This doesn't cause any behavior changes and will be used by overlay async
IO implementation.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On non-samefs overlay without xino, non pure upper inodes should use a
pseudo_dev assigned to each unique lower fs, but if lower layer is on the
same fs and upper layer, it has no pseudo_dev assigned.
In this overlay layers setup:
- two filesystems, A and B
- upper layer is on A
- lower layer 1 is also on A
- lower layer 2 is on B
Non pure upper overlay inode, whose origin is in layer 1 will have the
st_dev;st_ino values of the real lower inode before copy up and the
st_dev;st_ino values of the real upper inode after copy up.
Fix this inconsitency by assigning a unique pseudo_dev also for upper fs,
that will be used as st_dev value along with the lower inode st_dev for
overlay inodes in the case above.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This fixes ovl_lower_uuid_ok() to correctly detect the corner case:
- two filesystems, A and B, both have null uuid
- upper layer is on A
- lower layer 1 is also on A
- lower layer 2 is on B
In this case, bad_uuid would not have been set for B, because the check
only involved the list of lower fs. Hence we'll try to decode a layer 2
origin on layer 1 and fail.
We check for conflicting (and null) uuid among all lower layers, including
those layers that are on the same fs as the upper layer.
Reported-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Rename lower_fs[] array to fs[], extend its size by one and use index fsid
(instead of fsid-1) to access the fs[] array.
Initialize fs[0] with upper fs values. fsid 0 is reserved even with lower
only overlay, so fs[0] remains null in this case.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
No code uses the sb returned from this helper, so make it retrun a boolean
and rename it to ovl_same_fs().
The xino mode is irrelevant when all layers are on same fs, so instead of
describing samefs with mode OVL_XINO_OFF, use a new xino_mode state, which
is 0 in the case of samefs, -1 in the case of xino=off and > 0 with xino
enabled.
Create a new helper ovl_same_dev(), to use instead of the common check for
(ovl_same_fs() || xinobits).
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add kvm_vcpu_destroy() and wire up all architectures to call the common
function instead of their arch specific implementation. The common
destruction function will be used by future patches to move allocation
and initialization of vCPUs to common KVM code, i.e. to free resources
that are allocated by arch agnostic code.
No functional change intended.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the call to kvm_vcpu_uninit() in kvm_arch_vcpu_destroy() down a few
lines so that it is invoked immediately prior to freeing the vCPU. This
paves the way for moving the uninit and free sequence to common KVM code
without an associated functional change.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the call to kvm_vcpu_uninit() in kvm_arch_vcpu_destroy() down a few
lines so that it is invoked immediately prior to freeing the vCPU. This
paves the way for moving the uninit and free sequence to common KVM code
without an associated functional change.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that s390's implementation of kvm_arch_vcpu_init() is empty, move
the call to kvm_vcpu_init() above the allocation of the sie_page. This
paves the way for moving vcpu allocation and initialization into common
KVM code without any associated functional change.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move all of kvm_arch_vcpu_init(), which is invoked at the very end of
kvm_vcpu_init(), into kvm_arch_vcpu_create() in preparation of moving
the call to kvm_vcpu_init(). Moving kvm_vcpu_init() is itself a
preparatory step for moving allocation and initialization to common KVM
code.
No functional change inteded.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a pre-allocation arch hook to handle checks that are currently done
by arch specific code prior to allocating the vCPU object. This paves
the way for moving the allocation to common KVM code.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove KVM's declaration of kvm_arch_vcpu_free() now that the function
is gone from all architectures (several architectures were relying on
the forward declaration).
