Changes in 4.9.63
gso: fix payload length when gso_size is zero
tun/tap: sanitize TUNSETSNDBUF input
ipv6: addrconf: increment ifp refcount before ipv6_del_addr()
netlink: do not set cb_running if dump's start() errs
net: call cgroup_sk_alloc() earlier in sk_clone_lock()
tcp: fix tcp_mtu_probe() vs highest_sack
l2tp: check ps->sock before running pppol2tp_session_ioctl()
tun: call dev_get_valid_name() before register_netdevice()
sctp: add the missing sock_owned_by_user check in sctp_icmp_redirect
tcp/dccp: fix ireq->opt races
packet: avoid panic in packet_getsockopt()
soreuseport: fix initialization race
ipv6: flowlabel: do not leave opt->tot_len with garbage
sctp: full support for ipv6 ip_nonlocal_bind & IP_FREEBIND
tcp/dccp: fix lockdep splat in inet_csk_route_req()
tcp/dccp: fix other lockdep splats accessing ireq_opt
net/unix: don't show information about sockets from other namespaces
tap: double-free in error path in tap_open()
ipip: only increase err_count for some certain type icmp in ipip_err
ip6_gre: only increase err_count for some certain type icmpv6 in ip6gre_err
ip6_gre: update dst pmtu if dev mtu has been updated by toobig in __gre6_xmit
tun: allow positive return values on dev_get_valid_name() call
sctp: reset owner sk for data chunks on out queues when migrating a sock
net_sched: avoid matching qdisc with zero handle
ppp: fix race in ppp device destruction
mac80211: accept key reinstall without changing anything
mac80211: use constant time comparison with keys
mac80211: don't compare TKIP TX MIC key in reinstall prevention
usb: usbtest: fix NULL pointer dereference
Input: ims-psu - check if CDC union descriptor is sane
ALSA: seq: Cancel pending autoload work at unbinding device
Revert "ARM: dts: imx53-qsb-common: fix FEC pinmux config"
netfilter: nat: avoid use of nf_conn_nat extension
netfilter: nat: Revert "netfilter: nat: convert nat bysrc hash to rhashtable"
security/keys: add CONFIG_KEYS_COMPAT to Kconfig
brcmfmac: remove setting IBSS mode when stopping AP
target/iscsi: Fix iSCSI task reassignment handling
qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT (v2)
misc: panel: properly restore atomic counter on error path
Linux 4.9.63
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit ea04efee76 upstream.
Before trying to use CDC union descriptor, try to validate whether that it
is sane by checking that intf->altsetting->extra is big enough and that
descriptor bLength is not too big and not too small.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes a steady memory leak in the keychord release code. A close of
the keychord device will leak 1 keychord structure. Easily
reproducible by a simple program that does an open()->write()->close()
of the keychord device.
Bug: 64483974
Change-Id: I1fa402c666cffb00b8cfd6379d9fe47a0989152c
Signed-off-by: Mohan Srinivasan <srmohan@google.com>
There are multiple bugs caused by threads racing in keychord_write.
1) Threads racing through this function can cause the same element to
be added to a linked list twice (multiple calls to
input_register_handler() for the same input_handler struct). And the
races can also cause an element in a linked list that doesn't exist
attempted to be removed (multiple calls to input_unregister_handler()
with the same input_handler struct).
2) The races can also cause duplicate kfree's of the keychords
struct.
Bug: 64133562
Bug: 63974334
Change-Id: I6329a4d58c665fab5d3e96ef96391e07b4941e80
Signed-off-by: Mohan Srinivasan <srmohan@google.com>
Fix a slab out of bounds read in keychord_write(), detected by KASAN.
