Pull EFI fixes from Thomas Gleixner:
- Use explicitely sized type for the romimage pointer in the 32bit EFI
protocol struct so a 64bit kernel does not expand it to 64bit. Ditto
for the 64bit struct to avoid the reverse issue on 32bit kernels.
- Handle randomized tex offset correctly in the ARM64 EFI stub to avoid
unaligned data resulting in stack corruption and other hard to
diagnose wreckage.
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub/arm64: Handle randomized TEXT_OFFSET
efi: Avoid potential crashes, fix the 'struct efi_pci_io_protocol_32' definition for mixed mode
To improve eye diagram for PHYs on different boards of same SOC,
some parameters may need to be changed. Provide device tree
properties to override these from board specific device tree
files. While at it, replace "qcom,qusb2-v2-phy" with compatible
string for USB2 PHY on sdm845 which was earlier added for
sdm845 only.
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Fix the following sparse warnings:
CHECK drivers/iio/adc/stm32-dfsdm-adc.c
symbol 'stm32_dfsdm_get_buff_cb' was not declared. Should it be static?
symbol 'stm32_dfsdm_release_buff_cb' was not declared. Should it be static?
BTW, move interrupt.h to sort headers alphabetically.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Each driver implements physical port name generation by itself. However
as devlink has all needed info, it can easily do the job for all its
users. So implement this helper in devlink.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Devlink ports can have specific flavour according to the purpose of use.
This patch extend attrs_set so the driver can say which flavour port
has. Initial flavours are:
physical, cpu, dsa
User can query this to see right away what is the purpose of each port.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change existing setter for split port information into more generic
attrs setter. Alongside with that, allow to set port number and subport
number for split ports.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The set of APIs we provide has a few holes for coarse times, e.g. we
provide ktime_get_coarse_boottime() and ktime_get_boottime_ts64(),
but not the combination of the two.
This adds four new functions:
ktime_get_coarse_boottime_ts64()
ktime_get_boottime_seconds()
ktime_get_coarse_clocktai_ts64()
ktime_get_clocktai_seconds()
to fill in some of the missing pieces. I have missed only the
ktime_get_boottime_seconds() accessor in a few occasions in
the past, but it seems better to just provide all four together,
as there is very little cost to having them.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-6-arnd@arndb.de
I have run into a couple of drivers using current_kernel_time()
suffering from the y2038 problem, and they could be converted
to using ktime_t, but don't have interfaces that skip the nanosecond
calculation at the moment.
This introduces ktime_get_coarse_with_offset() as a simpler
variant of ktime_get_with_offset(), and adds wrappers for the
three time domains we support with the existing function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-5-arnd@arndb.de
The current_kernel_time64, get_monotonic_coarse64, getrawmonotonic64,
get_monotonic_boottime64 and timekeeping_clocktai64 interfaces have
rather inconsistent naming, and they differ in the calling conventions
by passing the output either by reference or as a return value.
Rename them to ktime_get_coarse_real_ts64, ktime_get_coarse_ts64,
ktime_get_raw_ts64, ktime_get_boottime_ts64 and ktime_get_clocktai_ts64
respectively, and provide the interfaces with macros or inline
functions as needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-4-arnd@arndb.de
At this point, we have converted most of the kernel to use timespec64
consistently in place of timespec, so it seems it's time to make
timespec64 the native structure and define timespec in terms of that
one on 64-bit architectures.
Starting with gcc-5, the compiler can completely optimize away the
timespec_to_timespec64 and timespec64_to_timespec functions on 64-bit
architectures. With older compilers, we introduce a couple of extra
copies of local variables, but those are easily avoided by using
the timespec64 based interfaces consistently, as we do in most of the
important code paths already.
The main upside of removing the hack is that printing the tv_sec
field of a timespec64 structure can now use the %lld format
string on all architectures without a cast to time64_t. Without
this patch, the field is a 'long' type and would have to be printed
using %ld on 64-bit architectures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-2-arnd@arndb.de
Add a new dma_map_ops implementation that uses dma-direct for the
address mapping of streaming mappings, and which requires arch-specific
implemenations of coherent allocate/free.