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the superfluous kvm_arch_vcpu_free() as it is no longer called
from commmon KVM code. Note, kvm_arch_vcpu_destroy() *is* called from
common code, i.e. choosing which function to whack is not completely
arbitrary.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove a bogus clearing of apf.msr_val from kvm_arch_vcpu_destroy().
apf.msr_val is only set to a non-zero value by kvm_pv_enable_async_pf(),
which is only reachable by kvm_set_msr_common(), i.e. by writing
MSR_KVM_ASYNC_PF_EN. KVM does not autonomously write said MSR, i.e.
can only be written via KVM_SET_MSRS or KVM_RUN. Since KVM_SET_MSRS and
KVM_RUN are vcpu ioctls, they require a valid vcpu file descriptor.
kvm_arch_vcpu_destroy() is only called if KVM_CREATE_VCPU fails, and KVM
declares KVM_CREATE_VCPU successful once the vcpu fd is installed and
thus visible to userspace. Ergo, apf.msr_val cannot be non-zero when
kvm_arch_vcpu_destroy() is called.
Fixes: 344d9588a9 ("KVM: Add PV MSR to enable asynchronous page faults delivery.")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86 does not load its MMU until KVM_RUN, which cannot be invoked until
after vCPU creation succeeds. Given that kvm_arch_vcpu_destroy() is
called if and only if vCPU creation fails, it is impossible for the MMU
to be loaded.
Note, the bogus kvm_mmu_unload() call was added during an unrelated
refactoring of vCPU allocation, i.e. was presumably added as an
opportunstic "fix" for a perceived leak.
Fixes: fb3f0f51d9 ("KVM: Dynamically allocate vcpus")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the superfluous kvm_arch_vcpu_free() as it is no longer called
from commmon KVM code. Note, kvm_arch_vcpu_destroy() *is* called from
common code, i.e. choosing which function to whack is not completely
arbitrary.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the superfluous kvm_arch_vcpu_free() as it is no longer called
from commmon KVM code. Note, kvm_arch_vcpu_destroy() *is* called from
common code, i.e. choosing which function to whack is not completely
arbitrary.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the superfluous kvm_arch_vcpu_free() as it is no longer called
from commmon KVM code. Note, kvm_arch_vcpu_destroy() *is* called from
common code, i.e. choosing which function to whack is not completely
arbitrary.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For reasons unknown, MIPS configures the vCPU allocation cache but
allocates vCPUs via kzalloc(). Allocate from the vCPU cache in
preparation for moving vCPU allocation to common KVM code.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the kvm_cpu_{un}init() calls to common PPC code as an intermediate
step towards removing kvm_cpu_{un}init() altogether.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the initialization of oldpir so that the call to kvm_vcpu_init() is
at the top of kvmppc_core_vcpu_create_e500mc(). oldpir is only use
when loading/putting a vCPU, which currently cannot be done until after
kvm_arch_vcpu_create() completes. Reording the call to kvm_vcpu_init()
paves the way for moving the invocation to common PPC code.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Call kvm_vcpu_init() in kvmppc_core_vcpu_create_pr() prior to allocating
the book3s and shadow_vcpu objects in preparation of moving said call to
common PPC code. Although kvm_vcpu_init() has an arch callback, the
callback is empty for Book3S PR, i.e. barring unseen black magic, moving
the allocation has no real functional impact.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move allocation of all flavors of PPC vCPUs to common PPC code. All
variants either allocate 'struct kvm_vcpu' directly, or require that
the embedded 'struct kvm_vcpu' member be located at offset 0, i.e.
guarantee that the allocation can be directly interpreted as a 'struct
kvm_vcpu' object.
Remove the message from the build-time assertion regarding placement of
the struct, as compatibility with the arch usercopy region is no longer
the sole dependent on 'struct kvm_vcpu' being at offset zero.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for moving vcpu allocation to common PPC code, add an
explicit, albeit redundant, build-time assert to ensure the vcpu member
is located at offset 0. The assert is redundant in the sense that
kvmppc_core_vcpu_create_e500() contains a functionally identical assert.
The motiviation for adding the extra assert is to provide visual
confirmation of the correctness of moving vcpu allocation to common
code.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the kvm_cpu_{un}init() calls to common x86 code as an intermediate
step to removing kvm_cpu_{un}init() altogether.
Note, VMX'x alloc_apic_access_page() and init_rmode_identity_map() are
per-VM allocations and are intentionally kept if vCPU creation fails.
They are freed by kvm_arch_destroy_vm().
