Add a sanity check in kvm_handle_memory_failure() to assert that a valid
x86_exception structure is provided if the memory "failure" wants to
propagate a fault into the guest. If a memory failure happens during a
direct guest physical memory access, e.g. for nested VMX, KVM hardcodes
the failure to X86EMUL_IO_NEEDED and doesn't provide an exception pointer
(because the exception struct would just be filled with garbage).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221220153427.514032-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In kvm_hv_flush_tlb(), 'data_offset' and 'consumed_xmm_halves' variables
are used in a mutually exclusive way: in 'hc->fast' we count in 'XMM
halves' and increase 'data_offset' otherwise. Coverity discovered, that in
one case both variables are incremented unconditionally. This doesn't seem
to cause any issues as the only user of 'data_offset'/'consumed_xmm_halves'
data is kvm_hv_get_tlb_flush_entries() -> kvm_hv_get_hc_data() which also
takes into account 'hc->fast' but is still worth fixing.
To make things explicit, put 'data_offset' and 'consumed_xmm_halves' to
'struct kvm_hv_hcall' as a union and use at call sites. This allows to
remove explicit 'data_offset'/'consumed_xmm_halves' parameters from
kvm_hv_get_hc_data()/kvm_get_sparse_vp_set()/kvm_hv_get_tlb_flush_entries()
helpers.
Note: 'struct kvm_hv_hcall' is allocated on stack in kvm_hv_hypercall() and
is not zeroed, consumers are supposed to initialize the appropriate field
if needed.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1527764 ("Uninitialized variables")
Fixes: 260970862c ("KVM: x86: hyper-v: Handle HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} calls gently")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221208102700.959630-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When scanning userspace I/OAPIC entries, intercept EOI for level-triggered
IRQs if the current vCPU has a pending and/or in-service IRQ for the
vector in its local API, even if the vCPU doesn't match the new entry's
destination. This fixes a race between userspace I/OAPIC reconfiguration
and IRQ delivery that results in the vector's bit being left set in the
remote IRR due to the eventual EOI not being forwarded to the userspace
I/OAPIC.
Commit 0fc5a36dd6 ("KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC
reconfigure race") fixed the in-kernel IOAPIC, but not the userspace
IOAPIC configuration, which has a similar race.
Fixes: 0fc5a36dd6 ("KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race")
Signed-off-by: Adamos Ttofari <attofari@amazon.de>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221208094415.12723-1-attofari@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current vPMU can reuse the same pmc->perf_event for the same
hardware event via pmc_pause/resume_counter(), but this optimization
does not apply to a portion of the TSX events (e.g., "event=0x3c,in_tx=1,
in_tx_cp=1"), where event->attr.sample_period is legally zero at creation,
thus making the perf call to perf_event_period() meaningless (no need to
adjust sample period in this case), and instead causing such reusable
perf_events to be repeatedly released and created.
Avoid releasing zero sample_period events by checking is_sampling_event()
to follow the previously enable/disable optimization.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20221207071506.15733-2-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently we are observing occasionally display flickering or complete
freeze. This is narrowed down to be caused by single full frame update
(SFF).
SFF bit after it's written gets cleared by HW in subsequent vblank
i.e. when the update is sent to the panel. SFF bit is required to be
written together with partial frame update (PFU) bit. After the SFF
bit gets cleared by the HW psr2 man trk ctl register still contains
PFU bit. If there is subsequent update for any reason we will end up
having selective update/fetch configuration where start line is 0 and
end line is 0. Also selective fetch configuration for the planes is
not properly performed. This seems to be causing problems with some
panels.
Using CFF without SFF doesn't work either because it may happen that
psr2 man track ctl register is overwritten by next update before
vblank triggers sending the update. This is causing problems to
psr_invalidate/flush. Using CFF and SFF together solves the problems
as SFF is cleared only by HW in subsequent vblank and the update gets
sent.