Architectures have to provide flushing helpers to ownership trasnfers
to the device and/or CPU, and can provide optional implementations of
the coherent mmap functionality, and the cache_flush routines for
non-coherent long term allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Many places in drivers/ file systems, error was handled in a common way
like below:
ret = (ret == -ENOMEM) ? VM_FAULT_OOM : VM_FAULT_SIGBUS;
vmf_error() will replace this and return vm_fault_t type err.
A lot of drivers and filesystems currently have a rather complex mapping
of errno-to-VM_FAULT code. We have been able to eliminate a lot of it
by just returning VM_FAULT codes directly from functions which are
called exclusively from the fault handling path.
Some functions can be called both from the fault handler and other
context which are expecting an errno, so they have to continue to return
an errno. Some users still need to choose different behaviour for
different errnos, but vmf_error() captures the essential error
translation that's common to all users, and those that need to handle
additional errors can handle them first.
Link: http://lkml.kernel.org/r/20180510174826.GA14268@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Document the userspace ABI with kerneldoc to provide some information on
how to use it.
v3:
- reword description of arrays and array lengths
v2:
- keep GEM object creation flags for ABI compatibility
- fix typo in struct drm_tegra_syncpt_incr kerneldoc
- fix typos in struct drm_tegra_submit kerneldoc
- reworded some descriptions as suggested
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This spinlock is superfluous, any call to drm_sched_entity_push_job
should already be under a lock together with matching drm_sched_job_init
to match the order of insertion into queue with job's fence seqence
number.
v2:
Improve patch description.
Add functions documentation describing the locking considerations
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tegra114 doesn't have SATA nor PCIe, but TRM seems erroneously document
them.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently sk_msg programs only have access to the raw data. However,
it is often useful when building policies to have the policies specific
to the socket endpoint. This allows using the socket tuple as input
into filters, etc.
This patch adds ctx access to the sock fields.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
A separate data structure exists for the DRM_TEGRA_CLOSE_CHANNEL IOCTL,
but it is currently unused. The IOCTL was using the data structure for
the DRM_TEGRA_OPEN_CHANNEL IOCTL.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The number of words and the offset in a gather don't need to be
explicitly sized, so make them unsigned int instead.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All other array variables use a plural, and this is the only one using
the *array suffix. This is confusing, so rename it for consistency.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rather than storing some identifier derived from the application
context that can't be used concretely anywhere, store a pointer to the
client directly so that accesses can be made directly through that
client object.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The job submission userspace ABI doesn't support this and there are no
plans to implement it, so all of this code is dead and can be removed.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sites may wish to provide additional metadata alongside files in order
to make more fine-grained security decisions[1]. The security of this is
enhanced if this metadata is protected, something that EVM makes
possible. However, the kernel cannot know about the set of extended
attributes that local admins may wish to protect, and hardcoding this
policy in the kernel makes it difficult to change over time and less
convenient for distributions to enable.
This patch adds a new /sys/kernel/security/integrity/evm/evm_xattrs node,
which can be read to obtain the current set of EVM-protected extended
attributes or written to in order to add new entries. Extending this list
will not change the validity of any existing signatures provided that the
file in question does not have any of the additional extended attributes -
missing xattrs are skipped when calculating the EVM hash.
[1] For instance, a package manager could install information about the
package uploader in an additional extended attribute. Local LSM policy
could then be associated with that extended attribute in order to
restrict the privileges available to packages from less trusted
uploaders.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Saeed Mahameed says:
====================
mlx5-updates-2018-05-17
mlx5 core dirver updates for both net-next and rdma-next branches.
From Christophe JAILLET, first three patche to use kvfree where needed.
From: Or Gerlitz <ogerlitz@mellanox.com>
Next six patches from Roi and Co adds support for merged
sriov e-switch which comes to serve cases where both PFs, VFs set
on them and both uplinks are to be used in single v-switch SW model.
When merged e-switch is supported, the per-port e-switch is logically
merged into one e-switch that spans both physical ports and all the VFs.
