This change makes CONFIG_ZONE_DMA32 defuly y and allows users
to overwrite it only when CONFIG_EXPERT=y.
For the SoCs that do not need CONFIG_ZONE_DMA32, this is the
first step to manage all available memory by a single
zone(normal zone) to reduce the overhead of multiple zones.
The change also fixes a build error when CONFIG_NUMA=y and
CONFIG_ZONE_DMA32=n.
arch/arm64/mm/init.c:195:17: error: use of undeclared identifier 'ZONE_DMA32'
max_zone_pfns[ZONE_DMA32] = PFN_DOWN(max_zone_dma_phys());
Change since v1:
1. only expose CONFIG_ZONE_DMA32 when CONFIG_EXPERT=y
2. remove redundant IS_ENABLED(CONFIG_ZONE_DMA32)
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Even though they have got the same value, PMD_TYPE_SECT and PUD_TYPE_SECT
get used for kernel huge mappings. But before that first the table bit gets
cleared using leaf level PTE_TABLE_BIT. Though functionally they are same,
we should use page table level specific macros to be consistent as per the
MMU specifications. Create page table level specific wrappers for kernel
huge mapping entries and just drop mk_sect_prot() which does not have any
other user.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
cache_line_size is derived from CTR_EL0.CWG field and is called mostly
for I/O device drivers. For some platforms like the HiSilicon Kunpeng920
server SoC, cache line sizes are different between L1/2 cache and L3
cache while L1 cache line size is 64-byte and L3 is 128-byte, but
CTR_EL0.CWG is misreporting using L1 cache line size.
We shall correct the right value which is important for I/O performance.
Let's update the cache line size if it is detected from DT or PPTT
information.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Zhenfa Qiu <qiuzhenfa@hisilicon.com>
Reported-by: Zhenfa Qiu <qiuzhenfa@hisilicon.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
H6 DMA has more than 32 supported DRQs, which means that configuration
register is slightly rearranged. It also needs additional clock to be
enabled.
Add support for it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
H6 DMA has more than 32 possible DRQs. That means that current maximum
of 31 DRQs is not enough anymore.
Add a quirk which will set source and destination DRQ number.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DMA in H6 is similar to other DMA controller, except it is first which
supports more than 32 request sources and has 16 channels. It also needs
additional clock to be enabled.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When the kernel is compiled with CONFIG_KERNEL_MODE_NEON, some part of
the kernel may be able to use FPSIMD/SVE. This is for instance the case
for crypto code.
Any use of FPSIMD/SVE in the kernel are clearly marked by using the
function kernel_neon_{begin, end}. Furthermore, this can only be used
when may_use_simd() returns true.
The current implementation of may_use_simd() allows softirq to use
FPSIMD/SVE unless it is currently in use (i.e kernel_neon_busy is true).
When in use, softirqs usually fall back to a software method.
At the moment, as a softirq may use FPSIMD/SVE, softirqs are disabled
when touching the FPSIMD/SVE context. This has the drawback to disable
all softirqs even if they are not using FPSIMD/SVE.
Since a softirq is supposed to check may_use_simd() anyway before
attempting to use FPSIMD/SVE, there is limited reason to keep softirq
disabled when touching the FPSIMD/SVE context. Instead, we can simply
disable preemption and mark the FPSIMD/SVE context as in use by setting
CPU's fpsimd_context_busy flag.
Two new helpers {get, put}_cpu_fpsimd_context are introduced to mark
the area using FPSIMD/SVE context and they are used to replace
local_bh_{disable, enable}. The functions kernel_neon_{begin, end} are
also re-implemented to use the new helpers.
Additionally, double-underscored versions of the helpers are provided to
called when preemption is already disabled. These are only relevant on
paths where irqs are disabled anyway, so they are not needed for
correctness in the current code. Let's use them anyway though: this
marks critical sections clearly and will help to avoid mistakes during
future maintenance.
The change has been benchmarked on Linux 5.1-rc4 with defconfig.
