If GFX11 microcode is required but not available during early init, the
firmware framebuffer will have already been released and the screen will
freeze.
Move the request for GFX11 microcode into the early_init phase
so that if it's not available, driver init will fail.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper will provide symmetery on unload.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simplifies the code so that GFX10 will get the firmware
name from `amdgpu_ucode_ip_version_decode` and then use this filename
to load microcode as part of the early_init process.
Any failures will cause the driver to fail to probe before the firmware
framebuffer has been removed.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper is for symmetry on unload.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper will provide symmetry on unload.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper provides symmetry for releasing firmware.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an early_init phase to MES for fetching and validating microcode
from the filesystem.
If MES microcode is required but not available during early init, the
firmware framebuffer will have already been released and the screen will
freeze.
Move the request for MES microcode into the early_init phase
so that if it's not available, early_init will fail.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Smatch report warning as follows:
Line 53679: drivers/gpu/drm/amd/display/dc/core/dc_stream.c:402
dc_stream_set_cursor_position() warn: variable dereferenced before
check 'stream'
The value of 'dc' has been assigned after check whether 'stream' is
NULL. Fix it by remove redundant assignment.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, there are issues with enabling PSR-SU + DSC. This stems from
the fact that DSC imposes a slice height on transmitted video data and
we are not conforming to that slice height in PSR-SU regions. So, pass
slice_height into su_y_granularity to feed the DSC slice height into
PSR-SU code.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simplifies the code so that all VCN versions will get the firmware
name from `amdgpu_ucode_ip_version_decode` and then use this filename
to load microcode as part of the early_init process.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper is for symmetry.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When firmware is missing we get failures at every step.
```
[ 3.855086] amdgpu 0000:04:00.0: Direct firmware load for amdgpu/green_sardine_sdma.bin failed with error -2
[ 3.855087] [drm:amdgpu_sdma_init_microcode [amdgpu]] *ERROR* SDMA: Failed to init firmware "amdgpu/green_sardine_sdma.bin"
[ 3.855398] [drm:sdma_v4_0_early_init [amdgpu]] *ERROR* Failed to load sdma firmware!
```
Realistically we don't need all of these, a user can tell from the first one
that request_firmware emitted what happened. Drop the others.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All microcode runs a basic validation after it's been loaded. Each
IP block as part of init will run both.
Introduce a wrapper for request_firmware and amdgpu_ucode_validate.
This wrapper will also remap any error codes from request_firmware
to -ENODEV. This is so that early_init will fail if firmware couldn't
be loaded instead of the IP block being disabled.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removing the firmware framebuffer from the driver means that even
if the driver doesn't support the IP blocks in a GPU it will no
longer be functional after the driver fails to initialize.
This change will ensure that unsupported IP blocks at least cause
the driver to work with the EFI framebuffer.
Cc: stable@vger.kernel.org
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for the 1080x2400 Visionox VTDR6130 AMOLED DSI panel
found on the Qualcomm SM8550 MTP board.
By default the the panel is configured to work with DSI compressed
streams, but can work in uncompressed video mode since 1080x2400 in
RGB888 fits in the 4 DSI lanes bandwidth.
While display compression is preferred for performance and power
reasons, let's start with the uncompressed video mode support and
add the DSC support later on.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
[narmstrong: moved drm/display/ include file before drm/drm_]
Link: https://patchwork.freedesktop.org/patch/msgid/20230103-topic-sm8550-upstream-vtdr6130-panel-v2-2-dd6200f47a76@linaro.org
This commit fixes vertical timings of the VEC (composite output) modes
to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R
standards.
Previous timings were actually defined as 502 and 601 lines, resulting
in non-standard 62.69 Hz and 52 Hz signals being generated,
respectively.
Changes to vc4_crtc.c have also been made, to make the PixelValve
vertical timings accurately correspond to the DRM modeline in interlaced
modes. The resulting VERTA/VERTB register values have been verified
against the reference values set by the Raspberry Pi firmware.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-13-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The HVS can change AXI request mode based on how full the COB
FIFOs are.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.
With HVS channel 2 now being used for live video, change the
panic mode for all channels to be explicitly set by the driver,
and the same for all channels.
Fixes: c54619b0bf ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-2-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The HVS Composite Output Buffer (COB) is the memory used to
generate the output pixel data.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.
In testing triple screen support it has been noted that only
1 line was being assigned to HVS channel 2. Whilst that is fine
for the transposer (TXP), and indeed needed as only some pixels
have an alpha channel, it is insufficient to run a live display.
Split the COB more evenly between the 3 HVS channels.
Fixes: c54619b0bf ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-1-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Many panel drivers define dsi_dcs_write_seq() and dsi_generic_write_seq()
macros to send DCS commands and generic write packets respectively, with
the payload specified as a list of parameters instead of using arrays.
There's already a macro for the former, introduced by commit 2a9e9daf75
("drm/mipi-dsi: Introduce mipi_dsi_dcs_write_seq macro") so drivers can be
changed to use that. But there isn't one yet for the latter, let's add it.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102202542.3494677-2-javierm@redhat.com
