Under DCN32/321 we identified some code paths that DC never executes.
This commit removes those unused codes to avoid distractions when
debugging issues.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
when dynamic odm was turned on, there is also logic to halve the pixelclk
this still turned on when we avoided odm in the case of odd h_total timings
how:
block the pixel clk mechanism also in the case of odd h_total timings
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[how]
Large deltas for periodic interrupts could result in the interrupt not
being programmed properly and thus not firing.
[why]
Add proper wrap-around support for calculating VUPDATE and VLINE
positions.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Clocks are updating based on the incoming context's support, however the new
compbuf size is not programmed prior to udpating clocks, which can result in
P-State hangs.
[HOW?]
Increase compbuf size prior to updating clocks.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN315 has to always allow pstate change or SMU will hang. This
workaround achieves this by applying a low pstate change latency
to be used when pstate is calculated to be unsupported. This lower
latency only accounts for memory retraining; a previous change
handles locking in the highest available pstate allowing us to minimize
required latency hiding to only account for memory retraining.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Now dynamic ODM will now be disabled when MPO is required safe
transitions to avoid underflow, but we are triggering the way of
minimal transition too often. Commit state of dc with no check
will do pipeline setup which may re-initialize the component with no
need such as audio.
[HOW]
Just do the minimal transition when all of pipes are in use, otherwise
return true to skip.
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- For SubVP pipe split case we need to use a minimial transition
when opening MPO video since we are transitioning from 4 pipes
to 3 pipes where an OPP for a previous MPCC will change
- Also save and restore mall config when doing fast_validate in case
there was a shallow copy of the dc->current_state
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Analyzer shows incorrect V freq in MSA for some large timing.
[how]
Cast an 32 bit integer to uint64_t before multiplication to avoid
integer overflow for a very large timing.
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
When enabling phantom pipe on a pipe that was previously
using immediate flip, we have to disable GSL or this will
prevent the update from taking place right away on the phantom
pipe when we enable it in FW
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DML does not take the fact that dcn315 does not have enough detile
buffer to max all pipes. This change adds a workaround to apply
the same logic DC does when calculating detile buffer size in DML.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
In some cases, DCFCLK hardmin requests are not acknowledged by SMU as
the requested clock does not have a compatible ratio with current FCLK,
and it cannot be changed as FCLK P-state is not allowed.
[HOW?]
Allow FCLK p-state change prior to changing DCFCLK hardmin.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why?]
Currently SubVP programming is only done in commit_planes_for_stream, as
it was expected only this call would add/remove planes from a
display.
[How?]
Add SubVP programming to dc_commit_state_no_check.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_bo_kmap() returns error when fails to map buffer object. Add the
error check and propagate the error.
Signed-off-by: Li Zhong <floridsleeves@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enc314_stream_encoder_dp_blank is only used in dcn314_dio_stream_encoder.c now,
change it to static.
Fixes: c55bf690fe ("drm/amd/display: Add explicit FIFO disable for DP blank")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
We only want to commit the SubVP config to DMCUB
after the main and phantom pipe programming has
completed. Commiting the state early can cause
issues such as P-State being allowed by the HW
early which causes the SubVP state machine to
go into a bad state
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The commit that added the new get_random_{u8,u16}() functions neglected
to update the code that clears the batches when bringing up a new CPU.
It also forgot a few comments and helper defines, so add those in too.
Fixes: 585cd5fe9f ("random: add 8-bit and 16-bit batches")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The function hooks (ftrace) is a completely different subsystem from the
general tracing. It manages how to attach callbacks to most functions in
the kernel. It is also used by live kernel patching. It really is not part
of tracing, although tracing uses it.
Create a separate entry for FUNCTION HOOKS (FTRACE) to be separate from
tracing itself in the MAINTAINERS file.
Perhaps it should be moved out of the kernel/trace directory, but that's
for another time.
Link: https://lkml.kernel.org/r/20221006144439.459272364@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The test is designed with a data structure with 64-byte alignment, it
has two fields "data1" and "data2", and other fields are reserved.
Using the "perf mem" command, we can record and report memory samples
for a self-contained workload with 1 second duration. If no samples are
obtained for the data structure "buf1", it reports failure; and by
checking the offset in structure "buf1", if the memory samples aren't
for the "data1" and "data2" fields, it means wrong data symbol parsing
and returns failure.
