Haiyang Zhang says:
====================
hv_netvsc: Fix send indirection table offset
Fix send indirection table offset issues related to guest and
host bugs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If negotiated NVSP version <= NVSP_PROTOCOL_VERSION_6, the offset may
be wrong (too small) due to a host bug. This can cause missing the
end of the send indirection table, and add multiple zero entries from
leading zeros before the data region. This bug adds extra burden on
channel 0.
So fix the offset by computing it from the data structure sizes. This
will ensure netvsc driver runs normally on unfixed hosts, and future
fixed hosts.
Fixes: 5b54dac856 ("hyperv: Add support for virtual Receive Side Scaling (vRSS)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To reach the data region, the existing code adds offset in struct
nvsp_5_send_indirect_table on the beginning of this struct. But the
offset should be based on the beginning of its container,
struct nvsp_message. This bug causes the first table entry missing,
and adds an extra zero from the zero pad after the data region.
This can put extra burden on the channel 0.
So, correct the offset usage. Also add a boundary check to ensure
not reading beyond data region.
Fixes: 5b54dac856 ("hyperv: Add support for virtual Receive Side Scaling (vRSS)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While using ARCH=mips CROSS_COMPILE=mips-linux-gnu- command to compile,
make C=2 drivers/net/ethernet/freescale/enetc/enetc.o
one warning can be found:
drivers/net/ethernet/freescale/enetc/enetc.c:1439:5:
warning: symbol 'enetc_setup_tc_mqprio' was not declared.
Should it be static?
This patch make symbol enetc_setup_tc_mqprio static.
Fixes: 34c6adf197 ("enetc: Configure the Time-Aware Scheduler via tc-taprio offload")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NET_RAW is less dangerous, so more likely to be available to a process,
so check it first to prevent some spurious logging.
This matches IP_TRANSPARENT which checks NET_RAW first.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the lpfc driver sizes its cpu_map array based on
num_possible_cpus(). However, that can be a value that is less than the
highest cpu id bit that is set. As such, if a thread runs on a cpu with a
larger cpu id, or for_each_possible_cpu() is used, the driver could index
off the end of the array and return garbage or GPF.
The driver maintains its own internal copy of the "num_possible" cpu value
and sizes arrays by it.
Fix by setting the driver's value to the value of the last cpu id bit set
in the possible_mask - plus 1. Thus cpu_map will be sized to allow access
by any cpu id possible.
Link: https://lore.kernel.org/r/20191121175556.18953-1-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The crash handler calls hv_synic_cleanup() to shutdown the
Hyper-V synthetic interrupt controller. But if the CPU
that calls hv_synic_cleanup() has a VMbus channel interrupt
assigned to it (which is likely the case in smaller VM sizes),
hv_synic_cleanup() returns an error and the synthetic
interrupt controller isn't shutdown. While the lack of
being shutdown hasn't caused a known problem, it still
should be fixed for highest reliability.
So directly call hv_synic_disable_regs() instead of
hv_synic_cleanup(), which ensures that the synic is always
shutdown.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
At a slight footprint cost (24 vs 32 bytes), mutexes are more optimal
than semaphores; it's also a nicer interface for mutual exclusion,
which is why they are encouraged over binary semaphores, when possible.
Replace the hyperv_mmio_lock, its semantics implies traditional lock
ownership; that is, the lock owner is the same for both lock/unlock
operations. Therefore it is safe to convert.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
During the suspend process and resume process, if there is any mouse
event, there is a small chance the suspend and the resume process can be
aborted because of mousevsc_on_receive() -> pm_wakeup_hard_event().
This behavior can be avoided by disabling the Hyper-V mouse device as
a wakeup source:
echo disabled > /sys/bus/vmbus/drivers/hid_hyperv/XXX/power/wakeup
(XXX is the device's GUID).
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
When hibernation is enabled, we must ignore the balloon up/down and
hot-add requests from the host, if any.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The API will be used by the hv_balloon and hv_vmbus drivers.
