Pull arm64 fixes from Will Deacon:
"Here's a sizeable batch of Friday the 13th arm64 fixes for -rc4. What
could possibly go wrong?
The obvious reason we have so much here is because of the holiday
season right after the merge window, but we've also brought back an
erratum workaround that was previously dropped at the last minute and
there's an MTE coredumping fix that strays outside of the arch/arm64
directory.
Summary:
- Fix PAGE_TABLE_CHECK failures on hugepage splitting path
- Fix PSCI encoding of MEM_PROTECT_RANGE function in UAPI header
- Fix NULL deref when accessing debugfs node if PSCI is not present
- Fix MTE core dumping when VMA list is being updated concurrently
- Fix SME signal frame handling when SVE is not implemented by the
CPU
- Fix asm constraints for cmpxchg_double() to hazard both words
- Fix build failure with stack tracer and older versions of Clang
- Bring back workaround for Cortex-A715 erratum 2645198"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix build with CC=clang, CONFIG_FTRACE=y and CONFIG_STACK_TRACER=y
arm64/mm: Define dummy pud_user_exec() when using 2-level page-table
arm64: errata: Workaround possible Cortex-A715 [ESR|FAR]_ELx corruption
firmware/psci: Don't register with debugfs if PSCI isn't available
firmware/psci: Fix MEM_PROTECT_RANGE function numbers
arm64/signal: Always allocate SVE signal frames on SME only systems
arm64/signal: Always accept SVE signal frames on SME only systems
arm64/sme: Fix context switch for SME only systems
arm64: cmpxchg_double*: hazard against entire exchange variable
arm64/uprobes: change the uprobe_opcode_t typedef to fix the sparse warning
arm64: mte: Avoid the racy walk of the vma list during core dump
elfcore: Add a cprm parameter to elf_core_extra_{phdrs,data_size}
arm64: mte: Fix double-freeing of the temporary tag storage during coredump
arm64: ptrace: Use ARM64_SME to guard the SME register enumerations
arm64/mm: add pud_user_exec() check in pud_user_accessible_page()
arm64/mm: fix incorrect file_map_count for invalid pmd
In __alloc_and_insert_iova_range, there is an issue that retry_pfn
overflows. The value of iovad->anchor.pfn_hi is ~0UL, then when
iovad->cached_node is iovad->anchor, curr_iova->pfn_hi + 1 will
overflow. As a result, if the retry logic is executed, low_pfn is
updated to 0, and then new_pfn < low_pfn returns false to make the
allocation successful.
This issue occurs in the following two situations:
1. The first iova size exceeds the domain size. When initializing
iova domain, iovad->cached_node is assigned as iovad->anchor. For
example, the iova domain size is 10M, start_pfn is 0x1_F000_0000,
and the iova size allocated for the first time is 11M. The
following is the log information, new->pfn_lo is smaller than
iovad->cached_node.
Example log as follows:
[ 223.798112][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range
start_pfn:0x1f0000,retry_pfn:0x0,size:0xb00,limit_pfn:0x1f0a00
[ 223.799590][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range
success start_pfn:0x1f0000,new->pfn_lo:0x1efe00,new->pfn_hi:0x1f08ff
2. The node with the largest iova->pfn_lo value in the iova domain
is deleted, iovad->cached_node will be updated to iovad->anchor,
and then the alloc iova size exceeds the maximum iova size that can
be allocated in the domain.
After judging that retry_pfn is less than limit_pfn, call retry_pfn+1
to fix the overflow issue.
Signed-off-by: jianjiao zeng <jianjiao.zeng@mediatek.com>
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Cc: <stable@vger.kernel.org> # 5.15.*
Fixes: 4e89dce725 ("iommu/iova: Retry from last rb tree node if iova search fails")
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20230111063801.25107-1-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Similar to SMMUv2, this driver calls iommu_device_unregister() from the
shutdown path, which removes the IOMMU groups with no coordination
whatsoever with their users - shutdown methods are optional in device
drivers. This can lead to NULL pointer dereferences in those drivers'
DMA API calls, or worse.
Instead of calling the full arm_smmu_device_remove() from
arm_smmu_device_shutdown(), let's pick only the relevant function call -
arm_smmu_device_disable() - more or less the reverse of
arm_smmu_device_reset() - and call just that from the shutdown path.
