Dell headset mode platform with ALC236.
It doesn't recording after system resume from S3.
S3 mode was deep. s2idle was not has this issue.
S3 deep will cut of codec power. So, the register will back to default
after resume back.
This patch will solve this issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a document describing the fields provided by
/proc/powerpc/vcpudispatch_stats.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When enabling or disabling the vcpu dispatch statistics, we do a lot of
work including allocating/deallocating memory across all possible cpus
for the DTL buffer. In order to guard against hogging the cpu for too
long, track the time we're taking and yield the processor if necessary.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For Shared Processor LPARs, the POWER Hypervisor maintains a
relatively static mapping of the LPAR processors (vcpus) to physical
processor chips (representing the "home" node) and tries to always
dispatch vcpus on their associated physical processor chip. However,
under certain scenarios, vcpus may be dispatched on a different
processor chip (away from its home node). The actual physical
processor number on which a certain vcpu is dispatched is available to
the guest in the 'processor_id' field of each DTL entry.
The guest can discover the home node of each vcpu through the
H_HOME_NODE_ASSOCIATIVITY(flags=1) hcall. The guest can also discover
the associativity of physical processors, as represented in the DTL
entry, through the H_HOME_NODE_ASSOCIATIVITY(flags=2) hcall.
These can then be compared to determine if the vcpu was dispatched on
its home node or not. If the vcpu was not dispatched on the home node,
it is possible to determine if the vcpu was dispatched in a different
chip, socket or drawer.
Introduce a procfs file /proc/powerpc/vcpudispatch_stats that can be
used to obtain these statistics. Writing '1' to this file enables
collecting the statistics, while writing '0' disables the statistics.
The statistics themselves are available by reading the procfs file. By
default, the DTLB log for each vcpu is processed 50 times a second so
as not to miss any entries. This processing frequency can be changed
through /proc/powerpc/vcpudispatch_stats_freq.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
hcall_vphn() is specific to pseries and will be used in a subsequent
patch. So, move it to a more appropriate place under
arch/powerpc/platforms/pseries. Also merge vphn.h into lppaca.h
and update vphn selftest to use the new files.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
H_HOME_NODE_ASSOCIATIVITY hcall can take two different flags and return
different associativity information in each case. Generalize the
existing hcall_vphn() function to take flags as an argument and to
return the result. Update the only existing user to pass the proper
arguments.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since we would be introducing a new user of the DTL buffer in a
subsequent patch, we need a way to gatekeep use of the DTL buffer.
The current debugfs interface for DTL allows registering and opening
cpu-specific DTL buffers. Cpu specific files are exposed under
debugfs 'powerpc/dtl/' node, and changing 'dtl_event_mask' in the same
directory enables controlling the event mask used when registering DTL
buffer for a particular cpu.
Subsequently, we will be introducing a user of the DTL buffers that
registers access to the DTL buffers across all cpus with the same event
mask. To ensure these two users do not step on each other, we introduce
a rwlock to gatekeep DTL buffer access. This fits the requirement of the
current debugfs interface wanting to allow multiple independent
cpu-specific users (read lock), and the subsequent user wanting
exclusive access (write lock).
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Introduce new helpers for DTL buffer allocation and registration and
have the existing code use those.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Don't split error messages across lines, for grepability]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is enabled, we always initialize
DTL enable mask to DTL_LOG_PREEMPT (0x2). There are no other places
where the mask is changed. As such, when reading the DTL log buffer
through debugfs, there is no need to save and restore the previous mask
value.
We don't need to save and restore the earlier mask value if
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not enabled. So, remove the field
from the structure as well.
Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
REGMAP_SCCB is selected by ov772x and ov9650 drivers,
but CONFIG_REGMAP may not, so building will fails:
rivers/media/i2c/ov772x.c: In function ov772x_probe:
drivers/media/i2c/ov772x.c:1360:22: error: variable ov772x_regmap_config has initializer but incomplete type
static const struct regmap_config ov772x_regmap_config = {
^~~~~~~~~~~~~
drivers/media/i2c/ov772x.c:1361:4: error: const struct regmap_config has no member named reg_bits
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 5bbf32217b ("media: ov772x: use SCCB regmap")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190704093553.49904-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not issue CLP_SET_ENABLE_MIO after opting out of MIO instruction
usage. This should not fix a bug but reduce overhead within firmware.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Unfortunately we have to handle a class of devices that don't support the
new MIO instructions. Adjust resource assignment and mapping accordingly.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This reverts commit e70b3f5da0.
