The Odroid-N2 schematics show that the following pins are used for the
reset and interrupt lines:
- GPIOZ_14 is the PHY interrupt line
- GPIOZ_15 is the PHY reset line
The GPIOZ_14 and GPIOZ_15 pins are special. The datasheet describes that
they are "3.3V input tolerant open drain (OD) output pins". This means
the GPIO controller can drive the output LOW to reset the PHY. To
release the reset it can only switch the pin to input mode. The output
cannot be driven HIGH for these pins.
This requires configuring the reset line as GPIO_OPEN_DRAIN because
otherwise the PHY will be stuck in "reset" state (because driving the
pin HIGH seems to result in the same signal as driving it LOW).
The reset line works together with a pull-up resistor (R143 in the
Odroid-N2 schematics). The SoC can drive GPIOZ_14 LOW to assert the PHY
reset. However, since the SoC can't drive the pin HIGH (to release the
reset) we switch the mode to INPUT and let the pull-up resistor take
care of driving the reset line HIGH.
Switch to GPIOZ_15 for the PHY reset line instead of using GPIOZ_14
(which actually is the interrupt line).
Move from the "snps" specific resets to the MDIO framework's
reset-gpios because only the latter honors the GPIO flags.
Use the GPIO flags (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN) to match with
the pull-up resistor because this will:
- drive the output LOW to reset the PHY (= active low)
- switch the pin to INPUT mode so the pull-up will take the PHY out of
reset
Fixes: 51d116557b2044 ("arm64: dts: meson-g12a-x96-max: Add Gigabit Ethernet Support")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Kbuild test robot reported compile warning:
warning: no return statement in function returning non-void
in function page_pool_request_shutdown, when CONFIG_PAGE_POOL is disabled.
The fix makes the code a little more verbose, with a descriptive variable.
Fixes: 99c07c43c4 ("xdp: tracking page_pool resources and safe removal")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff's picking up more responsibilities elsewhere, and Chuck's agreed to
take over.
For now, as before, nothing's changing day-to-day, but I want to have a
co-maintainer if only for bus factor.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
calc_vmlinuz_load_addr.c requires SZ_64K to be defined for alignment
purposes. It included "../../../../include/linux/sizes.h" to define
that size, however "sizes.h" tries to include <linux/const.h> which
assumes linux system headers. These may not exist eg. the following
error was encountered when building Linux for OpenWrt under macOS:
In file included from arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:16:
arch/mips/boot/compressed/../../../../include/linux/sizes.h:11:10: fatal error: 'linux/const.h' file not found
^~~~~~~~~~
Change makefile to force building on local linux headers instead of
system headers. Also change eye-watering relative reference in include
file spec.
Thanks to Jo-Philip Wich & Petr Štetiar for assistance in tracking this
down & fixing.
Suggested-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Admins may wish to log different measurements using different IMA
templates. Add support for overriding the default template on a per-rule
basis.
Inspired-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Sort the netlink policy array by netlink attribute name. This will make
it easier in the future to find the entry you are looking for when you
need to make changes, or to make sure you don't add the same entry
twice.
Fix the whitespace while we are there.
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Presently, there is no path to DMA map P2PDMA memory, so if a TLP targeting
this memory hits the root complex and an IOMMU is present, the IOMMU will
reject the transaction, even if the RC would support P2PDMA.
So until the kernel knows to map these DMA addresses in the IOMMU, we
should not enable the whitelist when an IOMMU is present.
Link: https://lore.kernel.org/linux-pci/20190522201252.2997-1-logang@deltatee.com/
Fixes: 0f97da8310 ("PCI/P2PDMA: Allow P2P DMA between any devices under AMD ZEN Root Complex")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Commit ce4ab73ab0 ("net: stmmac: drop the reset delays from struct
stmmac_mdio_bus_data") moved the reset delay array from struct
stmmac_mdio_bus_data to a stack variable.
The values from the array inside struct stmmac_mdio_bus_data were
previously initialized to 0 because the struct was allocated using
devm_kzalloc(). The array on the stack has to be initialized
explicitly, else we might be reading garbage values.
Initialize all reset delays to 0 to ensure that the values are 0 if the
"snps,reset-delays-us" property is not defined.
This fixes booting at least two boards (MIPS pistachio marduk and ARM
sun8i H2+ Orange Pi Zero). These are hanging during boot when
initializing the stmmac Ethernet controller (as found by Kernel CI).
Both have in common that they don't define the "snps,reset-delays-us"
property.
