Under Vega10 SR-IOV VF, L1 register access mode should be enabled by
default as the non-security VF will no longer be supported.
Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[What]
readptr read always returns zero, since most likely
these blocks are either power or clock gated.
[How]
fetch rptr after amdgpu_ring_alloc() which informs
the power management code that the block is about to be
used and hence the gating is turned off.
Signed-off-by: Louis Li <Ching-shih.Li@amd.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[What]
vce ring test fails consistently during resume in s3 cycle, due to
mismatch read & write pointers.
On debug/analysis its found that rptr to be compared is not being
correctly updated/read, which leads to this failure.
Below is the failure signature:
[drm:amdgpu_vce_ring_test_ring] *ERROR* amdgpu: ring 12 test failed
[drm:amdgpu_device_ip_resume_phase2] *ERROR* resume of IP block <vce_v3_0> failed -110
[drm:amdgpu_device_resume] *ERROR* amdgpu_device_ip_resume failed (-110).
[How]
fetch rptr appropriately, meaning move its read location further down
in the code flow.
With this patch applied the s3 failure is no more seen for >5k s3 cycles,
which otherwise is pretty consistent.
V2: remove reduntant fetch of rptr
Signed-off-by: Louis Li <Ching-shih.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Response tag only occupies 6 bits, not 7. This bug is harmless, since
the value has just been shifted to the right by 26 bits, so this is
only a cosmetic fix.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Always mark evicted queues with q->properties.is_evicted = true, even
queues that are inactive for other reason. This simplifies maintaining
the eviction state as it doesn't require updating is_evicted when other
queue activation conditions change.
On the other hand, we now need to check those other queue activation
conditions whenever an evicted queues is restored. To minimize code
duplication, move the queue activation check into a macro so it can be
maintained in one central place.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Cox <Philip.Cox@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
EDC counts are related to instance and se. They are not the same
for different type of EDC. EDC clearing are changed to base on
individual EDC's instance and SE number.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN_VERSION_1_01 is no longer handled in the dal_hw_translate_init
switch since it was inadvertently dropped in the patch that removed the
unnecessary DCN1_01 guards.
This caused numerous regressions on DCN1_01 when loading the driver.
[How]
Add it back.
Fixes: 97df424fe7 ("drm/amd/display: Drop DCN1_01 guards")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When switching from vt to desktop with EDID emulation we can receive
an atomic commit such that we have a crtc where mode_changed = true.
During the dm_update_crtc_state disable pass we remove the stream from
the context and free it on the dm_new_crtc_state.
During the enable pass we compare the new provisional stream to the
dm_old_crtc_state->stream and determine that the stream is unchanged
and no scaling has been changed.
Following this, new_crtc_state->mode_changed is then set to false.
The connectors haven't changed and the CRTC active state hasn't changed
so drm_atomic_crtc_needs_modeset returns false, so we jump to
skip_modeset and we hit:
BUG_ON(dm_new_crtc_state->stream == NULL);
...since the old stream is gone from the context and the new stream is
also still NULL.
[How]
Ensure that we still a stream to reuse before checking if we can reuse
the old stream without a full modeset.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The messages about amdgpu_cs_list_validate are duplicated because the
caller will complain into the logs as well and we can also get
interrupted by a signal here.
Also fix the the caller to not report -EAGAIN from validation.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no reason why we can't enable chained scatterlist for RiscPC,
we already support chained scatterlists in the IOMD DMA support code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reduce the amount of IRQ handling code that RiscPC requires; there's no
need for this duplication if we place the virtual iomem base address for
each bank directly in the irq_data structure. Provide helpers to get
the base address, and setup the base address and register mask.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Move the assembly files for RiscPC from arch/arm/lib to mach-rpc so
that we contain RiscPC bits in one subdirectory.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Correctly parse the video information from the tagged list, so that we
end up with the right bytes-per-char values. When booting with a
tagged list rather than a param block, this allows the decompressor to
display its messages during boot on the screen.
(Boot loaders normally pass a param block on this platform, but the
latest boot loader version recently released does not.)
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Atomwide 3port serial cards seem to leave their interrupts active when
exiting RISC OS, resulting in an interrupt storm during boot, and the
expansion card interrupt being disabled. Avoid this by manually
disabling the interrupt on each serial port via a custom quirk function.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
New Gen3 R-Car platforms incorporate the FDP1 with an updated version
register. No code change is required to support these targets, but they
will currently report an error stating that the device can not be
identified.
Update the driver to match against the new device types.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
uvcvideo creates a debugfs directory based on the device bus number and
device number. If a device contains more than one uvc function, the
creation of the second and following debugfs directories will fail and
print an info message like this:
"uvcvideo: Unable to create debugfs 3-2 directory."
This patch includes the uvc streaming interface number in the debugfs
directory name, to make sure it is unique. The directory name format is
changed from "<busnum>-<devnum>" to "<busnum>-<devnum>-<intfnum>"
Signed-off-by: Torleiv Sundre <torleiv@huddly.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There are some conflicts due to SPDX changes. We also have more
patches being merged via media tree touching them.