Signed-off-by: Mohan Srinivasan <srmohan@google.com>
Bug: 63962952
Change-Id: Iafef48b5d7283750ac0f39f5aaa767b1c3bf2004
Changes in 4.9.19:
net/openvswitch: Set the ipv6 source tunnel key address attribute correctly
net: bcmgenet: Do not suspend PHY if Wake-on-LAN is enabled
net: properly release sk_frag.page
amd-xgbe: Fix jumbo MTU processing on newer hardware
openvswitch: Add missing case OVS_TUNNEL_KEY_ATTR_PAD
net: unix: properly re-increment inflight counter of GC discarded candidates
qmi_wwan: add Dell DW5811e
net: vrf: Reset rt6i_idev in local dst after put
net/mlx5: Add missing entries for set/query rate limit commands
net/mlx5e: Use the proper UAPI values when offloading TC vlan actions
net/mlx5: Increase number of max QPs in default profile
net/mlx5e: Count GSO packets correctly
net/mlx5e: Count LRO packets correctly
ipv6: make sure to initialize sockc.tsflags before first use
net: bcmgenet: remove bcmgenet_internal_phy_setup()
ipv4: provide stronger user input validation in nl_fib_input()
socket, bpf: fix sk_filter use after free in sk_clone_lock
tcp: initialize icsk_ack.lrcvtime at session start time
Input: ALPS - fix V8+ protocol handling (73 03 28)
Input: ALPS - fix trackstick button handling on V8 devices
Input: elan_i2c - add ASUS EeeBook X205TA special touchpad fw
Input: i8042 - add noloop quirk for Dell Embedded Box PC 3000
Input: iforce - validate number of endpoints before using them
Input: ims-pcu - validate number of endpoints before using them
Input: hanwang - validate number of endpoints before using them
Input: yealink - validate number of endpoints before using them
Input: cm109 - validate number of endpoints before using them
Input: kbtab - validate number of endpoints before using them
Input: sur40 - validate number of endpoints before using them
ALSA: seq: Fix racy cell insertions during snd_seq_pool_done()
ALSA: ctxfi: Fix the incorrect check of dma_set_mask() call
ALSA: hda - Adding a group of pin definition to fix headset problem
USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modems
USB: serial: qcserial: add Dell DW5811e
ACM gadget: fix endianness in notifications
usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerInterval
usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk
USB: uss720: fix NULL-deref at probe
USB: lvtest: fix NULL-deref at probe
USB: idmouse: fix NULL-deref at probe
USB: wusbcore: fix NULL-deref at probe
usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer
usb: hub: Fix crash after failure to read BOS descriptor
USB: usbtmc: add missing endpoint sanity check
USB: usbtmc: fix probe error path
uwb: i1480-dfu: fix NULL-deref at probe
uwb: hwa-rc: fix NULL-deref at probe
mmc: ushc: fix NULL-deref at probe
iio: adc: ti_am335x_adc: fix fifo overrun recovery
iio: sw-device: Fix config group initialization
iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
iio: magnetometer: ak8974: remove incorrect __exit markups
parport: fix attempt to write duplicate procfiles
ext4: mark inode dirty after converting inline directory
ext4: lock the xattr block before checksuming it
powerpc/64s: Fix idle wakeup potential to clobber registers
mmc: sdhci-of-at91: Support external regulators
mmc: sdhci-of-arasan: fix incorrect timeout clock
mmc: sdhci: Do not disable interrupts while waiting for clock
mmc: sdhci-pci: Do not disable interrupts in sdhci_intel_set_power
hwrng: amd - Revert managed API changes
hwrng: geode - Revert managed API changes
clk: sunxi-ng: sun6i: Fix enable bit offset for hdmi-ddc module clock
clk: sunxi-ng: mp: Adjust parent rate for pre-dividers
mwifiex: pcie: don't leak DMA buffers when removing
crypto: ccp - Assign DMA commands to the channel's CCP
xen/acpi: upload PM state from init-domain to Xen
iommu/vt-d: Fix NULL pointer dereference in device_to_iommu
Revert "ARM: at91/dt: sama5d2: Use new compatible for ohci node"
ARM: at91: pm: cpu_idle: switch DDR to power-down mode
arm64: kaslr: Fix up the kernel image alignment
cpufreq: Restore policy min/max limits on CPU online
cgroup, net_cls: iterate the fds of only the tasks which are being migrated
blk-mq: don't complete un-started request in timeout handler
drm/amdgpu: reinstate oland workaround for sclk
auxdisplay: img-ascii-lcd: add missing sentinel entry in img_ascii_lcd_matches
jbd2: don't leak memory if setting up journal fails
intel_th: Don't leak module refcount on failure to activate
Drivers: hv: vmbus: Don't leak channel ids
Drivers: hv: vmbus: Don't leak memory when a channel is rescinded
libceph: don't set weight to IN when OSD is destroyed
device-dax: fix pmd/pte fault fallback handling
drm/bridge: analogix dp: Fix runtime PM state on driver bind
nl80211: fix dumpit error path RTNL deadlocks
drm: reference count event->completion
fbcon: Fix vc attr at deinit
crypto: algif_hash - avoid zero-sized array
Linux 4.9.19
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit ac2ee9ba95 upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.