Fixes: 57365a04c9 ("iommu: Move bus setup to IOMMU device registration")
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221215141251.3688780-2-vladimir.oltean@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
Michael Walle says he noticed the following stack trace while performing
a shutdown with "reboot -f". He suggests he got "lucky" and just hit the
correct spot for the reboot while there was a packet transmission in
flight.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 6.1.0-rc5-00088-gf3600ff8e322 #1930
Hardware name: Kontron KBox A-230-LS (DT)
pc : iommu_get_dma_domain+0x14/0x20
lr : iommu_dma_map_page+0x9c/0x254
Call trace:
iommu_get_dma_domain+0x14/0x20
dma_map_page_attrs+0x1ec/0x250
enetc_start_xmit+0x14c/0x10b0
enetc_xmit+0x60/0xdc
dev_hard_start_xmit+0xb8/0x210
sch_direct_xmit+0x11c/0x420
__dev_queue_xmit+0x354/0xb20
ip6_finish_output2+0x280/0x5b0
__ip6_finish_output+0x15c/0x270
ip6_output+0x78/0x15c
NF_HOOK.constprop.0+0x50/0xd0
mld_sendpack+0x1bc/0x320
mld_ifc_work+0x1d8/0x4dc
process_one_work+0x1e8/0x460
worker_thread+0x178/0x534
kthread+0xe0/0xe4
ret_from_fork+0x10/0x20
Code: d503201f f9416800 d503233f d50323bf (f9404c00)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
This appears to be reproducible when the board has a fixed IP address,
is ping flooded from another host, and "reboot -f" is used.
The following is one more manifestation of the issue:
$ reboot -f
kvm: exiting hardware virtualization
cfg80211: failed to load regulatory.db
arm-smmu 5000000.iommu: disabling translation
sdhci-esdhc 2140000.mmc: Removing from iommu group 11
sdhci-esdhc 2150000.mmc: Removing from iommu group 12
fsl-edma 22c0000.dma-controller: Removing from iommu group 17
dwc3 3100000.usb: Removing from iommu group 9
dwc3 3110000.usb: Removing from iommu group 10
ahci-qoriq 3200000.sata: Removing from iommu group 2
fsl-qdma 8380000.dma-controller: Removing from iommu group 20
platform f080000.display: Removing from iommu group 0
etnaviv-gpu f0c0000.gpu: Removing from iommu group 1
etnaviv etnaviv: Removing from iommu group 1
caam_jr 8010000.jr: Removing from iommu group 13
caam_jr 8020000.jr: Removing from iommu group 14
caam_jr 8030000.jr: Removing from iommu group 15
caam_jr 8040000.jr: Removing from iommu group 16
fsl_enetc 0000:00:00.0: Removing from iommu group 4
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000
fsl_enetc 0000:00:00.1: Removing from iommu group 5
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000
fsl_enetc 0000:00:00.2: Removing from iommu group 6
fsl_enetc_mdio 0000:00:00.3: Removing from iommu group 8
mscc_felix 0000:00:00.5: Removing from iommu group 3
fsl_enetc 0000:00:00.6: Removing from iommu group 7
pcieport 0001:00:00.0: Removing from iommu group 18
arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications
arm-smmu 5000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000
pcieport 0002:00:00.0: Removing from iommu group 19
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8
pc : iommu_get_dma_domain+0x14/0x20
lr : iommu_dma_unmap_page+0x38/0xe0
Call trace:
iommu_get_dma_domain+0x14/0x20
dma_unmap_page_attrs+0x38/0x1d0
enetc_unmap_tx_buff.isra.0+0x6c/0x80
enetc_poll+0x170/0x910
__napi_poll+0x40/0x1e0
net_rx_action+0x164/0x37c
__do_softirq+0x128/0x368
run_ksoftirqd+0x68/0x90
smpboot_thread_fn+0x14c/0x190
Code: d503201f f9416800 d503233f d50323bf (f9405400)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
The problem seems to be that iommu_group_remove_device() is allowed to
run with no coordination whatsoever with the shutdown procedure of the
enetc PCI device. In fact, it almost seems as if it implies that the
pci_driver :: shutdown() method is mandatory if DMA is used with an
IOMMU, otherwise this is inevitable. That was never the case; shutdown
methods are optional in device drivers.
