Allow the user to specify a local engine index (as opposed to
class:index) that they can use to refer to a preset engine inside the
ctx->engine[] array defined by an earlier I915_CONTEXT_PARAM_ENGINES.
This will be useful for setting SSEU parameters on virtual engines that
are local to the context and do not have a valid global class:instance
lookup.
Note that due to the ambiguity in using class:instance with
ctx->engines[], if a user supplied engine map is active the user must
specify the engine to alter by its index into the ctx->engines[].
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-3-chris@chris-wilson.co.uk
Over the last few years, we have debated how to extend the user API to
support an increase in the number of engines, that may be sparse and
even be heterogeneous within a class (not all video decoders created
equal). We settled on using (class, instance) tuples to identify a
specific engine, with an API for the user to construct a map of engines
to capabilities. Into this picture, we then add a challenge of virtual
engines; one user engine that maps behind the scenes to any number of
physical engines. To keep it general, we want the user to have full
control over that mapping. To that end, we allow the user to constrain a
context to define the set of engines that it can access, order fully
controlled by the user via (class, instance). With such precise control
in context setup, we can continue to use the existing execbuf uABI of
specifying a single index; only now it doesn't automagically map onto
the engines, it uses the user defined engine map from the context.
v2: Fixup freeing of local on success of get_engines()
v3: Allow empty engines[]
v4: s/nengine/num_engines/
v5: Replace 64 limit on num_engines with a note that execbuf is
currently limited to only using the first 64 engines.
v6: Actually use the engines_mutex to guard the ctx->engines.
Testcase: igt/gem_ctx_engines
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-2-chris@chris-wilson.co.uk
Having hid the partially exposed new ABI from the PR, put it back again
for completion of context recovery. A significant part of context
recovery is the ability to reuse as much of the old context as is
feasible (to avoid expensive reconstruction). The biggest chunk kept
hidden at the moment is fine-control over the ctx->ppgtt (the GPU page
tables and associated translation tables and kernel maps), so make
control over the ctx->ppgtt explicit.
This allows userspace to create and share virtual memory address spaces
(within the limits of a single fd) between contexts they own, along with
the ability to query the contexts for the vm state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-1-chris@chris-wilson.co.uk
Add a few missing file and directory entries related to both
remoteproc and rpmsg.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Most other bus (for example, SPI, i2c) have the remove handler for
driver optional. Make remove handler for rpmsg driver optional too.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add missing qcom,remote-pid dt binding required for GLINK SMEM
which specifies the remote endpoint of the GLINK edge.
Fixes: 2b41d6c8e6 ("dt-bindings: soc: qcom: Extend GLINK to cover SMEM")
Reviewed-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Move the clock list to adsp_pil_data, make the pdc_reset optional and
make the driver directly enable the xo, sleep and core clocks.
The three clocks are previously toggled through the clock controller,
but that means the same hardware block needs to be mapped in both
drivers. Making the remoteproc driver enable the clocks is a nop when
using the clock controller, but allow us to remove the clocks from the
clock controller.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The SDM845 Audio DSP peripheral image loader binding describes the
properties needed to load and boot firmware on a Hexagon v56. Rename the
file and add the Compute DSP (CDSP) found in QCS404 to the binding.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
After "5918045c4ed4 drm/scheduler: rework job destruction", jobs are
only deleted when the timeout handler is able to be cancelled
successfully.
In case no timeout handler is running (timeout == MAX_SCHEDULE_TIMEOUT),
job cleanup would be skipped which may result in memory leaks.
Add the handling for the (timeout == MAX_SCHEDULE_TIMEOUT) case in
drm_sched_cleanup_jobs.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/306025/?series=60878&rev=2
We get a compiler warn about variable ‘tail_desc’ set but not used
drivers/dma/xilinx/xilinx_dma.c:1102:42: warning:
variable ‘tail_desc’ set but not used [-Wunused-but-set-variable]
struct xilinx_dma_tx_descriptor *desc, *tail_desc;
So remove it.
