We've switched all users to nvmem_get_mac_address(). Remove the now
dead code.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We already have of_get_nvmem_mac_address() but some non-DT systems want
to read the MAC address from NVMEM too. Implement a generalized routine
that takes struct device as argument.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some users of rhashtables might need to move an object from one table
to another - this appears to be the reason for the incomplete usage
of NULLS markers.
To support these, we store a unique NULLS_MARKER at the end of
each chain, and when a search fails to find a match, we check
if the NULLS marker found was the expected one. If not, the search
may not have examined all objects in the target bucket, so it is
repeated.
The unique NULLS_MARKER is derived from the address of the
head of the chain. As this cannot be derived at load-time the
static rhnull in rht_bucket_nested() needs to be initialised
at run time.
Any caller of a lookup function must still be prepared for the
possibility that the object returned is in a different table - it
might have been there for some time.
Note that this does NOT provide support for other uses of
NULLS_MARKERs such as allocating with SLAB_TYPESAFE_BY_RCU or changing
the key of an object and re-inserting it in the same table.
These could only be done safely if new objects were inserted
at the *start* of a hash chain, and that is not currently the case.
Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Existing functions to retreive the l3mdev of a device did not walk the
master chain to find the upper master. This patch adds a function to
find the l3mdev, even indirect through e.g. a bridge:
+----------+
| |
| vrf-blue |
| |
+----+-----+
|
|
+----+-----+
| |
| br-blue |
| |
+----+-----+
|
|
+----+-----+
| |
| eth0 |
| |
+----------+
This will properly resolve the l3mdev of eth0 to vrf-blue.
Signed-off-by: Alexis Bauvin <abauvin@scaleway.com>
Reviewed-by: Amine Kherbouche <akherbouche@scaleway.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Amine Kherbouche <akherbouche@scaleway.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
UDP tunnel sockets are always opened unbound to a specific device. This
patch allow the socket to be bound on a custom device, which
incidentally makes UDP tunnels VRF-aware if binding to an l3mdev.
Signed-off-by: Alexis Bauvin <abauvin@scaleway.com>
Reviewed-by: Amine Kherbouche <akherbouche@scaleway.com>
Tested-by: Amine Kherbouche <akherbouche@scaleway.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many drivers load the device's firmware image during the initialization
flow either from the flash or from the disk. Currently this option is not
controlled by the user and the driver decides from where to load the
firmware image.
'fw_load_policy' gives the ability to control this option which allows the
user to choose between different loading policies supported by the driver.
This parameter can be useful while testing and/or debugging the device. For
example, testing a firmware bug fix.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the pxa architecture and all its related drivers do not rely anymore
on the filter function, thanks to the slave map conversion, make
pxad_filter_fn() static, and remove it from the global namespace.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vinod Koul <vkoul@kernel.org>
Qualcomm ARM Based Driver Updates for v4.21
* Fix llcc license, includes, and error checks
* Remove use of memcpy in cmd-db and fix API breakage
* Add QCS404 compatible to SMD-RPM
* Minor fixes for QMI
* Add irq clear handling in QCOM Geni SE during init
* tag 'qcom-drivers-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
drm: msm: Check cmd_db_read_aux_data() for failure
soc: qcom: smd-rpm: Add QCS404 compatible
soc: qcom: llcc-slice: Remove duplicated include from llcc-slice.c
soc: qcom: cmd-db: Stop memcpy()ing in cmd_db_read_aux_data()
soc: qcom: cmd-db: Remove memcpy()ing from cmd_db_get_header()
soc: qcom: Drop help text for QCOM_QMI_HELPERS
soc: qcom: qmi_interface: Limit txn ids to U16_MAX
soc: qcom: llcc-slice: Add error checks for API functions
soc: qcom/llcc: add MODULE_LICENSE tag
soc: qcom: Add irq clear handling during SE init
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes
for 4.21, please pull the following changes:
- James fixes the firmware interface after a commit changed the use of
VLA and broke large transfers
- Stefan adds a timeout check for Raspberry Pi firmware transactions and
updates a bunch of SoC/firmware files to use SPDX tags
- Wolfram switches the GISB bus arbiter to use dev_get_drvdata()
- Yangtao provides a fix for a reference leak due to a call to
of_find_node_by_path()
- Florian fixes the CPU re-entry point out of S3 suspend with kernels
built in Thumb2 mode
* tag 'arm-soc/for-4.21/drivers' of https://github.com/Broadcom/stblinux:
soc: bcm: brcmstb: Don't leak device tree node reference
firmware: raspberrypi: Switch to SPDX identifier
firmware: raspberrypi: Fix firmware calls with large buffers
soc: bcm: Switch raspberrypi-power to SPDX identifier
firmware: raspberrypi: Define timeout for transactions
bus: brcmstb_gisb: simplify getting .driver_data
soc: bcm: brcmstb: Fix re-entry point with a THUMB2_KERNEL
Signed-off-by: Olof Johansson <olof@lixom.net>
The missing indentation on the "Return" sections for bpf_map_pop_elem()
and bpf_map_peek_elem() helpers break RST and man pages generation. This
patch fixes them, and moves the description of those two helpers towards
the end of the list (even though they are somehow related to the three
first helpers for maps, the man page explicitly states that the helpers
are sorted in chronological order).
