
crypto: hmac - require that the underlying hash algorithm is unkeyed
crypto: salsa20 - fix blkcipher_walk API usage
autofs: fix careless error in recent commit
tracing: Allocate mask_str buffer dynamically
USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID
USB: core: prevent malicious bNumInterfaces overflow
usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer
ceph: drop negative child dentries before try pruning inode's alias
Bluetooth: btusb: driver to enable the usb-wakeup feature
xhci: Don't add a virt_dev to the devs array before it's fully allocated
sched/rt: Do not pull from current CPU if only one CPU to pull
dmaengine: dmatest: move callback wait queue to thread context
ext4: fix fdatasync(2) after fallocate(2) operation
ext4: fix crash when a directory's i_size is too small
KEYS: add missing permission check for request_key() destination
mac80211: Fix addition of mesh configuration element
usb: phy: isp1301: Add OF device ID table
md-cluster: free md_cluster_info if node leave cluster
userfaultfd: shmem: __do_fault requires VM_FAULT_NOPAGE
userfaultfd: selftest: vm: allow to build in vm/ directory
net: initialize msg.msg_flags in recvfrom
net: bcmgenet: correct the RBUF_OVFL_CNT and RBUF_ERR_CNT MIB values
net: bcmgenet: correct MIB access of UniMAC RUNT counters
net: bcmgenet: reserved phy revisions must be checked first
net: bcmgenet: power down internal phy if open or resume fails
net: bcmgenet: Power up the internal PHY before probing the MII
NFSD: fix nfsd_minorversion(.., NFSD_AVAIL)
NFSD: fix nfsd_reset_versions for NFSv4.
Input: i8042 - add TUXEDO BU1406 (N24_25BU) to the nomux list
drm/omap: fix dmabuf mmap for dma_alloc'ed buffers
netfilter: bridge: honor frag_max_size when refragmenting
writeback: fix memory leak in wb_queue_work()
net: wimax/i2400m: fix NULL-deref at probe
dmaengine: Fix array index out of bounds warning in __get_unmap_pool()
net: Resend IGMP memberships upon peer notification.
mlxsw: reg: Fix SPVM max record count
mlxsw: reg: Fix SPVMLR max record count
intel_th: pci: Add Gemini Lake support
openrisc: fix issue handling 8 byte get_user calls
scsi: hpsa: update check for logical volume status
scsi: hpsa: limit outstanding rescans
fjes: Fix wrong netdevice feature flags
drm/radeon/si: add dpm quirk for Oland
sched/deadline: Make sure the replenishment timer fires in the next period
sched/deadline: Throttle a constrained deadline task activated after the deadline
sched/deadline: Use deadline instead of period when calculating overflow
mmc: mediatek: Fixed bug where clock frequency could be set wrong
drm/radeon: reinstate oland workaround for sclk
afs: Fix missing put_page()
afs: Populate group ID from vnode status
afs: Adjust mode bits processing
afs: Flush outstanding writes when an fd is closed
afs: Migrate vlocation fields to 64-bit
afs: Prevent callback expiry timer overflow
afs: Fix the maths in afs_fs_store_data()
afs: Populate and use client modification time
afs: Fix page leak in afs_write_begin()
afs: Fix afs_kill_pages()
net/mlx4_core: Avoid delays during VF driver device shutdown
perf symbols: Fix symbols__fixup_end heuristic for corner cases
efi/esrt: Cleanup bad memory map log messages
NFSv4.1 respect server's max size in CREATE_SESSION
btrfs: add missing memset while reading compressed inline extents
target: Use system workqueue for ALUA transitions
target: fix ALUA transition timeout handling
target: fix race during implicit transition work flushes
sfc: don't warn on successful change of MAC
fbdev: controlfb: Add missing modes to fix out of bounds access
video: udlfb: Fix read EDID timeout
video: fbdev: au1200fb: Release some resources if a memory allocation fails
video: fbdev: au1200fb: Return an error code if a memory allocation fails
rtc: pcf8563: fix output clock rate
dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type
PCI/PME: Handle invalid data when reading Root Status
powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo
netfilter: ipvs: Fix inappropriate output of procfs
powerpc/opal: Fix EBUSY bug in acquiring tokens
powerpc/ipic: Fix status get and status clear
target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd()
iscsi-target: fix memory leak in lio_target_tiqn_addtpg()
target:fix condition return in core_pr_dump_initiator_port()
target/file: Do not return error for UNMAP if length is zero
arm-ccn: perf: Prevent module unload while PMU is in use
crypto: tcrypt - fix buffer lengths in test_aead_speed()
mm: Handle 0 flags in _calc_vm_trans() macro
clk: mediatek: add the option for determining PLL source clock
clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU
clk: tegra: Fix cclk_lp divisor register
ppp: Destroy the mutex when cleanup
thermal/drivers/step_wise: Fix temperature regulation misbehavior
GFS2: Take inode off order_write list when setting jdata flag
bcache: explicitly destroy mutex while exiting
bcache: fix wrong cache_misses statistics
l2tp: cleanup l2tp_tunnel_delete calls
xfs: fix log block underflow during recovery cycle verification
xfs: fix incorrect extent state in xfs_bmap_add_extent_unwritten_real
PCI: Detach driver before procfs & sysfs teardown on device remove
scsi: hpsa: cleanup sas_phy structures in sysfs when unloading
scsi: hpsa: destroy sas transport properties before scsi_host
powerpc/perf/hv-24x7: Fix incorrect comparison in memord
tty fix oops when rmmod 8250
usb: musb: da8xx: fix babble condition handling
pinctrl: adi2: Fix Kconfig build problem
raid5: Set R5_Expanded on parity devices as well as data.