Fix the flickering/freeze issue by keeping CFF bit as set when PSR2 is
enabled unless there is a properly configured selective update via
atomic commit.
v2:
- Improve commit message and comments
- No functional changes
This is also workaround for HSD 14014971508
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Reported-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221201072308.1905679-1-jouni.hogander@intel.com
We only check the register opcode value inside the restricted ring
section, move it into the main io_uring_register() function instead
and check it up front.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A static analyser was complaining about not checking for null
pointers. However, the location of the complaint can only be reached
in the first place if said pointer is non-null. Basically, if we are
using a v69 GuC then the descriptor pool is guaranteed to be alocated
at start of day or submission will be disabled with an ENOMEM error.
And if we are using a later GuC that does not use a descriptor pool
then the v69 submission function would not be called. So, not a
possible null at that point in the code.
Hence adding a GEM_BUG_ON(!ptr) to keep the tool happy.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221221193031.687266-3-John.C.Harrison@Intel.com
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and small updates.
The only things of note is a qla2xxx fix for crash on hotplug and
timeout and the addition of a user exposed abstraction layer for
persistent reservation error return handling (which necessitates the
conversion of nvme.c as well as SCSI)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix crash when I/O abort times out
nvme: Convert NVMe errors to PR errors
scsi: sd: Convert SCSI errors to PR errors
scsi: core: Rename status_byte to sg_status_byte
block: Add error codes for common PR failures
scsi: sd: sd_zbc: Trace zone append emulation
scsi: libfc: Include the correct header
Pull afs update from David Howells:
"A fix for a couple of missing resource counter decrements, two small
cleanups of now-unused bits of code and a patch to remove writepage
support from afs"
* tag 'afs-next-20221222' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Stop implementing ->writepage()
afs: remove afs_cache_netfs and afs_zap_permits() declarations
afs: remove variable nr_servers
afs: Fix lost servers_outstanding count
Pull more perf tools updates from Arnaldo Carvalho de Melo:
"perf tools fixes and improvements:
- Don't stop building perf if python setuptools isn't installed, just
disable the affected perf feature.
- Remove explicit reference to python 2.x devel files, that warning
is about python-devel, no matter what version, being unavailable
and thus disabling the linking with libpython.
- Don't use -Werror=switch-enum when building the python support that
handles libtraceevent enumerations, as there is no good way to test
if some specific enum entry is available with the libtraceevent
installed on the system.
- Introduce 'perf lock contention' --type-filter and --lock-filter,
to filter by lock type and lock name:
$ sudo ./perf lock record -a -- ./perf bench sched messaging
$ sudo ./perf lock contention -E 5 -Y spinlock
contended total wait max wait avg wait type caller
802 1.26 ms 11.73 us 1.58 us spinlock __wake_up_common_lock+0x62
13 787.16 us 105.44 us 60.55 us spinlock remove_wait_queue+0x14
12 612.96 us 78.70 us 51.08 us spinlock prepare_to_wait+0x27
114 340.68 us 12.61 us 2.99 us spinlock try_to_wake_up+0x1f5
83 226.38 us 9.15 us 2.73 us spinlock folio_lruvec_lock_irqsave+0x5e
$ sudo ./perf lock contention -l
contended total wait max wait avg wait address symbol
57 1.11 ms 42.83 us 19.54 us ffff9f4140059000
15 280.88 us 23.51 us 18.73 us ffffffff9d007a40 jiffies_lock
1 20.49 us 20.49 us 20.49 us ffffffff9d0d50c0 rcu_state
1 9.02 us 9.02 us 9.02 us ffff9f41759e9ba0
$ sudo ./perf lock contention -L jiffies_lock,rcu_state
contended total wait max wait avg wait type caller
15 280.88 us 23.51 us 18.73 us spinlock tick_sched_do_timer+0x93
1 20.49 us 20.49 us 20.49 us spinlock __softirqentry_text_start+0xeb
$ sudo ./perf lock contention -L ffff9f4140059000
contended total wait max wait avg wait type caller
38 779.40 us 42.83 us 20.51 us spinlock worker_thread+0x50
11 216.30 us 39.87 us 19.66 us spinlock queue_work_on+0x39
8 118.13 us 20.51 us 14.77 us spinlock kthread+0xe5
- Fix splitting CC into compiler and options when checking if a
option is present in clang to build the python binding, needed in
systems such as yocto that set CC to, e.g.: "gcc --sysroot=/a/b/c".