Fixes: ce4ab73ab0 ("net: stmmac: drop the reset delays from struct stmmac_mdio_bus_data")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kselftest can be run against older kernels. Instead of failing hard
when a feature is unsupported, return the KSFT_SKIP exit code.
Specifically, do not fail hard on missing udp zerocopy.
The udp gso bench test runs multiple test cases from a single script.
Fail if any case fails, else return skip if any test is skipped.
Link: https://lore.kernel.org/lkml/20190618171516.GA17547@kroah.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
empty_child_inc/dec() use the ternary operator for conditional
operations. The conditions involve the post/pre in/decrement
operator and the operation is only performed when the condition
is *not* true. This is hard to parse for humans, use a regular
'if' construct instead and perform the in/decrement separately.
This also fixes two warnings that are emitted about the value
of the ternary expression being unused, when building the kernel
with clang + "kbuild: Remove unnecessary -Wno-unused-value"
(https://lore.kernel.org/patchwork/patch/1089869/):
CC net/ipv4/fib_trie.o
net/ipv4/fib_trie.c:351:2: error: expression result unused [-Werror,-Wunused-value]
++tn_info(n)->empty_children ? : ++tn_info(n)->full_children;
Fixes: 95f60ea3e9 ("fib_trie: Add collapse() and should_collapse() to resize")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A user reported that routes are getting installed with type 0 (RTN_UNSPEC)
where before the routes were RTN_UNICAST. One example is from accel-ppp
which apparently still uses the ioctl interface and does not set
rtmsg_type. Another is the netlink interface where ipv6 does not require
rtm_type to be set (v4 does). Prior to the commit in the Fixes tag the
ipv6 stack converted type 0 to RTN_UNICAST, so restore that behavior.
Fixes: e8478e80e5 ("net/ipv6: Save route type in rt6_info")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove some enums from the UAPI definition that were only used
internally and are NOT part of the UAPI.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The DRC appears to be effectively empty after an RPC/RDMA transport
reconnect. The problem is that each connection uses a different
source port, which defeats the DRC hash.
Clients always have to disconnect before they send retransmissions
to reset the connection's credit accounting, thus every retransmit
on NFS/RDMA will miss the DRC.
An NFS/RDMA client's IP source port is meaningless for RDMA
transports. The transport layer typically sets the source port value
on the connection to a random ephemeral port. The server already
ignores it for the "secure port" check. See commit 16e4d93f6d
("NFSD: Ignore client's source port on RDMA transports").
The Linux NFS server's DRC resolves XID collisions from the same
source IP address by using the checksum of the first 200 bytes of
the RPC call header.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
While trying to get the uart with parity working I found setting even
parity enabled odd parity insted. Fix the register settings to match
the datasheet of AR9331.
A similar patch was created by 8devices, but not sent upstream.
77c5586ade
Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Julian Wiedmann says:
====================
net/af_iucv: fixes 2019-06-18
I spent a few cycles on transmit problems for af_iucv over regular
netdevices - please apply the following fixes to -net.
The first patch allows for skb allocations outside of GFP_DMA, while the
second patch respects that drivers might use skb_cow_head() and/or want
additional dev->needed_headroom.
Patch 3 is for a separate issue, where we didn't setup some of the
netdevice-specific infrastructure when running as a z/VM guest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Even when running as VM guest (ie pr_iucv != NULL), af_iucv can still
open HiperTransport-based connections. For robust operation these
connections require the af_iucv_netdev_notifier, so register it
unconditionally.
Also handle any error that register_netdevice_notifier() returns.
Fixes: 9fbd87d413 ("af_iucv: handle netdev events")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The HiperSockets-based transport path in af_iucv is still too closely
entangled with qeth.
With commit a647a02512 ("s390/qeth: speed-up L3 IQD xmit"), the
relevant xmit code in qeth has begun to use skb_cow_head(). So to avoid
unnecessary skb head expansions, af_iucv must learn to
1) respect dev->needed_headroom when allocating skbs, and
2) drop the header reference before cloning the skb.
While at it, also stop hard-coding the LL-header creation stage and just
use the appropriate helper.
Fixes: a647a02512 ("s390/qeth: speed-up L3 IQD xmit")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
af_iucv sockets over z/VM IUCV require that their skbs are allocated
in DMA memory. This restriction doesn't apply to connections over
HiperSockets. So only set this limit for z/VM IUCV sockets, thereby
increasing the likelihood that the large (and linear!) allocations for
HiperTransport messages succeed.