scsi: scsi_devinfo: Add REPORTLUN2 to EMC SYMMETRIX blacklist entry
vt6655: Fix a possible sleep-in-atomic bug in vt6655_suspend
scsi: sd: change manage_start_stop to bool in sysfs interface
scsi: sd: change allow_restart to bool in sysfs interface
scsi: bfa: integer overflow in debugfs
udf: Avoid overflow when session starts at large offset
macvlan: Only deliver one copy of the frame to the macvlan interface
RDMA/cma: Avoid triggering undefined behavior
IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop
ath9k: fix tx99 potential info leak
Linux 4.4.107
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 592e254502 ]
_calc_vm_trans() does not handle the situation when some of the passed
flags are 0 (which can happen if these VM flags do not make sense for
the architecture). Improve the _calc_vm_trans() macro to return 0 in
such situation. Since all passed flags are constant, this does not add
any runtime overhead.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d7175373f2 ]
The implicit transition time tells initiators the min time
to wait before timing out a transition. We currently schedule
the transition to occur in tg_pt_gp_implicit_trans_secs
seconds so there is no room for delays. If
core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata
needs to write out info to a remote file, then the initiator can
easily time out the operation.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4cbe4dac82 ]
Some Hypervisors detach VFs from VMs by instantly causing an FLR event
to be generated for a VF.
In the mlx4 case, this will cause that VF's comm channel to be disabled
before the VM has an opportunity to invoke the VF device's "shutdown"
method.
For such Hypervisors, there is a race condition between the VF's
shutdown method and its internal-error detection/reset thread.
The internal-error detection/reset thread (which runs every 5 seconds) also
detects a disabled comm channel. If the internal-error detection/reset
flow wins the race, we still get delays (while that flow tries repeatedly
to detect comm-channel recovery).
The cited commit fixed the command timeout problem when the
internal-error detection/reset flow loses the race.
This commit avoids the unneeded delays when the internal-error
detection/reset flow wins.
Fixes: d585df1c5c ("net/mlx4_core: Avoid command timeouts during VF driver device shutdown")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reported-by: Simon Xiao <sixiao@microsoft.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af3ff8045b upstream.
Because the HMAC template didn't check that its underlying hash
algorithm is unkeyed, trying to use "hmac(hmac(sha3-512-generic))"
through AF_ALG or through KEYCTL_DH_COMPUTE resulted in the inner HMAC
being used without having been keyed, resulting in sha3_update() being
called without sha3_init(), causing a stack buffer overflow.
This is a very old bug, but it seems to have only started causing real
problems when SHA-3 support was added (requires CONFIG_CRYPTO_SHA3)
because the innermost hash's state is ->import()ed from a zeroed buffer,
and it just so happens that other hash algorithms are fine with that,
but SHA-3 is not. However, there could be arch or hardware-dependent
hash algorithms also affected; I couldn't test everything.
Fix the bug by introducing a function crypto_shash_alg_has_setkey()
which tests whether a shash algorithm is keyed. Then update the HMAC
template to require that its underlying hash algorithm is unkeyed.