This is the call stack that leads to iommu_group_remove_device() during
reboot:
kernel_restart
-> device_shutdown
-> platform_shutdown
-> arm_smmu_device_shutdown
-> arm_smmu_device_remove
-> iommu_device_unregister
-> bus_for_each_dev
-> remove_iommu_group
-> iommu_release_device
-> iommu_group_remove_device
I don't know much about the arm_smmu driver, but
arm_smmu_device_shutdown() invoking arm_smmu_device_remove() looks
suspicious, since it causes the IOMMU device to unregister and that's
where everything starts to unravel. It forces all other devices which
depend on IOMMU groups to also point their ->shutdown() to ->remove(),
which will make reboot slower overall.
There are 2 moments relevant to this behavior. First was commit
b06c076ea9 ("Revert "iommu/arm-smmu: Make arm-smmu explicitly
non-modular"") when arm_smmu_device_shutdown() was made to run the exact
same thing as arm_smmu_device_remove(). Prior to that, there was no
iommu_device_unregister() call in arm_smmu_device_shutdown(). However,
that was benign until commit 57365a04c9 ("iommu: Move bus setup to
IOMMU device registration"), which made iommu_device_unregister() call
remove_iommu_group().
Restore the old shutdown behavior by making remove() call shutdown(),
but shutdown() does not call the remove() specific bits.
Fixes: 57365a04c9 ("iommu: Move bus setup to IOMMU device registration")
Reported-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc> # on kontron-sl28
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221215141251.3688780-1-vladimir.oltean@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
Although it's vanishingly unlikely that anyone would integrate an SMMU
within a coherent interconnect without also making the pagetable walk
interface coherent, the same effect happens if a coherent SMMU fails to
advertise CTTW correctly. This turns out to be the case on some popular
NXP SoCs, where VFIO started failing the IOMMU_CAP_CACHE_COHERENCY test,
even though IOMMU_CACHE *was* previously achieving the desired effect
anyway thanks to the underlying integration.
While those SoCs stand to gain some more general benefits from a
firmware update to override CTTW correctly in DT/ACPI, it's also easy
to work around this in Linux as well, to avoid imposing too much on
affected users - since the upstream client devices *are* correctly
marked as coherent, we can trivially infer their coherent paths through
the SMMU as well.
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Fixes: df198b37e7 ("iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY better")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/d6dc41952961e5c7b21acac08a8bf1eb0f69e124.1671123115.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Merge an ACPI resource management quirk and an ACPI backlight driver fix
for 6.2-rc4:
- Skip ACPI IRQ override on Asus Expertbook B2402CBA (Tamim Khan).
- Add missing support for manual selection of NVidia-WMI-EC or Apple
GMUX backlight in the kernel command line to the ACPI backlight
driver (Hans de Goede).
* acpi-resource:
ACPI: resource: Skip IRQ override on Asus Expertbook B2402CBA
* acpi-video:
ACPI: video: Allow selecting NVidia-WMI-EC or Apple GMUX backlight from the cmdline
Currently qconf-cfg.sh is the only script that touches the "-bin"
target, even though all of the conf_cfg rules declare that they do.
Make the recipe unconditionally touch all declared targets to avoid
incompatibilities with upcoming versions of GNU make:
https://lists.gnu.org/archive/html/info-gnu/2022-10/msg00008.html
e.g.
scripts/kconfig/Makefile:215: warning: pattern recipe did not update peer target 'scripts/kconfig/nconf-bin'.
scripts/kconfig/Makefile:215: warning: pattern recipe did not update peer target 'scripts/kconfig/mconf-bin'.
scripts/kconfig/Makefile:215: warning: pattern recipe did not update peer target 'scripts/kconfig/gconf-bin'.
Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Current code for RSS_GET ethtool command includes netlink attributes
in reply message to user space even if they are null. Added checks
to include netlink attribute in reply message only if a value is
received from driver. Drivers might return null for RSS indirection
table or hash key. Instead of including attributes with empty value
in the reply message, add netlink attribute only if there is content.
Fixes: 7112a04664 ("ethtool: add netlink based get rss support")
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/20230111235607.85509-1-sudheer.mogilappagari@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Raju Rangoju says:
====================
amd-xgbe: PFC and KR-Training fixes
This patch series fixes the issues in kr-training and pfc
0001 - There is difference in the TX Flow Control registers (TFCR)
between the revisions of the hardware. Update the driver to use the
TFCR based on the reported version of the hardware.