Fixes: c04148f915 ("Input: add driver for USB VoIP phones with CM109...")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5cc4a1a9f5 upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.
Fixes: aca951a22a ("[PATCH] input-driver-yealink-P1K-usb-phone")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1916d31927 upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack control-interface endpoints.
Fixes: 628329d524 ("Input: add IMS Passenger Control Unit driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 601bbbe051 upstream.
If user tries to initialize uinput device mixing old and new style
initialization (i.e. using old UI_SET_ABSBIT instead of UI_ABS_SETUP,
we forget to allocate input->absinfo and will crash when trying to send
absolute events:
ioctl(ui, UI_DEV_SETUP, &us);
ioctl(ui, UI_SET_PHYS, "Test");
ioctl(ui, UI_SET_EVBIT, EV_ABS);
ioctl(ui, UI_SET_ABSBIT, ABS_X);
ioctl(ui, UI_SET_ABSBIT, ABS_Y);
ioctl(ui, UI_DEV_CREATE, 0);
Reported-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=191811
Fixes: fbae10db09 ("Input: uinput - rework ABS validation")
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver allows userspace to receive notification when client
specified key combinations are pressed.
The client opens /dev/keychord and writes a list of keychords
for the driver to monitor.
The client then reads or polls /dev/keychord for notifications.
A client specified ID for the keychord is returned from read()
when a keychord press is detected.
Signed-off-by: Mike Lockwood <lockwood@android.com>
keychord: fix to build without CONFIG_PREEMPT
Change-Id: I911f13aeda4224b6fa57863bc7e8972fec8837fb
Remove the early suspend handler. Leave the suspend functions
for now, they should eventually get called through a userspace
interface.x
Change-Id: I67f9dafe32fe32577bab93c42b95824db96c215c
Signed-off-by: Colin Cross <ccross@android.com>
Supports keyboard matrixces, direct inputs, direct outputs and axes connected to gpios.
Change-Id: I5e921e6e3a1cc169316ee3b665f4cc21b5735114
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Nick Pelly <npelly@google.com>
commit 5a8a6b89c1 upstream.
We were assigning I2C bus controller instead of client as parent device.
Besides being logically wrong, it messed up with devm handling of input
device. As a result we were leaving input device and event node behind
after rmmod-ing the driver, which lead to a kernel oops if one were to
access the event node later.
Let's remove the assignment and rely on devm_input_allocate_device() to
set it up properly for us.
Signed-off-by: Jingkui Wang <jkwang@google.com>
Fixes: 7132fe4f56 ("Input: drv260x - add TI drv260x haptics driver")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull input subsystem updates from Dmitry Torokhov:
"You will get
- a new driver for Elan eKTF2127 touchscreen controllers
- a new "gpio-decoder" driver to read and report state of several
GPIO lines
- an ADC resistor ladder driver
- the ft6326 driver is removed because edt-ft5x06 handles the same
devices just fine.