Here is a reproducer:
#include <linux/if_alg.h>
#include <sys/socket.h>
int main()
{
int algfd;
struct sockaddr_alg addr = {
.salg_type = "hash",
.salg_name = "hmac(hmac(sha3-512-generic))",
};
char key[4096] = { 0 };
algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(algfd, (const struct sockaddr *)&addr, sizeof(addr));
setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key));
}
Here was the KASAN report from syzbot:
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:341 [inline]
BUG: KASAN: stack-out-of-bounds in sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161
Write of size 4096 at addr ffff8801cca07c40 by task syzkaller076574/3044
CPU: 1 PID: 3044 Comm: syzkaller076574 Not tainted 4.14.0-mm1+ #25
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x25b/0x340 mm/kasan/report.c:409
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x137/0x190 mm/kasan/kasan.c:267
memcpy+0x37/0x50 mm/kasan/kasan.c:303
memcpy include/linux/string.h:341 [inline]
sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161
crypto_shash_update+0xcb/0x220 crypto/shash.c:109
shash_finup_unaligned+0x2a/0x60 crypto/shash.c:151
crypto_shash_finup+0xc4/0x120 crypto/shash.c:165
hmac_finup+0x182/0x330 crypto/hmac.c:152
crypto_shash_finup+0xc4/0x120 crypto/shash.c:165
shash_digest_unaligned+0x9e/0xd0 crypto/shash.c:172
crypto_shash_digest+0xc4/0x120 crypto/shash.c:186
hmac_setkey+0x36a/0x690 crypto/hmac.c:66
crypto_shash_setkey+0xad/0x190 crypto/shash.c:64
shash_async_setkey+0x47/0x60 crypto/shash.c:207
crypto_ahash_setkey+0xaf/0x180 crypto/ahash.c:200
hash_setkey+0x40/0x90 crypto/algif_hash.c:446
alg_setkey crypto/af_alg.c:221 [inline]
alg_setsockopt+0x2a1/0x350 crypto/af_alg.c:254
SYSC_setsockopt net/socket.c:1851 [inline]
SyS_setsockopt+0x189/0x360 net/socket.c:1830
entry_SYSCALL_64_fastpath+0x1f/0x96
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kcov provides code coverage collection for coverage-guided fuzzing
(randomized testing). Coverage-guided fuzzing is a testing technique
that uses coverage feedback to determine new interesting inputs to a
system. A notable user-space example is AFL
(http://lcamtuf.coredump.cx/afl/). However, this technique is not
widely used for kernel testing due to missing compiler and kernel
support.
kcov does not aim to collect as much coverage as possible. It aims to
collect more or less stable coverage that is function of syscall inputs.
To achieve this goal it does not collect coverage in soft/hard
interrupts and instrumentation of some inherently non-deterministic or
non-interesting parts of kernel is disbled (e.g. scheduler, locking).
Currently there is a single coverage collection mode (tracing), but the
API anticipates additional collection modes. Initially I also
implemented a second mode which exposes coverage in a fixed-size hash
table of counters (what Quentin used in his original patch). I've
dropped the second mode for simplicity.
This patch adds the necessary support on kernel side. The complimentary
compiler support was added in gcc revision 231296.
We've used this support to build syzkaller system call fuzzer, which has
found 90 kernel bugs in just 2 months:
https://github.com/google/syzkaller/wiki/Found-Bugs
We've also found 30+ bugs in our internal systems with syzkaller.
Another (yet unexplored) direction where kcov coverage would greatly
help is more traditional "blob mutation". For example, mounting a
random blob as a filesystem, or receiving a random blob over wire.
Why not gcov. Typical fuzzing loop looks as follows: (1) reset
coverage, (2) execute a bit of code, (3) collect coverage, repeat. A
typical coverage can be just a dozen of basic blocks (e.g. an invalid
input). In such context gcov becomes prohibitively expensive as
reset/collect coverage steps depend on total number of basic
blocks/edges in program (in case of kernel it is about 2M). Cost of
kcov depends only on number of executed basic blocks/edges. On top of
that, kernel requires per-thread coverage because there are always
background threads and unrelated processes that also produce coverage.
With inlined gcov instrumentation per-thread coverage is not possible.
kcov exposes kernel PCs and control flow to user-space which is
insecure. But debugfs should not be mapped as user accessible.
Based on a patch by Quentin Casasnovas.
