It is useful to aggregate counts per die. E.g. Uncore becomes die-scope
on Xeon Cascade Lake-AP.
Introduce a new option "--per-die" to support per-die aggregation.
The global id for each core has been changed to socket + die id + core
id. The global id for each die is socket + die id.
Add die information for per-core aggregation. The output of per-core
aggregation will be changed from "S0-C0" to "S0-D0-C0". Any scripts
which rely on the output format of per-core aggregation probably be
broken.
For 'perf stat record/report', there is no die information when
processing the old perf.data. The per-die result will be the same as
per-socket.
Committer notes:
Renamed 'die' variable to 'die_id' to fix the build in some systems:
CC /tmp/build/perf/builtin-script.o
cc1: warnings being treated as errors
builtin-stat.c: In function 'perf_env__get_die':
builtin-stat.c:963: error: declaration of 'die' shadows a global declaration
util/util.h:19: error: shadowed declaration is here
mv: cannot stat `/tmp/build/perf/.builtin-stat.o.tmp': No such file or directory
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-bsnhx7vgsuu6ei307mw60mbj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The IR protocol can now only be set via the rc protocols sysfs file rather
than via module parameters or a custom procfs file. So, it is no longer
necessary to periodically check for protocol changes.
The IR_RCMM protocol does not decode the Philips RC-MM protocol (12, 24 or
32 bit variants) or any protocol rc-core can encode, so this is marked
RC_PROTO_UNKNOWN.
Tested on Technotrend/Hauppauge WinTV Nexus-S rev2.1, which comes
with a small black hauppauge remote.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Move common code into a new function.
This provides the needed functionality to use dvb_module_probe() instead
of dvb_attach()!
[mchehab+samsung@kernel.org: fix an out of order error return code]
Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Refactor out the common parts of stv6110x_probe() and stv6110x_attach()
into separate functions.
This provides the needed functionality to use dvb_module_probe() instead
of dvb_attach()!
Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Commit 020bc7354a ("media: staging/imx: Allow driver to build
if COMPILE_TEST is enabled") incorrectly assumed that the imx media
driver had no build time dependency with IMX_IPUV3_CORE.
Building on x86_64 without IMX_IPUV3_CORE causes lots of build errors
such as:
All these definitions come from the imx ipu3 core driver, so make
sure that imx media depends on IMX_IPUV3_CORE.
This reverts commit 020bc7354a.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
With the new CPUID.1F, a new level type of CPU topology, 'die', is
introduced. The 'die' information in CPU topology should be added in
perf header.
To be compatible with old perf.data, the patch checks the section size
before reading the die information. The new info is added at the end of
the cpu_topology section, the old perf tool ignores the extra data. It
never reads data crossing the section boundary.
The new perf tool with the patch can be used on legacy kernel. Add a new
function has_die_topology() to check if die topology information is
supported by kernel. The function only check X86 and CPU 0. Assuming
other CPUs have same topology.
Use similar method for core and socket to support die id and sibling
dies string.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1559688644-106558-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One can just record callchains in the kernel or user space with this new
options.
We can use it together with "--all-kernel" options.
This two options is used just like print_stack(sys) or print_ustack(usr)
for systemtap.
Shown below is the usage of this new option combined with "--all-kernel"
options:
1. Configure all used events to run in kernel space and just collect
kernel callchains.
$ perf record -a -g --all-kernel --kernel-callchains
2. Configure all used events to run in kernel space and just collect
user callchains.
$ perf record -a -g --all-kernel --user-callchains
Committer notes:
Improved documentation to state that asking for kernel callchains really
is asking for excluding user callchains, and vice versa.
Further mentioned that using both won't get both, but nothing, as both
will be excluded.
Signed-off-by: yuzhoujian <yuzhoujian@didichuxing.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1559222962-22891-1-git-send-email-ufo19890607@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So perf_config() uses:
int ret = 0;
perf_config_set__for_each_entry(config_set, section, item) {
...
ret = fn();
if (ret < 0)
break;
}
return ret;
Expecting that that break will imediatelly go to function exit to return
that error value (ret).
The problem is that perf_config_set__for_each_entry() expands into two
nested for() loops, one traversing the sections in a config and the
second the items in each of those sections, so we have to change that
'break' to a goto label right before that final 'return ret'.
