Currently, this driver calls clk_prepare and clk_unprepare from
interrupt context too but these should be called from sleepable
context only. To fix this issue, this commit splits out
clk_enable/disable and clk_prepare/unprepare, and it places
clk_prepare/unprepare calls into the module probe/remove function.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
See the PhD thesis in the comments in this patch for details, but to
summarize this adds a hacky "unwedge" feature to the dw_hdmi i2c bus to
workaround what appears to be a hardware errata. This relies on a
pinctrl entry to help change around muxing to perform the unwedge.
NOTE that the specific TV this was tested on was the "Samsung
UN40HU6950FXZA" and the specific port was the "STB" port.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502225336.206885-2-dianders@chromium.org
In certain situations it was seen that we could wedge up the DDC bus
on the HDMI adapter on rk3288. The only way to unwedge was to mux one
of the pins over to GPIO output-driven-low temporarily and then
quickly mux back. Full details can be found in the patch
("drm/bridge/synopsys: dw-hdmi: Add "unwedge" for ddc bus").
Since unwedge requires remuxing the pins, we first need to add to the
bindings so that we can specify what state the pins should be in for
unwedging.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502225336.206885-1-dianders@chromium.org
This patch shouldn't have been included in the pull request as it adds
a non-standard raw mode that is for debugging only. So revert
commit ead14a7075.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The assigment of FB_VMODE_NONINTERLACE to var->vmode should be a
bit-wise or of FB_VMODE_NONINTERLACE instead of an assignment,
otherwise the previous clearing of the FB_VMODE_MASK bits of
var->vmode makes no sense and is redundant.
Addresses-Coverity: ("Unused value")
Fixes: ad4e02d508 ("[media] vivid: add a simple framebuffer device for overlay testing")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
MT8183 will use a multi-planar format backed by a single buffer. Adapt
the existing code to be able to handle such frames instead of assuming
each frame is backed by two buffers.
Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
[acourbot: refactor, cleanup and split]
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix checkpatch alignment warning]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
If we only set the max_segment_size on the queue an IOMMU merge might
create bigger segments again, so limit the IOMMU merges as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we only set the max_segment_size on the queue an IOMMU merge might
create bigger segments again, so limit the IOMMU merges as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This driver does never uses dma_map_sg, so the setting is rather
pointless.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
NVMe uses PRPs (or optionally unlimited SGLs) for data transfers and
has no specific limit for a single DMA segement. Limiting the size
will cause problems because the block layer assumes PRP-ish devices
using a virt boundary mask don't have a segment limit. And while this
is true, we also really need to tell the DMA mapping layer about it,
otherwise dma-debug will trip over it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dev_err() is more appropriate for printing error messages inside
drivers, so switch to dev_err().
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann says:
====================
s390/qeth: fixes 2019-06-05
one more shot... now with patch 2 fixed up so that it uses the
dst entry returned from dst_check().
From the v1 cover letter:
Please apply the following set of qeth fixes to -net.
- The first two patches fix issues in the L3 driver's cast type
selection for transmitted skbs.
- Alexandra adds a sanity check when retrieving VLAN information from
neighbour address events.
- The last patch adds some missing error handling for qeth's new
multiqueue code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
netif_set_real_num_tx_queues() can return an error, deal with it.
Fixes: 73dc2daf11 ("s390/qeth: add TX multiqueue support for OSA devices")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enabling sysfs attribute bridge_hostnotify triggers a series of udev events
for the MAC addresses of all currently connected peers. In case no VLAN is
set for a peer, the device reports the corresponding MAC addresses with
VLAN ID 4096. This currently results in attribute VLAN=4096 for all
non-VLAN interfaces in the initial series of events after host-notify is
enabled.
Instead, no VLAN attribute should be reported in the udev event for
non-VLAN interfaces.
Only the initial events face this issue. For dynamic changes that are
reported later, the device uses a validity flag.
This also changes the code so that it now sets the VLAN attribute for
MAC addresses with VID 0. On Linux, no qeth interface will ever be
registered with VID 0: Linux kernel registers VID 0 on all network
interfaces initially, but qeth will drop .ndo_vlan_rx_add_vid for VID 0.
Peers with other OSs could register MACs with VID 0.