[akpm@linux-foundation.org: make task_struct.kcov_mode have type `enum kcov_mode']
[akpm@linux-foundation.org: unbreak allmodconfig]
[akpm@linux-foundation.org: follow x86 Makefile layout standards]
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@google.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: David Drysdale <drysdale@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 5c9a8750a6)
Change-Id: I17b5e04f6e89b241924e78ec32ead79c38b860ce
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Changes in 4.4.106
can: ti_hecc: Fix napi poll return value for repoll
can: kvaser_usb: free buf in error paths
can: kvaser_usb: Fix comparison bug in kvaser_usb_read_bulk_callback()
can: kvaser_usb: ratelimit errors if incomplete messages are received
can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
can: ems_usb: cancel urb on -EPIPE and -EPROTO
can: esd_usb2: cancel urb on -EPIPE and -EPROTO
can: usb_8dev: cancel urb on -EPIPE and -EPROTO
virtio: release virtio index when fail to device_register
hv: kvp: Avoid reading past allocated blocks from KVP file
isa: Prevent NULL dereference in isa_bus driver callbacks
scsi: libsas: align sata_device's rps_resp on a cacheline
efi: Move some sysfs files to be read-only by root
ASN.1: fix out-of-bounds read when parsing indefinite length item
ASN.1: check for error from ASN1_OP_END__ACT actions
X.509: reject invalid BIT STRING for subjectPublicKey
x86/PCI: Make broadcom_postcore_init() check acpi_disabled
ALSA: pcm: prevent UAF in snd_pcm_info
ALSA: seq: Remove spurious WARN_ON() at timer check
ALSA: usb-audio: Fix out-of-bound error
ALSA: usb-audio: Add check return value for usb_string()
iommu/vt-d: Fix scatterlist offset handling
s390: fix compat system call table
kdb: Fix handling of kallsyms_symbol_next() return value
drm: extra printk() wrapper macros
drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU
media: dvb: i2c transfers over usb cannot be done from stack
arm64: KVM: fix VTTBR_BADDR_MASK BUG_ON off-by-one
KVM: VMX: remove I/O port 0x80 bypass on Intel hosts
arm64: fpsimd: Prevent registers leaking from dead tasks
ARM: BUG if jumping to usermode address in kernel mode
ARM: avoid faulting on qemu
scsi: storvsc: Workaround for virtual DVD SCSI version
thp: reduce indentation level in change_huge_pmd()
thp: fix MADV_DONTNEED vs. numa balancing race
mm: drop unused pmdp_huge_get_and_clear_notify()
Revert "drm/armada: Fix compile fail"
Revert "spi: SPI_FSL_DSPI should depend on HAS_DMA"
Revert "s390/kbuild: enable modversions for symbols exported from asm"
vti6: Don't report path MTU below IPV6_MIN_MTU.
ARM: OMAP2+: gpmc-onenand: propagate error on initialization failure
x86/hpet: Prevent might sleep splat on resume
selftest/powerpc: Fix false failures for skipped tests
module: set __jump_table alignment to 8
ARM: OMAP2+: Fix device node reference counts
ARM: OMAP2+: Release device node after it is no longer needed.
gpio: altera: Use handle_level_irq when configured as a level_high
HID: chicony: Add support for another ASUS Zen AiO keyboard
usb: gadget: configs: plug memory leak
USB: gadgetfs: Fix a potential memory leak in 'dev_config()'
kvm: nVMX: VMCLEAR should not cause the vCPU to shut down
libata: drop WARN from protocol error in ata_sff_qc_issue()
workqueue: trigger WARN if queue_delayed_work() is called with NULL @wq
scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters
irqchip/crossbar: Fix incorrect type of register size
KVM: nVMX: reset nested_run_pending if the vCPU is going to be reset
arm: KVM: Survive unknown traps from guests
arm64: KVM: Survive unknown traps from guests
spi_ks8995: fix "BUG: key accdaa28 not in .data!"
bnx2x: prevent crash when accessing PTP with interface down
bnx2x: fix possible overrun of VFPF multicast addresses array
bnx2x: do not rollback VF MAC/VLAN filters we did not configure
ipv6: reorder icmpv6_init() and ip6_mr_init()
crypto: s5p-sss - Fix completing crypto request in IRQ handler
i2c: riic: fix restart condition
zram: set physical queue limits to avoid array out of bounds accesses
netfilter: don't track fragmented packets
axonram: Fix gendisk handling
drm/amd/amdgpu: fix console deadlock if late init failed
powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested
EDAC, i5000, i5400: Fix use of MTR_DRAM_WIDTH macro
EDAC, i5000, i5400: Fix definition of NRECMEMB register
kbuild: pkg: use --transform option to prefix paths in tar
mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl()
route: also update fnhe_genid when updating a route cache
route: update fnhe_expires for redirect when the fnhe exists
lib/genalloc.c: make the avail variable an atomic_long_t
dynamic-debug-howto: fix optional/omitted ending line number to be LARGE instead of 0
NFS: Fix a typo in nfs_rename()
sunrpc: Fix rpc_task_begin trace point
block: wake up all tasks blocked in get_request()
sparc64/mm: set fields in deferred pages
sctp: do not free asoc when it is already dead in sctp_sendmsg
sctp: use the right sk after waking up from wait_buf sleep
atm: horizon: Fix irq release error
jump_label: Invoke jump_label_test() via early_initcall()
xfrm: Copy policy family in clone_policy
IB/mlx4: Increase maximal message size under UD QP
IB/mlx5: Assign send CQ and recv CQ of UMR QP
afs: Connect up the CB.ProbeUuid
ipvlan: fix ipv6 outbound device
audit: ensure that 'audit=1' actually enables audit for PID 1
ipmi: Stop timers before cleaning up the module
s390: always save and restore all registers on context switch
more bio_map_user_iov() leak fixes
tipc: fix memory leak in tipc_accept_from_sock()
rds: Fix NULL pointer dereference in __rds_rdma_map
sit: update frag_off info
packet: fix crash in fanout_demux_rollover()
net/packet: fix a race in packet_bind() and packet_notifier()
Revert "x86/efi: Build our own page table structures"
Revert "x86/efi: Hoist page table switching code into efi_call_virt()"
Revert "x86/mm/pat: Ensure cpa->pfn only contains page frame numbers"
arm: KVM: Fix VTTBR_BADDR_MASK BUG_ON off-by-one
usb: gadget: ffs: Forbid usb_ep_alloc_request from sleeping
Linux 4.4.106
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 30b0da8d55 upstream.
