In reviewing the ivpu driver, DEFINE_DRM_ACCEL_FOPS could have been used
if DRM_ACCEL_FOPS defined .mmap to be drm_gem_mmap. Lets add that since
accel drivers are a variant of drm drivers, modern drm drivers are
expected to use GEM, and mmap() is a common operation that is expected
to be heavily used in accel drivers thus the common accel driver should
be able to just use DEFINE_DRM_ACCEL_FOPS() for convenience.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There are cases where it may be useful to dump the whole LBW configs.
Yet, doing so while spamming the kernel log will probably shade other
important messages since the LBW access is done in sheer volume.
To answer this we add trace events for those too.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When doing p2p with a NIC device, the NIC needs to make sure all the
writes to the HBM (through the PCI bar of the Gaudi device) were
flushed.
It can be done by either the NIC or the host reading through the PCI
bar.
To support the host side, we supply a simple uapi to perform this flush
through the driver, because the user can't create such a transaction
by itself (the PCI bar isn't exposed to normal users).
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Move the habanalabs.h uapi file from include/uapi/misc to
include/uapi/drm, and rename it to habanalabs_accel.h.
This is required before moving the actual driver to the accel
subsystem.
Update MAINTAINERS file accordingly.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add a uAPI, as part of the INFO IOCTL, to allow users to send
requests directly to f/w, according to a pre-defined set of opcodes
that the f/w exposes.
The f/w will put the result in a kernel-allocated buffer, which the
driver will then copy to the user-supplied buffer.
This will allow f/w tools to communicate directly with the f/w
without the need to add a new uAPI to the driver for each new type
of request.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
A previous commit deprecated the option to export from handle, leaving
the code with no support for devices with virtual memory.
This commit modifies the export API in a way that unifies the uAPI to
user address for both cases (i.e. with and without MMU support) and add
the actual support for devices with virtual memory.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As the COMMS protocol is being used more widely in our driver,
an available debug tool for the handshake will be handy.
This commit defines tracepoints to various key points of the COMMS
protocol.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The original goal with drm_edid_connector_update() was to have a single
call for updating the connector and adding probed modes, in this order,
but that turned out to be problematic. Drivers that need to update the
connector in the .detect() callback would end up updating the probed
modes as well. Turns out the callback may be called so many times that
the probed mode list fills up without bounds, and this is amplified by
add_alternate_cea_modes() duplicating the CEA modes on every call,
actually running out of memory on some machines.
Kudos to Imre Deak <imre.deak@intel.com> for explaining this to me.
Go back to having separate drm_edid_connector_update() and
drm_edid_connector_add_modes() calls. The former may be called from
.detect(), .force(), or .get_modes(), but the latter only from
.get_modes().
Unlike drm_add_edid_modes(), have drm_edid_connector_add_modes() update
the probed modes from the EDID property instead of the passed in
EDID. This is mainly to enforce two things:
1) drm_edid_connector_update() must be called before
drm_edid_connector_add_modes().
Display info and quirks are needed for parsing the modes, and we
don't want to call update_display_info() again to ensure the info is
available, like drm_add_edid_modes() does.
2) The same EDID is used for both updating the connector and adding the
probed modes.
Fortunately, the change is easy, because no driver has actually adopted
drm_edid_connector_update(). Not even i915, and that's mainly because of
the problem described above.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e86fff1579f14ebf6334692526c8f6831cd02cac.1674144945.git.jani.nikula@intel.com
Each of the user contexts has two command queues, one for compute engine
and one for the copy engine. Command queues are allocated and registered
in the device when the first job (command buffer) is submitted from
the user space to the VPU device. The userspace provides a list of
GEM buffer object handles to submit to the VPU, the driver resolves
buffer handles, pins physical memory if needed, increments ref count
for each buffer and stores pointers to buffer objects in
the ivpu_job objects that track jobs submitted to the device.
The VPU signals job completion with an asynchronous message that
contains the job id passed to firmware when the job was submitted.
Currently, the driver supports simple scheduling logic
where jobs submitted from user space are immediately pushed
to the VPU device command queues. In the future, it will be
extended to use hardware base scheduling and/or drm_sched.
Co-developed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-7-jacek.lawrynowicz@linux.intel.com
Adds four types of GEM-based BOs for the VPU:
- shmem
- internal
- prime
All types are implemented as struct ivpu_bo, based on
struct drm_gem_object. VPU address is allocated when buffer is created
except for imported prime buffers that allocate it in BO_INFO IOCTL due
to missing file_priv arg in gem_prime_import callback.
Internal buffers are pinned on creation, the rest of buffers types
can be pinned on demand (in SUBMIT IOCTL).
Buffer VPU address, allocated pages and mappings are released when the
buffer is destroyed.
Eviction mechanism is planned for future versions.
Add two new IOCTLs: BO_CREATE, BO_INFO
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-4-jacek.lawrynowicz@linux.intel.com
VPU Memory Management Unit is based on ARM MMU-600.
It allows the creation of multiple virtual address spaces for
the device and map noncontinuous host memory (there is no dedicated
memory on the VPU).
Address space is implemented as a struct ivpu_mmu_context, it has an ID,
drm_mm allocator for VPU addresses and struct ivpu_mmu_pgtable that
holds actual 3-level, 4KB page table.
Context with ID 0 (global context) is created upon driver initialization
and it's mainly used for mapping memory required to execute
the firmware.
Contexts with non-zero IDs are user contexts allocated each time
the devices is open()-ed and they map command buffers and other
workload-related memory.
Workloads executing in a given contexts have access only
to the memory mapped in this context.
This patch is has two main files:
- ivpu_mmu_context.c handles MMU page tables and memory mapping
- ivpu_mmu.c implements a driver that programs the MMU device
Co-developed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-3-jacek.lawrynowicz@linux.intel.com
VPU stands for Versatile Processing Unit and it's a CPU-integrated
inference accelerator for Computer Vision and Deep Learning
applications.