While at it, bring other minor formatting edits for eBPF helpers
documentation: mostly blank lines removal, RST formatting, or other
small nits for consistency.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The pkt_len field in qdisc_skb_cb stores the skb length as it will
appear on the wire after segmentation. For byte accounting, this value
is more accurate than skb->len. It is computed on entry to the TC
layer, so only valid there.
Allow read access to this field from BPF tc classifier and action
programs. The implementation is analogous to tc_classid, aside from
restricting to read access.
To distinguish it from skb->len and self-describe export as wire_len.
Changes v1->v2
- Rename pkt_len to wire_len
Signed-off-by: Petar Penkov <ppenkov@google.com>
Signed-off-by: Vlad Dumitrescu <vladum@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When vb2_buffer_done is called the buffer is unbound from the
request and put. The media_request_object_put also 'put's the
request reference. If the application has already closed the
request fd, then that means that the request reference at that
point goes to 0 and the whole request is released.
This means that the control handler associated with the request is
also freed and that causes this kernel oops:
[174705.995401] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908
[174705.995411] in_atomic(): 1, irqs_disabled(): 1, pid: 28071, name: vivid-000-vid-o
[174705.995416] 2 locks held by vivid-000-vid-o/28071:
[174705.995420] #0: 000000001ea3a232 (&dev->mutex#3){....}, at: vivid_thread_vid_out+0x3f5/0x550 [vivid]
[174705.995447] #1: 00000000e30a0d1e (&(&q->done_lock)->rlock){....}, at: vb2_buffer_done+0x92/0x1d0 [videobuf2_common]
[174705.995460] Preemption disabled at:
[174705.995461] [<0000000000000000>] (null)
[174705.995472] CPU: 11 PID: 28071 Comm: vivid-000-vid-o Tainted: G W 4.20.0-rc1-test-no #88
[174705.995476] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[174705.995481] Call Trace:
[174705.995500] dump_stack+0x46/0x60
[174705.995512] ___might_sleep.cold.79+0xe1/0xf1
[174705.995523] __mutex_lock+0x50/0x8f0
[174705.995531] ? find_held_lock+0x2d/0x90
[174705.995536] ? find_held_lock+0x2d/0x90
[174705.995542] ? find_held_lock+0x2d/0x90
[174705.995564] ? v4l2_ctrl_handler_free.part.13+0x44/0x1d0 [videodev]
[174705.995576] v4l2_ctrl_handler_free.part.13+0x44/0x1d0 [videodev]
[174705.995590] v4l2_ctrl_request_release+0x1c/0x30 [videodev]
[174705.995600] media_request_clean+0x64/0xe0 [media]
[174705.995609] media_request_release+0x19/0x40 [media]
[174705.995617] vb2_buffer_done+0xef/0x1d0 [videobuf2_common]
[174705.995630] vivid_thread_vid_out+0x2c1/0x550 [vivid]
[174705.995645] ? vivid_stop_generating_vid_cap+0x1c0/0x1c0 [vivid]
[174705.995653] kthread+0x113/0x130
[174705.995659] ? kthread_park+0x80/0x80
[174705.995667] ret_from_fork+0x35/0x40
The vb2_buffer_done function can be called from interrupt context, so
anything that sleeps is not allowed.