- Refresh metris and events for Intel systems: alderlake.
alderlake-n, bonnell, broadwell, broadwellde, broadwellx,
cascadelakex, elkhartlake, goldmont, goldmontplus, haswell,
haswellx, icelake, icelakex, ivybridge, ivytown, jaketown,
knightslanding, meteorlake, nehalemep, nehalemex, sandybridge,
sapphirerapids, silvermont, skylake, skylakex, snowridgex,
tigerlake, westmereep-dp, westmereep-sp, westmereex.
- Add vendor events files (JSON) for AMD Zen 4, from sections
2.1.15.4 "Core Performance Monitor Counters", 2.1.15.5 "L3 Cache
Performance Monitor Counter"s and Section 7.1 "Fabric Performance
Monitor Counter (PMC) Events" in the Processor Programming
Reference (PPR) for AMD Family 19h Model 11h Revision B1
processors.
This constitutes events which capture op dispatch, execution and
retirement, branch prediction, L1 and L2 cache activity, TLB
activity, L3 cache activity and data bandwidth for various links
and interfaces in the Data Fabric.
- Also, from the same PPR are metrics taken from Section 2.1.15.2
"Performance Measurement", including pipeline utilization, which
are new to Zen 4 processors and useful for finding performance
bottlenecks by analyzing activity at different stages of the
pipeline.
- Greatly improve the 'srcline', 'srcline_from', 'srcline_to' and
'srcfile' sort keys performance by postponing calling the external
addr2line utility to the collapse phase of histogram bucketing.
- Fix 'perf test' "all PMU test" to skip parametrized events, that
requires setting up and are not supported by this test.
- Update tools/ copies of kernel headers: features,
disabled-features, fscrypt.h, i915_drm.h, msr-index.h, power pc
syscall table and kvm.h.
- Add .DELETE_ON_ERROR special Makefile target to clean up partially
updated files on error.
- Simplify the mksyscalltbl script for arm64 by avoiding to run the
host compiler to create the syscall table, do it all just with the
shell script.
- Further fixes to honour quiet mode (-q)"
* tag 'perf-tools-for-v6.2-2-2022-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (67 commits)
perf python: Fix splitting CC into compiler and options
perf scripting python: Don't be strict at handling libtraceevent enumerations
perf arm64: Simplify mksyscalltbl
perf build: Remove explicit reference to python 2.x devel files
perf vendor events amd: Add Zen 4 mapping
perf vendor events amd: Add Zen 4 metrics
perf vendor events amd: Add Zen 4 uncore events
perf vendor events amd: Add Zen 4 core events
perf vendor events intel: Refresh westmereex events
perf vendor events intel: Refresh westmereep-sp events
perf vendor events intel: Refresh westmereep-dp events
perf vendor events intel: Refresh tigerlake metrics and events
perf vendor events intel: Refresh snowridgex events
perf vendor events intel: Refresh skylakex metrics and events
perf vendor events intel: Refresh skylake metrics and events
perf vendor events intel: Refresh silvermont events
perf vendor events intel: Refresh sapphirerapids metrics and events
perf vendor events intel: Refresh sandybridge metrics and events
perf vendor events intel: Refresh nehalemex events
perf vendor events intel: Refresh nehalemep events
...
Although the device-centered debugfs functions can track requests for
the addition of DRM debugfs files at any time and have them added all
at once during drm_dev_register(), they are not able to create debugfs
files for modeset components, as they are registered after the primary
and the render drm_minor are registered.
So, create a drm_debugfs_late_register() function, which is responsible
for dealing with the creation of all the debugfs files for modeset
components at once. Therefore, the functions drm_debugfs_add_file()
and drm_debugfs_add_files() can be used in late_register hooks.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-4-mcanal@igalia.com
After we introduced a module parameter and quirk infrastructure for
picking the Microsoft GUID over the SOC vendor GUID we discovered
that lots and lots of systems are getting this wrong.