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocate the pio_data page after creating the MMU and local APIC so that
all direct memory allocations are grouped together. This allows setting
the return value to -ENOMEM prior to starting the allocations instead of
setting it in the fail path for every allocation.
The pio_data page is only consumed when KVM_RUN is invoked, i.e. moving
its allocation has no real functional impact.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The allocation of FPU structs is identical across VMX and SVM, move it
to common x86 code. Somewhat arbitrarily place the allocation so that
it resides directly above the associated initialization via fx_init(),
e.g. instead of retaining its position with respect to the overall vcpu
creation flow. Although the names names kvm_arch_vcpu_create() and
kvm_arch_vcpu_init() might suggest otherwise, x86 does not have a clean
split between 'create' and 'init'. Allocating the struct immediately
prior to the first use arguably improves readability *now*, and will
yield even bigger improvements when kvm_arch_vcpu_init() is removed in
a future patch.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move allocation of VMX and SVM vcpus to common x86. Although the struct
being allocated is technically a VMX/SVM struct, it can be interpreted
directly as a 'struct kvm_vcpu' because of the pre-existing requirement
that 'struct kvm_vcpu' be located at offset zero of the arch/vendor vcpu
struct.
Remove the message from the build-time assertions regarding placement of
the struct, as compatibility with the arch usercopy region is no longer
the sole dependent on 'struct kvm_vcpu' being at offset zero.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Capture the vcpu pointer in a local varaible and replace '&svm->vcpu'
references with a direct reference to the pointer in anticipation of
moving bits of the code to common x86 and passing the vcpu pointer into
svm_create_vcpu(), i.e. eliminate unnecessary noise from future patches.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Capture the vcpu pointer in a local varaible and replace '&vmx->vcpu'
references with a direct reference to the pointer in anticipation of
moving bits of the code to common x86 and passing the vcpu pointer into
vmx_create_vcpu(), i.e. eliminate unnecessary noise from future patches.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do VPID allocation after calling the common kvm_vcpu_init() as a step
towards doing vCPU allocation (via kmem_cache_zalloc()) and calling
kvm_vcpu_init() back-to-back. Squishing allocation and initialization
together will eventually allow the sequence to be moved to arch-agnostic
creation code.
Note, the VPID is not consumed until KVM_RUN, slightly delaying its
allocation should have no real function impact. VPID allocation was
arbitrarily placed in the original patch, commit 2384d2b326 ("KVM:
VMX: Enable Virtual Processor Identification (VPID)").
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free the vCPU's wbinvd_dirty_mask if vCPU creation fails after
kvm_arch_vcpu_init(), e.g. when installing the vCPU's file descriptor.
Do the freeing by calling kvm_arch_vcpu_free() instead of open coding
the freeing. This adds a likely superfluous, but ultimately harmless,
call to kvmclock_reset(), which only clears vcpu->arch.pv_time_enabled.
Using kvm_arch_vcpu_free() allows for additional cleanup in the future.
Fixes: f5f48ee15c ("KVM: VMX: Execute WBINVD to keep data consistency with assigned devices")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly free the shared page if kvmppc_mmu_init() fails during
kvmppc_core_vcpu_create(), as the page is freed only in
kvmppc_core_vcpu_free(), which is not reached via kvm_vcpu_uninit().
Fixes: 96bc451a15 ("KVM: PPC: Introduce shared page")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the guest is configured to have SPEC_CTRL but the host does not
(which is a nonsensical configuration but these are not explicitly
forbidden) then a host-initiated MSR write can write vmx->spec_ctrl
(respectively svm->spec_ctrl) and trigger a #GP when KVM tries to
restore the host value of the MSR. Add a more comprehensive check
for valid bits of SPEC_CTRL, covering host CPUID flags and,
since we are at it and it is more correct that way, guest CPUID
flags too.
For AMD, remove the unnecessary is_guest_mode check around setting
the MSR interception bitmap, so that the code looks the same as
for Intel.
Cc: Jim Mattson <jmattson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Latest commit 853697504d ("tcp: Fix highest_sack and highest_sack_seq")
apparently allowed syzbot to trigger various crashes in TCP stack [1]
I believe this commit only made things easier for syzbot to find
its way into triggering use-after-frees. But really the bugs
could lead to bad TCP behavior or even plain crashes even for
non malicious peers.