The solution is to increment the request refcount when the buffer is
queued and decrement it when the buffer is dequeued. Releasing the
request is fine if that happens from VIDIOC_DQBUF.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add ability to track allocated ib_ucontext, which are limited
resource and worth to be visible by users.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adding CLK_FRAC_DIVIDER_ZERO_BASED flag to indicate the numerator and
denominator value in register are start from 0.
This can be used to support frac dividers like below:
Divider output clock = Divider input clock x [(frac +1) / (div +1)]
where frac/div in register is:
000b - Divide by 1.
001b - Divide by 2.
010b - Divide by 3.
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull media fixes from Mauro Carvalho Chehab:
- Revert a dt-bindings patch whose driver didn't make for 4.20
- fix a kernel oops at vicodec driver
- fix a frame overflow at gspca with was causing regressions on some
cameras, making them to not work
- use the proper type for wait_queue head
- make media request API compatible with 32-bit userspace on 64-bit
kernel
- fix a regression on Kernel 4.19 at dvb-pll
- don't use SPDX headers yet for GFDL
* tag 'media/v4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mediactl docs: Fix licensing message
media: dvb-pll: don't re-validate tuner frequencies
media: dvb-pll: fix tuner frequency ranges
media: Revert "media: dt-bindings: Document the Rockchip VPU bindings"
media: gspca: fix frame overflow error
media: vicodec: fix memchr() kernel oops
media: cedrus: add action item to the TODO
media: media-request: Add compat ioctl
media: Use wait_queue_head_t for media_request
SPDX-License-Identifier is used for the Xilinx Video IP and
related drivers.
[Added drivers/media/platform/xilinx/Kconfig]
[Added drivers/media/platform/xilinx/Makefile]
[Added include/dt-bindings/media/xilinx-vip.h]
Signed-off-by: Dhaval Shah <dhaval23031987@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add device tree bindings for Low Power Audio subsystem clock controller for
Qualcomm Technology Inc's SDM845 SoCs.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add flags for Octal mode I/O data transfer
Required for the SPI controller which can do the data transfer (TX/RX)
on 8 data lines e.g. NXP FlexSPI controller.
SPI_TX_OCTAL: transmit with 8 wires
SPI_RX_OCTAL: receive with 8 wires
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
All of the old arguments can be derived from the uverbs_attr_bundle
structure, so get rid of the redundant arguments. Most of the prior work
has been removing users of the arguments to allow this to be a simple
patch.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This creates a consistent way to access the two core buffers across write
and write_ex handlers.
Remove the open coded ucore conversion in the write/ex compatibility
handlers.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When performing single ended measurements with TSCADC, its recommended
to set negative input (SEL_INM_SWC_3_0) of ADC step to ADC's VREFN in the
corresponding STEP_CONFIGx register.
Also, the positive(SEL_RFP_SWC_2_0) and negative(SEL_RFM_SWC_1_0)
reference voltage for ADC step needs to be set to VREFP and VREFN
respectively in STEP_CONFIGx register.
Without these changes, there may be variation of as much as ~2% in the
ADC's digital output which is bad for precise measurement.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
vmbus_process_offer() mustn't call channel->sc_creation_callback()
directly for sub-channels, because sc_creation_callback() ->
vmbus_open() may never get the host's response to the
OPEN_CHANNEL message (the host may rescind a channel at any time,
e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind()
may not wake up the vmbus_open() as it's blocked due to a non-zero
vmbus_connection.offer_in_progress, and finally we have a deadlock.
The above is also true for primary channels, if the related device
drivers use sync probing mode by default.
And, usually the handling of primary channels and sub-channels can
depend on each other, so we should offload them to different
workqueues to avoid possible deadlock, e.g. in sync-probing mode,
NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() ->
rtnl_lock(), and causes deadlock: the former gets the rtnl_lock
and waits for all the sub-channels to appear, but the latter
can't get the rtnl_lock and this blocks the handling of sub-channels.
The patch can fix the multiple-NIC deadlock described above for
v3.x kernels (e.g. RHEL 7.x) which don't support async-probing
of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing
but don't enable async-probing for Hyper-V drivers (yet).
The patch can also fix the hang issue in sub-channel's handling described
above for all versions of kernels, including v4.19 and v4.20-rc4.
So actually the patch should be applied to all the existing kernels,
not only the kernels that have 8195b1396e.
Fixes: 8195b1396e ("hv_netvsc: fix deadlock on hotplug")
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The OCC is a device embedded on a POWER processor that collects and
aggregates sensor data from the processor and system. The OCC can
provide the raw sensor data as well as perform thermal and power
management on the system.