The VPU device consist of following components:
- Buttress - provides CPU to VPU integration, interrupt, frequency and
power management.
- Memory Management Unit (based on ARM MMU-600) - translates VPU to
host DMA addresses, isolates user workloads.
- RISC based microcontroller - executes firmware that provides job
execution API for the kernel-mode driver
- Neural Compute Subsystem (NCS) - does the actual work, provides
Compute and Copy engines.
- Network on Chip (NoC) - network fabric connecting all the components
This driver supports VPU IP v2.7 integrated into Intel Meteor Lake
client CPUs (14th generation).
Module sources are at drivers/accel/ivpu and module name is
"intel_vpu.ko".
This patch includes only very besic functionality:
- module, PCI device and IRQ initialization
- register definitions and low level register manipulation functions
- SET/GET_PARAM ioctls
- power up without firmware
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-2-jacek.lawrynowicz@linux.intel.com
Backmerging into drm-misc-next to get DRM accelerator infrastructure,
which is required by ipuv driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
The MIPI DCS specification demands that brightness values are sent in
big endian byte order. It also states that one parameter (i.e. one byte)
shall be sent/received for 8 bit wide values, and two parameters shall
be used for values that are between 9 and 16 bits wide.
Add new functions to properly handle 16-bit brightness in big endian,
since the two 8- and 16-bit cases are distinct from each other.
[richard: use separate functions instead of switch/case]
[richard: split into 16-bit component]
Fixes: 1a9d759331 ("drm/dsi: Implement DCS set/get display brightness")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: 754affd62d
[richard: fix 16-bit brightness_get]
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116224909.23884-2-mailingradian@gmail.com
Several DRM core and helper source files include drm_crtc_helper.h
without needing it or only to get its transitive include statements;
leading to unnecessary compile-time dependencies.
Directly include required headers and drop drm_crtc_helper.h where
possible. The header file, drm_fixed.h, includes <linux/kernel.h>
for lower_32_bits().
v2:
* include drm_crtc_helper.h in drm_crtc_helper.c (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116131235.18917-3-tzimmermann@suse.de
drm-misc-next for v6.3:
UAPI Changes:
* fourcc: Document Open Source user waiver
Cross-subsystem Changes:
* firmware: fix color-format selection for system framebuffers
Core Changes:
* format-helper: Add conversion from XRGB8888 to various sysfb formats;
Make XRGB8888 the only driver-emulated legacy format
* fb-helper: Avoid blank consoles from selecting an incorrect color format
* probe-helper: Enable/disable HPD on connectors plus driver updates
* Use drm_dbg_ helpers in several places
* docs: Document defaults for CRTC backgrounds; Document use of drm_minor
Driver Changes:
* arm/hdlcd: Use new debugfs helpers
* gud: Use new debugfs helpers
* panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert
many drivers to common generic DSI write-sequence helper
* v3d: Do not opencode drm_gem_object_lookup()
* vc4: Various HVS an CRTC fixes
* vkms: Fix SEGFAULT from incorrect GEM-buffer mapping
* Convert various drivers to i2c probe_new()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
The documentation for struct drm_minor already states this, but that's
not always that easy to find.
Also due to historical reasons we still have the minor-centric
interfaces (like drm_debugfs_create_files), but since this is now
getting fixed we can put a few more pointers in place as to how this
should be done ideally. Note that debugfs isn't there yet for all
cases (debugfs files on kms objects like crtc/connector aren't
supported, neither debugfs files with full fops), so the debugfs side
of this is still rather aspirational and more for new users than
converting everything existing. todo.rst covers the additional work
needed already.
Motivated by some discussion with Rodrigo on irc about how drm/xe
should lay out its sysfs interfaces.
v2: Make the debugfs situation clearer in the commit message, but
don't elaborate more in the actual kerneldoc to avoid distracting from
the main message around sysfs (Jani)
Also fix some typos.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Cc: Maíra Canal <mcanal@igalia.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Melissa Wen <mwen@igalia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230109164604.3860862-1-daniel.vetter@ffwll.ch
The structs drm_debugfs_info and drm_debugfs_entry don't have
descriptions for their parameters, which is causing the following warnings:
include/drm/drm_debugfs.h:93: warning: Function parameter or member
'name' not described in 'drm_debugfs_info'
include/drm/drm_debugfs.h:93: warning: Function parameter or member
'show' not described in 'drm_debugfs_info'
include/drm/drm_debugfs.h:93: warning: Function parameter or member
'driver_features' not described in 'drm_debugfs_info'
include/drm/drm_debugfs.h:93: warning: Function parameter or member
'data' not described in 'drm_debugfs_info'
include/drm/drm_debugfs.h:105: warning: Function parameter or member
'dev' not described in 'drm_debugfs_entry'
include/drm/drm_debugfs.h:105: warning: Function parameter or member
'file' not described in 'drm_debugfs_entry'
include/drm/drm_debugfs.h:105: warning: Function parameter or member
'list' not described in 'drm_debugfs_entry'
Therefore, fix the warnings by adding descriptions to all struct
parameters.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230105193039.287677-2-mcanal@igalia.com
Many panel drivers define dsi_dcs_write_seq() and dsi_generic_write_seq()
macros to send DCS commands and generic write packets respectively, with
the payload specified as a list of parameters instead of using arrays.
There's already a macro for the former, introduced by commit 2a9e9daf75
("drm/mipi-dsi: Introduce mipi_dsi_dcs_write_seq macro") so drivers can be
changed to use that. But there isn't one yet for the latter, let's add it.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102202542.3494677-2-javierm@redhat.com