With that, for instance 'perf trace' now correctly bails out when a
event that is requested to be added via its 'trace.add_events'
~/.perfconfig entry gets rejected by the kernel BPF verifier:
# perf trace ls
event syntax error: '/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o'
\___ Kernel verifier blocks program loading
(add -v to see detail)
Run 'perf list' for a list of valid events
Error: wrong config key-value pair trace.add_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
#
While before it would continue and explode later, when trying to find
maps that would have been in place had that augmented_raw_syscalls.o
precompiled BPF proggie been accepted by the, humm, bast... rigorous
kernel BPF verifier 8-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Yonghong Song <yhs@fb.com>
Fixes: 8a0a9c7e91 ("perf config: Introduce new init() and exit()")
Link: https://lkml.kernel.org/n/tip-qvqxfk9d0rn1l7lcntwiezrr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On my Juno board with ARM64 CPUs, perf trace command reports the eBPF
program building failure but the command will not exit and continue to
run. If we define an eBPF event in config file, the event will be
parsed with below flow:
perf_config()
`> trace__config()
`> parse_events_option()
`> parse_events__scanner()
`-> parse_events_parse()
`> parse_events_load_bpf()
`> llvm__compile_bpf()
Though the low level functions return back error values when detect eBPF
building failure, but parse_events_option() returns 1 for this case and
trace__config() passes 1 to perf_config(); perf_config() doesn't treat
the returned value 1 as failure and it continues to parse other
configurations. Thus the perf command continues to run even without
enabling eBPF event successfully.
This patch changes error handling in trace__config(), when it detects
failure it will return -1 rather than directly pass error value (1);
finally, perf_config() will directly bail out and perf will exit for
this case.
Committer notes:
Simplified the patch to just check directly the return of
parse_events_option() and it it is non-zero, change err from its initial
zero value to -1.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Yonghong Song <yhs@fb.com>
Fixes: ac96287cae ("perf trace: Allow specifying a set of events to add in perfconfig")
Link: https://lkml.kernel.org/n/tip-x4i63f5kscykfok0hqim3zma@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This has been marked CONFIG_BROKEN for over a year now with no complaints.
Delete the whole thing for good.
The module provided the /dev/infiniband/ucmX interface.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
David Ahern says:
====================
net: Enable nexthop objects with IPv4 and IPv6 routes
This is the final set of the initial nexthop object work. When I
started this idea almost 2 years ago, it took 18 seconds to inject
700k+ IPv4 routes with 1 hop and about 28 seconds for 4-paths. Some
of that time was due to inefficiencies in 'ip', but most of it was
kernel side with excessive synchronize_rcu calls in ipv4, and redundant
processing validating a nexthop spec (device, gateway, encap). Worse,
the time increased dramatically as the number of legs in the routes
increased; for example, taking over 72 seconds for 16-path routes.
After this set, with increased dirty memory limits (fib_sync_mem sysctl),
an improved ip and nexthop objects a full internet fib (743,799 routes
based on a pull in January 2019) can be pushed to the kernel in 4.3
seconds. Even better, the time to insert is "almost" constant with
increasing number of paths. The 'almost constant' time is due to
expanding the nexthop definitions when generating notifications. A
follow on patch will be sent adding a sysctl that allows an admin to
avoid the nexthop expansion and truly get constant route insert time
regardless of the number of paths in a route! (Useful once all programs
used for a deployment that care about routes understand nexthop objects).
To be clear, 'ip' is used for benchmarking for no other reason than
'ip -batch' is a trivial to use for the tests. FRR, for example, better
manages nexthops and route changes and the way those are pushed to the
kernel and thus will have less userspace processing times than 'ip -batch'.
Patches 1-10 iterate over fib6_nh with a nexthop invoke a processing
function per fib6_nh. Prior to nexthop objects, a fib6_info referenced
a single fib6_nh. Multipath routes were added as separate fib6_info for
each leg of the route and linked as siblings:
f6i -> sibling -> sibling ... -> sibling
| |
+--------- multipath route ---------+
With nexthop objects a single fib6_info references an external
nexthop which may have a series of fib6_nh:
f6i ---> nexthop ---> fib6_nh
...
fib6_nh
making IPv6 routes similar to IPv4. The side effect is that a single
fib6_info now indirectly references a series of fib6_nh so the code
needs to walk each entry and call the local, per-fib6_nh processing
function.