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When a process signals the audit daemon (shutdown, rotate, resume,
reconfig) but syscall auditing is not enabled, we still want to know the
identity of the process sending the signal to the audit daemon.
Move audit_signal_info() out of syscall auditing to general auditing but
create a new function audit_signal_info_syscall() to take care of the
syscall dependent parts for when syscall auditing is enabled.
Please see the github kernel audit issue
https://github.com/linux-audit/audit-kernel/issues/111
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Drivers cannot check the udata for validity when doing destroy as there
will be no way to report this error back to the uverbs.
Since udata is new for destroy no driver should start to use it - instead
drivers should opt for the ioctl interface and define it in a way where it
cannot fail due to incorrect data.
Remove the checks on udata construction so EFA is consistent with
everything else.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Commit 61697a6abd ("dm: eliminate 'split_discard_bios' flag from DM
target interface") incorrectly removed code from
__send_changing_extent_only() that is required to impose a per-target IO
boundary on IO that exceeds max_io_len_target_boundary(). Otherwise
"special" IO (e.g. DISCARD, WRITE SAME, WRITE ZEROES) can write beyond
where allowed.
Fix this by restoring the max_io_len_target_boundary() limit in
__send_changing_extent_only()
Fixes: 61697a6abd ("dm: eliminate 'split_discard_bios' flag from DM target interface")
Cc: stable@vger.kernel.org # 5.1+
Signed-off-by: Michael Lass <bevan@bi-co.net>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
A handler for BATADV_TVLV_ROAM was being registered when the
translation-table was initialized, but not unregistered when the
translation-table was freed. Unregister it.
Fixes: 122edaa059 ("batman-adv: tvlv - convert roaming adv packet to use tvlv unicast packets")
Reported-by: syzbot+d454a826e670502484b8@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
soc_pcm_components_open/close() try to call
try_module_get()/module_put() based on
component->driver->module_get_upon_open.
Here, the purpose why we need to call these functions are to
checking module reference.
Thus, we need to call try_module_open() even though it doesn't
have .open callback.
The same reason, we need to call module_put() even though it
doesn't have .close
This patch calls try_module_get()/module_put() regardless of
.open/.close
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When disconnecting cdc_ncm the kernel sporadically crashes shortly
after the disconnect:
[ 57.868812] Unable to handle kernel NULL pointer dereference at virtual address 00000000
...
[ 58.006653] PC is at 0x0
[ 58.009202] LR is at call_timer_fn+0xec/0x1b4
[ 58.013567] pc : [<0000000000000000>] lr : [<ffffff80080f5130>] pstate: 00000145
[ 58.020976] sp : ffffff8008003da0
[ 58.024295] x29: ffffff8008003da0 x28: 0000000000000001
[ 58.029618] x27: 000000000000000a x26: 0000000000000100
[ 58.034941] x25: 0000000000000000 x24: ffffff8008003e68
[ 58.040263] x23: 0000000000000000 x22: 0000000000000000
[ 58.045587] x21: 0000000000000000 x20: ffffffc68fac1808
[ 58.050910] x19: 0000000000000100 x18: 0000000000000000
[ 58.056232] x17: 0000007f885aff8c x16: 0000007f883a9f10
[ 58.061556] x15: 0000000000000001 x14: 000000000000006e
[ 58.066878] x13: 0000000000000000 x12: 00000000000000ba
[ 58.072201] x11: ffffffc69ff1db30 x10: 0000000000000020
[ 58.077524] x9 : 8000100008001000 x8 : 0000000000000001
[ 58.082847] x7 : 0000000000000800 x6 : ffffff8008003e70
[ 58.088169] x5 : ffffffc69ff17a28 x4 : 00000000ffff138b
[ 58.093492] x3 : 0000000000000000 x2 : 0000000000000000
[ 58.098814] x1 : 0000000000000000 x0 : 0000000000000000
...