On Juno2:
* hackbench 100 process 1000 (10 times)
* .7% quicker
On ThunderX 2:
* hackbench 1000 process 1000 (20 times)
* 3.4% quicker
Reviewed-by: Dave Martin <dave.martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The only external user of fpsimd_save() and fpsimd_flush_cpu_state() is
the KVM FPSIMD code.
A following patch will introduce a mechanism to acquire owernship of the
FPSIMD/SVE context for performing context management operations. Rather
than having to export the new helpers to get/put the context, we can just
introduce a new function to combine fpsimd_save() and
fpsimd_flush_cpu_state().
This has also the advantage to remove any external call of fpsimd_save()
and fpsimd_flush_cpu_state(), so they can be turned static.
Lastly, the new function can also be used in the PM notifier.
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The function sve_flush_cpu_state() has been removed in commit 21cdd7fd76
("KVM: arm64: Remove eager host SVE state saving").
So remove the associated prototype in asm/fpsimd.h.
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Apparently driver was never tested with DMA_PREP_INTERRUPT flag being
unset since it completely disables interrupt handling instead of skipping
the callbacks invocations, hence putting channel into unusable state.
The flag is always set by all of kernel drivers that use APB DMA, so let's
error out in otherwise case for consistency. It won't be difficult to
support that case properly if ever will be needed.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The trace buffer address is 40 bits wide.
The end of the buffer is set in the RWP register (lower 32 bits), and in
the RWPHI register (upper 8 bits).
Currently only the lower 32 bits are read, and this patch fixes it and
concatenates the upper 8 bits to the output address.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
To avoid testcase failures we need to enable the pgstes. This can be
done with /proc/sys/vm/allocate_pgste or with a linker option that
creates an S390_PGSTE program header.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[Fixed as outlined by kernel test robot <rong.a.chen@intel.com>]
There is nothing x86-specific in the test apart from the VM_MODE_P52V48_4K
which we can now replace with VM_MODE_DEFAULT. Thus let's move the file to
the main folder and enable it for aarch64 and s390x, too.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190523164309.13345-10-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The test is an adaption of the same test for x86. Note that there
are some differences in the way how s390x deals with the kvm_valid_regs
in struct kvm_run, so some of the tests had to be removed. Also this
test is not using the ucall() interface on s390x yet (which would need
some work to be usable on s390x), so it simply drops out of the VM with
a diag 0x501 breakpoint instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190523164309.13345-8-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
On s390x, there is a constraint that memory regions have to be aligned
to 1M (or running the VM will fail). Introduce a new "alignment" variable
in the vm_userspace_mem_region_add() function which now can be used for
both, huge page and s390x alignment requirements.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190523164309.13345-6-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[prepare for THP as outlined by Andrew Jones]
The struct kvm_vcpu_events code is only available on certain architectures
(arm, arm64 and x86). To be able to compile kvm_util.c also for other
architectures, we have to fence the code with __KVM_HAVE_VCPU_EVENTS.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190523164309.13345-3-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When an error occurs we should clean the error register then to return
Signed-off-by: Peng Ma <peng.ma@nxp.com>
[vkoul: change patch title]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
CMD of Source/Destination descriptor format should be lower of
struct fsl_qdma_engine number data address.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following warnings:
./include/drm/drm_mode_config.h:841: warning: Incorrect use of
kernel-doc format: * hdr_output_metadata_property: Connector
property containing hdr
./include/drm/drm_mode_config.h:918: warning: Function parameter or member 'hdr_output_metadata_property' not described in 'drm_mode_config'
./include/drm/drm_connector.h:1251: warning: Function parameter or member 'hdr_output_metadata' not described in 'drm_connector'
./include/drm/drm_connector.h:1251: warning: Function parameter or member 'hdr_sink_metadata' not described in 'drm_connector'
Also adds some property documentation for HDR Metadata Connector
Property in connector property create function.
v2: Fixed Sean Paul's review comments.