.. plus the regular slew of driver fixes/enhancements"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits)
Input: elan_i2c - fix return tests of i2c_smbus_read_block_data()
Input: ektf2127 - mark PM functions as __maybe_unused
Input: snvs_pwrkey - drop input_free_device call if input_register_device fails
Input: add support for Elan eKTF2127 touchscreen controller
Input: serio - add hangup support
Input: tps65218-pwrbutton - add support for tps65217 variant
Input: jornada720_ts - get rid of mach/irqs.h and mach/hardware.h includes
Input: jornada720_kbd - remove unneeded mach/hardware.h include
Input: focaltech - mark focaltech_set_resolution() static
Input: wdt87xx_i2c - fix the flash erase issue
Input: gpio-keys-polled - don't use unit-address with button nodes
Input: add generic input driver to read encoded GPIO lines
Input: add ADC resistor ladder driver
Input: pegasus_notetaker - directly include workqueue header
Input: elants_i2c - get product id on recovery mode for FW update
Input: wm97xx - remove deprecated create_singletheread_workqueue
Input: mc13783_ts - remove deprecated create_singletheread_workqueue
Input: psmouse - remove deprecated create_singletheread_workqueue
Input: jornada720_kbd - switch to using dev_dbg
Input: jornada720_kbd - get rid of mach/irqs.h include
...
The power button found in tps65217 device is very similar to the tps65218,
so let's enhance the driver to support both variants.
This driver enables us to use tps65217's power button as KEY_POWER on
am335x boards (directly connected button in chiliboard, accessible pin
via expansion header in beaglebone). This patch has been tested with
chiliboard.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Many modules call misc_register and misc_deregister in its module init
and exit methods without any additional code. This ends up being
boilerplate. This patch adds helper macro module_misc_device(), that
replaces module_init()/ module_exit() with template functions.
This patch also converts drivers to use new macro.
Change since v1:
Add device.h include in miscdevice.h as module_driver macro was not
available from other include files in some architectures.
Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a driver to read group of GPIO lines and provide its status as a
numerical value as input event to the system. This will help in
interfacing devices, that can be connected over GPIOs, that provide
input to the system by driving GPIO lines connected to them like a
rotary dial or a switch.
For example, a rotary switch can be connected to four GPIO lines. The
status of the GPIO lines reflect the actual position of the rotary
switch dial. For example, if dial points to 9, then the four GPIO lines
connected to the switch will read HLLH(0b'1001 = 9). This value
can be reported as an ABS_* event to the input subsystem.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Change my email address to kernel.org instead of Samsung one for the
purpose of any future contact. The copyrights remain untouched and are
attributed to Samsung.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull more input updates from Dmitry Torokhov:
"Two new drivers for touchscreen controllers:
- Silead touchscreen controllers
- SiS 9200 family touchscreen controllers
and a few driver fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: silead - remove some dead code
Input: sis-i2c - select CONFIG_CRC_ITU_T
Input: add driver for SiS 9200 family I2C touchscreen controllers
Input: ili210x - fix permissions on "calibrate" attribute
Input: elan_i2c - properly wake up touchpad on ASUS laptops
Input: add driver for Silead touchscreens
Input: elantech - fix debug dump of the current packet
Input: rotary_encoder - support binary encoding of states
Input: xpad - power off wireless 360 controllers on suspend
Input: i8042 - break load dependency between atkbd/psmouse and i8042
Input: synaptics-rmi4 - do not check for NULL when calling of_node_put()
Input: cros_ec_keyb - cleanup use of dev
Pull input updates from Dmitry Torokhov:
"Updates for the input subsystem. This contains the following new
drivers promised in the last merge window:
- driver for touchscreen controller found in Surface 3
- driver for Pegasus Notetaker tablet
- driver for Atmel Captouch Buttons
- driver for Raydium I2C touchscreen controllers
- powerkey driver for HISI 65xx SoC
plus a few fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
Input: tty/vt/keyboard - use memdup_user()
Input: pegasus_notetaker - set device mode in reset_resume() if in use