0002 - AN restart triggered during KR training not only aborts the KR
training process but also move the HW to unstable state. Add the
necessary changes to fix kr-taining.
====================
Link: https://lore.kernel.org/r/20230111172852.1875384-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AN restart triggered during KR training not only aborts the KR training
process but also move the HW to unstable state. Driver has to wait upto
500ms or until the KR training is completed before restarting AN cycle.
Fixes: 7c12aa0877 ("amd-xgbe: Move the PHY support into amd-xgbe")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is difference in the TX Flow Control registers (TFCR) between the
revisions of the hardware. The older revisions of hardware used to have
single register per queue. Whereas, the newer revision of hardware (from
ver 30H onwards) have one register per priority.
Update the driver to use the TFCR based on the reported version of the
hardware.
Fixes: c5aa9e3b81 ("amd-xgbe: Initial AMD 10GbE platform driver")
Co-developed-by: Ajith Nayak <Ajith.Nayak@amd.com>
Signed-off-by: Ajith Nayak <Ajith.Nayak@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
Some fixes, stack only for now:
* iTXQ conversion fixes, various bugs reported
* properly reset multiple BSSID settings
* fix for a link_sta crash
* fix for AP VLAN checks
* fix for MLO address translation
* tag 'wireless-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix MLO + AP_VLAN check
mac80211: Fix MLO address translation for multiple bss case
wifi: mac80211: reset multiple BSSID options in stop_ap()
wifi: mac80211: Fix iTXQ AMPDU fragmentation handling
wifi: mac80211: sdata can be NULL during AMPDU start
wifi: mac80211: Proper mark iTXQs for resumption
wifi: mac80211: fix initialization of rx->link and rx->link_sta
====================
Link: https://lore.kernel.org/r/20230112111941.82408-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
msm-fixes for v6.3-rc4
Display Fixes:
- Fix the documentation for dpu_encoder_phys_wb_init() and
dpu_encoder_phys_wb_setup_fb() APIs to address doc warnings
- Remove vcca-supply and vdds-supply as mandatory for 14nm PHY and
10nm PHY DT schemas respectively as they are not present on some
SOCs using these PHYs
- Add the dsi-phy-regulator-ldo-mode to dsi-phy-28nm.yaml as it was
missed out during txt to yaml migration
- Remove operating-points-v2 and power-domain as a required property
for the DSI controller as thats not the case for every SOC
- Fix the description from display escape clock to display core
clock in the dsi controller yaml
- Fix the memory leak for mdp1-mem path for the cases when we return
early after failing to get mdp0-mem ICC paths for msm
- Fix error handling path in msm_hdmi_dev_probe() to release the phy
ref count when devm_pm_runtime_enable() fails
- Fix the dp_aux_isr() routine to make sure it doesnt incorrectly
signal the aux transaction as complete if the ISR was not an AUX
isr. This fixes a big hitter stability bug on chromebooks.
- Add protection against null pointer dereference when there is no
kms object as in the case of headless adreno GPU in the shutdown
path.
GPU Fixes:
- a5xx: fix quirks to actually be a bitmask and not overwrite each
other
- a6xx: fix gx halt sequence to avoid 1000ms hang on some devices
- kexec shutdown fix
- fix potential double free
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv7=in_MHW3kdkhqh7ZFoVCmnikmr29YYHCXR=7aOEneg@mail.gmail.com
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc.
The rxrpc changes are noticeable large: to address a recent regression
has been necessary completing the threaded refactor.
Current release - regressions:
- rxrpc:
- only disconnect calls in the I/O thread
- move client call connection to the I/O thread
- fix incoming call setup race
- eth: mlx5:
- restore pkt rate policing support
- fix memory leak on updating vport counters
Previous releases - regressions:
- gro: take care of DODGY packets
- ipv6: deduct extension header length in rawv6_push_pending_frames
- tipc: fix unexpected link reset due to discovery messages
Previous releases - always broken:
- sched: disallow noqueue for qdisc classes
- eth: ice: fix potential memory leak in ice_gnss_tty_write()
- eth: ixgbe: fix pci device refcount leak
- eth: mlx5:
- fix command stats access after free
- fix macsec possible null dereference when updating MAC security
entity (SecY)"
* tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
r8152: add vendor/device ID pair for Microsoft Devkit
net: stmmac: add aux timestamps fifo clearance wait
bnxt: make sure we return pages to the pool
net: hns3: fix wrong use of rss size during VF rss config
ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit()
net: sched: disallow noqueue for qdisc classes
iavf/iavf_main: actually log ->src mask when talking about it
igc: Fix PPS delta between two synchronized end-points
ixgbe: fix pci device refcount leak
octeontx2-pf: Fix resource leakage in VF driver unbind
selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.
selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.
selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".
net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)
net/mlx5e: Fix macsec ssci attribute handling in offload path
net/mlx5: E-switch, Coverity: overlapping copy
net/mlx5e: Don't support encap rules with gbp option
net/mlx5: Fix ptp max frequency adjustment range
net/mlx5e: Fix memory leak on updating vport counters
...
Pull s390 fixes from Heiko Carstens:
- Add various missing READ_ONCE() to cmpxchg() loops prevent the
compiler from potentially generating incorrect code. This includes a
rather large change to the s390 specific hardware sampling code and
its current use of cmpxchg_double().
Do the fix now to get it out of the way of Peter Zijlstra's
cmpxchg128() work, and have something that can be backported. The
added new code includes a private 128 bit cmpxchg variant which will
be removed again after Peter's rework is available. Also note that
this 128 bit cmpxchg variant is used to implement 128 bit
READ_ONCE(), while strictly speaking it wouldn't be necessary, and
_READ_ONCE() should also be sufficient; even though it isn't obvious
for all converted locations that this is the case. Therefore use this
implementation for for the sake of clarity and consistency for now.
- Fix ipl report address handling to avoid kdump failures/hangs.
- Fix misuse of #(el)if in kernel decompressor.
- Define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36,
caused by the recently changed discard behaviour.
- Make sure _edata and _end symbols are always page aligned.
- The current header guard DEBUG_H in one of the s390 specific header
files is too generic and conflicts with the ath9k wireless driver.
Add an _ASM_S390_ prefix to the guard to make it unique.
- Update defconfigs.
* tag 's390-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
KVM: s390: interrupt: use READ_ONCE() before cmpxchg()
s390/percpu: add READ_ONCE() to arch_this_cpu_to_op_simple()
s390/cpum_sf: add READ_ONCE() semantics to compare and swap loops
s390/kexec: fix ipl report address for kdump
s390: fix -Wundef warning for CONFIG_KERNEL_ZSTD
s390: define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36
s390: expicitly align _edata and _end symbols on page boundary
s390/debug: add _ASM_S390_ prefix to header guard
Pull xen fixes from Juergen Gross:
- two cleanup patches
- a fix of a memory leak in the Xen pvfront driver
- a fix of a locking issue in the Xen hypervisor console driver
* tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvcalls: free active map buffer on pvcalls_front_free_map
hvc/xen: lock console list traversal
x86/xen: Remove the unused function p2m_index()
xen: make remove callback of xen driver void returned
Pull timer doc fixes from Ingo Molnar:
- Fix various DocBook formatting errors in kernel/time/ that generated
(justified) warnings during a kernel-doc build.
* tag 'timers-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix various kernel-doc problems
Pull perf events hw enablement from Ingo Molnar:
- More hardware-enablement for Intel Meteor Lake & Emerald Rapid
systems: pure model ID enumeration additions that do not affect other
systems.
* tag 'perf-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add Emerald Rapids
perf/x86/msr: Add Emerald Rapids
perf/x86/msr: Add Meteor Lake support
perf/x86/cstate: Add Meteor Lake support
Pull scheduler fixes from Ingo Molnar:
- Fix scheduler frequency invariance bug related to overly long
tickless periods triggering an integer overflow and disabling the
feature.
- Fix use-after-free bug in dup_user_cpus_ptr().
- Fix do_set_cpus_allowed() deadlock scenarios related to calling
kfree() with the pi_lock held. NOTE: the rcu_free() is the 'lazy'
solution here - we looked at patches to free the structure after the
pi_lock got dropped, but that looked quite a bit messier - and none
of this is truly performance critical. We can revisit this if it's
too lazy of a solution ...