Committer testing:
[root@quaco ~]# grep -m1 "model name" /proc/cpuinfo
model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
[root@quaco ~]#
[root@quaco ~]# perf test -v "data symbol"
104: Test data symbol :
--- start ---
test child forked, pid 192318
Compiling test program...
Recording workload...
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.389 MB /tmp/__perf_test.perf.data.LIuQl (5570 samples) ]
Cleaning up files...
test child finished with 0
---- end ----
Test data symbol: Ok
[root@quaco ~]#
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20221006101039.47870-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using syscall wrappers the __SYSCALL_DEFINEx() and related macros
add a "__powerpc_" prefix to all syscall entry points.
So for example sys_mmap becomes __powerpc_sys_mmap.
This risks breaking workflows and tools that expect the old naming
scheme. At a minimum setting a breakpoint on eg. sys_mmap with gdb no
longer works.
There seems to be no compelling reason to add the "__powerpc_" prefix,
other than that it follows what some other arches do (x86, arm64, s390).
But unlike other arches powerpc doesn't always enable syscall wrappers,
so the syscall entry points can change name depending on CONFIG options.
For those reasons drop the "__powerpc_" prefix, reverting to the
existing naming.
Doing so reveals two prototypes in signal.h that have the incorrect type
when syscall wrappers are enabled. There are already prototypes for both
functions in syscalls.h, so drop the ones from signal.h.
Fixes: 7e92e01b72 ("powerpc: Provide syscall wrapper")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221006135940.1223988-1-mpe@ellerman.id.au
If the layout is recalled or revoked, we want to cancel I/O as quickly
as possible so that we can return the layout.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Allow the caller to force a disconnection of the RPC client so that we
can clear any pending requests that are buffered in the socket.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add the helper rpc_cancel_tasks(), which uses a caller-defined selection
function to define a set of in-flight RPC calls to cancel. This is
mainly intended for pNFS drivers which are subject to a layout recall,
and which may therefore want to cancel all pending I/O using that layout
in order to redrive it after the layout recall has been satisfied.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure that we immediately call rpc_exit_task() after waking up, and
that the tk_rpc_status cannot get clobbered by some other function.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This removes the second use of the sched_core_mask temporary mask.
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Following the recent introduction of for_each_andnot(), add some tests to
ensure for_each_cpu_and(not) results in the same as iterating over the
result of cpumask_and(not)().
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
for_each_cpu_and() is very convenient as it saves having to allocate a
temporary cpumask to store the result of cpumask_and(). The same issue
applies to cpumask_andnot() which doesn't actually need temporary storage
for iteration purposes.
Following what has been done for for_each_cpu_and(), introduce
for_each_cpu_andnot().
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
In preparation of introducing for_each_cpu_andnot(), add a variant of
find_next_bit() that negate the bits in @addr2 when ANDing them with the
bits in @addr1.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Since commit ae626eb973 ("ARM/dma-mapping: use dma-direct
unconditionally") only the dma_coherent flag in struct device is used,
so remove the now write only flag in struct dev_archdata.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Commit ae626eb973 ("ARM/dma-mapping: use dma-direct unconditionally")
caused a regression on the mvebu platform, wherein devices that are
dma-coherent are marked as dma-noncoherent, because although
mvebu_hwcc_notifier() after that commit still marks then as coherent,
the arm_coherent_dma_ops() function, which is called later, overwrites
this setting, since it is being called from drivers/of/device.c with
coherency parameter determined by of_dma_is_coherent(), and the
device-trees do not declare the 'dma-coherent' property.
Fix this by defaulting never clearing the dma_coherent flag in
arm_coherent_dma_ops().
Fixes: ae626eb973 ("ARM/dma-mapping: use dma-direct unconditionally")
Reported-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Marek Behún <kabel@kernel.org>
Some SD-cards from Sandisk that are SDA-6.0 compliant reports they supports
discard, while they actually don't. This might cause mk2fs to fail while
trying to format the card and revert it to a read-only mode.
To fix this problem, let's add a card quirk (MMC_QUIRK_BROKEN_SD_DISCARD)
to indicate that we shall fall-back to use the legacy erase command
instead.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220928095744.16455-1-avri.altman@wdc.com
[Ulf: Updated the commit message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