Fixes: 9f48b9db9a ("qeth: bridgeport support - address notifications")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While qeth_l3 uses netif_keep_dst() to hold onto the dst, a skb's dst
may still have been obsoleted (via dst_dev_put()) by the time that we
end up using it. The dst then points to the loopback interface, which
means the neighbour lookup in qeth_l3_get_cast_type() determines a bogus
cast type of RTN_BROADCAST.
For IQD interfaces this causes us to place such skbs on the wrong
HW queue, resulting in TX errors.
Fix-up the various call sites to first validate the dst entry with
dst_check(), and fall back accordingly.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When selecting the cast type of a neighbourless IPv4 skb (eg. on a raw
socket), qeth_l3 falls back to the packet's destination IP address.
For this case we should classify traffic sent to 255.255.255.255 as
broadcast.
This fixes DHCP requests, which were misclassified as unicast
(and for IQD interfaces thus ended up on the wrong HW queue).
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit says:
====================
r8169: factor out firmware handling
Let's factor out firmware handling into a separate source code file.
This simplifies reading the code and makes clearer what the interface
between driver and firmware handling is.
v2:
- fix small whitespace issue in patch 2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Let's factor out firmware handling into a separate source code file.
This simplifies reading the code and makes clearer what the interface
between driver and firmware handling is.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation of factoring out firmware handling rename r8169.c to
r8169_main.c.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix build errors in Mediatek mtk_eth_soc driver.
It looks like these 3 source files were meant to be linked together
since 2 of them are library-like functions,
but they are currently being built as 3 loadable modules.
Fixes these build errors:
WARNING: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/mediatek/mtk_eth_path.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/mediatek/mtk_sgmii.o
ERROR: "mtk_sgmii_init" [drivers/net/ethernet/mediatek/mtk_eth_soc.ko] undefined!
ERROR: "mtk_setup_hw_path" [drivers/net/ethernet/mediatek/mtk_eth_soc.ko] undefined!
ERROR: "mtk_sgmii_setup_mode_force" [drivers/net/ethernet/mediatek/mtk_eth_soc.ko] undefined!
ERROR: "mtk_sgmii_setup_mode_an" [drivers/net/ethernet/mediatek/mtk_eth_soc.ko] undefined!
ERROR: "mtk_w32" [drivers/net/ethernet/mediatek/mtk_eth_path.ko] undefined!
ERROR: "mtk_r32" [drivers/net/ethernet/mediatek/mtk_eth_path.ko] undefined!
This changes the loadable module name from mtk_eth_soc to mtk_eth.
I didn't see a way to leave it as mtk_eth_soc.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Nelson Chang <nelson.chang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function return 0 even when interrupted or try_get_cap_refs()
return error.
Fixes: 1199d7da2d ("ceph: simplify arguments and return semantics of try_get_cap_refs")
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
iput_final() may wait for reahahead pages. The wait can cause deadlock.
For example:
Workqueue: ceph-msgr ceph_con_workfn [libceph]
Call Trace:
schedule+0x36/0x80
io_schedule+0x16/0x40
__lock_page+0x101/0x140
truncate_inode_pages_range+0x556/0x9f0
truncate_inode_pages_final+0x4d/0x60
evict+0x182/0x1a0
iput+0x1d2/0x220
iterate_session_caps+0x82/0x230 [ceph]
dispatch+0x678/0xa80 [ceph]
ceph_con_workfn+0x95b/0x1560 [libceph]
process_one_work+0x14d/0x410
worker_thread+0x4b/0x460
kthread+0x105/0x140
ret_from_fork+0x22/0x40
Workqueue: ceph-msgr ceph_con_workfn [libceph]
Call Trace:
__schedule+0x3d6/0x8b0
schedule+0x36/0x80
schedule_preempt_disabled+0xe/0x10
mutex_lock+0x2f/0x40
ceph_check_caps+0x505/0xa80 [ceph]
ceph_put_wrbuffer_cap_refs+0x1e5/0x2c0 [ceph]
writepages_finish+0x2d3/0x410 [ceph]
__complete_request+0x26/0x60 [libceph]
handle_reply+0x6c8/0xa10 [libceph]
dispatch+0x29a/0xbb0 [libceph]
ceph_con_workfn+0x95b/0x1560 [libceph]
process_one_work+0x14d/0x410
worker_thread+0x4b/0x460
kthread+0x105/0x140
ret_from_fork+0x22/0x40
In above example, truncate_inode_pages_range() waits for readahead pages
while holding s_mutex. ceph_check_caps() waits for s_mutex and blocks
OSD dispatch thread. Later OSD replies (for readahead) can't be handled.
ceph_check_caps() also may lock snap_rwsem for read. So similar deadlock
can happen if iput_final() is called while holding snap_rwsem.