I have audited all calls to tcp_rtx_queue_unlink() and
tcp_rtx_queue_unlink_and_free() and made sure tp->highest_sack would be updated
if we are removing from rtx queue the skb that tp->highest_sack points to.
These updates were missing in three locations :
1) tcp_clean_rtx_queue() [This one seems quite serious,
I have no idea why this was not caught earlier]
2) tcp_rtx_queue_purge() [Probably not a big deal for normal operations]
3) tcp_send_synack() [Probably not a big deal for normal operations]
[1]
BUG: KASAN: use-after-free in tcp_highest_sack_seq include/net/tcp.h:1864 [inline]
BUG: KASAN: use-after-free in tcp_highest_sack_seq include/net/tcp.h:1856 [inline]
BUG: KASAN: use-after-free in tcp_check_sack_reordering+0x33c/0x3a0 net/ipv4/tcp_input.c:891
Read of size 4 at addr ffff8880a488d068 by task ksoftirqd/1/16
CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:639
__asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:134
tcp_highest_sack_seq include/net/tcp.h:1864 [inline]
tcp_highest_sack_seq include/net/tcp.h:1856 [inline]
tcp_check_sack_reordering+0x33c/0x3a0 net/ipv4/tcp_input.c:891
tcp_try_undo_partial net/ipv4/tcp_input.c:2730 [inline]
tcp_fastretrans_alert+0xf74/0x23f0 net/ipv4/tcp_input.c:2847
tcp_ack+0x2577/0x5bf0 net/ipv4/tcp_input.c:3710
tcp_rcv_established+0x6dd/0x1e90 net/ipv4/tcp_input.c:5706
tcp_v4_do_rcv+0x619/0x8d0 net/ipv4/tcp_ipv4.c:1619
tcp_v4_rcv+0x307f/0x3b40 net/ipv4/tcp_ipv4.c:2001
ip_protocol_deliver_rcu+0x5a/0x880 net/ipv4/ip_input.c:204
ip_local_deliver_finish+0x23b/0x380 net/ipv4/ip_input.c:231
NF_HOOK include/linux/netfilter.h:307 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
ip_local_deliver+0x1e9/0x520 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:442 [inline]
ip_rcv_finish+0x1db/0x2f0 net/ipv4/ip_input.c:428
NF_HOOK include/linux/netfilter.h:307 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
ip_rcv+0xe8/0x3f0 net/ipv4/ip_input.c:538
__netif_receive_skb_one_core+0x113/0x1a0 net/core/dev.c:5148
__netif_receive_skb+0x2c/0x1d0 net/core/dev.c:5262
process_backlog+0x206/0x750 net/core/dev.c:6093
napi_poll net/core/dev.c:6530 [inline]
net_rx_action+0x508/0x1120 net/core/dev.c:6598
__do_softirq+0x262/0x98c kernel/softirq.c:292
run_ksoftirqd kernel/softirq.c:603 [inline]
run_ksoftirqd+0x8e/0x110 kernel/softirq.c:595
smpboot_thread_fn+0x6a3/0xa40 kernel/smpboot.c:165
kthread+0x361/0x430 kernel/kthread.c:255
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
Allocated by task 10091:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
__kasan_kmalloc mm/kasan/common.c:513 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:521
slab_post_alloc_hook mm/slab.h:584 [inline]
slab_alloc_node mm/slab.c:3263 [inline]
kmem_cache_alloc_node+0x138/0x740 mm/slab.c:3575
__alloc_skb+0xd5/0x5e0 net/core/skbuff.c:198
alloc_skb_fclone include/linux/skbuff.h:1099 [inline]
sk_stream_alloc_skb net/ipv4/tcp.c:875 [inline]
sk_stream_alloc_skb+0x113/0xc90 net/ipv4/tcp.c:852
tcp_sendmsg_locked+0xcf9/0x3470 net/ipv4/tcp.c:1282
tcp_sendmsg+0x30/0x50 net/ipv4/tcp.c:1432
inet_sendmsg+0x9e/0xe0 net/ipv4/af_inet.c:807
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:672
__sys_sendto+0x262/0x380 net/socket.c:1998
__do_sys_sendto net/socket.c:2010 [inline]
__se_sys_sendto net/socket.c:2006 [inline]
__x64_sys_sendto+0xe1/0x1a0 net/socket.c:2006
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 10095:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
kasan_set_free_info mm/kasan/common.c:335 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
__cache_free mm/slab.c:3426 [inline]
kmem_cache_free+0x86/0x320 mm/slab.c:3694
kfree_skbmem+0x178/0x1c0 net/core/skbuff.c:645