Patches 11 and 13 wire up use of nexthops with fib entries for IPv4
and IPv6. With these commits you can actually use nexthops with routes.
Patch 12 is an optimization for IPv4 when using nexthops in the most
predominant use case (no metrics).
Patches 14 handles replace of a nexthop config.
Patches 15-18 add update pmtu and redirect tests to use both old and
new routing.
Patches 19 and 20 add new tests for the nexthop infrastructure. The first
is single nexthop is used by multiple prefixes to communicate with remote
hosts. This is on top of the functional tests already committed. The
second verifies multipath selection.
v4
- changed return to 'goto out' in patch 9 since the rcu_read_lock is
held (noticed by Wei)
v3
- removed found arg in patch 7 and changed rt6_nh_remove_exception_rt
to return 1 when a match is found for an exception
v2
- changed ++i to i++ in patches 1 and 14 as noticed by DaveM
- improved commit message for patch 14 (nexthop replace)
- removed the skip_fib argument to remove_nexthop; vestige of an
older design
====================
Reviewed-By: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a version of router_multipath.sh that uses nexthop objects for
routes.
Ido requested a version that does not cause regressions with mlxsw
testing since it does not support nexthop objects yet.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests where multiple FIB entries use the same nexthop object. Generate
per-cpu cached routes for each by running ping on each cpu, and then
generate exceptions unique to each prefix (remote host) with different
mtus.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a second pass to icmp_redirect.sh to use nexthop objects for
routes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add routing setup using nexthop objects and repeat tests with
old and new routing.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the route add commands to a new function called setup_routing_old.
The '_old' refers to the classic way of installing routes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the block of code that runs a test and prints the verdict to a
new function, run_test.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for atomically upating a nexthop config.
When updating a nexthop, walk the lists of associated fib entries and
verify the new config is valid. Replace is done by swapping nh_info
for single nexthops - new config is applied to old nexthop struct, and
old config is moved to new nexthop struct. For nexthop groups the same
applies but for nh_group. In addition for groups the nh_parent reference
needs to be updated. The old config is released by calling __remove_nexthop
on the 'new' nexthop which now has the old config. This is done to avoid
messing around with the list_heads that track which fib entries are
using the nexthop.
After the swap of config data, bump the sequence counters for FIB entries
to invalidate any dst entries and send notifications to userspace. The
notifications include the new nexthop spec as well as any fib entries
using the updated nexthop struct.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for RTA_NH_ID attribute to allow a user to specify a
nexthop id to use with a route. fc_nh_id is added to fib6_config to
hold the value passed in the RTA_NH_ID attribute. If a nexthop id
is given, the gateway, device, encap and multipath attributes can
not be set.
Update ip6_route_del to check metric and protocol before nexthop
specs. If fc_nh_id is set, then it must match the id in the route
entry. Since IPv6 allows delete of a cached entry (an exception),
add ip6_del_cached_rt_nh to cycle through all of the fib6_nh in
a fib entry if it is using a nexthop.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Be optimistic about re-using a fib_info when nexthop id is given and
the route does not use metrics. Avoids a memory allocation which in
most cases is expected to be freed anyways.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for RTA_NH_ID attribute to allow a user to specify a
nexthop id to use with a route. fc_nh_id is added to fib_config to
hold the value passed in the RTA_NH_ID attribute. If a nexthop id
is given, the gateway, device, encap and multipath attributes can
not be set.
Update fib_nh_match to check ids on a route delete.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use nexthop_for_each_fib6_nh to call fib6_nh_mtu_change for each
fib6_nh in a nexthop for rt6_mtu_change_route. For __ip6_rt_update_pmtu,
we need to find the nexthop that correlates to the device and gateway
in the rt6_info.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use nexthop_for_each_fib6_nh and fib6_nh_find_match to find the
fib6_nh in a nexthop that correlates to the device and gateway
in the rt6_info.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a hook in __ip6_route_redirect to handle a nexthop struct in a
fib6_info. Use nexthop_for_each_fib6_nh and fib6_nh_redirect_match
to call ip6_redirect_nh_match for each fib6_nh looking for a match.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a hook in rt6_flush_exceptions, rt6_remove_exception_rt,
rt6_update_exception_stamp_rt, and rt6_age_exceptions to handle
nexthop struct in a fib6_info.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