So, let's merge back from upstream and address those.
Linux 5.2-rc4
* tag 'v5.2-rc4': (767 commits)
Linux 5.2-rc4
MAINTAINERS: Karthikeyan Ramasubramanian is MIA
i2c: xiic: Add max_read_len quirk
lockref: Limit number of cmpxchg loop retries
uaccess: add noop untagged_addr definition
x86/insn-eval: Fix use-after-free access to LDT entry
kbuild: use more portable 'command -v' for cc-cross-prefix
s390/unwind: correct stack switching during unwind
block, bfq: add weight symlink to the bfq.weight cgroup parameter
cgroup: let a symlink too be created with a cftype file
drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards
drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW
drm/nouveau/secboot: split out FW version-specific LS function pointers
drm/nouveau/secboot: pass max supported FW version to LS load funcs
drm/nouveau/core: support versioned firmware loading
drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device
block: free sched's request pool in blk_cleanup_queue
pktgen: do not sleep with the thread lock held.
net: mvpp2: Use strscpy to handle stat strings
net: rds: fix memory leak in rds_ib_flush_mr_pool
...
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Correctly handle stopping and restarting the encoder, keeping
track of the stop and drain states.
In addition it adds correct handling of corner cases, allowing
v4l2-compliance to pass.
Unfortunately, the code is getting to be quite complicated, so
we need to work on better codec support in v4l2-mem2mem.c to
simplify drivers.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Return an error when attempting to subscribe to those events
for a stateless codec.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
After a resolution change is detected, q_data->sizeimage is updated
to the new format, but buf_prepare is still draining buffers that
need to use the old pre-resolution-change value. So store the sizeimage
value in q_data->vb2_sizeimage in queue_setup and use that in
buf_prepare.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The stateful encoder requires the presence of this control.
Since a single buffer is sufficient for vicodec, we just
set this control to 1.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Setting the encoder output format to e.g. 1920x1080 will set the
crop rectangle to 1920x1088, the coded resolution to 1920x1088 and
the capture coded resolution and sizeimage to 1920x1088 as well.
Note that this might change, since the encoder spec is still in
flux with respect to how this should behave.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Rather than returning width/height values of 0, just default to
a format. Formats in V4L2 are always supposed to be valid, there
is no concept of an invalid format.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
v4l2_ctrl_request_complete can sleep, so can't be called while
a spinlock is held.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Amlogic SoCs feature a powerful video decoder unit able to
decode many formats, with a performance of usually up to 4k60.
This is a driver for this IP that is based around the v4l2 m2m framework.
It features decoding for:
- MPEG 1
- MPEG 2
Supported SoCs are: GXBB (S905), GXL (S905X/W/D), GXM (S912)
There is also a hardware bitstream parser (ESPARSER) that is handled here.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The ioctl argument was parsed as the wrong type.
Fixes: b21d9c435f ("ovl: support the FS_IOC_FS[SG]ETXATTR ioctls")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In RV32, udelay would delay the wrong cycle. When it shifts right
"UDELAY_SHIFT" bits, it either delays 0 cycle or 1 cycle. It only works
correctly in RV64. Because the 'ucycles' always needs to be 64 bits
variable.
Signed-off-by: Nick Hu <nickhu@andestech.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
[paul.walmsley@sifive.com: fixed minor spelling error]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Commit bf0102a0fd ("riscv: call pm_power_off from machine_halt /
machine_power_off") removed the export of pm_power_off, but it is used by
several modules:
ERROR: "pm_power_off" [drivers/mfd/rk808.ko] undefined!
ERROR: "pm_power_off" [drivers/mfd/max8907.ko] undefined!
ERROR: "pm_power_off" [drivers/mfd/axp20x.ko] undefined!
ERROR: "pm_power_off" [drivers/char/ipmi/ipmi_poweroff.ko] undefined!
Signed-off-by: Andreas Schwab <schwab@suse.de>
Fixes: bf0102a0fd ("riscv: call pm_power_off from machine_halt / machine_power_off")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
When building sg tables, honor the device sg list segment size limitation.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Enable PRCI clock driver and serial console by default, so the default
upstream defconfig is bootable to a serial console.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The HB port may not be available for various reasons. Either it has been
disabled by a config option or by the hypervisor for other reasons.
In that case, make sure we have a backup plan and use the backdoor port
instead with a performance penalty.
Cc: stable@vger.kernel.org
Fixes: 89da76fde6 ("drm/vmwgfx: Add VMWare host messaging capability")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Starting with ACPI 6.2 bits 1 and 2 of the BGRT status field are no longer
reserved. These bits are now used to indicate if the image needs to be
rotated before being displayed.
The first device using these bits has now shown up (the GPD MicroPC) and
the reserved bits check causes us to reject the valid BGRT table on this
device.
Rather then changing the reserved bits check, allowing only the 2 new bits,
instead just completely remove it so that we do not end up with a similar
problem when more bits are added in the future.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both
direction have no differences.
This commit unifies the pairs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