[ 58.205800] [< (null)>] (null)
[ 58.210521] [<ffffff80080f5298>] expire_timers+0xa0/0x14c
[ 58.215937] [<ffffff80080f542c>] run_timer_softirq+0xe8/0x128
[ 58.221702] [<ffffff8008081120>] __do_softirq+0x298/0x348
[ 58.227118] [<ffffff80080a6304>] irq_exit+0x74/0xbc
[ 58.232009] [<ffffff80080e17dc>] __handle_domain_irq+0x78/0xac
[ 58.237857] [<ffffff8008080cf4>] gic_handle_irq+0x80/0xac
...
The crash happens roughly 125..130ms after the disconnect. This
correlates with the 'delay' timer that is started on certain USB tx/rx
errors in the URB completion handler.
The problem is a race of usbnet_stop() with usbnet_start_xmit(). In
usbnet_stop() we call usbnet_terminate_urbs() to cancel all URBs in
flight. This only makes sense if no new URBs are submitted
concurrently, though. But the usbnet_start_xmit() can run at the same
time on another CPU which almost unconditionally submits an URB. The
error callback of the new URB will then schedule the timer after it was
already stopped.
The fix adds a check if the tx queue is stopped after the tx list lock
has been taken. This should reliably prevent the submission of new URBs
while usbnet_terminate_urbs() does its job. The same thing is done on
the rx side even though it might be safe due to other flags that are
checked there.
Signed-off-by: Jan Klötzke <Jan.Kloetzke@preh.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
DEV_ADDR is defined but not used. Use it in address setting.
Do the same with IPv6 for consistency.
Reported-by: David Ahern <dsahern@gmail.com>
Fixes: fc82d93e57 ("selftests: fib_rule_tests: fix local IPv4 address typo")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SPI controllers have a bunch of generic options that are needed in a
device tree. Add a YAML schemas for those.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since acdf52d97f ("selinux: convert to kvmalloc"), these check whether
an address-of value is NULL, which is pointless.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This adds a new driver identity "madera-micsupp" and probe function
so that this driver can be used to control the micsupp regulator on
Cirrus Logic Madera codecs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds a new driver identity "madera-ldo1" and probe function
so that this driver can be used to control the LDO1 regulator on
some Cirrus Logic Madera codecs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Arizona regulator drivers are now also used by the Cirrus Logic
Madera audio CODECs, update the binding document to link to the primary
binding document for these as well as the existing Arizona document.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes some spelling typos found in ip-sysctl.txt
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv6 does not consider if the socket is bound to a device when binding
to an address. The result is that a socket can be bound to eth0 and
then bound to the address of eth1. If the device is a VRF, the result
is that a socket can only be bound to an address in the default VRF.
Resolve by considering the device if sk_bound_dev_if is set.
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do not update the link interface mode while the link is down to avoid
spurious link interface changes.
Always call mac_config if we have a PHY to propagate the pause mode
settings to the MAC.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a racing condition in ipheth.c that can lead to slow performance.
Bug: In ipheth_tx(), netif_wake_queue() may be called on the callback
ipheth_sndbulk_callback(), _before_ netif_stop_queue() is called.
When this happens, the queue is stopped longer than it needs to be,
thus reducing network performance.
Fix: Move netif_stop_queue() in front of usb_submit_urb(). Now the order
is always correct. In case, usb_submit_urb() fails, the queue is woken up
again as callback will not fire.
Testing: This racing condition is usually not noticeable, as it has to
occur very frequently to slowdown the network. The callback from the USB
is usually triggered slow enough, so the situation does not appear.