* tag 'sched-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Use kfree_rcu() in do_set_cpus_allowed()
sched/core: Fix use-after-free bug in dup_user_cpus_ptr()
sched/core: Fix arch_scale_freq_tick() on tickless systems
Pull objtool fix from Ingo Molnar:
- Fix objtool to be more permissive with hand-written assembly that
uses non-function symbols in executable sections.
* tag 'core-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Tolerate STT_NOTYPE symbols at end of section
Pull nolibc fixes from Paul McKenney:
- The fd_set structure was incorrectly defined as arrays of u32 instead
of long, which breaks BE64. Fix courtesy of Sven Schnelle.
- S_ISxxx macros were incorrectly testing the bits after applying them
instead of bitwise ANDing S_FMT with the value. Fix from Warner Losh.
- The mips code was randomly broken due to an unprotected "noreorder"
directive in the _start code that could prevent the assembler from
filling delayed slots. This in turn resulted in random other
instructions being placed into those slots. Fix courtesy of Willy
Tarreau.
- The current nolibc header layout refrains from including files that
are not explicitly included by the code using nolibc. Unfortunately,
this causes build failures when such files contain definitions that
are used (for example) by libgcc. Example definitions include raise()
and memset(), which are called by some architectures, but only at
certain optimization levels. Fix courtesy of Willy Tarreau.
- gcc 11.3 in ARM thumb2 mode at -O2 recognized a memset() construction
inside the memset() definition. The compiler replaced this
construction with a call to... memset(). Userland cannot be forced to
build with -ffreestanding, so an empty asm() statement was introduced
into the loop the loop in order to prevent the compiler from making
this unproductive transformation. Fix courtesy of Willy Tarreau.
- Most of the O_* macros were wrong on RISCV because their octal values
were coded as hexadecimal. This resulted in the getdents64() selftest
failing. Fix courtesy of Willy Tarreau.
This was tested on x86_64, i386, armv5, armv7, thumb1, thumb2, mips and
riscv, all at -O0, -Os and -O3.
* tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/nolibc: fix the O_* fcntl/open macro definitions for riscv
tools/nolibc: prevent gcc from making memset() loop over itself
tools/nolibc: fix missing includes causing build issues at -O0
tools/nolibc: restore mips branch ordering in the _start block
tools/nolibc: Fix S_ISxxx macros
nolibc: fix fd_set type
We are missing a ) when we attempt to complain about not having enough
configuration for clang, resulting in the rather inscrutable error:
../lib.mk:23: *** unterminated call to function 'error': missing ')'. Stop.
Add the required ) so we print the message we were trying to print.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
acpi_get_and_request_gpiod() does not take a gpio_lookup_flags argument
specifying that the pins direction should be initialized to a specific
value.
This means that in some cases the pins might be left in input mode, causing
the gpiod_set() calls made to enable the clk / regulator to not work.
One example of this problem is the clk-enable GPIO for the ov01a1s sensor
on a Dell Latitude 9420 being left in input mode causing the clk to
never get enabled.
Explicitly set the direction of the pins to output to fix this.
Fixes: 5de691bffe ("platform/x86: Add intel_skl_int3472 driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230111201426.947853-1-hdegoede@redhat.com
Commit fb541ca4c3 ("md: remove lock_bdev / unlock_bdev") removes
wrappers for blkdev_get/blkdev_put. However, the uninitialized local
static variable of pointer type 'claim_rdev' in md_import_device()
is NULL, which leads to the following warning call trace:
WARNING: CPU: 22 PID: 1037 at block/bdev.c:577 bd_prepare_to_claim+0x131/0x150
CPU: 22 PID: 1037 Comm: mdadm Not tainted 6.2.0-rc3+ #69
..
RIP: 0010:bd_prepare_to_claim+0x131/0x150
..
Call Trace:
<TASK>
? _raw_spin_unlock+0x15/0x30
? iput+0x6a/0x220
blkdev_get_by_dev.part.0+0x4b/0x300
md_import_device+0x126/0x1d0
new_dev_store+0x184/0x240
md_attr_store+0x80/0xf0
kernfs_fop_write_iter+0x128/0x1c0
vfs_write+0x2be/0x3c0
ksys_write+0x5f/0xe0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
It turns out the md device cannot be used:
md: could not open device unknown-block(259,0).
md: md127 stopped.
Fix the issue by declaring the local static variable of struct type
and passing the pointer of the variable to blkdev_get_by_dev().
