When CYC packets are not available, it is still possible to count cycles
using TSC/TMA/MTC timestamps.
As the timestamp increments in TSC ticks, convert to CPU cycles using
the current core-to-bus ratio.
Do not accumulate cycles when control flow packet generation is not
enabled, nor when time has been "lost", typically due to mwait, which is
indicated by a TSC/TMA packet that is not part of PSB+.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-12-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add field 'ipc' to display instructions-per-cycle.
Example:
perf record -e intel_pt/cyc/u ls
perf script --insn-trace --xed -F+ipc,-dso,-cpu,-tid
ls 2670177.697113434: 7f0dfdbcd090 _start+0x0 mov %rsp, %rdi IPC: 0.00 (1/877)
ls 2670177.697113434: 7f0dfdbcd093 _start+0x3 callq 0x7f0dfdbce030
ls 2670177.697113434: 7f0dfdbce030 _dl_start+0x0 pushq %rbp
ls 2670177.697113434: 7f0dfdbce031 _dl_start+0x1 mov %rsp, %rbp
ls 2670177.697113434: 7f0dfdbce034 _dl_start+0x4 pushq %r15
ls 2670177.697113434: 7f0dfdbce036 _dl_start+0x6 pushq %r14
ls 2670177.697113434: 7f0dfdbce038 _dl_start+0x8 pushq %r13
ls 2670177.697113434: 7f0dfdbce03a _dl_start+0xa pushq %r12
ls 2670177.697113434: 7f0dfdbce03c _dl_start+0xc mov %rdi, %r12
ls 2670177.697113434: 7f0dfdbce03f _dl_start+0xf pushq %rbx
ls 2670177.697113434: 7f0dfdbce040 _dl_start+0x10 sub $0x38, %rsp
ls 2670177.697113434: 7f0dfdbce044 _dl_start+0x14 rdtsc
ls 2670177.697113434: 7f0dfdbce046 _dl_start+0x16 mov %eax, %eax
ls 2670177.697113434: 7f0dfdbce048 _dl_start+0x18 shl $0x20, %rdx
ls 2670177.697113434: 7f0dfdbce04c _dl_start+0x1c or %rax, %rdx
ls 2670177.697114471: 7f0dfdbce04f _dl_start+0x1f movq 0x27e22(%rip), %rax IPC: 0.00 (15/1685)
ls 2670177.697116177: 7f0dfdbce056 _dl_start+0x26 movq %rdx, 0x27683(%rip) IPC: 0.00 (1/881)
Note, the IPC values are low due to page faults at the beginning of
execution. The additional cycles are due to the time to enter the
kernel, not the actual kernel page fault handler.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Copy the incremental instruction count and cycle count onto 'instructions'
and 'branches' samples.
Because Intel PT does not update the cycle count on every branch or
instruction, the incremental values will often be zero.
When there are values, they will be the number of instructions and
number of cycles since the last update, and thus represent the average
IPC since the last IPC value.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for providing instructions-per-cycle (IPC) information,
accumulate cycle count from CYC packets.
Although CYC packets are optional (requires config term 'cyc' to enable
cycle-accurate mode when recording), the simplest way to count cycles is
with CYC packets.
The first complication is that cycles must be counted only when also
counting instructions.
That means when control flow packet generation is enabled i.e. between
TIP.PGE and TIP.PGD packets.
Also, sampling the cycle count follows the same rules as sampling the
timestamp, that is, not before the instruction to which the decoder is
walking is reached.
In addition, the cycle count is not accurate for any but the first
branch of a TNT packet.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When DWARF stacks were requested and at the same time that the user
specifies a register set using the --user-regs option the full register
context was being captured on samples:
$ perf record -g --call-graph dwarf,1024 --user-regs=IP,SP,BP -- stack_test2.g.O3
188143843893585 0x6b48 [0x4f8]: PERF_RECORD_SAMPLE(IP, 0x4002): 23828/23828: 0x401236 period: 1363819 addr: 0x7ffedbdd51ac
... FP chain: nr:0
... user regs: mask 0xff0fff ABI 64-bit
.... AX 0x53b
.... BX 0x7ffedbdd3cc0
.... CX 0xffffffff
.... DX 0x33d3a
.... SI 0x7f09b74c38d0
.... DI 0x0
.... BP 0x401260
.... SP 0x7ffedbdd3cc0
.... IP 0x401236
.... FLAGS 0x20a
.... CS 0x33
.... SS 0x2b
.... R8 0x7f09b74c3800
.... R9 0x7f09b74c2da0
.... R10 0xfffffffffffff3ce
.... R11 0x246
.... R12 0x401070
.... R13 0x7ffedbdd5db0
.... R14 0x0
.... R15 0x0
... ustack: size 1024, offset 0xe0
. data_src: 0x5080021
... thread: stack_test2.g.O:23828
...... dso: /root/abudanko/stacks/stack_test2.g.O3
I.e. the --user-regs=IP,SP,BP was being ignored, being overridden by the
needs of --call-graph=dwarf.