This driver provides an atomic communications channel between a service
processor (e.g. a BMC) and the OCC. The driver is dependent on the FSI
SBEFIFO driver to get hardware access through the SBE to the OCC SRAM.
Commands are issued to the SBE to send or fetch data to the SRAM.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Pull ARM SoC fixes from Olof Johansson:
"Volume is a little higher than usual due to a set of gpio fixes for
Davinci platforms that's been around a while, still seemed appropriate
to not hold off until next merge window.
Besides that it's the usual mix of minor fixes, mostly corrections of
small stuff in device trees.
Major stability-related one is the removal of a regulator from DT on
Rock960, since DVFS caused undervoltage. I expect it'll be restored
once they figure out the underlying issue"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
MAINTAINERS: Remove unused Qualcomm SoC mailing list
ARM: davinci: dm644x: set the GPIO base to 0
ARM: davinci: da830: set the GPIO base to 0
ARM: davinci: dm355: set the GPIO base to 0
ARM: davinci: dm646x: set the GPIO base to 0
ARM: davinci: dm365: set the GPIO base to 0
ARM: davinci: da850: set the GPIO base to 0
gpio: davinci: restore a way to manually specify the GPIO base
ARM: davinci: dm644x: define gpio interrupts as separate resources
ARM: davinci: dm355: define gpio interrupts as separate resources
ARM: davinci: dm646x: define gpio interrupts as separate resources
ARM: davinci: dm365: define gpio interrupts as separate resources
ARM: davinci: da8xx: define gpio interrupts as separate resources
ARM: dts: at91: sama5d2: use the divided clock for SMC
ARM: dts: imx51-zii-rdu1: Remove EEPROM node
ARM: dts: rockchip: Remove @0 from the veyron memory node
arm64: dts: rockchip: Fix PCIe reset polarity for rk3399-puma-haikou.
arm64: dts: qcom: msm8998: Reserve gpio ranges on MTP
arm64: dts: sdm845-mtp: Reserve reserved gpios
arm64: dts: ti: k3-am654: Fix wakeup_uart reg address
...
Pull xen fixes from Juergen Gross:
- A revert of a previous commit as it is no longer necessary and has
shown to cause problems in some memory hotplug cases.
- Some small fixes and a minor cleanup.
- A patch for adding better diagnostic data in a very rare failure
case.
* tag 'for-linus-4.20a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
pvcalls-front: fixes incorrect error handling
Revert "xen/balloon: Mark unallocated host memory as UNUSABLE"
xen: xlate_mmu: add missing header to fix 'W=1' warning
xen/x86: add diagnostic printout to xen_mc_flush() in case of error
x86/xen: cleanup includes in arch/x86/xen/spinlock.c
If we retransmit an RPC request, we currently end up clobbering the
value of req->rq_rcv_buf.bvec that was allocated by the initial call to
xprt_request_prepare(req).
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When allocating a new partition mtd subsystem runs internal tests in the
allocate_partition(). They may result in modifying specified flags (e.g.
dropping some /features/ like write access).
Those constraints don't have to be necessary true for subpartitions. It
may happen parent partition isn't block aligned (effectively disabling
write access) while subpartition may fit blocks nicely. In such case all
checks should be run again (starting with original flags value).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
mtd_oobavail() returns either mtd->oovabail or mtd->oobsize. Both
values are unsigned 32-bit entities, so there is no reason to pretend
returning a signed one.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
bug.2018.11.12a: Get rid of BUG_ON() and friends
consolidate.2018.12.01a: Continued RCU flavor-consolidation cleanup
doc.2018.11.12a: Documentation updates
fixes.2018.11.12a: Miscellaneous fixes
initrd.2018.11.08b: Automate creation of rcutorture initrd
sil.2018.11.12a: Remove more spin_unlock_wait() calls
Now that call_rcu()'s callback is not invoked until after bh-disable and
preempt-disable regions of code have completed (in addition to explicitly
marked RCU read-side critical sections), call_rcu() can be used in place
of call_rcu_bh() and call_rcu_sched(). This commit therefore removes
these two API members from the callback_head structure's header comment.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Now that synchronize_rcu() waits for preempt-disable regions of code
as well as RCU read-side critical sections, synchronize_sched() can be
replaced by synchronize_rcu(). This commit therefore makes this change,
even though it is but a comment.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: Tejun Heo <tj@kernel.org>
Pull STIBP fallout fixes from Thomas Gleixner:
"The performance destruction department finally got it's act together
and came up with a cure for the STIPB regression:
- Provide a command line option to control the spectre v2 user space
mitigations. Default is either seccomp or prctl (if seccomp is
disabled in Kconfig). prctl allows mitigation opt-in, seccomp
enables the migitation for sandboxed processes.