Fixes: fb541ca4c3 ("md: remove lock_bdev / unlock_bdev")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Unlike keys where userspace only reacts to keypresses, userspace may act
on switches in both (0 and 1) of their positions.
For example if a SW_TABLET_MODE switch is registered then GNOME will not
automatically show the onscreen keyboard when a text field gets focus on
touchscreen devices when SW_TABLET_MODE reports 0 and when SW_TABLET_MODE
reports 1 libinput will block (filter out) builtin keyboard and touchpad
events.
So to avoid unwanted side-effects EV_SW type inputs should only be
registered if they are actually present, only register SW_CAMERA_LENS_COVER
if it is actually there.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221221220724.119594-2-hdegoede@redhat.com
Use KE_VSW instead of KE_SW for the SW_CAMERA_LENS_COVER key_entry
and get the value of the switch from the status field when handling
SW_CAMERA_LENS_COVER events, instead of always reporting 0.
Also correctly set the initial SW_CAMERA_LENS_COVER value.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221221220724.119594-1-hdegoede@redhat.com
sp_usb_phy_probe() will call platform_get_resource_byname() that may fail
and return NULL. devm_ioremap() will use usbphy->moon4_res_mem->start as
input, which may causes null-ptr-deref. Check the ret value of
platform_get_resource_byname() to avoid the null-ptr-deref.
Fixes: 99d9ccd973 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221125021222.25687-1-shangxiaojing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It is possible that we (the host/kernel driver) receive command messages
that are not intended for us. Ignore those for now.
The whole story is a bit more complicated: It is possible to enable
debug output on SAM, which is sent via SSH command messages. By default
this output is sent to a debug connector, with its own target ID
(TID=0x03). It is possible to override the target of the debug output
and set it to the host/kernel driver. This, however, does not change the
original target ID of the message. Meaning, we receive messages with
TID=0x03 (debug) but expect to only receive messages with TID=0x00
(host).
The problem is that the different target ID also comes with a different
scope of request IDs. In particular, these do not follow the standard
event rules (i.e. do not fall into a set of small reserved values).
Therefore, current message handling interprets them as responses to
pending requests and tries to match them up via the request ID. However,
these debug output messages are not in fact responses, and therefore
this will at best fail to find the request and at worst pass on the
wrong data as response for a request.
Therefore ignore any command messages not intended for us (host) for
now. We can implement support for the debug messages once we have a
better understanding of them.
Note that this may also provide a bit more stability and avoid some
driver confusion in case any other targets want to talk to us in the
future, since we don't yet know what to do with those as well. A warning
for the dropped messages should suffice for now and also give us a
chance of discovering new targets if they come along without any
potential for bugs/instabilities.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221202223327.690880-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- Identify quirks for Apple controllers (Hector Martin)
- fix error handling in nvme_pci_enable (Tong Zhang)
- refuse unprivileged passthrough on partitions (Christoph Hellwig)
- fix MAINTAINERS to not match nvmem subsystem headers (Russell King)"
* tag 'nvme-6.2-2023-01-12' of git://git.infradead.org/nvme:
MAINTAINERS: stop nvme matching for nvmem files
nvme: don't allow unprivileged passthrough on partitions
nvme: replace the "bool vec" arguments with flags in the ioctl path
nvme: remove __nvme_ioctl
nvme-pci: fix error handling in nvme_pci_enable()
nvme-pci: add NVME_QUIRK_IDENTIFY_CNS quirk to Apple T2 controllers
nvme-apple: add NVME_QUIRK_IDENTIFY_CNS quirk to fix regression
If we have multiple requests waiting on the same target poll waitqueue,
then it's quite possible to get a request triggered and get disappointed
in not being able to make any progress with it. If we race in doing so,
we'll potentially leave the poll request on the internal tables, but
removed from the waitqueue. That means that any subsequent trigger of
the poll waitqueue will not kick that request into action, causing an
application to potentially wait for completion of a request that will
never happen.
Fix this by adding a new poll return state, IOU_POLL_REISSUE. Rather
than have complicated logic for how to re-arm a given type of request,
just punt it for a reissue.
While in there, move the 'ret' variable to the only section where it
gets used. This avoids confusion the scope of it.
Cc: stable@vger.kernel.org
Fixes: eb0089d629 ("io_uring: single shot poll removal optimisation")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