Input: pegasus_notetaker - cancel workqueue's work in suspend()
Input: pegasus_notetaker - fix usb_autopm calls to be balanced
Input: pegasus_notetaker - handle usb control msg errors
Input: wacom_w8001 - handle errors from input_mt_init_slots()
Input: wacom_w8001 - resolution wasn't set for ABS_MT_POSITION_X/Y
Input: pixcir_ts - add support for axis inversion / swapping
Input: icn8318 - use of_touchscreen helpers for inverting / swapping axes
Input: edt-ft5x06 - add support for inverting / swapping axes
Input: of_touchscreen - add support for inverted / swapped axes
Input: synaptics-rmi4 - use the RMI_F11_REL_BYTES define in rmi_f11_rel_pos_report
Input: synaptics-rmi4 - remove unneeded variable
Input: synaptics-rmi4 - remove pointer to rmi_function in f12_data
Input: synaptics-rmi4 - support regulator supplies
Input: raydium_i2c_ts - check CRC of incoming packets
Input: xen-kbdfront - prefer xenbus_write() over xenbus_printf() where possible
Input: fix a double word "is is" in include/linux/input.h
Input: add powerkey driver for HISI 65xx SoC
Input: apanel - spelling mistake - "skiping" -> "skipping"
...
This driver provides a input driver for the power button on the
HiSi 65xx SoC for boards like HiKey.
This driver was originally by Zhiliang Xue <xuezhiliang@huawei.com>
then basically rewritten by Jorge, but preserving the original
module author credits.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
[jstultz: Reworked commit message, folded in other fixes/cleanups
from Jorge, implemented some larger cleanups suggested by DmitryT]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull more input subsystem updates from Dmitry Torokhov:
"Just a few more driver fixes; new drivers will be coming in the next
merge window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: pwm-beeper - fix - scheduling while atomic
Input: xpad - xbox one elite controller support
Input: xpad - add more third-party controllers
Input: xpad - prevent spurious input from wired Xbox 360 controllers
Input: xpad - move pending clear to the correct location
Input: uinput - handle compat ioctl for UI_SET_PHYS
Pwm config may sleep so defer it using a worker.
On a Freescale i.MX53 based board we ran into "BUG: scheduling while
atomic" because input_inject_event locks interrupts, but
imx_pwm_config_v2 sleeps.
Tested on Freescale i.MX53 SoC with 4.6.0.
Signed-off-by: Manfred Schlaegl <manfred.schlaegl@gmx.at>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull pwm updates from Thierry Reding:
"This set of changes introduces an atomic API to the PWM subsystem.
This is influenced by the DRM atomic API that was introduced a while
back, though it is obviously a lot simpler. The fundamental idea
remains the same, though: drivers provide a single callback to
implement the atomic configuration of a PWM channel.
As a side-effect the PWM subsystem gains the ability for initial state
retrieval, so that the logical state mirrors that of the hardware.
Many use-cases don't care about this, but for others it is essential.
These new features require changes in all users, which these patches
take care of. The core is transitioned to use the atomic callback if
available and provides a fallback mechanism for other drivers.
Changes to transition users and drivers to the atomic API are
postponed to v4.8"
* tag 'pwm/for-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits)
pwm: Add information about polarity, duty cycle and period to debugfs
pwm: Switch to the atomic API
pwm: Update documentation
pwm: Add core infrastructure to allow atomic updates
pwm: Add hardware readout infrastructure
pwm: Move the enabled/disabled info into pwm_state
pwm: Introduce the pwm_state concept
pwm: Keep PWM state in sync with hardware state
ARM: Explicitly apply PWM config extracted from pwm_args
drm: i915: Explicitly apply PWM config extracted from pwm_args
input: misc: pwm-beeper: Explicitly apply PWM config extracted from pwm_args
input: misc: max8997: Explicitly apply PWM config extracted from pwm_args
backlight: lm3630a: explicitly apply PWM config extracted from pwm_args
backlight: lp855x: Explicitly apply PWM config extracted from pwm_args
backlight: lp8788: Explicitly apply PWM config extracted from pwm_args
backlight: pwm_bl: Use pwm_get_args() where appropriate
fbdev: ssd1307fb: Use pwm_get_args() where appropriate
regulator: pwm: Use pwm_get_args() where appropriate
leds: pwm: Use pwm_get_args() where appropriate
input: misc: max77693: Use pwm_get_args() where appropriate
...