Balloon up/down and hot-add of memory must not be active if the user
wants the Linux VM to support hibernation, because they are incompatible
with hibernation according to Hyper-V team, e.g. upon suspend the
balloon VSP doesn't save any info about the ballooned-out pages (if any);
so, after Linux resumes, Linux balloon VSC expects that the VSP will
return the pages if Linux is under memory pressure, but the VSP will
never do that, since the VSP thinks it never stole the pages from the VM.
So, if the user wants Linux VM to support hibernation, Linux must forbid
balloon up/down and hot-add, and the only functionality of the balloon VSC
driver is reporting the VM's memory pressure to the host.
Ideally, when Linux detects that the user wants it to support hibernation,
the balloon VSC should tell the VSP that it does not support ballooning
and hot-add. However, the current version of the VSP requires the VSC
should support these capabilities, otherwise the capability negotiation
fails and the VSC can not load at all, so with the later changes to the
VSC driver, Linux VM still reports to the VSP that the VSC supports these
capabilities, but the VSC ignores the VSP's requests of balloon up/down
and hot add, and reports an error to the VSP, when applicable. BTW, in
the future the balloon VSP driver will allow the VSC to not support the
capabilities of balloon up/down and hot add.
The ACPI S4 state is not a must for hibernation to work, because Linux is
able to hibernate as long as the system can shut down. However in practice
we decide to artificially use the presence of the virtual ACPI S4 state as
an indicator of the user's intent of using hibernation, because Linux VM
must find a way to know if the user wants to use the hibernation feature
or not.
By default, Hyper-V does not enable the virtual ACPI S4 state; on recent
Hyper-V hosts (e.g. RS5, 19H1), the administrator is able to enable the
state for a VM by WMI commands.
Once all the vmbus and VSC patches for the hibernation feature are
accepted, an extra patch will be submitted to forbid hibernation if the
virtual ACPI S4 state is absent, i.e. hv_is_hibernation_supported() is
false.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hyper-V assumes page size to be 4K. This might not be the case for
ARM64 architecture. Hence use hyper-v specific page size and page
shift definitions to avoid conflicts between different host and guest
page sizes on ARM64.
Also, remove some old and incorrect comments and redefine ballooning
granularities to handle larger page sizes correctly.
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hyper-V assumes page size to be 4K. This might not be the case for ARM64
architecture. Hence use hyper-v page size and page allocation function
to avoid conflicts between different host and guest page size on ARM64.
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hyper-V assumes page size to be 4K. While this assumption holds true on
x86 architecture, it might not be true for ARM64 architecture. Hence
define hyper-v specific function to allocate a zeroed page which can
have a different implementation on ARM64 architecture to handle the
conflict between hyper-v's assumed page size and actual guest page size.
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
VMbus ring buffers are sized based on the 4K page size used by
Hyper-V. The Linux guest page size may not be 4K on all architectures
so use the Hyper-V page size to specify the ring buffer size.
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The recv_buffer is used to retrieve data from the VMbus ring buffer.
VMbus ring buffers are sized based on the guest page size which
Hyper-V assumes to be 4KB. But it may be different on some
architectures. So use the Hyper-V page size to allocate the
recv_buffer and set the maximum size to receive.
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This is a userspace tool to drive the testing. Currently it supports
introducing user specified delay in the host to guest communication
path on a per-channel basis.
Signed-off-by: Branden Bonaby <brandonbonaby94@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Introduce user specified latency in the packet reception path
By exposing the test parameters as part of the debugfs channel
attributes. We will control the testing state via these attributes.
Signed-off-by: Branden Bonaby <brandonbonaby94@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Without deferred IO support, hyperv_fb driver informs the host to refresh
the entire guest frame buffer at fixed rate, e.g. at 20Hz, no matter there
is screen update or not. This patch supports deferred IO for screens in
graphics mode and also enables the frame buffer on-demand refresh. The
highest refresh rate is still set at 20Hz.