v3: Fixed Daniel Vetter's review comments, added the UAPI structure
definition section in kernel docs.
v4: Fixed Daniel Vetter's review comments.
v5: Added structure member references as per Daniel's suggestion.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: "Ville Syrjä" <ville.syrjala@linux.intel.com>
Cc: Hans Verkuil <hansverk@cisco.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Reviewed-by: Sean Paul <sean@poorly.run> (v1)
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
[danvet: Fix up markup: () for functions, & for structs. Style guide
also recommends to prepend struct for structures.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1559647022-7336-1-git-send-email-uma.shankar@intel.com
Convert the serial modem control signals to use the gpiod APIs rather
than the private platform callbacks.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Remove the empty serial modem control signal functions from hackkit
as these are unnecessary - the core code can copes fine without
these.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Convert the iPAQ H3xxx serial modem control signals to use the gpiod
APIs rather than custom callbacks into platform code.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Convert the Assabet serial modem control signals to use the gpiod APIs
rather than custom callbacks into platform code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
As suggested by Uwe, add a note indicating that the modem control
signals do not support interrupts, which precludes the driver from
using mctrl_gpio_init().
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add support for the generic mctrl gpio helper. This will allow us to
convert several board files to use the gpiod tables to assign GPIOs to
serial ports, rather than needing to have private function callbacks.
If the generic mctrl gpio helper fails, ignore the mctrl gpios rather
than preventing the (possibly console) serial port from being created.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
struct drm_fb_helper_crtc is now just a wrapper around drm_mode_set so
use that directly instead and attach it as a modeset array onto
drm_client_dev. drm_fb_helper will use this array to store its modesets
which means it will always initialize a drm_client, but it will not
register the client (callbacks) unless it's the generic fbdev emulation.
Code will later be moved to drm_client, so add code there in a new file
drm_client_modeset.c with MIT license to match drm_fb_helper.c.
The modeset connector array size is hardcoded for the cloned case to avoid
having to pass in a value from the driver. A value of 8 is chosen to err
on the safe side. This means that the max connector argument for
drm_fb_helper_init() and drm_fb_helper_fbdev_setup() isn't used anymore,
a todo entry for this is added.
In pan_display_atomic() restore_fbdev_mode_force() is used instead of
restore_fbdev_mode_atomic() because that one will later become internal
to drm_client_modeset.
Locking order:
1. drm_fb_helper->lock
2. drm_master_internal_acquire
3. drm_client_dev->modeset_mutex
v6: Improve commit message (Sam Ravnborg)
v3:
- Use full drm_client_init/release for the modesets (Daniel Vetter)
- drm_client_for_each_modeset: use lockdep_assert_held (Daniel Vetter)
- Hook up to Documentation/gpu/drm-client.rst (Daniel Vetter)
v2:
- Add modesets array to drm_client (Daniel Vetter)
- Use a new file for the modeset code (Daniel Vetter)
- File has to be MIT licensed (Emmanuel Vadot)
- Add copyrights from drm_fb_helper.c
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531140117.37751-3-noralf@tronnes.org
There are several clocks on the r9a06g032 which are currently not
enabled in their drivers that can be delegated to clock domain system
for power management. Therefore add support for clock domain
functionality to the r9a06g032 clock driver.
Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The driver is gaining power domain support, so add the new property
to the DT binding and update the examples.
Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Now all Renesas pin control drivers have been converted to use the new
non-GPIO helper macros, SH_PFC_PIN_NAMED() and SH_PFC_PIN_NAMED_CFG()
are no longer used. Remove them.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Update the SH-Mobile AG5 pin control driver to use the new macros for
describing pins without GPIO functionality. This replaces the use of
physical pin numbers on the SH-Mobile AG5 SoC (in 34x34 BGA package) by
symbolic enum values, referring to signal names.