The table continues to grow, and is becoming unwieldy.
We don't really have any benefit to forcing vendors to populate the
AMD GUID. This is just extra work, and more and more vendors seem
to mess it up. As the Microsoft GUID is used by Windows as well,
it's very likely that it won't be messed up like this.
So drop all the quirks forcing it and the Rembrandt behavior. This
means that Cezanne or later effectively only run the Microsoft GUID
codepath with the exception of HP Elitebook 8*5 G9.
Fixes: fd894f05cf ("ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt")
Cc: stable@vger.kernel.org # 6.1
Reported-by: Benjamin Cheng <ben@bcheng.me>
Reported-by: bilkow@tutanota.com
Reported-by: Paul <paul@zogpog.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2292
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216768
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
HP Elitebook 865 supports both the AMD GUID w/ _REV 2 and Microsoft
GUID with _REV 0. Both have very similar code but the AMD GUID
has a special workaround that is specific to a problem with
spurious wakeups on systems with Qualcomm WLAN.
This is believed to be a bug in the Qualcomm WLAN F/W (it doesn't
affect any other WLAN H/W). If this WLAN firmware is fixed this
quirk can be dropped.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The apple-gmux driver only binds to old GMUX devices which have an
IORESOURCE_IO resource (using inb()/outb()) rather then memory-mapped
IO (IORESOURCE_MEM).
T2 MacBooks use the new style GMUX devices (with IORESOURCE_MEM access),
so these are not supported by the apple-gmux driver. This is not a problem
since they have working ACPI video backlight support.
But the apple_gmux_present() helper only checks if an ACPI device with
the "APP000B" HID is present, causing acpi_video_get_backlight_type()
to return acpi_backlight_apple_gmux disabling the acpi_video backlight
device.
Add a new apple_gmux_backlight_present() helper which checks that
the "APP000B" device actually is an old GMUX device with an IORESOURCE_IO
resource.
This fixes the acpi_video0 backlight no longer registering on T2 MacBooks.
Note people are working to add support for the new style GMUX to Linux:
https://github.com/kekrby/linux-t2/commits/wip/hybrid-graphics
Once this lands this patch should be reverted so that
acpi_video_get_backlight_type() also prefers the gmux on new style GMUX
MacBooks, but for now this is necessary to avoid regressing backlight
control on T2 Macs.
Fixes: 21245df307 ("ACPI: video: Add Apple GMUX brightness control detection")
Reported-and-tested-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Asus ExpertBook B2502 has the same keyboard issue as Asus Vivobook
K3402ZA/K3502ZA. The kernel overrides IRQ 1 to Edge_High when it
should be Active_Low.
This patch adds the ExpertBook B2502 model to the existing
quirk list of Asus laptops with this issue.
Fixes: b5f9223a10 ("ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2142574
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Schenker XMG CORE 15 (M22) is Ryzen-6 based and needs IRQ overriding
for the keyboard to work. Adding an entry for this laptop to the
override_table makes the internal keyboard functional again.
Signed-off-by: Erik Schumacher <ofenfisch@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI video detection code has a module parameter
`register_backlight_delay` which is currently configured to 8 seconds.
This means that if after 8 seconds of booting no native driver has created
a backlight device then the code will attempt to make an ACPI video
backlight device.
This was intended as a safety mechanism with the backlight overhaul that
occurred in kernel 6.1, but as it doesn't appear necesssary set it to be
disabled by default.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On desktop APUs amdgpu doesn't create a native backlight device
as no eDP panels are found. However if the BIOS has reported
backlight control methods in the ACPI tables then an acpi_video0
backlight device will be made 8 seconds after boot.
This has manifested in a power slider on a number of desktop APUs
ranging from Ryzen 5000 through Ryzen 7000 on various motherboard
manufacturers. To avoid this, report to the acpi video detection
that the system does not have any panel connected in the native
driver.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1783786
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current logic for the ACPI backlight detection will create
a backlight device if no native or vendor drivers have created
8 seconds after the system has booted if the ACPI tables
included backlight control methods.