After applying the change in this patch the sample data contains the
user specified register, but making sure that at least the minimal set
of register needed for DWARF unwinding (DWARF_MINIMAL_REGS) is
requested.
The user is warned that DWARF unwinding may not work if extra registers
end up being needed.
-g call-graph dwarf,K full_regs
--user-regs=user_regs user_regs
-g call-graph dwarf,K --user-regs=user_regs user_regs + DWARF_MINIMAL_REGS
$ perf record -g --call-graph dwarf,1024 --user-regs=BP -- ls
WARNING: The use of --call-graph=dwarf may require all the user registers, specifying a subset with --user-regs may render DWARF unwinding unreliable, so the minimal registers set (IP, SP) is explicitly forced.
arch COPYING Documentation include Kbuild lbuild MAINTAINERS modules.builtin Module.symvers perf.data.old scripts System.map virt
block CREDITS drivers init Kconfig lib Makefile modules.builtin.modinfo net README security tools vmlinux
certs crypto fs ipc kernel LICENSES mm modules.order perf.data samples sound usr vmlinux.o
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ]
188368474305373 0x5e40 [0x470]: PERF_RECORD_SAMPLE(IP, 0x4002): 23839/23839: 0x401236 period: 1260507 addr: 0x7ffd3d85e96c
... FP chain: nr:0
... user regs: mask 0x1c0 ABI 64-bit
.... BP 0x401260
.... SP 0x7ffd3d85cc20
.... IP 0x401236
... ustack: size 1024, offset 0x58
. data_src: 0x5080021
Committer notes:
Detected build failures on arches where PERF_REGS_ is not available,
such as debian:experimental-x-{mips,mips64,mipsel}, fedora 24 and 30 for
ARC uClibc and glibc, reported to Alexey that provided a patch moving
the DWARF_MINIMAL_REGS from evsel.c to util/perf_regs.h, where it is
guarded by an HAVE_PERF_REGS_SUPPORT ifdef.
Committer testing:
# perf record --user-regs=bp,ax -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.955 MB perf.data (1773 samples) ]
# perf script -F+uregs | grep AX: | head -5
perf 1719 [000] 181.272398: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272402: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272403: 8 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272405: 181 cycles: ffffffffba06a7c6 native_write_msr+0x6 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272406: 4405 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
# perf record --call-graph=dwarf --user-regs=bp,ax -a sleep 1
WARNING: The use of --call-graph=dwarf may require all the user registers, specifying a subset with --user-regs may render DWARF unwinding unreliable, so the minimal registers set (IP, SP) is explicitly forced.
[ perf record: Woken up 55 times to write data ]
[ perf record: Captured and wrote 24.184 MB perf.data (2841 samples) ]
[root@quaco ~]# perf script --hide-call-graph -F+uregs | grep AX: | head -5
perf 1729 [000] 211.268006: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268014: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268017: 5 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268020: 48 cycles: ffffffffba06a7c6 native_write_msr+0x6 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268024: 490 cycles: ffffffffba00e471 intel_bts_enable_local+0x21 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
#
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/e7fd37b1-af22-0d94-a0dc-5895e803bbfe@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of filling in the struct v4l2_capability device_caps
field, fill in the struct video_device device_caps field.
That way the V4L2 core knows what the capabilities of the
video device are.
But this only really works if all drivers use this, so convert
this UVC gadget driver.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Instead of filling in the struct v4l2_capability device_caps
field, fill in the struct video_device device_caps field.
That way the V4L2 core knows what the capabilities of the
video device are.