When running a 32-bit userspace on a 64-bit kernel, the UI_SET_PHYS
ioctl needs to be treated with special care, as it has the pointer
size encoded in the command.
Signed-off-by: Ricky Liang <jcliang@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The newly added Atmal captouch driver fails to build when CONFIG_I2C
is disabled:
drivers/input/misc/atmel_captouch.c: In function 'atmel_read':
drivers/input/misc/atmel_captouch.c:115:8: error: implicit declaration of function 'i2c_transfer' [-Werror=implicit-function-declaration]
This adds an explicit Kconfig dependency to prevent the broken
configuration.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: b06d43f7a3 ("Input: add Atmel Captouch Button driver")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Call pwm_apply_args() just after requesting the PWM device so that the
polarity and period are initialized according to the information
provided in pwm_args.
This is an intermediate state, and pwm_apply_args() should be dropped as
soon as the atomic PWM infrastructure is in place and the driver makes
use of it.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Call pwm_apply_args() just after requesting the PWM device so that the
polarity and period are initialized according to the information
provided in pwm_args.
This is an intermediate state, and pwm_apply_args() should be dropped as
soon as the atomic PWM infrastructure is in place and the driver makes
use of it.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The PWM framework has clarified the concept of reference PWM config (the
platform dependent config retrieved from the DT or the PWM lookup table)
and real PWM state.
Use pwm_get_args() when the PWM user wants to retrieve this reference
config and not the current state.
This is part of the rework allowing the PWM framework to support
hardware readout and expose real PWM state even when the PWM has just
been requested (before the user calls pwm_config/enable/disable()).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
commit e7ec014a47 ("Input: twl6040-vibra - update for device tree support")
made the separate vibra DT node to a subnode of the twl6040.
It now calls of_find_node_by_name() to locate the "vibra" subnode.
This function has a side effect to call of_node_put on() for the twl6040
parent node passed in as a parameter. This causes trouble later on.
Solution: we must call of_node_get() before of_find_node_by_name()
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
NULL pointer derefence happens when booting with DTB because the
platform data for haptic device is not set in supplied data from parent
MFD device.
The MFD device creates only platform data (from Device Tree) for itself,
not for haptic child.
Unable to handle kernel NULL pointer dereference at virtual address 0000009c
pgd = c0004000
[0000009c] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
(max8997_haptic_probe) from [<c03f9cec>] (platform_drv_probe+0x4c/0xb0)
(platform_drv_probe) from [<c03f8440>] (driver_probe_device+0x214/0x2c0)
(driver_probe_device) from [<c03f8598>] (__driver_attach+0xac/0xb0)
(__driver_attach) from [<c03f67ac>] (bus_for_each_dev+0x68/0x9c)
(bus_for_each_dev) from [<c03f7a38>] (bus_add_driver+0x1a0/0x218)
(bus_add_driver) from [<c03f8db0>] (driver_register+0x78/0xf8)
(driver_register) from [<c0101774>] (do_one_initcall+0x90/0x1d8)
(do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc)
(kernel_init_freeable) from [<c06bb5b4>] (kernel_init+0x8/0x114)
(kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c)
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: <stable@vger.kernel.org>
Fixes: 104594b01c ("Input: add driver support for MAX8997-haptic")
[k.kozlowski: Write commit message, add CC-stable]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