If the GPU drivers have loaded, they may be able to report whether
any LCD panels were found. Allow using this information to factor
in whether to enable the fallback logic for making an acpi_video0
backlight device.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- fix doorbell buffer value endianness (Klaus Jensen)
- fix Linux vs NVMe page size mismatch (Keith Busch)
- fix a potential use memory access beyong the allocation limit
(Keith Busch)
- fix a multipath vs blktrace NULL pointer dereference
(Yanjun Zhang)"
* tag 'nvme-6.2-2022-12-22' of git://git.infradead.org/nvme:
nvme: fix multipath crash caused by flush request when blktrace is enabled
nvme-pci: fix page size checks
nvme-pci: fix mempool alloc size
nvme-pci: fix doorbell buffer value endianness
Noticed this build failure on archlinux:base when building with clang:
clang-14: error: optimization flag '-ffat-lto-objects' is not supported [-Werror,-Wignored-optimization-argument]
In tools/perf/util/setup.py we check if clang supports that option, but
since commit 3cad53a6f9 ("perf python: Account for multiple words
in CC") this got broken as in the common case where CC="clang":
>>> cc="clang"
>>> print(cc.split()[0])
clang
>>> option="-ffat-lto-objects"
>>> print(str(cc.split()[1:]) + option)
[]-ffat-lto-objects
>>>
And then the Popen will call clang with that bogus option name that in
turn will not produce the b"unknown argument" or b"is not supported"
that this function uses to detect if the option is not available and
thus later on clang will be called with an unknown/unsupported option.
Fix it by looking if really there are options in the provided CC
variable, and if so override 'cc' with the first token and append the
options to the 'option' variable.
Fixes: 3cad53a6f9 ("perf python: Account for multiple words in CC")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Khem Raj <raj.khem@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Link: http://lore.kernel.org/lkml/Y6Rq5F5NI0v1QQHM@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We're trying to get rid of the ->writepage() hook[1]. Stop afs from using
it by unlocking the page and calling afs_writepages_region() rather than
folio_write_one().
A flag is passed to afs_writepages_region() to indicate that it should only
write a single region so that we don't flush the entire file in
->write_begin(), but do add other dirty data to the region being written to
try and reduce the number of RPC ops.
This requires ->migrate_folio() to be implemented, so point that at
filemap_migrate_folio() for files and also for symlinks and directories.
This can be tested by turning on the afs_folio_dirty tracepoint and then
doing something like:
xfs_io -c "w 2223 7000" -c "w 15000 22222" -c "w 23 7" /afs/my/test/foo
and then looking in the trace to see if the write at position 15000 gets
stored before page 0 gets dirtied for the write at position 23.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20221113162902.883850-1-hch@lst.de/ [1]
Link: https://lore.kernel.org/r/166876785552.222254.4403222906022558715.stgit@warthog.procyon.org.uk/ # v1
The afs_fs_probe_dispatcher() work function is passed a count on
net->servers_outstanding when it is scheduled (which may come via its
timer). This is passed back to the work_item, passed to the timer or
dropped at the end of the dispatcher function.
But, at the top of the dispatcher function, there are two checks which
skip the rest of the function: if the network namespace is being destroyed
or if there are no fileservers to probe. These two return paths, however,
do not drop the count passed to the dispatcher, and so, sometimes, the
destruction of a network namespace, such as induced by rmmod of the kafs
module, may get stuck in afs_purge_servers(), waiting for
net->servers_outstanding to become zero.
Fix this by adding the missing decrements in afs_fs_probe_dispatcher().
Fixes: f6cbb368bc ("afs: Actively poll fileservers to maintain NAT or firewall openings")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/167164544917.2072364.3759519569649459359.stgit@warthog.procyon.org.uk/
ASoC: Updates for v6.2
Some more small fixes and board quirks that came in since my last
update, the main one being the fixes from Kai for issues around the
attempts to get kexec working well on SOF based systems.
Pull tracing fix from Steven Rostedt:
"I missed this minor hardening of the kernel in the first pull.