EJ writes:
Thinh found this patch might cause a failure in USB CV TD 9.13
Set Configuration Test. We are trying to fix it. Could you
please defer the merging of this patch until we fix it?
So am now dropping it.
Reported-by: EJ Hsu <ejh@nvidia.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable CONFIG_IPV6 in ppc64_defconfig to enable
certain network functionalities required for tests.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The event will be sent as part of the vblank enable during the modeset
if the crtc is not being kept disabled.
Fixes: 5f2f911578 ("drm/imx: atomic phase 3 step 1: Use atomic configuration")
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Notify drm core before sending pending events during crtc disable.
This fixes the first event after disable having an old stale timestamp
by having drm_crtc_vblank_off update the timestamp to now.
This was seen while debugging weston log message:
Warning: computed repaint delay is insane: -8212 msec
This occurred due to:
1. driver starts up
2. fbcon comes along and restores fbdev, enabling vblank
3. vblank_disable_fn fires via timer disabling vblank, keeping vblank
seq number and time set at current value
(some time later)
4. weston starts and does a modeset
5. atomic commit disables crtc while it does the modeset
6. ipu_crtc_atomic_disable sends vblank with old seq number and time
Fixes: a474478642 ("drm/imx: fix crtc vblank state regression")
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The RISC-V free_initrd_mem is identical to the default one, except
that it doesn't poison the freed memory. Remove it so that the
default implementations gets used instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reading the count register clears the interrupt signal. Currently, the
count registers are read into 'regval' variable but the variable is
never used. Therefore remove it. V2 of this patch add comments to
justify the readl calls without checking the return value.
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Pointer dev is being dereferenced when passed to the inlined
functon dev_name, however, dev is later being null checked
so at first this seems like a potential null pointer dereference.
In fact, _reset_control_get_from_lookup is only ever called from
__reset_control_get, right after checking dev->of_node hence
dev can never be null. Clean this up by removing the redundant
null check.
Thanks to Philipp Zabel for spotting that dev can never be null.
Addresses-Coverity: ("Dereference before null check")
Fixes: 6691dffab0 ("reset: add support for non-DT systems")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.
So, replace the following form:
sizeof(*defslvs) + ((ndevs - 1) * sizeof(struct i3c_ccc_dev_desc))
with:
struct_size(defslvs, slaves, ndevs - 1)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
After recent hibernation-related changes, there are no more callers
of dev_pm_skip_next_resume_phases() except for the PM core itself
in which it is more straightforward to run the statements from
that function directly, so do that and drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Using acpi_device_get_power() outside of ACPI device initialization
and ACPI sysfs is problematic due to the way in which power resources
are handled by it, so unexport it and add a paragraph explaining the
pitfalls to its kerneldoc comment.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In order to allow dev_pm_qos_read_value() to read values for different
QoS requests, pass request type as a parameter to these routines.
For now, it only supports resume-latency request type but will be
extended to frequency limit (min/max) constraints later on.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
dev_pm_qos_read_value() will soon need to support more constraint types
(min/max frequency) and will have another argument to it, i.e. type of
the constraint. While that is fine for the existing users of
dev_pm_qos_read_value(), but not that optimal for the callers of
__dev_pm_qos_read_value() and dev_pm_qos_raw_read_value() as all the
callers of these two routines are only looking for resume latency
constraint.
Lets make these two routines care only about the resume latency
constraint and rename them to __dev_pm_qos_resume_latency() and
dev_pm_qos_raw_resume_latency().
Suggested-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In order to use the same set of routines to register notifiers for
different request types, update the existing
dev_pm_qos_{add|remove}_notifier() routines with an additional
parameter: request-type.