This model allows to offload TC eswitch rules between VFs belonging
to different PFs (and hence have different eswitch affinity), it also
sets the some of the foundations needed for uplink LAG support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull mtd fixes from Boris Brezillon:
"NAND fixes:
- Fix read path of the Marvell NAND driver
- Make sure we don't pass a u64 to ndelay()
CFI fix:
- Fix the map_word_andequal() implementation"
* tag 'mtd/fixes-for-4.17-rc6' of git://git.infradead.org/linux-mtd:
mtd: rawnand: Fix return type of __DIVIDE() when called with 32-bit
mtd: rawnand: marvell: Fix read logic for layouts with ->nchunks > 2
mtd: Fix comparison in map_word_andequal()
When a tape drive is exported via LIO using the pscsi module, a read
that requests more bytes per block than the tape can supply returns an
empty buffer. This is because the pscsi pass-through target module sees
the "ILI" illegal length bit set and thinks there is no reason to return
the data.
This is a long-standing transport issue, since it assumes that no data
need be returned under a check condition, which isn't always the case
for tape.
Add in a check for tape reads with the ILI, EOM, or FM bits set, with a
sense code of NO_SENSE, treating such cases as if the read
succeeded. The layered tape driver then "does the right thing" when it
gets such a response.
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch adds a common glue code for optimized implementations of
MORUS AEAD algorithms.
Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There can be a lot of workqueue workers and they all show up with the
cryptic kworker/* names making it difficult to understand which is
doing what and how they came to be.
# ps -ef | grep kworker
root 4 2 0 Feb25 ? 00:00:00 [kworker/0:0H]
root 6 2 0 Feb25 ? 00:00:00 [kworker/u112:0]
root 19 2 0 Feb25 ? 00:00:00 [kworker/1:0H]
root 25 2 0 Feb25 ? 00:00:00 [kworker/2:0H]
root 31 2 0 Feb25 ? 00:00:00 [kworker/3:0H]
...
This patch makes workqueue workers report the latest workqueue it was
executing for through /proc/PID/{comm,stat,status}. The extra
information is appended to the kthread name with intervening '+' if
currently executing, otherwise '-'.
# cat /proc/25/comm
kworker/2:0-events_power_efficient
# cat /proc/25/stat
25 (kworker/2:0-events_power_efficient) I 2 0 0 0 -1 69238880 0 0...
# grep Name /proc/25/status
Name: kworker/2:0-events_power_efficient
Unfortunately, ps(1) truncates comm to 15 characters,
# ps 25
PID TTY STAT TIME COMMAND
25 ? I 0:00 [kworker/2:0-eve]
making it a lot less useful; however, this should be an easy fix from
ps(1) side.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Craig Small <csmall@enc.com.au>
In order to be able to provide correct driver_data for pci_epf device,
a separate configfs entry for each pci_epf_device_id table entry in
pci_epf_driver is required.
Add support to create configfs entry for each pci_epf_device_id
table entry here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
This per netns sysctl allows for TCP SACK compression fine-tuning.
This limits number of SACK that can be compressed.
Using 0 disables SACK compression.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This per netns sysctl allows for TCP SACK compression fine-tuning.
Its default value is 1,000,000, or 1 ms to meet TSO autosizing period.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This counter tracks number of ACK packets that the host has not sent,
thanks to ACK compression.
Sample output :
$ nstat -n;sleep 1;nstat|egrep "IpInReceives|IpOutRequests|TcpInSegs|TcpOutSegs|TcpExtTCPAckCompressed"
IpInReceives 123250 0.0
IpOutRequests 3684 0.0
TcpInSegs 123251 0.0
TcpOutSegs 3684 0.0
TcpExtTCPAckCompressed 119252 0.0
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When TCP receives an out-of-order packet, it immediately sends
a SACK packet, generating network load but also forcing the
receiver to send 1-MSS pathological packets, increasing its
RTX queue length/depth, and thus processing time.
Wifi networks suffer from this aggressive behavior, but generally
speaking, all these SACK packets add fuel to the fire when networks
are under congestion.
This patch adds a high resolution timer and tp->compressed_ack counter.
Instead of sending a SACK, we program this timer with a small delay,
based on RTT and capped to 1 ms :
delay = min ( 5 % of RTT, 1 ms)
If subsequent SACKs need to be sent while the timer has not yet
expired, we simply increment tp->compressed_ack.
When timer expires, a SACK is sent with the latest information.
Whenever an ACK is sent (if data is sent, or if in-order
data is received) timer is canceled.
Note that tcp_sack_new_ofo_skb() is able to force a SACK to be sent
if the sack blocks need to be shuffled, even if the timer has not
expired.