- Make monitor structures read only"
* tag 'trace-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv/monitors: Move monitor structure in rodata
Pull trace probes updates from Steven Rostedt:
- New "symstr" type for dynamic events that writes the name of the
function+offset into the ring buffer and not just the address
- Prevent kernel symbol processing on addresses in user space probes
(uprobes).
- And minor fixes and clean ups
* tag 'trace-probes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Reject symbol/symstr type for uprobe
tracing/probes: Add symstr type for dynamic events
kprobes: kretprobe events missing on 2-core KVM guest
kprobes: Fix check for probe enabled in kill_kprobe()
test_kprobes: Fix implicit declaration error of test_kprobes
tracing: Fix race where eprobes can be called before the event
Pull RISC-V kvm updates from Paolo Bonzini:
- Allow unloading KVM module
- Allow KVM user-space to set mvendorid, marchid, and mimpid
- Several fixes and cleanups
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
RISC-V: KVM: Add ONE_REG interface for mvendorid, marchid, and mimpid
RISC-V: KVM: Save mvendorid, marchid, and mimpid when creating VCPU
RISC-V: Export sbi_get_mvendorid() and friends
RISC-V: KVM: Move sbi related struct and functions to kvm_vcpu_sbi.h
RISC-V: KVM: Use switch-case in kvm_riscv_vcpu_set/get_reg()
RISC-V: KVM: Remove redundant includes of asm/csr.h
RISC-V: KVM: Remove redundant includes of asm/kvm_vcpu_timer.h
RISC-V: KVM: Fix reg_val check in kvm_riscv_vcpu_set_reg_config()
RISC-V: KVM: Simplify kvm_arch_prepare_memory_region()
RISC-V: KVM: Exit run-loop immediately if xfer_to_guest fails
RISC-V: KVM: use vma_lookup() instead of find_vma_intersection()
RISC-V: KVM: Add exit logic to main.c
Pull block fixes from Jens Axboe:
- Various fixes for BFQ (Yu, Yuwei)
- Fix for loop command line parsing (Isaac)
- No need to specifically clear REQ_ALLOC_CACHE on IOPOLL downgrade
anymore (me)
- blk-iocost enum fix for newer gcc (Jiri)
- UAF fix for queue release (Ming)
- blk-iolatency error handling memory leak fix (Tejun)
* tag 'block-6.2-2022-12-19' of git://git.kernel.dk/linux:
block: don't clear REQ_ALLOC_CACHE for non-polled requests
block: fix use-after-free of q->q_usage_counter
block, bfq: only do counting of pending-request for BFQ_GROUP_IOSCHED
blk-iolatency: Fix memory leak on add_disk() failures
loop: Fix the max_loop commandline argument treatment when it is set to 0
block/blk-iocost (gcc13): keep large values in a new enum
block, bfq: replace 0/1 with false/true in bic apis
block, bfq: don't return bfqg from __bfq_bic_change_cgroup()
block, bfq: fix possible uaf for 'bfqq->bic'
Pull io_uring fixes from Jens Axboe:
- Improve the locking for timeouts. This was originally queued up for
the initial pull, but I messed up and it got missed. (Pavel)
- Fix an issue with running task_work from the wait path, causing some
inefficiencies (me)
- Add a clear of ->free_iov upfront in the 32-bit compat data
importing, so we ensure that it's always sane at completion time (me)
- Use call_rcu_hurry() for the eventfd signaling (Dylan)
- Ordering fix for multishot recv completions (Pavel)
- Add the io_uring trace header to the MAINTAINERS entry (Ammar)
* tag 'io_uring-6.2-2022-12-19' of git://git.kernel.dk/linux:
MAINTAINERS: io_uring: Add include/trace/events/io_uring.h
io_uring/net: fix cleanup after recycle
io_uring/net: ensure compat import handlers clear free_iov
io_uring: include task_work run after scheduling in wait for events
io_uring: don't use TIF_NOTIFY_SIGNAL to test for availability of task_work
io_uring: use call_rcu_hurry if signaling an eventfd
io_uring: fix overflow handling regression
io_uring: ease timeout flush locking requirements
io_uring: revise completion_lock locking
io_uring: protect cq_timeouts with timeout_lock