We had only DRM_INFO() and DRM_ERROR(), whereas the underlying printk()
provides several other useful intermediate levels such as NOTICE and
WARNING. So this patch fills out the set by providing both regular and
once-only macros for each of the levels INFO, NOTICE, and WARNING, using
a common underlying macro that does all the token-pasting.
DRM_ERROR is unchanged, as it's not just a printk wrapper.
v2:
Fix whitespace, missing ## (Eric Engestrom)
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2e8fbf908 upstream.
The rps_resp buffer in ata_device is a DMA target, but it isn't
explicitly cacheline aligned. Due to this, adjacent fields can be
overwritten with stale data from memory on non-coherent architectures.
As a result, the kernel is sometimes unable to communicate with an SATA
device behind a SAS expander.
Fix this by ensuring that the rps_resp buffer is cacheline aligned.
This issue is similar to that fixed by Commit 84bda12af3 ("libata:
align ap->sector_buf") and Commit 4ee34ea3a1 ("libata: Align
ata_device's id on a cacheline").
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KASAN needs to know whether the allocation happens in an IRQ handler.
This lets us strip everything below the IRQ entry point to reduce the
number of unique stack traces needed to be stored.
Move the definition of __irq_entry to <linux/interrupt.h> so that the
users don't need to pull in <linux/ftrace.h>. Also introduce the
__softirq_entry macro which is similar to __irq_entry, but puts the
corresponding functions to the .softirqentry.text section.
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from be7635e728)
Change-Id: Ib321eb9c2b76ef4785cf3fd522169f524348bd9a
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Disable kasan after the first report. There are several reasons for
this:
- Single bug quite often has multiple invalid memory accesses causing
storm in the dmesg.
- Write OOB access might corrupt metadata so the next report will print
bogus alloc/free stacktraces.
- Reports after the first easily could be not bugs by itself but just
side effects of the first one.
Given that multiple reports usually only do harm, it makes sense to
disable kasan after the first one. If user wants to see all the
reports, the boot-time parameter kasan_multi_shot must be used.
[aryabinin@virtuozzo.com: wrote changelog and doc, added missing include]
Link: http://lkml.kernel.org/r/20170323154416.30257-1-aryabinin@virtuozzo.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from b0845ce583)
Change-Id: Ia8c6d40dd0d4f5b944bf3501c08d7a825070b116
Signed-off-by: Paul Lawrence <paullawrence@google.com>
<linux/kasan.h> is a low level header that is included early
in affected kernel headers. But it includes <linux/sched.h>
which complicates the cleanup of sched.h dependencies.
But kasan.h has almost no need for sched.h: its only use of
scheduler functionality is in two inline functions which are
not used very frequently - so uninline kasan_enable_current()
and kasan_disable_current().
Also add a <linux/sched.h> dependency to a .c file that depended
on kasan.h including it.
This paves the way to remove the <linux/sched.h> include from kasan.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Bug: 64145065
(cherry-picked from af8601ad42)
Change-Id: I13fd2d3927f663d694ea0d5bf44f18e2c62ae013
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Per memcg slab accounting and kasan have a problem with kmem_cache
destruction.
- kmem_cache_create() allocates a kmem_cache, which is used for
allocations from processes running in root (top) memcg.
- Processes running in non root memcg and allocating with either
__GFP_ACCOUNT or from a SLAB_ACCOUNT cache use a per memcg
kmem_cache.
- Kasan catches use-after-free by having kfree() and kmem_cache_free()
defer freeing of objects. Objects are placed in a quarantine.
- kmem_cache_destroy() destroys root and non root kmem_caches. It takes
care to drain the quarantine of objects from the root memcg's
kmem_cache, but ignores objects associated with non root memcg. This
causes leaks because quarantined per memcg objects refer to per memcg
kmem cache being destroyed.