However, on a Ubuntu Linux on VMWare Workstation, running on Windows 10,
the we loose the race quite often and the following speedup can be noticed:
Without this patch: Download: 4.10 Mbit/s, Upload: 4.01 Mbit/s
With this patch: Download: 36.23 Mbit/s, Upload: 17.61 Mbit/s
Signed-off-by: Oliver Zweigle <Oliver.Zweigle@faro.com>
Signed-off-by: Bernd Eckstein <3ernd.Eckstein@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull SELinux fix from Paul Moore:
"One small SELinux patch to fix a problem when disconnecting a SCTP
socket with connect(AF_UNSPEC)"
* tag 'selinux-pr-20190521' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: do not report error on connect(AF_UNSPEC)
While the endiannes is being handled properly sparse was unable to verify
this due to type inconsistency. So introduce an additional __le32
respectively _le64 variable to be passed to le32/64_to_cpu() to allow
sparse to verify proper typing. Note that this patch does not change
the generated binary on little-endian systems - on 32bit powerpc it
does change the binary.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull SPDX update from Greg KH:
"Here is a series of patches that add SPDX tags to different kernel
files, based on two different things:
- SPDX entries are added to a bunch of files that we missed a year
ago that do not have any license information at all.
These were either missed because the tool saw the MODULE_LICENSE()
tag, or some EXPORT_SYMBOL tags, and got confused and thought the
file had a real license, or the files have been added since the
last big sweep, or they were Makefile/Kconfig files, which we
didn't touch last time.
- Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
tools can determine the license text in the file itself. Where this
happens, the license text is removed, in order to cut down on the
700+ different ways we have in the kernel today, in a quest to get
rid of all of these.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers.
The reason for these "large" patches is if we were to continue to
progress at the current rate of change in the kernel, adding license
tags to individual files in different subsystems, we would be finished
in about 10 years at the earliest.
There will be more series of these types of patches coming over the
next few weeks as the tools and reviewers crunch through the more
"odd" variants of how to say "GPLv2" that developers have come up with
over the years, combined with other fun oddities (GPL + a BSD
disclaimer?) that are being unearthed, with the goal for the whole
kernel to be cleaned up.
These diffstats are not small, 3840 files are touched, over 10k lines
removed in just 24 patches"
* tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3
...
Pull crypto fixes from Herbert Xu:
- Two long-standing bugs in the powerpc assembly of vmx
- Stack overrun caused by HASH_MAX_DESCSIZE being too small
- Regression in caam
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: vmx - ghash: do nosimd fallback manually
crypto: vmx - CTR: always increment IV as quadword
crypto: hash - fix incorrect HASH_MAX_DESCSIZE
crypto: caam - fix typo in i.MX6 devices list for errata
mtk_regmap_update_bits() has been changed to take a shift and warn
when reg >= 0 but shift < 0.So the hd_align_mshift must not have shift.
Change it from XXX_HD_ALIGN_MASK_SFT to XXX_HD_ALIGN_MASK.
Fixes: cf61f5b015 ("ASoC: Mediatek: MT8183: set data align")
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
mtk_regmap_update_bits() has been changed from four
parameters to five parameters.
Fixes: 1628fc3f47 ("ASoC: Mediatek: MT8183: add memory interface data align")
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The same wait queue is initialized a couple of lines above.
Fixes: 3c2d774cad ("RDMA/nes: Add a driver for NetEffect RNICs")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to check existence of structures to be destroyed.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The destroy functions are always called with relevant structs, there is no
need to check their existence.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Kernel destroy CQ flows can't fail and the returned value of
ib_destroy_cq() is not interested in those flows.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are nothing to do from user side with knowledge that destroy CQ
fails.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no value in checking ib_destroy_cq() result and skipping to clear
struct ic fields. This connection needs to be reinitialized anyway.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We need to always call clkdm_clk_enable() and clkdm_clk_disable() even
the clkctrl clock(s) enabled for the domain do not have any gate register
bits. Otherwise clockdomains may never get enabled except when devices get
probed with the legacy "ti,hwmods" devicetree property.
Fixes: 88a172526c ("clk: ti: add support for clkctrl clocks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Restrict Kconfig scope for SiFive clock and reset IP block drivers
such that they won't appear on most configurations that are unlikely
to support them. This is based on a suggestion from Pavel Machek
<pavel@ucw.cz>. Ideally this should be dependent on
CONFIG_ARCH_SIFIVE, but since that Kconfig directive does not yet
exist, add dependencies on RISCV or COMPILE_TEST for now.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Cc: Michael Turquette <mturquette@baylibre.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