But this only really works if all drivers use this, so convert
this SDR driver in this patch.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The Allwinner SoCs have a clocks controller supported in Linux, with a
matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Instead of filling in the struct v4l2_capability device_caps
field, fill in the struct video_device device_caps field.
That way the V4L2 core knows what the capabilities of the
video device are.
But this only really works if all drivers use this, so convert
all usb drivers in this patch.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
If CONFIG_FUNCTION_GRAPH_TRACER is enabled function
arch_counter_get_cntvct() is marked as notrace. However, function
__arch_counter_get_cntvct is marked as inline. If
CONFIG_OPTIMIZE_INLINING is set that will make the two functions
tracable which they shouldn't.
Rework so that functions __arch_counter_get_* are marked with
__always_inline so they will be inlined even if CONFIG_OPTIMIZE_INLINING
is turned on.
Fixes: 0ea415390c ("clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters")
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Instead of filling in the struct v4l2_capability device_caps
field, fill in the struct video_device device_caps field.
That way the V4L2 core knows what the capabilities of the
video device are.
But this only really works if all drivers use this, so convert
all radio drivers in this patch.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
It doesn't seem as if there is any particular need for kvm_lock to be a
spinlock, so convert the lock to a mutex so that sleepable functions (in
particular cond_resched()) can be called while holding it.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
__vmcs_writel uses volatile asm, so there is no need to insert another
one between the first and the second call to __vmcs_writel in order
to prevent unwanted code moves for 32bit targets.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While upstream gcc doesn't detect conflicts on cc (yet), it really
should, and hence "cc" should not be specified for asm()-s also having
"=@cc<cond>" outputs. (It is quite pointless anyway to specify a "cc"
clobber in x86 inline assembly, since the compiler assumes it to be
always clobbered, and has no means [yet] to suppress this behavior.)
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Fixes: bbc0b82392 ("KVM: nVMX: Capture VM-Fail via CC_{SET,OUT} in nested early checks")
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is the same as vm_vcpu_add_default, but it also takes a
kvm_vcpu_init struct pointer.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows aarch64 tests to run on more targets, such as the Arm
simulator that doesn't like KVM_ARM_TARGET_GENERIC_V8. And it also
allows aarch64 tests to provide vcpu features in struct kvm_vcpu_init.
Additionally it drops the unused memslot parameters.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
asm/smp.h is included by linux/smp.h and some drivers, in particular
irqchip drivers can access cpu_logical_map[] in order to perform SMP
affinity tasks. Make arm64 consistent with other architectures here.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In commit 06a916feca ("arm64: Expose SVE2 features for
userspace"), new hwcaps are added that are detected via fields in
the SVE-specific ID register ID_AA64ZFR0_EL1.
In order to check compatibility of secondary cpus with the hwcaps
established at boot, the cpufeatures code uses
__read_sysreg_by_encoding() to read this ID register based on the
sys_reg field of the arm64_elf_hwcaps[] table.
This leads to a kernel splat if an hwcap uses an ID register that
__read_sysreg_by_encoding() doesn't explicitly handle, as now
happens when exercising cpu hotplug on an SVE2-capable platform.
So fix it by adding the required case in there.
Fixes: 06a916feca ("arm64: Expose SVE2 features for userspace")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add the A64 compatible with a fallback to the A83T compatible.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The current code defines W1 clock gate to be at 0x1cc, overlaying it
with the IR gate.
Clock gate for r-apb1-w1 is at 0x1ec. This fixes issues with IR receiver
causing interrupt floods on H6 (because interrupt flags can't be cleared,
due to IR module's bus being disabled).
Fixes: b7c7b05065 ("clk: sunxi-ng: add support for H6 PRCM CCU")
Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Support for multiplanar and singleplanar formats is mutually exclusive,
at least in practice. In our attempt to unify support for support for
mplane and !mplane in v4l, let's get rid of the
->vidioc_enum_fmt_{vid,out}_cap_mplane() hooks and call
->vidioc_enum_fmt_{vid,out}_cap() instead.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
[hverkuil-cisco@xs4all.nl: fix typos: pirv -> priv and prov -> priv]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There is only one implementation of this function; just call it directly.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
same as previous patch: just place this in the caller, no need to
have an indirection for a structure initialization.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