To see the problem:
1) create a slab cache with kmem_cache_create(,,,SLAB_ACCOUNT,)
2) from non root memcg, allocate and free a few objects from cache
3) dispose of the cache with kmem_cache_destroy() kmem_cache_destroy()
will trigger a "Slab cache still has objects" warning indicating
that the per memcg kmem_cache structure was leaked.
Fix the leak by draining kasan quarantined objects allocated from non
root memcg.
Racing memcg deletion is tricky, but handled. kmem_cache_destroy() =>
shutdown_memcg_caches() => __shutdown_memcg_cache() => shutdown_cache()
flushes per memcg quarantined objects, even if that memcg has been
rmdir'd and gone through memcg_deactivate_kmem_caches().
This leak only affects destroyed SLAB_ACCOUNT kmem caches when kasan is
enabled. So I don't think it's worth patching stable kernels.
Link: http://lkml.kernel.org/r/1482257462-36948-1-git-send-email-gthelen@google.com
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from f9fa1d919c)
Change-Id: Ie054d9cde7fb1ce62e65776bff5a70f72925d037
Signed-off-by: Paul Lawrence <paullawrence@google.com>
The state of object currently tracked in two places - shadow memory, and
the ->state field in struct kasan_alloc_meta. We can get rid of the
latter. The will save us a little bit of memory. Also, this allow us
to move free stack into struct kasan_alloc_meta, without increasing
memory consumption. So now we should always know when the last time the
object was freed. This may be useful for long delayed use-after-free
bugs.
As a side effect this fixes following UBSAN warning:
UBSAN: Undefined behaviour in mm/kasan/quarantine.c:102:13
member access within misaligned address ffff88000d1efebc for type 'struct qlist_node'
which requires 8 byte alignment
Link: http://lkml.kernel.org/r/1470062715-14077-5-git-send-email-aryabinin@virtuozzo.com
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from b3cbd9bf77)
Change-Id: Iaa4959a78ffd2e49f9060099df1fb32483df3085
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Currently we may put reserved by mempool elements into quarantine via
kasan_kfree(). This is totally wrong since quarantine may really free
these objects. So when mempool will try to use such element,
use-after-free will happen. Or mempool may decide that it no longer
need that element and double-free it.
So don't put object into quarantine in kasan_kfree(), just poison it.
Rename kasan_kfree() to kasan_poison_kfree() to respect that.
Also, we shouldn't use kasan_slab_alloc()/kasan_krealloc() in
kasan_unpoison_element() because those functions may update allocation
stacktrace. This would be wrong for the most of the remove_element call
sites.
(The only call site where we may want to update alloc stacktrace is
in mempool_alloc(). Kmemleak solves this by calling
kmemleak_update_trace(), so we could make something like that too.
But this is out of scope of this patch).
Fixes: 55834c5909 ("mm: kasan: initial memory quarantine implementation")
Link: http://lkml.kernel.org/r/575977C3.1010905@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Kuthonuzo Luruo <kuthonuzo.luruo@hpe.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 9b75a867cc)
Change-Id: Idb6c152dae8f8f2975dbe6acb7165315be8b465b
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Quarantine isolates freed objects in a separate queue. The objects are
returned to the allocator later, which helps to detect use-after-free
errors.
When the object is freed, its state changes from KASAN_STATE_ALLOC to
KASAN_STATE_QUARANTINE. The object is poisoned and put into quarantine
instead of being returned to the allocator, therefore every subsequent
access to that object triggers a KASAN error, and the error handler is
able to say where the object has been allocated and deallocated.
When it's time for the object to leave quarantine, its state becomes
KASAN_STATE_FREE and it's returned to the allocator. From now on the
allocator may reuse it for another allocation. Before that happens,
it's still possible to detect a use-after free on that object (it
retains the allocation/deallocation stacks).
When the allocator reuses this object, the shadow is unpoisoned and old
allocation/deallocation stacks are wiped. Therefore a use of this
object, even an incorrect one, won't trigger ASan warning.
Without the quarantine, it's not guaranteed that the objects aren't
reused immediately, that's why the probability of catching a
use-after-free is lower than with quarantine in place.
Quarantine isolates freed objects in a separate queue. The objects are
returned to the allocator later, which helps to detect use-after-free
errors.
Freed objects are first added to per-cpu quarantine queues. When a
cache is destroyed or memory shrinking is requested, the objects are
moved into the global quarantine queue. Whenever a kmalloc call allows
memory reclaiming, the oldest objects are popped out of the global queue
until the total size of objects in quarantine is less than 3/4 of the
maximum quarantine size (which is a fraction of installed physical
memory).