A new SNMP counter is added in the following patch.
Two other patches add sysctls to allow changing the 1,000,000 and 44
values that this commit hard-coded.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clean up SPDX-License-Identifier and removing licensing leftovers.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Before changing the arguments of the functions fsnotify_add_mark()
and fsnotify_add_mark_locked(), convert most callers to use a wrapper.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Make some code that handles marks of object types inode and vfsmount
generic, so it can handle other object types.
Introduce fsnotify_foreach_obj_type macro to iterate marks by object type
and fsnotify_iter_{should|set}_report_type macros to set/test report_mask.
This is going to be used for adding mark of another object type
(super block mark).
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
inode_mark and vfsmount_mark arguments are passed to handle_event()
operation as function arguments as well as on iter_info struct.
The difference is that iter_info struct may contain marks that should
not be handled and are represented as NULL arguments to inode_mark or
vfsmount_mark.
Instead of passing the inode_mark and vfsmount_mark arguments, add
a report_mask member to iter_info struct to indicate which marks should
be handled, versus marks that should only be kept alive during user
wait.
This change is going to be used for passing more mark types
with handle_event() (i.e. super block marks).
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
An fsnotify_mark_connector is referencing a single type of object
(either inode or vfsmount). Instead of storing a type mask in
connector->flags, store a single type id in connector->type to
identify the type of object.
When a connector object is detached from the object, its type is set
to FSNOTIFY_OBJ_TYPE_DETACHED and this object is not going to be
reused.
The function fsnotify_clear_marks_by_group() is the only place where
type mask was used, so use type flags instead of type id to this
function.
This change is going to be more convenient when adding a new object
type (super block).
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Provide two extra functions, proc_create_net_data_write() and
proc_create_net_single_write() that act like their non-write versions but
also set a write method in the proc_dir_entry struct.
An internal simple write function is provided that will copy its buffer and
hand it to the pde->write() method if available (or give an error if not).
The buffer may be modified by the write method.
Signed-off-by: David Howells <dhowells@redhat.com>
This fixes memory leaks in cases where we got the station
info but failed sending it out properly.
Fixes: 8689c051a2 ("cfg80211: dynamically allocate per-tid stats for station info")
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add device_link from panel device (supplier) to DRM device (consumer)
when drm_panel_attach() is called. This patch should protect the master
DRM driver if an attached panel driver unbinds while it is in use. The
device_link should make sure the DRM device is unbound before the panel
driver becomes unavailable.
The device_link is removed when drm_panel_detach() is called. The
drm_panel_detach() should be called by the consumer DRM driver, not the
panel driver, otherwise both drivers are racing to delete the same link.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b53584fd988d045c13de22d81825395b0ae0aad7.1524727888.git.jsarha@ti.com
With the addition of TXQ stats in the per-tid statistics the struct
station_info grew significantly. This resulted in stack size warnings
due to the structure itself being above the limit for the warnings.
Add an allocation function that those who want to provide per-tid
stats should use to allocate the tid array, i.e.
struct station_info::pertid.
Cc: Toke Høiland-Jørgensen <toke@toke.dk>
Fixes: 52539ca89f ("cfg80211: Expose TXQ stats and parameters to userspace")
Signed-off-by: Arend van Spriel <aspriel@gmail.com>
[johannes: fix missing BIT() and logic by removing]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
wiphy names were recently limited to 128 bytes by commit a7cfebcb75
("cfg80211: limit wiphy names to 128 bytes"). As it turns out though,
this isn't sufficient because dev_vprintk_emit() needs the syslog header
string "SUBSYSTEM=ieee80211\0DEVICE=+ieee80211:$devname" to fit into 128
bytes. This triggered the "device/subsystem name too long" WARN when
the device name was >= 90 bytes. As before, this was reproduced by
syzbot by sending an HWSIM_CMD_NEW_RADIO command to the MAC80211_HWSIM
generic netlink family.
Fix it by further limiting wiphy names to 64 bytes.
Reported-by: syzbot+e64565577af34b3768dc@syzkaller.appspotmail.com
Fixes: a7cfebcb75 ("cfg80211: limit wiphy names to 128 bytes")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This function allows to send a HCI command without expecting any
controller event/response in return. This is allowed for vendor-
specific commands only.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