In general, it's not good to call iput_final() inside MDS/OSD dispatch
threads or while holding any mutex.
The fix is introducing ceph_async_iput(), which calls iput_final() in
workqueue.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We have three workqueue for inode works. Later patch will introduce
one more work for inode. It's not good to introcuce more workqueue
and add more 'struct work_struct' to 'struct ceph_inode_info'.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
b636fd38dc ("cgroup: Implement css_task_iter_skip()") introduced
css_task_iter_skip() which is used to fix task iterations skipping
dying threadgroup leaders with live threads. Skipping is implemented
as a subportion of full advancing but css_task_iter_next() forgot to
fully advance a skipped iterator before determining the next task to
visit causing it to return invalid task pointers.
Fix it by making css_task_iter_next() fully advance the iterator if it
has been skipped since the previous iteration.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: syzbot
Link: http://lkml.kernel.org/r/00000000000097025d058a7fd785@google.com
Fixes: b636fd38dc ("cgroup: Implement css_task_iter_skip()")
There is no need for initializing the 'ret' variable as it will
be assigned at:
ret = mipi_csis_parse_dt(pdev, state);
Remove the unneeded initialization.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Currently the return value from clk_bulk_prepare_enable() is checked,
but it is not propagate it in the case of failure.
Fix it and also move the error message to the caller of
mipi_csis_clk_enable().
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support on arm64.
We don't need any special handling for PTRACE_SYSEMU_SINGLESTEP.
It's quite difficult to generalize handling PTRACE_SYSEMU cross
architectures and avoid calls to tracehook_report_syscall_entry twice.
Different architecture have different mechanism to indicate NO_SYSCALL
and trying to generalise adds more code for no gain.
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
x86 and um use 31 and 32 for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP
while powerpc uses different value maybe for legacy reasons.
Though handling of PTRACE_SYSEMU can be made architecture independent,
it's hard to make these definations generic. To add to this existing
mess few architectures like arm, c6x and sh use 31 for PTRACE_GETFDPIC
(get the ELF fdpic loadmap address). It's not possible to move the
definations to generic headers.
So we unfortunately have to duplicate the same defination to ARM64 if
we need to support PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP.
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
While the TIF_SYSCALL_EMU is set in ptrace_resume independent of any
architecture, currently only powerpc and x86 unset the TIF_SYSCALL_EMU
flag in ptrace_disable which gets called from ptrace_detach.
Let's move the clearing of TIF_SYSCALL_EMU flag to __ptrace_unlink
which gets executed from ptrace_detach and also keep it along with
or close to clearing of TIF_SYSCALL_TRACE.
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change the way subdevices check if the stream is running. Verify the stream
pointer instead of src_frame. This makes easier to get rid of the void* and
u8* that points to frames in the subdevices structs.
Remove checks that s_stream does on subdevices. They are redundant since
the Media Controller Framework doesn't allow two streaming on the same
media pipeline at the same time.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This changes v4l2_pix_format and v4l2_plane_pix_format sizeimage
field description to allow v4l clients to set bigger image size
in case of variable length compressed data.
Presently s5p-mfc and mtk-vcodec codec drivers use that. Lets
make it obvious in the documentation.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
[What]
vce ring test fails consistently during resume in s3 cycle, due to
mismatch read & write pointers.
On debug/analysis its found that rptr to be compared is not being
correctly updated/read, which leads to this failure.
Below is the failure signature:
[drm:amdgpu_vce_ring_test_ring] *ERROR* amdgpu: ring 12 test failed
[drm:amdgpu_device_ip_resume_phase2] *ERROR* resume of IP block <vce_v3_0> failed -110
[drm:amdgpu_device_resume] *ERROR* amdgpu_device_ip_resume failed (-110).
[How]
fetch rptr appropriately, meaning move its read location further down
in the code flow.
With this patch applied the s3 failure is no more seen for >5k s3 cycles,
which otherwise is pretty consistent.
V2: remove reduntant fetch of rptr
Signed-off-by: Louis Li <Ching-shih.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Based on 1 normalized pattern(s):
this program is free software you may redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 3 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190116.162794791@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation you should have received a
copy of the gnu general public license along with this program if
not see http www gnu org licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 30 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.962665879@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