As long as an object remains in the quarantine, KASAN is able to report
accesses to it, so the chance of reporting a use-after-free is
increased. Once the object leaves quarantine, the allocator may reuse
it, in which case the object is unpoisoned and KASAN can't detect
incorrect accesses to it.
Right now quarantine support is only enabled in SLAB allocator.
Unification of KASAN features in SLAB and SLUB will be done later.
This patch is based on the "mm: kasan: quarantine" patch originally
prepared by Dmitry Chernenkov. A number of improvements have been
suggested by Andrey Ryabinin.
[glider@google.com: v9]
Link: http://lkml.kernel.org/r/1462987130-144092-1-git-send-email-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 55834c5909)
Change-Id: Ib808d72a40f2e5137961d93dad540e85f8bbd2c4
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot
will allow KASAN store allocation/deallocation stack traces for memory
chunks. The stack traces are stored in a hash table and referenced by
handles which reside in the kasan_alloc_meta and kasan_free_meta
structures in the allocated memory chunks.
IRQ stack traces are cut below the IRQ entry point to avoid unnecessary
duplication.
Right now stackdepot support is only enabled in SLAB allocator. Once
KASAN features in SLAB are on par with those in SLUB we can switch SLUB
to stackdepot as well, thus removing the dependency on SLUB stack
bookkeeping, which wastes a lot of memory.
This patch is based on the "mm: kasan: stack depots" patch originally
prepared by Dmitry Chernenkov.
Joonsoo has said that he plans to reuse the stackdepot code for the
mm/page_owner.c debugging facility.
[akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t]
[aryabinin@virtuozzo.com: comment style fixes]
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from cd11016e5f)
Change-Id: Ic804318410823b95d84e264a6334e018f21ef943
Signed-off-by: Paul Lawrence <paullawrence@google.com>
DEBUG_SLAB_LEAK is a debug option. It's current implementation requires
status buffer so we need more memory to use it. And, it cause
kmem_cache initialization step more complex.
To remove this extra memory usage and to simplify initialization step,
this patch implement this feature with another way.
When user requests to get slab object owner information, it marks that
getting information is started. And then, all free objects in caches
are flushed to corresponding slab page. Now, we can distinguish all
freed object so we can know all allocated objects, too. After
collecting slab object owner information on allocated objects, mark is
checked that there is no free during the processing. If true, we can be
sure that our information is correct so information is returned to user.
Although this way is rather complex, it has two important benefits
mentioned above. So, I think it is worth changing.
There is one drawback that it takes more time to get slab object owner
information but it is just a debug option so it doesn't matter at all.
To help review, this patch implements new way only. Following patch
will remove useless code.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from d31676dfde)
Change-Id: I204ea0dd5553577d17c93f32f0d5a797ba0304af
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Currently, open code for checking DEBUG_PAGEALLOC cache is spread to
some sites. It makes code unreadable and hard to change.
This patch cleans up this code. The following patch will change the
criteria for DEBUG_PAGEALLOC cache so this clean-up will help it, too.
[akpm@linux-foundation.org: fix build with CONFIG_DEBUG_PAGEALLOC=n]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 40b4413797)
Change-Id: I784df4a54b62f77a22f8fa70990387fdf968219f
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Functions which the compiler has instrumented for ASAN place poison on
the stack shadow upon entry and remove this poison prior to returning.
In some cases (e.g. hotplug and idle), CPUs may exit the kernel a
number of levels deep in C code. If there are any instrumented
functions on this critical path, these will leave portions of the idle
thread stack shadow poisoned.
If a CPU returns to the kernel via a different path (e.g. a cold
entry), then depending on stack frame layout subsequent calls to
instrumented functions may use regions of the stack with stale poison,
resulting in (spurious) KASAN splats to the console.
Contemporary GCCs always add stack shadow poisoning when ASAN is
enabled, even when asked to not instrument a function [1], so we can't
simply annotate functions on the critical path to avoid poisoning.
Instead, this series explicitly removes any stale poison before it can
be hit. In the common hotplug case we clear the entire stack shadow in
common code, before a CPU is brought online.
On architectures which perform a cold return as part of cpu idle may
retain an architecture-specific amount of stack contents. To retain the
poison for this retained context, the arch code must call the core KASAN
code, passing a "watermark" stack pointer value beyond which shadow will
be cleared. Architectures which don't perform a cold return as part of
idle do not need any additional code.
This patch (of 3):
Functions which the compiler has instrumented for KASAN place poison on
the stack shadow upon entry and remove this poision prior to returning.
In some cases (e.g. hotplug and idle), CPUs may exit the kernel a number
of levels deep in C code. If there are any instrumented functions on this
critical path, these will leave portions of the stack shadow poisoned.