Currently Hyper-V only takes a physical address from guest as the starting
address of frame buffer. This implies the guest must allocate contiguous
physical memory for frame buffer. In addition, Hyper-V Gen 2 VMs only
accept address from MMIO region as frame buffer address. Due to these
limitations on Hyper-V host, we keep a shadow copy of frame buffer
in the guest. This means one more copy of the dirty rectangle inside
guest when doing the on-demand refresh. This can be optimized in the
future with help from host. For now the host performance gain from deferred
IO outweighs the shadow copy impact in the guest.
Signed-off-by: Wei Hu <weh@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Beginning from Windows 10 RS5+, VM screen resolution is obtained from host.
The "video=hyperv_fb" boot time option is not needed, but still can be
used to overwrite what the host specifies. The VM resolution on the host
could be set by executing the powershell "set-vmvideo" command.
Signed-off-by: Iouri Tarassov <iourit@microsoft.com>
Signed-off-by: Wei Hu <weh@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The existing netvsc_detach() and netvsc_attach() APIs make it easy to
implement the suspend/resume callbacks.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch depends on the vmbus side change of the definition of
struct hv_driver.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
When we're in storvsc_suspend(), we're sure the SCSI layer has quiesced the
scsi device by scsi_bus_suspend() -> ... -> scsi_device_quiesce(), so the
low level SCSI adapter driver only needs to suspend/resume its own state.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, Linux guests negotiate the VMBus version with Hyper-V
and use the highest available VMBus version they can connect to.
This has some drawbacks: by using the highest available version,
certain code paths are never executed and can not be tested when
the guest runs on the newest host.
Add the module parameter "max_version", to upper-bound the VMBus
versions guests can negotiate.
Suggested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hyper-V has added VMBus protocol versions 5.1 and 5.2 in recent release
versions. Allow Linux guests to negotiate these new protocol versions
on versions of Hyper-V that support them. While on this, also allow
guests to negotiate the VMBus protocol version 4.1 (which was missing).
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The technique used to get the next VMBus version seems increasisly
clumsy as the number of VMBus versions increases. Performance is
not a concern since this is only done once during system boot; it's
just that we'll end up with more lines of code than is really needed.
As an alternative, introduce a table with the version numbers listed
in order (from the most recent to the oldest). vmbus_connect() loops
through the versions listed in the table until it gets an accepted
connection or gets to the end of the table (invalid version).
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
- Fix kernel oops on dumb_create ioctl on no crtc situation
- Fix bad ugly colored flash on VLV/CHV related to gamma LUT update
- Fix unity of the frequencies reported on PMU
- Fix kernel oops on set_page_dirty using better locks around it
- Protect the request pointer with RCU to prevent it being freed while we might need still
- Make pool objects read-only
- Restore physical addresses for fb_map to avoid corrupted page table
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191121165339.GA23920@intel.com
Commit d3c6161956 ("ARM: 8788/1: ftrace: remove old mcount support")
removed the old mcount support, but forget to remove these three
declarations. This patch removes them.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add sysfs attributes to Endpoints and other Upstream Ports to control ASPM,
Clock PM, and L1 PM Substates. The new attributes are:
/sys/devices/pci*/.../link/clkpm
/sys/devices/pci*/.../link/l0s_aspm
/sys/devices/pci*/.../link/l1_aspm
/sys/devices/pci*/.../link/l1_1_aspm
/sys/devices/pci*/.../link/l1_2_aspm
/sys/devices/pci*/.../link/l1_1_pcipm
/sys/devices/pci*/.../link/l1_2_pcipm
An attribute is only visible if both ends of the Link leading to the device
support the state. Writing y/1/on to the file enables the state; n/0/off
disables it.
These attributes can be used to tune the power/performance tradeoff for
individual devices.
[bhelgaas: commit log, rename directory to "link"]
Link: https://lore.kernel.org/r/b1c83f8a-9bf6-eac5-82d0-cf5b90128fbf@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Paolo Abeni says:
====================
net: introduce and use route hint
This series leverages the listification infrastructure to avoid
unnecessary route lookup on ingress packets. In absence of custom rules,
packets with equal daddr will usually land on the same dst.