Note that the user-visible names of these pins are still based on pin
numbers instead of signal names, to preserve DT backwards compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Update the R-Car E3 pin control driver to use the new macros for
describing pins without GPIO functionality. This replaces the use of
physical pin numbers on the R-Car E3 SoC (in 25x25 FCBGA package) by
symbolic enum values, referring to signal names.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Update the R-Car M3-N pin control driver to use the new macros for
describing pins without GPIO functionality. This replaces the use of
physical pin numbers on the R-Car M3-N SiP (in 39x39 BGA package) by
symbolic enum values, referring to signal names.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Update the R-Car M3-W pin control driver to use the new macros for
describing pins without GPIO functionality. This replaces the use of
physical pin numbers on the R-Car M3-W SiP (in 39x39 BGA package) by
symbolic enum values, referring to signal names.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Update the R-Car H3 ES2.0 and later pin control driver to use the new
macros for describing pins without GPIO functionality. This replaces
the use of physical pin numbers on the R-Car H3 ES2.0 SiP (in 39x39
BGA package) by symbolic enum values, referring to signal names.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Update the R-Car H3 ES1.x pin control driver to use the new macros for
describing pins without GPIO functionality. This replaces the use of
physical pin numbers on the R-Car H3 ES1.x SiP (in 39x39 BGA package) by
symbolic enum values, referring to signal names.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Update the R-Car H2 pin control driver to use the new macros for
describing pins without GPIO functionality. This replaces the use of
physical pin numbers on the R-Car H2 SoC (in 31x31 FCBGA package) by
symbolic enum values, referring to signal names.
Note that the user-visible names of these pins are still based on pin
numbers instead of signal names, to preserve DT backwards compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Update the R-Car M1A pin control driver to use the new macros for
describing pins without GPIO functionality. This replaces the use of
physical pin numbers on the R-Car M1A SoC (in 25x25 FCBGA package) by
symbolic enum values, referring to signal names.
Note that the user-visible names of these pins are still based on pin
numbers instead of signal names, to preserve DT backwards compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Update the EMMA Mobile EV2 pin control driver to use the new macros for
describing pins without GPIO functionality. This replaces the use of
physical pin numbers on the EMMA Mobile EV2 SoC (in 23x23 BGA package)
by symbolic enum values, referring to signal names.
Note that the user-visible names of these pins are still based on pin
numbers instead of signal names, to preserve DT backwards compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Add new macros for describing pins without GPIO functionality:
- NOGP_ALL() expands to a list of PIN_id values, to be used for
generating symbolic enum values,
- PINMUX_NOGP_ALL() expands to a list of sh_pfc_pin entries, to
list all pins and their capabilities.
Both macros depend on an SoC-specific CPU_ALL_NOGP() macro, to be
provided by each individual SoC pin control driver.
The new macros offer two advantages over the existing SH_PFC_PIN_NAMED()
and SH_PFC_PIN_NAMED_CFG() macros:
1. They do not rely on PIN_NUMBER() macros and physical pin numbering,
hence do not suffer from pin numbering confusion among different
SoC/SiP packages.
2. They are similar in spirit to the existing scheme for handling pins
with GPIO functionality.
Note that internal to the driver, non-GPIO pins use a sequential
numbering scheme which starts after the highest GPIO pin number in use.
This value is calculated automatically, using two new helper macros, for
systems with either 32-port bank (GP port style) or linear (PORT style)
pin space. Sample expansion:
GP_LAST = sizeof(union {
char dummy[0] __attribute__((deprecated, deprecated));
char GP_0_0[(0 * 32) + 0] __attribute__((deprecated, deprecated));
char GP_0_1[(0 * 32) + 1] __attribute__((deprecated, deprecated));
...
char GP_7_3[(7 * 32) + 3] __attribute__((deprecated, deprecated));
})
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
pm_clk_create() and pm_clk_add_clk() can fail only when running out of
memory. Hence there is no need to print error messages on failure, as
the memory allocation core already takes care of that.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
pm_clk_create() and pm_clk_add_clk() can fail only when running out of
memory. Hence there is no need to print error messages on failure, as
the memory allocation core already takes care of that.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