- Rework the code to handle the conditional STIBP/IBPB control and
remove the now unused ptrace_may_access_sched() optimization
attempt
- Disable STIBP automatically when SMT is disabled
- Optimize the switch_to() logic to avoid MSR writes and invocations
of __switch_to_xtra().
- Make the asynchronous speculation TIF updates synchronous to
prevent stale mitigation state.
As a general cleanup this also makes retpoline directly depend on
compiler support and removes the 'minimal retpoline' option which just
pretended to provide some form of security while providing none"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
x86/speculation: Provide IBPB always command line options
x86/speculation: Add seccomp Spectre v2 user space protection mode
x86/speculation: Enable prctl mode for spectre_v2_user
x86/speculation: Add prctl() control for indirect branch speculation
x86/speculation: Prepare arch_smt_update() for PRCTL mode
x86/speculation: Prevent stale SPEC_CTRL msr content
x86/speculation: Split out TIF update
ptrace: Remove unused ptrace_may_access_sched() and MODE_IBRS
x86/speculation: Prepare for conditional IBPB in switch_mm()
x86/speculation: Avoid __switch_to_xtra() calls
x86/process: Consolidate and simplify switch_to_xtra() code
x86/speculation: Prepare for per task indirect branch speculation control
x86/speculation: Add command line control for indirect branch speculation
x86/speculation: Unify conditional spectre v2 print functions
x86/speculataion: Mark command line parser data __initdata
x86/speculation: Mark string arrays const correctly
x86/speculation: Reorder the spec_v2 code
x86/l1tf: Show actual SMT state
x86/speculation: Rework SMT state change
sched/smt: Expose sched_smt_present static key
...
The arm64 codebase to implement coherent dma allocation for architectures
with non-coherent DMA is a good start for a generic implementation, given
that is uses the generic remap helpers, provides the atomic pool for
allocations that can't sleep and still is realtively simple and well
tested. Move it to kernel/dma and allow architectures to opt into it
using a config symbol. Architectures just need to provide a new
arch_dma_prep_coherent helper to writeback an invalidate the caches
for any memory that gets remapped for uncached access.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Some architectures support remapping highmem into DMA coherent
allocations. To use the common code for them we need variants of
dma_direct_{alloc,free}_pages that do not use kernel virtual addresses.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
My main motivation of this commit is to clean up scripts/Kbuild.include
and scripts/Makefile.build.
Currently, CONFIG_TRIM_UNUSED_KSYMS works with a tricky gimmick;
possibly exported symbols are detected by letting $(CPP) replace
EXPORT_SYMBOL* with a special string '=== __KSYM_*===', which is
post-processed by sed, and passed to fixdep. The extra preprocessing
is costly, and hacking cmd_and_fixdep is ugly.
I came up with a new way to find exported symbols; insert a dummy
symbol __ksym_marker_* to each potentially exported symbol. Those
dummy symbols are picked up by $(NM), post-processed by sed, then
appended to .*.cmd files. I collected the post-process part to a
new shell script scripts/gen_ksymdeps.sh for readability. The dummy
symbols are put into the .discard.* section so that the linker
script rips them off the final vmlinux or modules.
A nice side-effect is building with CONFIG_TRIM_UNUSED_KSYMS will
be much faster.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
This is a leftover from days where single-cpu systems were common:
Store last port used to resolve a clash to use it as a starting point when
the next conflict needs to be resolved.
When we have parallel attempt to connect to same address:port pair,
its likely that both cores end up computing the same "available" port,
as both use same starting port, and newly used ports won't become
visible to other cores until the conntrack gets confirmed later.
One of the cores then has to drop the packet at insertion time because
the chosen new tuple turns out to be in use after all.
Lets simplify this: remove port rover and use a pseudo-random starting
point.
Note that this doesn't make netfilter default to 'fully random' mode;
the 'rover' was only used if NAT could not reuse source port as-is.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