For now, it only supports resume-latency request type but will be
extended to frequency limit (min/max) constraints later on.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
perf/core has an earlier version of the x86/cpu tree merged, to avoid
conflicts, and due to this we want to pick up this ABI impacting
revert as well:
049331f277: ("x86/fsgsbase: Revert FSGSBASE support")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Stephen writes:
After merging the driver-core tree, today's linux-next build (x86_64
allmodconfig) produced this warning:
fs/orangefs/orangefs-debugfs.c: In function 'orangefs_debugfs_init':
fs/orangefs/orangefs-debugfs.c:193:1: warning: label 'out' defined but not used [-Wunused-label]
out:
^~~
fs/orangefs/orangefs-debugfs.c: In function 'orangefs_kernel_debug_init':
fs/orangefs/orangefs-debugfs.c:204:17: warning: unused variable 'ret' [-Wunused-variable]
struct dentry *ret;
^~~
Fix this up and change the return type of the function to void as it can
not fail, which cleans up some more code and variables as well.
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Martin Brandenburg <martin@omnibond.com>
Cc: devel@lists.orangefs.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: f095adba36 ("orangefs: no need to check return value of debugfs_create functions")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oded writes:
This tag contains the following changes for kernel 5.3:
- Change the way the device's CPU access the host memory. This allows the
driver to use the kernel API of setting DMA mask in a standard way (call
it once).
- Add a new debugfs entry to show the status of the internal DMA and
compute engines. This is very helpful for debugging in case a command
submission get stuck.
- Return to the user a mask of the internal engines indicating their busy
state.
- Make sure to restore registers that can be modified by the user to their
default values. Only applies to registers that are initialized by the
driver.
- Elimination of redundant and dead-code.
- Support memset of the device's memory with size larger then 4GB
- Force the user to set the device to debug mode before configuring the
device's coresight infrastructure
- Improve error printing in case of interrupts from the device
* tag 'misc-habanalabs-next-2019-07-04' of git://people.freedesktop.org/~gabbayo/linux: (31 commits)
habanalabs: Add busy engines bitmask to HW idle IOCTL
habanalabs: Add debugfs node for engines status
habanalabs: Update the device idle check
habanalabs: Allow accessing host mapped addresses via debugfs
habanalabs: add WARN in case of bad MMU mapping
habanalabs: remove DMA mask hack for Goya
habanalabs: set Goya CPU to use ASIC MMU
habanalabs: add MMU mappings for Goya CPU
habanalabs: initialize MMU context for driver
habanalabs: de-couple MMU and VM module initialization
habanalabs: initialize device CPU queues after MMU init
docs/habanalabs: update text for some entries in sysfs
habanalabs: add rate-limit to an error message
habanalabs: remove simulator dedicated code
habanalabs: restore unsecured registers default values
habanalabs: clear sobs and monitors in context switch
habanalabs: make tpc registers secured
habanalabs: don't limit packet size for device CPU
habanalabs: support device memory memset > 4GB
habanalabs: print event name for fatal and non-RAZWI events
...
In spufs_cntl_fops, since we use nonseekable_open() to open, we
should use no_llseek() to seek, not generic_file_llseek().
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We make the invalid assumption in arm_smmu_detach_dev() that the ATC is
clear after calling pci_disable_ats(). For one thing, only enabling the
PCIe ATS capability constitutes an implicit invalidation event, so the
comment was wrong. More importantly, the ATS capability isn't necessarily
disabled by pci_disable_ats() in a PF, if the associated VFs have ATS
enabled. Explicitly invalidate all ATC entries in arm_smmu_detach_dev().
The endpoint cannot form new ATC entries because STE.EATS is clear.
Fixes: 9ce27afc08 ("iommu/arm-smmu-v3: Add support for PCI ATS")
Reported-by: Manoj Kumar <Manoj.Kumar3@arm.com>
Reported-by: Robin Murphy <Robin.Murphy@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When CONFIG_UML_TIME_TRAVEL_SUPPORT isn't set, the build was broken.
Fix this.
Fixes: 065038706f ("um: Support time travel mode")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