__kfree_skb+0x1e/0x30 net/core/skbuff.c:681
sk_eat_skb include/net/sock.h:2453 [inline]
tcp_recvmsg+0x1252/0x2930 net/ipv4/tcp.c:2166
inet_recvmsg+0x136/0x610 net/ipv4/af_inet.c:838
sock_recvmsg_nosec net/socket.c:886 [inline]
sock_recvmsg net/socket.c:904 [inline]
sock_recvmsg+0xce/0x110 net/socket.c:900
__sys_recvfrom+0x1ff/0x350 net/socket.c:2055
__do_sys_recvfrom net/socket.c:2073 [inline]
__se_sys_recvfrom net/socket.c:2069 [inline]
__x64_sys_recvfrom+0xe1/0x1a0 net/socket.c:2069
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff8880a488d040
which belongs to the cache skbuff_fclone_cache of size 456
The buggy address is located 40 bytes inside of
456-byte region [ffff8880a488d040, ffff8880a488d208)
The buggy address belongs to the page:
page:ffffea0002922340 refcount:1 mapcount:0 mapping:ffff88821b057000 index:0x0
raw: 00fffe0000000200 ffffea00022a5788 ffffea0002624a48 ffff88821b057000
raw: 0000000000000000 ffff8880a488d040 0000000100000006 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880a488cf00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8880a488cf80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8880a488d000: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
^
ffff8880a488d080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880a488d100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: 853697504d ("tcp: Fix highest_sack and highest_sack_seq")
Fixes: 50895b9de1 ("tcp: highest_sack fix")
Fixes: 737ff31456 ("tcp: use sequence distance to detect reordering")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cambda Zhu <cambda@linux.alibaba.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a lot of similar global registers being used across multiple SoCs
from Unisoc. But most of these registers are assigned with different offset
for different SoCs. It is hard to handle all of them in an all-in-one
kernel image.
Add a helper function to get regmap with arguments where we could put some
extra information such as the offset value.
Signed-off-by: Orson Zhai <orson.zhai@unisoc.com>
Tested-by: Baolin Wang <baolin.wang@unisoc.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
There is a bit which gets cleared after conversion.
Fixes: 9bb9e29c78 ("mfd: Add Ricoh RN5T618 PMIC core driver")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add microchip,sam9x60-usart and add microchip,sam9x60-dbgu to DT
bindings documentation.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add the cros-usbpd-notify driver as a subdevice on platforms that
support the EC_FEATURE_USB_PD EC feature flag and don't have the
ACPI PD notification device defined.
This driver allows other cros-ec devices to receive PD event
notifications from the Chrome OS Embedded Controller (EC) via a
notification chain.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The watchdog driver compatible is "dlg,da9062-watchdog" and not
"dlg,da9062-wdt". Therefore the mfd-core can't populate the of_node and
fwnode. As result the watchdog driver can't parse the devicetree.
Fixes: 9b40b030c4 ("mfd: da9062: Supply core driver")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Both manual and power on resets have a brief period where the chip will
not be accessible immediately afterwards. Extend the time allowed for
this from a minimum of 1mS to 2mS based on newer evaluation of the
hardware and ensure this reset happens in all reset conditions. Whilst
making the change also remove the redundant NULL checks in the reset
functions as the GPIO functions already check for this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
It is advised to wait for the boot done bit to be set before reading
any other register, update the driver to respect this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