If a CPU returns to the kernel via a different path (e.g. a cold entry),
then depending on stack frame layout subsequent calls to instrumented
functions may use regions of the stack with stale poison, resulting in
(spurious) KASAN splats to the console.
To avoid this, we must clear stale poison from the stack prior to
instrumented functions being called. This patch adds functions to the
KASAN core for removing poison from (portions of) a task's stack. These
will be used by subsequent patches to avoid problems with hotplug and
idle.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from e3ae116339)
Change-Id: I9be31b714d5bdaec94a2dad3f0e468c094fe5fa2
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Changes in 4.4.105
bcache: only permit to recovery read error when cache device is clean
bcache: recover data from backing when data is clean
uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices
usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub
serial: 8250_pci: Add Amazon PCI serial device ID
s390/runtime instrumentation: simplify task exit handling
USB: serial: option: add Quectel BG96 id
ima: fix hash algorithm initialization
s390/pci: do not require AIS facility
selftests/x86/ldt_get: Add a few additional tests for limits
serial: 8250_fintek: Fix rs485 disablement on invalid ioctl()
spi: sh-msiof: Fix DMA transfer size check
usb: phy: tahvo: fix error handling in tahvo_usb_probe()
serial: 8250: Preserve DLD[7:4] for PORT_XR17V35X
x86/entry: Use SYSCALL_DEFINE() macros for sys_modify_ldt()
EDAC, sb_edac: Fix missing break in switch
sysrq : fix Show Regs call trace on ARM
perf test attr: Fix ignored test case result
kprobes/x86: Disable preemption in ftrace-based jprobes
net: systemport: Utilize skb_put_padto()
net: systemport: Pad packet before inserting TSB
ARM: OMAP1: DMA: Correct the number of logical channels
vti6: fix device register to report IFLA_INFO_KIND
net/appletalk: Fix kernel memory disclosure
ravb: Remove Rx overflow log messages
nfs: Don't take a reference on fl->fl_file for LOCK operation
KVM: arm/arm64: Fix occasional warning from the timer work function
NFSv4: Fix client recovery when server reboots multiple times
drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablement
net: sctp: fix array overrun read on sctp_timer_tbl
tipc: fix cleanup at module unload
dmaengine: pl330: fix double lock
tcp: correct memory barrier usage in tcp_check_space()
mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers
xen-netfront: Improve error handling during initialization
net: fec: fix multicast filtering hardware setup
Revert "ocfs2: should wait dio before inode lock in ocfs2_setattr()"
usb: hub: Cycle HUB power when initialization fails
usb: xhci: fix panic in xhci_free_virt_devices_depth_first
usb: Add USB 3.1 Precision time measurement capability descriptor support
usb: ch9: Add size macro for SSP dev cap descriptor
USB: core: Add type-specific length check of BOS descriptors
USB: Increase usbfs transfer limit
USB: devio: Prevent integer overflow in proc_do_submiturb()
USB: usbfs: Filter flags passed in from user space
usb: host: fix incorrect updating of offset
xen-netfront: avoid crashing on resume after a failure in talk_to_netback()
Linux 4.4.105
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 81cf4a4536 upstream.
As most of BOS descriptors are longer in length than their header
'struct usb_dev_cap_header', comparing solely with it is not sufficient
to avoid out-of-bounds access to BOS descriptors.
This patch adds descriptor type specific length check in
usb_get_bos_descriptor() to fix the issue.
Signed-off-by: Masakazu Mokuno <masakazu.mokuno@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 446fa3a95d upstream.
The SuperspeedPlus Device Capability Descriptor has a variable size
depending on the number of sublink speed attributes.
This patch adds a macro to calculate that size. The macro takes one
argument, the Sublink Speed Attribute Count (SSAC) as reported by the
descriptor in bmAttributes[4:0].
See USB 3.1 9.6.2.5, Table 9-19.
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit faee822c5a upstream.
USB 3.1 devices that support precision time measurement have an
additional PTM cabaility descriptor as part of the full BOS descriptor
Look for this descriptor while parsing the BOS descriptor, and store it in
struct usb_hub_bos if it exists.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0911d0041c ]
Some ->page_mkwrite handlers may return VM_FAULT_RETRY as its return
code (GFS2 or Lustre can definitely do this). However VM_FAULT_RETRY
from ->page_mkwrite is completely unhandled by the mm code and results
in locking and writeably mapping the page which definitely is not what
the caller wanted.
Fix Lustre and block_page_mkwrite_ret() used by other filesystems
(notably GFS2) to return VM_FAULT_NOPAGE instead which results in
bailing out from the fault code, the CPU then retries the access, and we
fault again effectively doing what the handler wanted.
Link: http://lkml.kernel.org/r/20170203150729.15863-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