When processing packet bursts (lists) we can easily reference the previous
dst entry. When we hit the 'same destination' condition we can avoid the
route lookup, coping the already available dst.
Detailed performance numbers are available in the individual commit
messages.
v3 -> v4:
- move helpers to their own patches (Eric D.)
- enable hints for SUBTREE builds (David A.)
- re-enable hints for ipv4 forward (David A.)
v2 -> v3:
- use fib*_has_custom_rules() helpers (David A.)
- add ip*_extract_route_hint() helper (Edward C.)
- use prev skb as hint instead of copying data (Willem )
v1 -> v2:
- fix build issue with !CONFIG_IP*_MULTIPLE_TABLES
- fix potential race in ip6_list_rcv_finish()
====================
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is alike the previous change, with some additional ipv4 specific
quirk. Even when using the route hint we still have to do perform
additional per packet checks about source address validity: a new
helper is added to wrap them.
Hints are explicitly disabled if the destination is a local broadcast,
that keeps the code simple and local broadcast are a slower path anyway.
UDP flood performances vs recvmmsg() receiver:
vanilla patched delta
Kpps Kpps %
1683 1871 +11
In the worst case scenario - each packet has a different
destination address - the performance delta is within noise
range.
v3 -> v4:
- re-enable hints for forward
v2 -> v3:
- really fix build (sic) and hint usage check
- use fib4_has_custom_rules() helpers (David A.)
- add ip_extract_route_hint() helper (Edward C.)
- use prev skb as hint instead of copying data (Willem)
v1 -> v2:
- fix build issue with !CONFIG_IP_MULTIPLE_TABLES
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When doing RX batch packet processing, we currently always repeat
the route lookup for each ingress packet. When no custom rules are
in place, and there aren't routes depending on source addresses,
we know that packets with the same destination address will use
the same dst.
This change tries to avoid per packet route lookup caching
the destination address of the latest successful lookup, and
reusing it for the next packet when the above conditions are
in place. Ingress traffic for most servers should fit.
The measured performance delta under UDP flood vs a recvmmsg
receiver is as follow:
vanilla patched delta
Kpps Kpps %
1431 1674 +17
In the worst-case scenario - each packet has a different
destination address - the performance delta is within noise
range.
v3 -> v4:
- support hints for SUBFLOW build, too (David A.)
- several style fixes (Eric)
v2 -> v3:
- add fib6_has_custom_rules() helpers (David A.)
- add ip6_extract_route_hint() helper (Edward C.)
- use hint directly in ip6_list_rcv_finish() (Willem)
v1 -> v2:
- fix build issue with !CONFIG_IPV6_MULTIPLE_TABLES
- fix potential race when fib6_has_custom_rules is set
while processing a packet batch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use a per namespace counter, increment it on successful creation
of any route using the source address, decrement it on deletion
of such routes.
This allows us to check easily if the routing decision in the
current namespace depends on the packet source. Will be used
by the next patch.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yangbo Lu says:
====================
Support PTP clock and hardware timestamping for DSA Felix driver
This patch-set is to support PTP clock and hardware timestamping
for DSA Felix driver. Some functions in ocelot.c/ocelot_board.c
driver were reworked/exported, so that DSA Felix driver was able
to reuse them as much as possible.
On TX path, timestamping works on packet which requires timestamp.
The injection header will be configured accordingly, and skb clone
requires timestamp will be added into a list. The TX timestamp
is final handled in threaded interrupt handler when PTP timestamp
FIFO is ready.
On RX path, timestamping is always working. The RX timestamp could
be got from extraction header.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to reuse ocelot functions as possible to enable PTP
clock and to support hardware timestamping on Felix.
On TX path, timestamping works on packet which requires timestamp.
The injection header will be configured accordingly, and skb clone
requires timestamp will be added into a list. The TX timestamp
is final handled in threaded interrupt handler when PTP timestamp
FIFO is ready.
On RX path, timestamping is always working. The RX timestamp could
be got from extraction header.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