Fixes: 3881ac441f ("af_iucv: add HiperSockets transport")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clang warns:
drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c:80:6: warning: logical not is
only applied to the left hand side of this bitwise operator
[-Wlogical-not-parentheses]
if (!phy->cfg->quirks & V3_0_0_10NM_OLD_TIMINGS_QUIRK) {
^ ~
drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c:80:6: note: add parentheses
after the '!' to evaluate the bitwise operator first
if (!phy->cfg->quirks & V3_0_0_10NM_OLD_TIMINGS_QUIRK) {
^
( )
drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c:80:6: note: add parentheses
around left hand side expression to silence this warning
if (!phy->cfg->quirks & V3_0_0_10NM_OLD_TIMINGS_QUIRK) {
^
( )
1 warning generated.
Add parentheses around the bitwise AND so it is evaluated first then
negated.
Fixes: 3dbbf8f09e ("drm/msm/dsi: Add old timings quirk for 10nm phy")
Link: https://github.com/ClangBuiltLinux/linux/issues/547
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Pull power management fix from Rafael Wysocki:
"Prevent PCI bridges in general (and PCIe ports in particular) from
being put into low-power states during system-wide suspend transitions
if there are any devices in D0 below them and refine the handling of
PCI devices in D0 during suspend-to-idle cycles"
* tag 'pm-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PCI: PM: Skip devices in D0 for suspend-to-idle
Pull apparmor bug fixes from John Johansen:
- fix PROFILE_MEDIATES for untrusted input
- enforce nullbyte at end of tag string
- reset pos on failure to unpack for various functions
* tag 'apparmor-pr-2019-06-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: reset pos on failure to unpack for various functions
apparmor: enforce nullbyte at end of tag string
apparmor: fix PROFILE_MEDIATES for untrusted input
Keep track of the STM coresight device which is a child device
of the AMBA device. Since we can get to the coresight_device
from the "device" instance, remove the explicit field.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to use a consistent device naming scheme,
clean up the device link tracking in replicator driver.
Use the "coresight" device instead of the "real" parent device
for all internal purposes. All other requests (e.g, power management,
DMA operations) must use the "real" device which is the parent device.
Since the CATU driver also uses the TMC-SG infrastructure, update
the callers to ensure they pass the appropriate device argument
for the tables.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to use a consistent device naming scheme,
clean up the device link tracking in replicator driver.
Use the "coresight" device instead of the "real" parent device
for all internal purposes. All other requests (e.g, power management,
DMA operations) must use the "real" device which is the parent device.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to use a consistent device naming scheme,
clean up the device link tracking in funnel driver.
Use the "coresight" device instead of the "real" parent device
for all internal purposes. All other requests (e.g, power management,
DMA operations) must use the "real" device which is the parent device.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch avoids setting the truncated flag when operating in snapshot
mode since the trace buffer is expected to be truncated and discontinuous
from one snapshot to another. Moreover when the truncated flag is set
the perf core stops enabling the event, waiting for user space to consume
the data. In snapshot mode this is clearly not what we want since it
results in stale data.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When working in snapshot mode function perf_aux_output_begin()
does not set the handle->size because the size is expected to be
deduced by the placement of the "head" and "old" pointers in user
space. As such there is no point in trying to adjust the amount
of data to copy to the ring buffer.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unify amongst sink drivers how the AUX ring buffer head is communicated
to user space. That way the same algorithm in user space can be used to
determine where the latest data is and how much of it to access.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unify amongst sink drivers how the AUX ring buffer head is communicated
to user space. That way the same algorithm in user space can be used to
determine where the latest data is and how much of it to access.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unify amongst sink drivers how the AUX ring buffer head is communicated
to user space. That way the same algorithm in user space can be used to
determine where the latest data is and how much of it to access.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull input updates from Dmitry Torokhov:
"Just a few small fixups and switching a couple of Thinkpads to SMBus
for touchpads as PS/2 emulation is not working well"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics - enable SMBus on ThinkPad E480 and E580
Input: imx_keypad - make sure keyboard can always wake up system
Input: iqs5xx - get axis info before calling input_mt_init_slots()
Input: uinput - add compat ioctl number translation for UI_*_FF_UPLOAD
Input: silead - add MSSL0017 to acpi_device_id
Input: elantech - enable middle button support on 2 ThinkPads
Input: elan_i2c - increment wakeup count if wake source
This patch corrects the SPDX License Identifier style
in header file related to Drivers for FRU Support Interface.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Allwinner SoCs have an efuse supported in Linux, with a matching Device
Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SNVS LPGR IP block is also found on other i.MX SoCs that
are not covered by the current SOC_IMX6 || SOC_IMX7D logic.
One example is the i.MX7ULP.
To avoid keep expanding the SoC logic selection, make it broader
by using the more generic ARCH_MXC symbol instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
